LG8n: Readd overlay from pre-Reboot Branch

Signed-off-by: Shirayuki39 <lorddemecrius83@proton.me>

overlay/FrameworksResOverlay/res/values/config.xml

@@ -45,43 +45,6 @@
     <integer-array name="config_ambientDarkeningThresholds">
         <item>200</item>
     </integer-array>
-
-    <!-- Array of desired screen brightness in nits corresponding to the lux values
-         in the config_autoBrightnessLevels array. The display brightness is defined as the measured
-         brightness of an all-white image.
-
-         If this is defined then:
-            - config_autoBrightnessLcdBacklightValues should not be defined
-            - config_screenBrightnessNits must be defined
-            - config_screenBrightnessBacklight must be defined
-
-         This array should have size one greater than the size of the config_autoBrightnessLevels
-         array. The brightness values must be non-negative and non-decreasing. This must be
-         overridden in platform specific overlays -->
-    <array name="config_autoBrightnessDisplayValuesNits">
-        <item>4.522</item>
-        <item>20.246</item>
-        <item>55.509</item>
-        <item>74.653</item>
-        <item>82.757</item>
-        <item>93.15</item>
-        <item>117.678</item>
-        <item>138.666</item>
-        <item>164.847</item>
-        <item>189.157</item>
-        <item>207.656</item>
-        <item>221.191</item>
-        <item>277.164</item>
-        <item>350.798</item>
-        <item>391.524</item>
-        <item>414.81</item>
-        <item>434.151</item>
-        <item>455.291</item>
-        <item>490.922</item>
-        <item>500</item>
-        <item>580</item>
-    </array>
-
     <!-- An array describing the screen's backlight values corresponding to the brightness
          values in the config_screenBrightnessNits array. -->
     <integer-array name="config_screenBrightnessBacklight">
@@ -112,24 +75,24 @@
          brightness modes but only the maximum brightness value obtainable in a sustainable manner.
          This array should be equal in size to config_screenBrightnessBacklight -->
     <array name="config_screenBrightnessNits">
-        <item>4.5215</item>
+         <item>1</item>
-        <item>33.37784</item>
+         <item>15</item>
-        <item>69.09702</item>
+         <item>30</item>
-        <item>105.53111</item>
+         <item>45</item>
-        <item>141.15657</item>
+         <item>60</item>
-        <item>177.40657</item>
+         <item>75</item>
-        <item>212.14172</item>
+         <item>90</item>
-        <item>247.64085</item>
+         <item>105</item>
-        <item>282.03754</item>
+         <item>120</item>
-        <item>317.2586</item>
+         <item>135</item>
-        <item>351.1292</item>
+         <item>150</item>
-        <item>384.87363</item>
+         <item>165</item>
-        <item>418.19705</item>
+         <item>180</item>
-        <item>451.90884</item>
+         <item>195</item>
-        <item>485.0235</item>
+         <item>210</item>
-        <item>517.10864</item>
+         <item>225</item>
-        <item>548.933</item>
+         <item>240</item>
-        <item>580</item>
+         <item>255</item>
     </array>
 
     <!-- Array of light sensor lux values to define our levels for auto backlight brightness
@@ -154,26 +117,23 @@
 
          Must be overridden in platform specific overlays -->
     <integer-array name="config_autoBrightnessLevels">
-        <item>6</item>
+         <item>128</item>
-        <item>18</item>
+         <item>256</item>
-        <item>34</item>
+         <item>384</item>
-        <item>82</item>
+         <item>512</item>
-        <item>128</item>
+         <item>640</item>
-        <item>256</item>
+         <item>768</item>
-        <item>384</item>
+         <item>896</item>
-        <item>512</item>
+         <item>1024</item>
-        <item>640</item>
+         <item>2048</item>
-        <item>768</item>
+         <item>4096</item>
-        <item>896</item>
+         <item>6144</item>
-        <item>1536</item>
+         <item>8192</item>
-        <item>2560</item>
+         <item>10240</item>
-        <item>3584</item>
+         <item>12288</item>
-        <item>4608</item>
+         <item>14336</item>
-        <item>5632</item>
+         <item>16384</item>
-        <item>7168</item>
+         <item>18432</item>
-        <item>8192</item>
-        <item>8704</item>
-        <item>9728</item>
     </integer-array>
 
