40 lines
1.3 KiB
Plaintext
40 lines
1.3 KiB
Plaintext
|
Broadcom BCM3380-style Level 1 / Level 2 interrupt controller
|
||
|
|
|
||
|
|
This interrupt controller shows up in various forms on many BCM338x/BCM63xx
|
||
|
|
chipsets. It has the following properties:
|
||
|
|
|
||
|
|
- outputs a single interrupt signal to its interrupt controller parent
|
||
|
|
|
||
|
|
- contains one or more enable/status word pairs, which often appear at
|
||
|
|
different offsets in different blocks
|
||
|
|
|
||
|
|
- no atomic set/clear operations
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
|
||
|
|
- compatible: should be "brcm,bcm3380-l2-intc"
|
||
|
|
- reg: specifies one or more enable/status pairs, in the following format:
|
||
|
|
<enable_reg 0x4 status_reg 0x4>...
|
||
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
||
|
|
- #interrupt-cells: specifies the number of cells needed to encode an interrupt
|
||
|
|
source, should be 1.
|
||
|
|
- interrupts: specifies the interrupt line in the interrupt-parent controller
|
||
|
|
node, valid values depend on the type of parent interrupt controller
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
|
||
|
|
- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
|
||
|
|
wakeup source for system suspend/resume.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
irq0_intc: interrupt-controller@10000020 {
|
||
|
|
compatible = "brcm,bcm3380-l2-intc";
|
||
|
|
reg = <0x10000024 0x4 0x1000002c 0x4>,
|
||
|
|
<0x10000020 0x4 0x10000028 0x4>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
interrupt-parent = <&cpu_intc>;
|
||
|
|
interrupts = <2>;
|
||
|
|
};
|