60 lines
1.5 KiB
Plaintext
60 lines
1.5 KiB
Plaintext
|
Devicetree bindings for Maxim MAX9485 Programmable Audio Clock Generator
|
||
|
|
||
|
This device exposes 4 clocks in total:
|
||
|
|
||
|
- MAX9485_MCLKOUT: A gated, buffered output of the input clock of 27 MHz
|
||
|
- MAX9485_CLKOUT: A PLL that can be configured to 16 different discrete
|
||
|
frequencies
|
||
|
- MAX9485_CLKOUT[1,2]: Two gated outputs for MAX9485_CLKOUT
|
||
|
|
||
|
MAX9485_CLKOUT[1,2] are children of MAX9485_CLKOUT which upchain all rate set
|
||
|
requests.
|
||
|
|
||
|
Required properties:
|
||
|
- compatible: "maxim,max9485"
|
||
|
- clocks: Input clock, must provice 27.000 MHz
|
||
|
- clock-names: Must be set to "xclk"
|
||
|
- #clock-cells: From common clock binding; shall be set to 1
|
||
|
|
||
|
Optional properties:
|
||
|
- reset-gpios: GPIO descriptor connected to the #RESET input pin
|
||
|
- vdd-supply: A regulator node for Vdd
|
||
|
- clock-output-names: Name of output clocks, as defined in common clock
|
||
|
bindings
|
||
|
|
||
|
If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
|
||
|
and "clkout2".
|
||
|
|
||
|
Clocks are defined as preprocessor macros in the dt-binding header.
|
||
|
|
||
|
Example:
|
||
|
|
||
|
#include <dt-bindings/clock/maxim,max9485.h>
|
||
|
|
||
|
xo-27mhz: xo-27mhz {
|
||
|
compatible = "fixed-clock";
|
||
|
#clock-cells = <0>;
|
||
|
clock-frequency = <27000000>;
|
||
|
};
|
||
|
|
||
|
&i2c0 {
|
||
|
max9485: audio-clock@63 {
|
||
|
reg = <0x63>;
|
||
|
compatible = "maxim,max9485";
|
||
|
clock-names = "xclk";
|
||
|
clocks = <&xo-27mhz>;
|
||
|
reset-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
|
||
|
vdd-supply = <&3v3-reg>;
|
||
|
#clock-cells = <1>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
// Clock consumer node
|
||
|
|
||
|
foo@0 {
|
||
|
compatible = "bar,foo";
|
||
|
/* ... */
|
||
|
clock-names = "foo-input-clk";
|
||
|
clocks = <&max9485 MAX9485_CLKOUT1>;
|
||
|
};
|