677 lines
15 KiB
Plaintext
677 lines
15 KiB
Plaintext
|
/*
|
||
|
|
* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 and
|
||
|
|
* only version 2 as published by the Free Software Foundation.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include "msm8916.dtsi"
|
||
|
|
#include "pm8916.dtsi"
|
||
|
|
#include "apq8016-sbc-soc-pins.dtsi"
|
||
|
|
#include "apq8016-sbc-pmic-pins.dtsi"
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
#include <dt-bindings/input/input.h>
|
||
|
|
#include <dt-bindings/sound/apq8016-lpass.h>
|
||
|
|
|
||
|
|
/*
|
||
|
|
* GPIO name legend: proper name = the GPIO line is used as GPIO
|
||
|
|
* NC = not connected (pin out but not routed from the chip to
|
||
|
|
* anything the board)
|
||
|
|
* "[PER]" = pin is muxed for [peripheral] (not GPIO)
|
||
|
|
* LSEC = Low Speed External Connector
|
||
|
|
* HSEC = High Speed External Connector
|
||
|
|
*
|
||
|
|
* Line names are taken from the schematic "DragonBoard410c"
|
||
|
|
* dated monday, august 31, 2015. Page 5 in particular.
|
||
|
|
*
|
||
|
|
* For the lines routed to the external connectors the
|
||
|
|
* lines are named after the 96Boards CE Specification 1.0,
|
||
|
|
* Appendix "Expansion Connector Signal Description".
|
||
|
|
*
|
||
|
|
* When the 96Board naming of a line and the schematic name of
|
||
|
|
* the same line are in conflict, the 96Board specification
|
||
|
|
* takes precedence, which means that the external UART on the
|
||
|
|
* LSEC is named UART0 while the schematic and SoC names this
|
||
|
|
* UART3. This is only for the informational lines i.e. "[FOO]",
|
||
|
|
* the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
|
||
|
|
* ones actually used for GPIO.
|
||
|
|
*/
|
||
|
|
|
||
|
|
/ {
|
||
|
|
aliases {
|
||
|
|
serial0 = &blsp1_uart2;
|
||
|
|
serial1 = &blsp1_uart1;
|
||
|
|
usid0 = &pm8916_0;
|
||
|
|
i2c0 = &blsp_i2c2;
|
||
|
|
i2c1 = &blsp_i2c6;
|
||
|
|
i2c3 = &blsp_i2c4;
|
||
|
|
spi0 = &blsp_spi5;
|
||
|
|
spi1 = &blsp_spi3;
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
stdout-path = "serial0";
|
||
|
|
};
|
||
|
|
|
||
|
|
reserved-memory {
|
||
|
|
ramoops@bff00000{
|
||
|
|
compatible = "ramoops";
|
||
|
|
reg = <0x0 0xbff00000 0x0 0x100000>;
|
||
|
|
|
||
|
|
record-size = <0x20000>;
|
||
|
|
console-size = <0x20000>;
|
||
|
|
ftrace-size = <0x20000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
soc {
|
||
|
|
pinctrl@1000000 {
|
||
|
|
gpio-line-names =
|
||
|
|
"[UART0_TX]", /* GPIO_0, LSEC pin 5 */
|
||
|
|
"[UART0_RX]", /* GPIO_1, LSEC pin 7 */
|
||
|
|
"[UART0_CTS_N]", /* GPIO_2, LSEC pin 3 */
|
||
|
|
"[UART0_RTS_N]", /* GPIO_3, LSEC pin 9 */
|
||
|
|
"[UART1_TX]", /* GPIO_4, LSEC pin 11 */
|
||
|
|
"[UART1_RX]", /* GPIO_5, LSEC pin 13 */
|
||
|
|
"[I2C0_SDA]", /* GPIO_8, LSEC pin 17 */
|
||
|
|
"[I2C0_SCL]", /* GPIO_7, LSEC pin 15 */
|
||
|
|
"[SPI1_DOUT]", /* SPI1_MOSI, HSEC pin 1 */
|
||
|
|
"[SPI1_DIN]", /* SPI1_MISO, HSEC pin 11 */
|
||
|
|
"[SPI1_CS]", /* SPI1_CS_N, HSEC pin 7 */
|
||
|
|
"[SPI1_SCLK]", /* SPI1_CLK, HSEC pin 9 */
|
||
|
|
"GPIO-B", /* LS_EXP_GPIO_B, LSEC pin 24 */
|
||
|
|
"GPIO-C", /* LS_EXP_GPIO_C, LSEC pin 25 */
|
||
|
|
"[I2C3_SDA]", /* HSEC pin 38 */
|
||
|
|
"[I2C3_SCL]", /* HSEC pin 36 */
|
||
|
|
"[SPI0_MOSI]", /* LSEC pin 14 */
|
||
|
|
"[SPI0_MISO]", /* LSEC pin 10 */
