aubrey/kernel_samsung_a34x-permissive
1
0
Fork 0
Code Issues Pull requests Actions Packages Projects Releases Wiki Activity
kernel_samsung_a34x-permissive/arch/arm/boot/dts/qcom-msm8974.dtsi

1149 lines
24 KiB
Plaintext
Raw Permalink Normal View History

Import A346BXXU1AWB9 kernel source Android 13
2024-04-28 06:49:01 -07:00
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/ {
model = "Qualcomm MSM8974";
compatible = "qcom,msm8974";
interrupt-parent = <&intc>;
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
mpss@8000000 {
reg = <0x08000000 0x5100000>;
no-map;
};
mba@d100000 {
reg = <0x0d100000 0x100000>;
no-map;
};
reserved@d200000 {
reg = <0x0d200000 0xa00000>;
no-map;
};
adsp_region: adsp@dc00000 {
reg = <0x0dc00000 0x1900000>;
no-map;
};
venus@f500000 {
reg = <0x0f500000 0x500000>;
no-map;
};
smem_region: smem@fa00000 {
reg = <0xfa00000 0x200000>;
no-map;
};
tz@fc00000 {
reg = <0x0fc00000 0x160000>;
no-map;
};
rfsa@fd60000 {
reg = <0x0fd60000 0x20000>;
no-map;
};
rmtfs@fd80000 {
reg = <0x0fd80000 0x180000>;
no-map;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
interrupts = <1 9 0xf04>;
CPU0: cpu@0 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
cpu-idle-states = <&CPU_SPC>;
};
CPU1: cpu@1 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
cpu-idle-states = <&CPU_SPC>;
};
CPU2: cpu@2 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
qcom,acc = <&acc2>;
qcom,saw = <&saw2>;
cpu-idle-states = <&CPU_SPC>;
};
CPU3: cpu@3 {
compatible = "qcom,krait";
enable-method = "qcom,kpss-acc-v2";
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
qcom,acc = <&acc3>;
qcom,saw = <&saw3>;
cpu-idle-states = <&CPU_SPC>;
};
L2: l2-cache {
compatible = "cache";
cache-level = <2>;
qcom,saw = <&saw_l2>;
};
idle-states {
CPU_SPC: spc {
compatible = "qcom,idle-state-spc",
"arm,idle-state";
entry-latency-us = <150>;
exit-latency-us = <200>;
min-residency-us = <2000>;
};
};
};
thermal-zones {
cpu-thermal0 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 5>;
trips {
cpu_alert0: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu-thermal1 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 6>;
trips {
cpu_alert1: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit1: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu-thermal2 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 7>;
trips {
cpu_alert2: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit2: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
cpu-thermal3 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens 8>;
trips {
cpu_alert3: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit3: trip1 {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 7 0xf04>;
};
clocks {
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
timer {
compatible = "arm,armv7-timer";
interrupts = <1 2 0xf08>,
<1 3 0xf08>,
<1 4 0xf08>,
<1 1 0xf08>;
clock-frequency = <19200000>;
};
adsp-pil {
compatible = "qcom,msm8974-adsp-pil";
interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
cx-supply = <&pm8841_s2>;
clocks = <&xo_board>;
clock-names = "xo";
memory-region = <&adsp_region>;
qcom,smem-states = <&adsp_smp2p_out 0>;
qcom,smem-state-names = "stop";
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
};
smp2p-adsp {
compatible = "qcom,smp2p";
qcom,smem = <443>, <429>;
interrupt-parent = <&intc>;
interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 10>;
qcom,local-pid = <0>;
qcom,remote-pid = <2>;
adsp_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
adsp_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-modem {
compatible = "qcom,smp2p";
qcom,smem = <435>, <428>;
interrupt-parent = <&intc>;
interrupts = <0 27 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 14>;
qcom,local-pid = <0>;
qcom,remote-pid = <1>;
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smp2p-wcnss {
compatible = "qcom,smp2p";
qcom,smem = <451>, <431>;
interrupt-parent = <&intc>;
interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 18>;
qcom,local-pid = <0>;
