LG8n: overlay: Remove Values that does not exist in LG8n Stock

Signed-off-by: Shirayuki39 <lorddemecrius83@proton.me>
This commit is contained in:
Shirayuki39 2024-07-20 00:47:27 +08:00
parent efbaf2dfed
commit 36666c0364

View file

@ -26,26 +26,6 @@
Software implementation will be used if config_hardware_auto_brightness_available is not set -->
<bool name="config_automatic_brightness_available">true</bool>
<!-- Array of hysteresis constraint values for brightening, represented as tenths of a
percent. The length of this array is assumed to be one greater than
config_ambientThresholdLevels. The brightening threshold is calculated as
lux * (1.0f + CONSTRAINT_VALUE). When the current lux is higher than this threshold,
the screen brightness is recalculated. See the config_ambientThresholdLevels
description for how the constraint value is chosen. -->
<integer-array name="config_ambientBrighteningThresholds">
<item>100</item>
</integer-array>
<!-- Array of hysteresis constraint values for darkening, represented as tenths of a
percent. The length of this array is assumed to be one greater than
config_ambientThresholdLevels. The darkening threshold is calculated as
lux * (1.0f - CONSTRAINT_VALUE). When the current lux is lower than this threshold,
the screen brightness is recalculated. See the config_ambientThresholdLevels
description for how the constraint value is chosen. -->
<integer-array name="config_ambientDarkeningThresholds">
<item>200</item>
</integer-array>
<!-- Array of desired screen brightness in nits corresponding to the lux values
in the config_autoBrightnessLevels array. The display brightness is defined as the measured
brightness of an all-white image.
@ -79,56 +59,6 @@
<item>255</item>
</integer-array>
<!-- An array describing the screen's backlight values corresponding to the brightness
values in the config_screenBrightnessNits array. -->
<integer-array name="config_screenBrightnessBacklight">
<item>1</item>
<item>15</item>
<item>30</item>
<item>45</item>
<item>60</item>
<item>75</item>
<item>90</item>
<item>105</item>
<item>120</item>
<item>135</item>
<item>150</item>
<item>165</item>
<item>180</item>
<item>195</item>
<item>210</item>
<item>225</item>
<item>240</item>
<item>255</item>
</integer-array>
<!-- An array of floats describing the screen brightness in nits corresponding to the backlight
values in the config_screenBrightnessBacklight array. On OLED displays these values
should be measured with an all white image while the display is in the fully on state.
Note that this value should *not* reflect the maximum brightness value for any high
brightness modes but only the maximum brightness value obtainable in a sustainable manner.
This array should be equal in size to config_screenBrightnessBacklight -->
<array name="config_screenBrightnessNits">
<item>1</item>
<item>15</item>
<item>30</item>
<item>45</item>
<item>60</item>
<item>75</item>
<item>90</item>
<item>105</item>
<item>120</item>
<item>135</item>
<item>150</item>
<item>165</item>
<item>180</item>
<item>195</item>
<item>210</item>
<item>225</item>
<item>240</item>
<item>255</item>
</array>
<!-- Array of light sensor lux values to define our levels for auto backlight brightness
support.
The N entries of this array define N + 1 control points as follows:
@ -170,26 +100,6 @@
<item>18432</item>
</integer-array>
<!-- Array of hysteresis constraint values for brightening, represented as tenths of a
percent. The length of this array is assumed to be one greater than
config_screenThresholdLevels. The brightening threshold is calculated as
screenBrightness * (1.0f + CONSTRAINT_VALUE). When the new screen brightness is higher
than this threshold, it is applied. See the config_screenThresholdLevels description for
how the constraint value is chosen. -->
<integer-array name="config_screenBrighteningThresholds">
<item>100</item>
</integer-array>
<!-- Array of hysteresis constraint values for darkening, represented as tenths of a
percent. The length of this array is assumed to be one greater than
config_screenThresholdLevels. The darkening threshold is calculated as
screenBrightness * (1.0f - CONSTRAINT_VALUE). When the new screen brightness is lower than
this threshold, it is applied. See the config_screenThresholdLevels description for how
the constraint value is chosen. -->
<integer-array name="config_screenDarkeningThresholds">
<item>200</item>
</integer-array>
<!-- Minimum screen brightness setting allowed by power manager.
The user is forbidden from setting the brightness below this level. -->
<item type="dimen" name="config_screenBrightnessSettingMinimumFloat">0.003921569</item>
@ -376,10 +286,31 @@
<!-- Pulled from Ren's TrebleDroid Pova 4 Pro overlay -->
<bool name="config_dozeAfterScreenOff">true</bool>
<bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
<integer name="config_defaultPeakRefreshRate">90</integer>
<integer name="config_defaultRefreshRate">90</integer>
<integer name="config_screenBrightnessDoze">5</integer>
<!-- Determines whether the shell features all run on another thread. -->
<bool name="config_enableShellMainThread">true</bool>
<!-- ComponentName of a dream to show whenever the system would otherwise have
gone to sleep. When the PowerManager is asked to go to sleep, it will instead
try to start this dream if possible. The dream should typically call startDozing()
to put the display into a low power state and allow the application processor
to be suspended. When the dream ends, the system will go to sleep as usual.
Specify the component name or an empty string if none.
Note that doze dreams are not subject to the same start conditions as ordinary dreams.
Doze dreams will run whenever the power manager is in a dozing state. -->
<string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
<!-- If true, the doze component is not started until after the screen has been
turned off and the screen off animation has been performed. -->
<bool name="config_dozeAfterScreenOffByDefault">true</bool>
<!-- Whether the always on display mode is available. -->
<bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
<!-- Control whether the always on display mode is enabled by default. This value will be used
during initialization when the setting is still null. -->
<bool name="config_dozeAlwaysOnEnabled">false</bool>
</resources>