|
||
|
|
"[SPI0_CS_N]", /* LSEC pin 12 */
|
||
|
|
"[SPI0_CLK]", /* LSEC pin 8 */
|
||
|
|
"HDMI_HPD_N", /* GPIO 20 */
|
||
|
|
"USR_LED_1_CTRL",
|
||
|
|
"[I2C1_SDA]", /* GPIO_22, LSEC pin 21 */
|
||
|
|
"[I2C1_SCL]", /* GPIO_23, LSEC pin 19 */
|
||
|
|
"GPIO-G", /* LS_EXP_GPIO_G, LSEC pin 29 */
|
||
|
|
"GPIO-H", /* LS_EXP_GPIO_H, LSEC pin 30 */
|
||
|
|
"[CSI0_MCLK]", /* HSEC pin 15 */
|
||
|
|
"[CSI1_MCLK]", /* HSEC pin 17 */
|
||
|
|
"GPIO-K", /* LS_EXP_GPIO_K, LSEC pin 33 */
|
||
|
|
"[I2C2_SDA]", /* HSEC pin 34 */
|
||
|
|
"[I2C2_SCL]", /* HSEC pin 32 */
|
||
|
|
"DSI2HDMI_INT_N",
|
||
|
|
"DSI_SW_SEL_APQ",
|
||
|
|
"GPIO-L", /* LS_EXP_GPIO_L, LSEC pin 34 */
|
||
|
|
"GPIO-J", /* LS_EXP_GPIO_J, LSEC pin 32 */
|
||
|
|
"GPIO-I", /* LS_EXP_GPIO_I, LSEC pin 31 */
|
||
|
|
"GPIO-A", /* LS_EXP_GPIO_A, LSEC pin 23 */
|
||
|
|
"FORCED_USB_BOOT",
|
||
|
|
"SD_CARD_DET_N",
|
||
|
|
"[WCSS_BT_SSBI]",
|
||
|
|
"[WCSS_WLAN_DATA_2]", /* GPIO 40 */
|
||
|
|
"[WCSS_WLAN_DATA_1]",
|
||
|
|
"[WCSS_WLAN_DATA_0]",
|
||
|
|
"[WCSS_WLAN_SET]",
|
||
|
|
"[WCSS_WLAN_CLK]",
|
||
|
|
"[WCSS_FM_SSBI]",
|
||
|
|
"[WCSS_FM_SDI]",
|
||
|
|
"[WCSS_BT_DAT_CTL]",
|
||
|
|
"[WCSS_BT_DAT_STB]",
|
||
|
|
"NC",
|
||
|
|
"NC", /* GPIO 50 */
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC", /* GPIO 60 */
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"[CDC_PDM0_CLK]",
|
||
|
|
"[CDC_PDM0_SYNC]",
|
||
|
|
"[CDC_PDM0_TX0]",
|
||
|
|
"[CDC_PDM0_RX0]",
|
||
|
|
"[CDC_PDM0_RX1]",
|
||
|
|
"[CDC_PDM0_RX2]",
|
||
|
|
"GPIO-D", /* LS_EXP_GPIO_D, LSEC pin 26 */
|
||
|
|
"NC", /* GPIO 70 */
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC", /* GPIO 74 */
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"BOOT_CONFIG_0", /* GPIO 80 */
|
||
|
|
"BOOT_CONFIG_1",
|
||
|
|
"BOOT_CONFIG_2",
|
||
|
|
"BOOT_CONFIG_3",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"BOOT_CONFIG_5",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC", /* GPIO 90 */
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC", /* GPIO 100 */
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"SSBI_GPS",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"KEY_VOLP_N",
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"[LS_EXP_MI2S_WS]", /* GPIO 110 */
|
||
|
|
"NC",
|
||
|
|
"NC",
|
||
|
|
"[LS_EXP_MI2S_SCK]",
|
||
|
|
"[LS_EXP_MI2S_DATA0]",
|
||
|
|
"GPIO-E", /* LS_EXP_GPIO_E, LSEC pin 27 */
|
||
|
|
"NC",
|
||
|
|
"[DSI2HDMI_MI2S_WS]",
|
||
|
|
"[DSI2HDMI_MI2S_SCK]",
|
||
|
|
"[DSI2HDMI_MI2S_DATA0]",
|
||
|
|
"USR_LED_2_CTRL", /* GPIO 120 */
|
||
|
|
"SB_HS_ID";
|
||
|
|
};
|
||
|
|
|
||
|
|
dma@7884000 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
serial@78af000 {
|
||
|
|
label = "LS-UART0";
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&blsp1_uart1_default>;
|
||
|
|
pinctrl-1 = <&blsp1_uart1_sleep>;
|
||
|
|
};
|
||
|
|
|
||
|
|
serial@78b0000 {
|
||
|
|
label = "LS-UART1";
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&blsp1_uart2_default>;
|
||
|
|
pinctrl-1 = <&blsp1_uart2_sleep>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@78b6000 {
|
||
|
|
/* On Low speed expansion */
|
||
|
|
label = "LS-I2C0";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@78b8000 {
|
||
|
|
/* On High speed expansion */
|
||
|
|
label = "HS-I2C2";