qcom,remote-pid = <4>;
wcnss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
#qcom,smem-state-cells = <1>;
};
wcnss_smp2p_in: slave-kernel {
qcom,entry-name = "slave-kernel";
interrupt-controller;
#interrupt-cells = <2>;
};
};
smsm {
compatible = "qcom,smsm";
#address-cells = <1>;
#size-cells = <0>;
qcom,ipc-1 = <&apcs 8 13>;
qcom,ipc-2 = <&apcs 8 9>;
qcom,ipc-3 = <&apcs 8 19>;
apps_smsm: apps@0 {
reg = <0>;
#qcom,smem-state-cells = <1>;
};
modem_smsm: modem@1 {
reg = <1>;
interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
adsp_smsm: adsp@2 {
reg = <2>;
interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
wcnss_smsm: wcnss@7 {
reg = <7>;
interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
firmware {
scm {
compatible = "qcom,scm";
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
clock-names = "core", "bus", "iface";
};
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
};
apcs: syscon@f9011000 {
compatible = "syscon";
reg = <0xf9011000 0x1000>;
};
qfprom: qfprom@fc4bc000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,qfprom";
reg = <0xfc4bc000 0x1000>;
tsens_calib: calib@d0 {
reg = <0xd0 0x18>;
};
tsens_backup: backup@440 {
reg = <0x440 0x10>;
};
};
tsens: thermal-sensor@fc4a8000 {
compatible = "qcom,msm8974-tsens";
reg = <0xfc4a8000 0x2000>;
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
nvmem-cell-names = "calib", "calib_backup";
#thermal-sensor-cells = <1>;
};
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
clock-frequency = <19200000>;
frame@f9021000 {
frame-number = <0>;
interrupts = <0 8 0x4>,
<0 7 0x4>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <0 9 0x4>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <0 10 0x4>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <0 11 0x4>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <0 12 0x4>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <0 13 0x4>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <0 14 0x4>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
saw0: power-controller@f9089000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
};
saw1: power-controller@f9099000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
};
saw2: power-controller@f90a9000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
};
saw3: power-controller@f90b9000 {
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
};
saw_l2: power-controller@f9012000 {
compatible = "qcom,saw2";
reg = <0xf9012000 0x1000>;
regulator;
};
acc0: clock-controller@f9088000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
};
acc1: clock-controller@f9098000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
};
acc2: clock-controller@f90a8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
};
acc3: clock-controller@f90b8000 {
compatible = "qcom,kpss-acc-v2";
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
tcsr: syscon@fd4a0000 {
compatible = "syscon";
reg = <0xfd4a0000 0x10000>;
};
tcsr_mutex_block: syscon@fd484000 {
compatible = "syscon";
reg = <0xfd484000 0x2000>;
};
mmcc: clock-controller@fd8c0000 {
compatible = "qcom,mmcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfd8c0000 0x6000>;
};
tcsr_mutex: tcsr-mutex {
compatible = "qcom,tcsr-mutex";
syscon = <&tcsr_mutex_block 0 0x80>;
#hwlock-cells = <1>;
};
rpm_msg_ram: memory@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
blsp1_uart1: serial@f991d000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991d000 0x1000>;
interrupts = <0 107 0x0>;
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <0 108 0x0>;
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
sdhci@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 123 0>, <0 138 0>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
status = "disabled";
};
sdhci@f9864900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
<GIC_SPI 224 IRQ_TYPE_NONE>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
<&gcc GCC_SDCC3_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
status = "disabled";
};