     <!-- Array of hysteresis constraint values for brightening, represented as tenths of a
@@ -198,7 +158,7 @@
 
     <!-- Minimum screen brightness setting allowed by power manager.
          The user is forbidden from setting the brightness below this level.  -->
-    <item name="config_screenBrightnessSettingMinimumFloat" format="float" type="dimen">0.003921569</item>
+    <item type="dimen" name="config_screenBrightnessSettingMinimumFloat">0.003921569</item>
 
     <!-- Maximum screen brightness allowed by the power manager.
          The user is forbidden from setting the brightness above this level. -->
@@ -309,6 +269,9 @@
     <!-- Whether device supports double tap to wake -->
     <bool name="config_supportDoubleTapWake">true</bool>
 
+    <!-- Whether device uses power button fingerprint sensor or not -->
+    <bool name="config_is_powerbutton_fps">true</bool>
+
     <!-- Boolean indicating USSD over IMS is allowed.
      If it is not supported due to modem limitations, USSD send over the CS pipe instead.-->
     <bool name="config_allow_ussd_over_ims">true</bool>
@@ -360,4 +323,13 @@
          manager will disable alpha trasformation in animations where not
          strictly needed. -->
     <bool name="config_sf_limitedAlpha">true</bool>
+    <!-- Amount of time in ms the user needs to press the relevant keys to trigger the screenshot chord -->
+    <integer name="config_screenshotChordKeyTimeout">0</integer>
+
+    <!-- Pulled from Ren's TrebleDroid Pova 4 Pro overlay -->
+    <bool name="config_dozeAfterScreenOff">true</bool>
+    <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool>
+    <integer name="config_defaultPeakRefreshRate">121</integer>
+    <integer name="config_defaultRefreshRate">121</integer>
+    <integer name="config_screenBrightnessDoze">5</integer>
 </resources>

overlay/SystemUIOverlay/Android.bp

@@ -0,0 +1,12 @@
+//
+// Copyright (C) 2023 LineageOS
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+
+runtime_resource_overlay {
+    name: "SystemUIOverlay",
+    sdk_version: "current",
+    product_specific: true,
+    resource_dirs: ["res"]
+}

overlay/SystemUIOverlay/AndroidManifest.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2023 LineageOS
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+          http://www.apache.org/licenses/LICENSE-2.0
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<manifest xmlns:android="http://schemas.android.com/apk/res/android"
+    package="com.android.systemui.overlay">
+
+    <application android:hasCode="false" />
+    <overlay android:targetPackage="com.android.systemui" android:isStatic="true" android:priority="1" />
+</manifest>

overlay/SystemUIOverlay/res/values/dimens.xml

@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+ * Copyright (c) 2006, The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+*/
+-->
+<resources>
+    <!-- Location on the screen of the center of the fingerprint sensor. For devices with under
+     display fingerprint sensors, this directly corresponds to the fingerprint sensor's location.
+     For devices with sensors on the back of the device, this corresponds to the location on the
+     screen directly in front of the sensor.
+     By default, this is set to @null to use the horizontal center of the screen. -->
+    <dimen name="physical_fingerprint_sensor_center_screen_location_x">1080px</dimen>
+
+    <!-- Location on the screen of the center of the fingerprint sensor. For devices with under
+     display fingerprint sensors, this directly corresponds to the fingerprint sensor's location.
+     For devices with sensors on the back of the device, this corresponds to the location on the
+     screen directly in front of the sensor. -->
+    <dimen name="physical_fingerprint_sensor_center_screen_location_y">1100px</dimen>
+
+    <!-- Location on the screen of the center of the physical power button. This is a reasonable
+    default that should be overridden by device-specific overlays. -->
+    <dimen name="physical_power_button_center_screen_location_y">1100px</dimen>
+    
+    <dimen name="rounded_corner_content_padding">47.0px</dimen>
+    <dimen name="status_bar_padding_end">4.0dip</dimen>
+    <dimen name="status_bar_padding_start">4.0dip</dimen>
+</resources>