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
adv_bridge: bridge@39 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
compatible = "adi,adv7533";
|
||
|
|
reg = <0x39>;
|
||
|
|
|
||
|
|
interrupt-parent = <&msmgpio>;
|
||
|
|
interrupts = <31 2>;
|
||
|
|
|
||
|
|
adi,dsi-lanes = <4>;
|
||
|
|
clocks = <&rpmcc RPM_SMD_BB_CLK2>;
|
||
|
|
clock-names = "cec";
|
||
|
|
|
||
|
|
pd-gpios = <&msmgpio 32 0>;
|
||
|
|
|
||
|
|
avdd-supply = <&pm8916_l6>;
|
||
|
|
v1p2-supply = <&pm8916_l6>;
|
||
|
|
v3p3-supply = <&pm8916_l17>;
|
||
|
|
|
||
|
|
pinctrl-names = "default","sleep";
|
||
|
|
pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
|
||
|
|
pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
|
||
|
|
#sound-dai-cells = <1>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
port@0 {
|
||
|
|
reg = <0>;
|
||
|
|
adv7533_in: endpoint {
|
||
|
|
remote-endpoint = <&dsi0_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
port@1 {
|
||
|
|
reg = <1>;
|
||
|
|
adv7533_out: endpoint {
|
||
|
|
remote-endpoint = <&hdmi_con>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c@78ba000 {
|
||
|
|
/* On Low speed expansion */
|
||
|
|
label = "LS-I2C1";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
spi@78b7000 {
|
||
|
|
/* On High speed expansion */
|
||
|
|
label = "HS-SPI1";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
spi@78b9000 {
|
||
|
|
/* On Low speed expansion */
|
||
|
|
label = "LS-SPI0";
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&msmgpio_leds>,
|
||
|
|
<&pm8916_gpios_leds>,
|
||
|
|
<&pm8916_mpps_leds>;
|
||
|
|
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
|
||
|
|
led@1 {
|
||
|
|
label = "apq8016-sbc:green:user1";
|
||
|
|
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "heartbeat";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led@2 {
|
||
|
|
label = "apq8016-sbc:green:user2";
|
||
|
|
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "mmc0";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led@3 {
|
||
|
|
label = "apq8016-sbc:green:user3";
|
||
|
|
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "mmc1";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led@4 {
|
||
|
|
label = "apq8016-sbc:green:user4";
|
||
|
|
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "none";
|
||
|
|
panic-indicator;
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led@5 {
|
||
|
|
label = "apq8016-sbc:yellow:wlan";
|
||
|
|
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "phy0tx";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
|
||
|
|
led@6 {
|
||
|
|
label = "apq8016-sbc:blue:bt";
|
||
|
|
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
|
||
|
|
linux,default-trigger = "bluetooth-power";
|
||
|
|
default-state = "off";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
sdhci@7824000 {
|
||
|
|
vmmc-supply = <&pm8916_l8>;
|
||
|
|
vqmmc-supply = <&pm8916_l5>;
|
||
|
|
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
|
||
|
|
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
sdhci@7864000 {
|
||
|
|
vmmc-supply = <&pm8916_l11>;
|
||
|
|
vqmmc-supply = <&pm8916_l12>;
|
||
|
|
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||
|
|
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||
|
|
|
||
|
|
cd-gpios = <&msmgpio 38 0x1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
