kernel_samsung_a34x-permissive/arch/arm/boot/dts/keystone-k2l-evm.dts

166 lines
2.8 KiB
Plaintext
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Keystone 2 Lamarr EVM device tree
*
* Copyright (C) 2014-2017 Texas Instruments Incorporated - http://www.ti.com/
*/
/dts-v1/;
#include "keystone.dtsi"
#include "keystone-k2l.dtsi"
/ {
compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone";
model = "Texas Instruments Keystone 2 Lamarr EVM";
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
dsp_common_memory: dsp-common-memory@81f800000 {
compatible = "shared-dma-pool";
reg = <0x00000008 0x1f800000 0x00000000 0x800000>;
reusable;
status = "okay";
};
};
};
&soc0 {
clocks {
refclksys: refclksys {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <122880000>;
clock-output-names = "refclk-sys";
};
};
};
&usb_phy {
status = "okay";
};
&keystone_usb0 {
status = "okay";
};
&usb0 {
dr_mode = "host";
};
&i2c0 {
dtt@50 {
compatible = "atmel,24c1024";
reg = <0x50>;
};
};
&aemif {
cs0 {
#address-cells = <2>;
#size-cells = <1>;
clock-ranges;
ranges;
ti,cs-chipselect = <0>;
/* all timings in nanoseconds */
ti,cs-min-turnaround-ns = <12>;
ti,cs-read-hold-ns = <6>;
ti,cs-read-strobe-ns = <23>;
ti,cs-read-setup-ns = <9>;
ti,cs-write-hold-ns = <8>;
ti,cs-write-strobe-ns = <23>;
ti,cs-write-setup-ns = <8>;
nand@0,0 {
compatible = "ti,keystone-nand","ti,davinci-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x4000000
1 0 0x0000100>;
ti,davinci-chipselect = <0>;
ti,davinci-mask-ale = <0x2000>;
ti,davinci-mask-cle = <0x4000>;
ti,davinci-mask-chipsel = <0>;
nand-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
nand-on-flash-bbt;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
read-only;
};
partition@100000 {
label = "params";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "ubifs";
reg = <0x180000 0x7FE80000>;
};
};
};
};
&spi0 {
nor_flash: n25q128a11@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "Micron,n25q128a11";
spi-max-frequency = <54000000>;
m25p,fast-read;
reg = <0>;
partition@0 {
label = "u-boot-spl";
reg = <0x0 0x80000>;
read-only;
};
partition@1 {
label = "misc";
reg = <0x80000 0xf80000>;
};
};
};
&mdio {
status = "ok";
ethphy0: ethernet-phy@0 {
compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
};
&dsp0 {
memory-region = <&dsp_common_memory>;
status = "okay";
};
&dsp1 {
memory-region = <&dsp_common_memory>;
status = "okay";
};
&dsp2 {
memory-region = <&dsp_common_memory>;
status = "okay";
};
&dsp3 {
memory-region = <&dsp_common_memory>;
status = "okay";
};