kernel_samsung_a34x-permissive/drivers/media/platform/omap3isp/omap3isp.h

139 lines
3.6 KiB
C
Raw Permalink Normal View History

/*
* omap3isp.h
*
* TI OMAP3 ISP - Bus Configuration
*
* Copyright (C) 2011 Nokia Corporation
*
* Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
* Sakari Ailus <sakari.ailus@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#ifndef __OMAP3ISP_H__
#define __OMAP3ISP_H__
enum isp_interface_type {
ISP_INTERFACE_PARALLEL,
ISP_INTERFACE_CSI2A_PHY2,
ISP_INTERFACE_CCP2B_PHY1,
ISP_INTERFACE_CCP2B_PHY2,
ISP_INTERFACE_CSI2C_PHY1,
};
/**
* struct isp_parallel_cfg - Parallel interface configuration
* @data_lane_shift: Data lane shifter
* 0 - CAMEXT[13:0] -> CAM[13:0]
* 2 - CAMEXT[13:2] -> CAM[11:0]
* 4 - CAMEXT[13:4] -> CAM[9:0]
* 6 - CAMEXT[13:6] -> CAM[7:0]
* @clk_pol: Pixel clock polarity
* 0 - Sample on rising edge, 1 - Sample on falling edge
* @hs_pol: Horizontal synchronization polarity
* 0 - Active high, 1 - Active low
* @vs_pol: Vertical synchronization polarity
* 0 - Active high, 1 - Active low
* @fld_pol: Field signal polarity
* 0 - Positive, 1 - Negative
* @data_pol: Data polarity
* 0 - Normal, 1 - One's complement
* @bt656: Data contain BT.656 embedded synchronization
*/
struct isp_parallel_cfg {
unsigned int data_lane_shift:3;
unsigned int clk_pol:1;
unsigned int hs_pol:1;
unsigned int vs_pol:1;
unsigned int fld_pol:1;
unsigned int data_pol:1;
unsigned int bt656:1;
};
enum {
ISP_CCP2_PHY_DATA_CLOCK = 0,
ISP_CCP2_PHY_DATA_STROBE = 1,
};
enum {
ISP_CCP2_MODE_MIPI = 0,
ISP_CCP2_MODE_CCP2 = 1,
};
/**
* struct isp_csiphy_lane: CCP2/CSI2 lane position and polarity
* @pos: position of the lane
* @pol: polarity of the lane
*/
struct isp_csiphy_lane {
u8 pos;
u8 pol;
};
#define ISP_CSIPHY1_NUM_DATA_LANES 1
#define ISP_CSIPHY2_NUM_DATA_LANES 2
/**
* struct isp_csiphy_lanes_cfg - CCP2/CSI2 lane configuration
* @data: Configuration of one or two data lanes
* @clk: Clock lane configuration
*/
struct isp_csiphy_lanes_cfg {
struct isp_csiphy_lane data[ISP_CSIPHY2_NUM_DATA_LANES];
struct isp_csiphy_lane clk;
};
/**
* struct isp_ccp2_cfg - CCP2 interface configuration
* @strobe_clk_pol: Strobe/clock polarity
* 0 - Non Inverted, 1 - Inverted
* @crc: Enable the cyclic redundancy check
* @ccp2_mode: Enable CCP2 compatibility mode
* ISP_CCP2_MODE_MIPI - MIPI-CSI1 mode
* ISP_CCP2_MODE_CCP2 - CCP2 mode
* @phy_layer: Physical layer selection
* ISP_CCP2_PHY_DATA_CLOCK - Data/clock physical layer
* ISP_CCP2_PHY_DATA_STROBE - Data/strobe physical layer
* @vpclk_div: Video port output clock control
*/
struct isp_ccp2_cfg {
unsigned int strobe_clk_pol:1;
unsigned int crc:1;
unsigned int ccp2_mode:1;
unsigned int phy_layer:1;
unsigned int vpclk_div:2;
unsigned int vp_clk_pol:1;
struct isp_csiphy_lanes_cfg lanecfg;
};
/**
* struct isp_csi2_cfg - CSI2 interface configuration
* @crc: Enable the cyclic redundancy check
* @lanecfg: CSI-2 lane configuration
* @num_data_lanes: The number of data lanes in use
*/
struct isp_csi2_cfg {
unsigned crc:1;
struct isp_csiphy_lanes_cfg lanecfg;
u8 num_data_lanes;
};
struct isp_bus_cfg {
enum isp_interface_type interface;
union {
struct isp_parallel_cfg parallel;
struct isp_ccp2_cfg ccp2;
struct isp_csi2_cfg csi2;
} bus; /* gcc < 4.6.0 chokes on anonymous union initializers */
};
#endif /* __OMAP3ISP_H__ */