usb@78d9000 {
|
||
|
|
extcon = <&usb_id>;
|
||
|
|
status = "okay";
|
||
|
|
adp-disable;
|
||
|
|
hnp-disable;
|
||
|
|
srp-disable;
|
||
|
|
dr_mode = "host";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&usb_sw_sel_pm>;
|
||
|
|
ulpi {
|
||
|
|
phy {
|
||
|
|
v1p8-supply = <&pm8916_l7>;
|
||
|
|
v3p3-supply = <&pm8916_l13>;
|
||
|
|
extcon = <&usb_id>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lpass@7708000 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
mdss@1a00000 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
mdp@1a01000 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
dsi@1a98000 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vdda-supply = <&pm8916_l2>;
|
||
|
|
vddio-supply = <&pm8916_l6>;
|
||
|
|
|
||
|
|
ports {
|
||
|
|
port@1 {
|
||
|
|
endpoint {
|
||
|
|
remote-endpoint = <&adv7533_in>;
|
||
|
|
data-lanes = <0 1 2 3>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
dsi-phy@1a98300 {
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
vddio-supply = <&pm8916_l6>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
lpass_codec: codec{
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
Internal Codec
|
||
|
|
playback - Primary MI2S
|
||
|
|
capture - Ter MI2S
|
||
|
|
|
||
|
|
External Primary:
|
||
|
|
playback - secondary MI2S
|
||
|
|
capture - Quat MI2S
|
||
|
|
|
||
|
|
External Secondary:
|
||
|
|
playback - Quat MI2S
|
||
|
|
capture - Quat MI2S
|
||
|
|
|
||
|
|
*/
|
||
|
|
|
||
|
|
sound: sound {
|
||
|
|
compatible = "qcom,apq8016-sbc-sndcard";
|
||
|
|
reg = <0x07702000 0x4>, <0x07702004 0x4>;
|
||
|
|
reg-names = "mic-iomux", "spkr-iomux";
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-0 = <&cdc_pdm_lines_act &ext_sec_tlmm_lines_act &ext_mclk_tlmm_lines_act>;
|
||
|
|
pinctrl-1 = <&cdc_pdm_lines_sus &ext_sec_tlmm_lines_sus &ext_mclk_tlmm_lines_sus>;
|
||
|
|
pinctrl-names = "default", "sleep";
|
||
|
|
qcom,model = "DB410c";
|
||
|
|
qcom,audio-routing =
|
||
|
|
"AMIC2", "MIC BIAS Internal2",
|
||
|
|
"AMIC3", "MIC BIAS External1";
|
||
|
|
external-dai-link@0 {
|
||
|
|
link-name = "ADV7533";
|
||
|
|
cpu { /* QUAT */
|
||
|
|
sound-dai = <&lpass MI2S_QUATERNARY>;
|
||
|
|
};
|
||
|
|
codec {
|
||
|
|
sound-dai = <&adv_bridge 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
internal-codec-playback-dai-link@0 { /* I2S - Internal codec */
|
||
|
|
link-name = "WCD";
|
||
|
|
cpu { /* PRIMARY */
|
||
|
|
sound-dai = <&lpass MI2S_PRIMARY>;
|
||
|
|
};
|
||
|
|
codec {
|
||
|
|
sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
internal-codec-capture-dai-link@0 { /* I2S - Internal codec */
|
||
|
|
link-name = "WCD-Capture";
|
||
|
|
cpu { /* PRIMARY */
|
||
|
|
sound-dai = <&lpass MI2S_TERTIARY>;
|
||
|
|
};
|
||
|
|
codec {
|
||
|
|
sound-dai = <&lpass_codec 1>, <&wcd_codec 1>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
spmi@200f000 {
|
||
|
|
pm8916@0 {
|
||
|
|
gpios@c000 {
|
||
|
|
gpio-line-names =
|
||
|
|
"USR_LED_3_CTRL",
|
||
|
|
"USR_LED_4_CTRL",
|
||
|
|
"USB_HUB_RESET_N_PM",
|
||
|
|
"USB_SW_SEL_PM";
|
||
|
|
};
|
||
|
|
mpps@a000 {
|
||
|
|
gpio-line-names =
|
||
|
|
"VDD_PX_BIAS",
|
||
|
|
"WLAN_LED_CTRL",
|
||
|
|
"BT_LED_CTRL",
|
||
|
|
"GPIO-F"; /* LS_EXP_GPIO_F, LSEC pin 28 */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