sdhci@f98a4900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 125 0>, <0 221 0>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>,
<&xo_board>;
clock-names = "core", "iface", "xo";
status = "disabled";
};
otg: usb@f9a55000 {
compatible = "qcom,ci-hdrc";
reg = <0xf9a55000 0x200>,
<0xf9a55200 0x200>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
<&gcc GCC_USB_HS_SYSTEM_CLK>;
clock-names = "iface", "core";
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
assigned-clock-rates = <75000000>;
resets = <&gcc GCC_USB_HS_BCR>;
reset-names = "core";
phy_type = "ulpi";
dr_mode = "otg";
ahb-burst-config = <0>;
phy-names = "usb-phy";
status = "disabled";
#reset-cells = <1>;
ulpi {
usb_hs1_phy: phy@a {
compatible = "qcom,usb-hs-phy-msm8974",
"qcom,usb-hs-phy";
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
reset-names = "phy", "por";
status = "disabled";
};
usb_hs2_phy: phy@b {
compatible = "qcom,usb-hs-phy-msm8974",
"qcom,usb-hs-phy";
#phy-cells = <0>;
clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
clock-names = "ref", "sleep";
resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
reset-names = "phy", "por";
status = "disabled";
};
};
};
rng@f9bff000 {
compatible = "qcom,prng";
reg = <0xf9bff000 0x200>;
clocks = <&gcc GCC_PRNG_AHB_CLK>;
clock-names = "core";
};
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8974-pinctrl";
reg = <0xfd510000 0x4000>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <0 208 0>;
};
i2c@f9924000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9924000 0x1000>;
interrupts = <0 96 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
blsp_i2c8: i2c@f9964000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9964000 0x1000>;
interrupts = <0 102 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
};
blsp_i2c11: i2c@f9967000 {
status = "disabled";
compatible = "qcom,i2c-qup-v2.1.1";
reg = <0xf9967000 0x1000>;
interrupts = <0 105 IRQ_TYPE_NONE>;
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
dma-names = "tx", "rx";
};
spmi_bus: spmi@fc4cf000 {
compatible = "qcom,spmi-pmic-arb";
reg-names = "core", "intr", "cnfg";
reg = <0xfc4cf000 0x1000>,
<0xfc4cb000 0x1000>,
<0xfc4ca000 0x1000>;
interrupt-names = "periph_irq";
interrupts = <0 190 0>;
qcom,ee = <0>;
qcom,channel = <0>;
#address-cells = <2>;
#size-cells = <0>;
interrupt-controller;
#interrupt-cells = <4>;
};
blsp2_dma: dma-controller@f9944000 {
compatible = "qcom,bam-v1.4.0";
reg = <0xf9944000 0x19000>;
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
clock-names = "bam_clk";
#dma-cells = <1>;
qcom,ee = <0>;
};
etr@fc322000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0xfc322000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
port {
etr_in: endpoint {
slave-mode;
remote-endpoint = <&replicator_out0>;
};
};
};
tpiu@fc318000 {
compatible = "arm,coresight-tpiu", "arm,primecell";
reg = <0xfc318000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
port {
tpiu_in: endpoint {
slave-mode;
remote-endpoint = <&replicator_out1>;
};
};
};
replicator@fc31c000 {
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
reg = <0xfc31c000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
replicator_out0: endpoint {
remote-endpoint = <&etr_in>;
};
};
port@1 {
reg = <1>;
replicator_out1: endpoint {
remote-endpoint = <&tpiu_in>;
};
};
port@2 {
reg = <0>;
replicator_in: endpoint {
slave-mode;
remote-endpoint = <&etf_out>;
};
};
};
};
etf@fc307000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0xfc307000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
etf_out: endpoint {
remote-endpoint = <&replicator_in>;
};
};
port@1 {
reg = <0>;
etf_in: endpoint {
slave-mode;
remote-endpoint = <&merger_out>;
};
};
};
};
funnel@fc31b000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0xfc31b000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/*
* Not described input ports:
* 0 - connected trought funnel to Audio, Modem and
* Resource and Power Manager CPU's
* 2...7 - not-connected
*/
port@1 {
reg = <1>;
