79 lines
2.7 KiB
Plaintext
79 lines
2.7 KiB
Plaintext
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
|
||
|
|
asic_health
|
||
|
|
|
||
|
|
Date: June 2018
|
||
|
|
KernelVersion: 4.19
|
||
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
||
|
|
Description: This file shows ASIC health status. The possible values are:
|
||
|
|
0 - health failed, 2 - health OK, 3 - ASIC in booting state.
|
||
|
|
|
||
|
|
The files are read only.
|
||
|
|
|
||
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
|
||
|
|
cpld1_version
|
||
|
|
cpld2_version
|
||
|
|
|
||
|
|
Date: June 2018
|
||
|
|
KernelVersion: 4.19
|
||
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
||
|
|
Description: These files show with which CPLD versions have been burned
|
||
|
|
on carrier and switch boards.
|
||
|
|
|
||
|
|
The files are read only.
|
||
|
|
|
||
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
|
||
|
|
Date: June 2018
|
||
|
|
KernelVersion: 4.19
|
||
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
||
|
|
Description: This file allows iio devices selection.
|
||
|
|
|
||
|
|
Attribute select_iio can be written with 0 or with 1. It
|
||
|
|
selects which one of iio devices can be accessed.
|
||
|
|
|
||
|
|
The file is read/write.
|
||
|
|
|
||
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
|
||
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
|
||
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
|
||
|
|
/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
|
||
|
|
Date: June 2018
|
||
|
|
KernelVersion: 4.19
|
||
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
||
|
|
Description: These files allow asserting system power cycling, switching
|
||
|
|
power supply units on and off and system's main power domain
|
||
|
|
shutdown.
|
||
|
|
Expected behavior:
|
||
|
|
When pwr_cycle is written 1: auxiliary power domain will go
|
||
|
|
down and after short period (about 1 second) up.
|
||
|
|
When psu1_on or psu2_on is written 1, related unit will be
|
||
|
|
disconnected from the power source, when written 0 - connected.
|
||
|
|
If both are written 1 - power supplies main power domain will
|
||
|
|
go down.
|
||
|
|
When pwr_down is written 1, system's main power domain will go
|
||
|
|
down.
|
||
|
|
|
||
|
|
The files are write only.
|
||
|
|
|
||
|
|
What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
|
||
|
|
reset_aux_pwr_or_ref
|
||
|
|
reset_asic_thermal
|
||
|
|
reset_hotswap_or_halt
|
||
|
|
reset_hotswap_or_wd
|
||
|
|
reset_fw_reset
|
||
|
|
reset_long_pb
|
||
|
|
reset_main_pwr_fail
|
||
|
|
reset_short_pb
|
||
|
|
reset_sw_reset
|
||
|
|
Date: June 2018
|
||
|
|
KernelVersion: 4.19
|
||
|
|
Contact: Vadim Pasternak <vadimpmellanox.com>
|
||
|
|
Description: These files show the system reset cause, as following: power
|
||
|
|
auxiliary outage or power refresh, ASIC thermal shutdown, halt,
|
||
|
|
hotswap, watchdog, firmware reset, long press power button,
|
||
|
|
short press power button, software reset. Value 1 in file means
|
||
|
|
this is reset cause, 0 - otherwise. Only one of the above
|
||
|
|
causes could be 1 at the same time, representing only last
|
||
|
|
reset cause.
|
||
|
|
|
||
|
|
The files are read only.
|