wcnss@a21b000 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
usb2513 {
|
||
|
|
compatible = "smsc,usb3503";
|
||
|
|
reset-gpios = <&pm8916_gpios 3 GPIO_ACTIVE_LOW>;
|
||
|
|
initial-mode = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
usb_id: usb-id {
|
||
|
|
compatible = "linux,extcon-usb-gpio";
|
||
|
|
vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&usb_id_default>;
|
||
|
|
};
|
||
|
|
|
||
|
|
hdmi-out {
|
||
|
|
compatible = "hdmi-connector";
|
||
|
|
type = "a";
|
||
|
|
|
||
|
|
port {
|
||
|
|
hdmi_con: endpoint {
|
||
|
|
remote-endpoint = <&adv7533_out>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio_keys {
|
||
|
|
compatible = "gpio-keys";
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
autorepeat;
|
||
|
|
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&msm_key_volp_n_default>;
|
||
|
|
|
||
|
|
button@0 {
|
||
|
|
label = "Volume Up";
|
||
|
|
linux,code = <KEY_VOLUMEUP>;
|
||
|
|
gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&wcd_codec {
|
||
|
|
status = "okay";
|
||
|
|
clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
|
||
|
|
clock-names = "mclk";
|
||
|
|
qcom,mbhc-vthreshold-low = <75 150 237 450 500>;
|
||
|
|
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&smd_rpm_regulators {
|
||
|
|
vdd_l1_l2_l3-supply = <&pm8916_s3>;
|
||
|
|
vdd_l5-supply = <&pm8916_s3>;
|
||
|
|
vdd_l4_l5_l6-supply = <&pm8916_s4>;
|
||
|
|
vdd_l7-supply = <&pm8916_s4>;
|
||
|
|
|
||
|
|
s1 {
|
||
|
|
regulator-min-microvolt = <375000>;
|
||
|
|
regulator-max-microvolt = <1562000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
s3 {
|
||
|
|
regulator-min-microvolt = <375000>;
|
||
|
|
regulator-max-microvolt = <1562000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
s4 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
l1 {
|
||
|
|
regulator-min-microvolt = <375000>;
|
||
|
|
regulator-max-microvolt = <1525000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l2 {
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l3 {
|
||
|
|
regulator-min-microvolt = <375000>;
|
||
|
|
regulator-max-microvolt = <1525000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l4 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l5 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l6 {
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l7 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l8 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l9 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l10 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l11 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
regulator-allow-set-load;
|
||
|
|
regulator-system-load = <200000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l12 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l13 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l14 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* 1.8v required on LS expansion
|
||
|
|
* for mezzanine boards
|
||
|
|
*/
|
||
|
|
l15 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
l16 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l17 {
|
||
|
|
regulator-min-microvolt = <3300000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
l18 {
|
||
|
|
regulator-min-microvolt = <1750000>;
|
||
|
|
regulator-max-microvolt = <3337000>;
|
||
|
|
};
|
||
|
|
};
|