merger_in1: endpoint {
slave-mode;
remote-endpoint = <&funnel1_out>;
};
};
port@8 {
reg = <0>;
merger_out: endpoint {
remote-endpoint = <&etf_in>;
};
};
};
};
funnel@fc31a000 {
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0xfc31a000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
/*
* Not described input ports:
* 0 - not-connected
* 1 - connected trought funnel to Multimedia CPU
* 2 - connected to Wireless CPU
* 3 - not-connected
* 4 - not-connected
* 6 - not-connected
* 7 - connected to STM
*/
port@5 {
reg = <5>;
funnel1_in5: endpoint {
slave-mode;
remote-endpoint = <&kpss_out>;
};
};
port@8 {
reg = <0>;
funnel1_out: endpoint {
remote-endpoint = <&merger_in1>;
};
};
};
};
funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
compatible = "arm,coresight-funnel", "arm,primecell";
reg = <0xfc345000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
kpss_in0: endpoint {
slave-mode;
remote-endpoint = <&etm0_out>;
};
};
port@1 {
reg = <1>;
kpss_in1: endpoint {
slave-mode;
remote-endpoint = <&etm1_out>;
};
};
port@2 {
reg = <2>;
kpss_in2: endpoint {
slave-mode;
remote-endpoint = <&etm2_out>;
};
};
port@3 {
reg = <3>;
kpss_in3: endpoint {
slave-mode;
remote-endpoint = <&etm3_out>;
};
};
port@8 {
reg = <0>;
kpss_out: endpoint {
remote-endpoint = <&funnel1_in5>;
};
};
};
};
etm@fc33c000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33c000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU0>;
port {
etm0_out: endpoint {
remote-endpoint = <&kpss_in0>;
};
};
};
etm@fc33d000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33d000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU1>;
port {
etm1_out: endpoint {
remote-endpoint = <&kpss_in1>;
};
};
};
etm@fc33e000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33e000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU2>;
port {
etm2_out: endpoint {
remote-endpoint = <&kpss_in2>;
};
};
};
etm@fc33f000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0xfc33f000 0x1000>;
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
clock-names = "apb_pclk", "atclk";
cpu = <&CPU3>;
port {
etm3_out: endpoint {
remote-endpoint = <&kpss_in3>;
};
};
};
};
smd {
compatible = "qcom,smd";
adsp {
interrupts = <0 156 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 8>;
qcom,smd-edge = <1>;
};
modem {
interrupts = <0 25 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 12>;
qcom,smd-edge = <0>;
};
rpm {
interrupts = <0 168 1>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
rpm_requests {
compatible = "qcom,rpm-msm8974";
qcom,smd-channels = "rpm_requests";
rpmcc: clock-controller {
compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
#clock-cells = <1>;
};
pm8841-regulators {
compatible = "qcom,rpm-pm8841-regulators";
pm8841_s1: s1 {};
pm8841_s2: s2 {};
pm8841_s3: s3 {};
pm8841_s4: s4 {};
pm8841_s5: s5 {};
pm8841_s6: s6 {};
pm8841_s7: s7 {};
pm8841_s8: s8 {};
};
pm8941-regulators {
compatible = "qcom,rpm-pm8941-regulators";
pm8941_s1: s1 {};
pm8941_s2: s2 {};
pm8941_s3: s3 {};
pm8941_l1: l1 {};
pm8941_l2: l2 {};
pm8941_l3: l3 {};
pm8941_l4: l4 {};
pm8941_l5: l5 {};
pm8941_l6: l6 {};
pm8941_l7: l7 {};
pm8941_l8: l8 {};
pm8941_l9: l9 {};
pm8941_l10: l10 {};
pm8941_l11: l11 {};
pm8941_l12: l12 {};
pm8941_l13: l13 {};
pm8941_l14: l14 {};
pm8941_l15: l15 {};
pm8941_l16: l16 {};
pm8941_l17: l17 {};
pm8941_l18: l18 {};
pm8941_l19: l19 {};
pm8941_l20: l20 {};
pm8941_l21: l21 {};
pm8941_l22: l22 {};
pm8941_l23: l23 {};
pm8941_l24: l24 {};
pm8941_lvs1: lvs1 {};
pm8941_lvs2: lvs2 {};
pm8941_lvs3: lvs3 {};
};
};
};
};
vreg_boost: vreg-boost {
compatible = "regulator-fixed";
regulator-name = "vreg-boost";
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
regulator-boot-on;
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-names = "default";
pinctrl-0 = <&boost_bypass_n_pin>;
};
vreg_vph_pwr: vreg-vph-pwr {
compatible = "regulator-fixed";
regulator-name = "vph-pwr";
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
};
Reference in a new issue Copy permalink