64 lines
1.8 KiB
Plaintext
64 lines
1.8 KiB
Plaintext
|
* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit)
|
||
|
|
|
||
|
|
The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C
|
||
|
|
controller and an USART. Only one function can be used at a time and is chosen
|
||
|
|
at boot time according to the device tree.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be "atmel,sama5d2-flexcom"
|
||
|
|
- reg: Should be the offset/length value for Flexcom dedicated
|
||
|
|
I/O registers (without USART, TWI or SPI registers).
|
||
|
|
- clocks: Should be the Flexcom peripheral clock from PMC.
|
||
|
|
- #address-cells: Should be <1>
|
||
|
|
- #size-cells: Should be <1>
|
||
|
|
- ranges: Should be one range for the full I/O register region
|
||
|
|
(including USART, TWI and SPI registers).
|
||
|
|
- atmel,flexcom-mode: Should be one of the following values:
|
||
|
|
- <1> for USART
|
||
|
|
- <2> for SPI
|
||
|
|
- <3> for I2C
|
||
|
|
|
||
|
|
Required child:
|
||
|
|
A single available child device of type matching the "atmel,flexcom-mode"
|
||
|
|
property.
|
||
|
|
|
||
|
|
The phandle provided by the clocks property of the child is the same as one for
|
||
|
|
the Flexcom parent.
|
||
|
|
|
||
|
|
For other properties, please refer to the documentations of the respective
|
||
|
|
device:
|
||
|
|
- ../serial/atmel-usart.txt
|
||
|
|
- ../spi/spi_atmel.txt
|
||
|
|
- ../i2c/i2c-at91.txt
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
flexcom@f8034000 {
|
||
|
|
compatible = "atmel,sama5d2-flexcom";
|
||
|
|
reg = <0xf8034000 0x200>;
|
||
|
|
clocks = <&flx0_clk>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <1>;
|
||
|
|
ranges = <0x0 0xf8034000 0x800>;
|
||
|
|
atmel,flexcom-mode = <2>;
|
||
|
|
|
||
|
|
spi@400 {
|
||
|
|
compatible = "atmel,at91rm9200-spi";
|
||
|
|
reg = <0x400 0x200>;
|
||
|
|
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_flx0_default>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
clocks = <&flx0_clk>;
|
||
|
|
clock-names = "spi_clk";
|
||
|
|
atmel,fifo-size = <32>;
|
||
|
|
|
||
|
|
mtd_dataflash@0 {
|
||
|
|
compatible = "atmel,at25f512b";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <20000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|