kernel_samsung_a34x-permissive/drivers/pinctrl/samsung/pinctrl-exynos.h

142 lines
4.1 KiB
C
Raw Permalink Normal View History

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Exynos specific definitions for Samsung pinctrl and gpiolib driver.
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2012 Linaro Ltd
* http://www.linaro.org
*
* This file contains the Exynos specific definitions for the Samsung
* pinctrl/gpiolib interface drivers.
*
* Author: Thomas Abraham <thomas.ab@samsung.com>
*/
#ifndef __PINCTRL_SAMSUNG_EXYNOS_H
#define __PINCTRL_SAMSUNG_EXYNOS_H
/* External GPIO and wakeup interrupt related definitions */
#define EXYNOS_GPIO_ECON_OFFSET 0x700
#define EXYNOS_GPIO_EFLTCON_OFFSET 0x800
#define EXYNOS_GPIO_EMASK_OFFSET 0x900
#define EXYNOS_GPIO_EPEND_OFFSET 0xA00
#define EXYNOS_WKUP_ECON_OFFSET 0xE00
#define EXYNOS_WKUP_EMASK_OFFSET 0xF00
#define EXYNOS_WKUP_EPEND_OFFSET 0xF40
#define EXYNOS7_WKUP_ECON_OFFSET 0x700
#define EXYNOS7_WKUP_EMASK_OFFSET 0x900
#define EXYNOS7_WKUP_EPEND_OFFSET 0xA00
#define EXYNOS_SVC_OFFSET 0xB08
/* helpers to access interrupt service register */
#define EXYNOS_SVC_GROUP_SHIFT 3
#define EXYNOS_SVC_GROUP_MASK 0x1f
#define EXYNOS_SVC_NUM_MASK 7
#define EXYNOS_SVC_GROUP(x) ((x >> EXYNOS_SVC_GROUP_SHIFT) & \
EXYNOS_SVC_GROUP_MASK)
/* Exynos specific external interrupt trigger types */
#define EXYNOS_EINT_LEVEL_LOW 0
#define EXYNOS_EINT_LEVEL_HIGH 1
#define EXYNOS_EINT_EDGE_FALLING 2
#define EXYNOS_EINT_EDGE_RISING 3
#define EXYNOS_EINT_EDGE_BOTH 4
#define EXYNOS_EINT_CON_MASK 0xF
#define EXYNOS_EINT_CON_LEN 4
#define EXYNOS_EINT_MAX_PER_BANK 8
#define EXYNOS_EINT_NR_WKUP_EINT
#define EXYNOS_PIN_BANK_EINTN(pins, reg, id) \
{ \
.type = &bank_type_off, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_NONE, \
.name = id \
}
#define EXYNOS_PIN_BANK_EINTG(pins, reg, id, offs) \
{ \
.type = &bank_type_off, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_GPIO, \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS_PIN_BANK_EINTW(pins, reg, id, offs) \
{ \
.type = &bank_type_alive, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_WKUP, \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS5433_PIN_BANK_EINTG(pins, reg, id, offs) \
{ \
.type = &exynos5433_bank_type_off, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_GPIO, \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS5433_PIN_BANK_EINTW(pins, reg, id, offs) \
{ \
.type = &exynos5433_bank_type_alive, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_WKUP, \
.eint_offset = offs, \
.name = id \
}
#define EXYNOS5433_PIN_BANK_EINTW_EXT(pins, reg, id, offs, pctl_idx) \
{ \
.type = &exynos5433_bank_type_off, \
.pctl_offset = reg, \
.nr_pins = pins, \
.eint_type = EINT_TYPE_WKUP, \
.eint_offset = offs, \
.name = id, \
.pctl_res_idx = pctl_idx, \
} \
/**
* struct exynos_weint_data: irq specific data for all the wakeup interrupts
* generated by the external wakeup interrupt controller.
* @irq: interrupt number within the domain.
* @bank: bank responsible for this interrupt
*/
struct exynos_weint_data {
unsigned int irq;
struct samsung_pin_bank *bank;
};
/**
* struct exynos_muxed_weint_data: irq specific data for muxed wakeup interrupts
* generated by the external wakeup interrupt controller.
* @nr_banks: count of banks being part of the mux
* @banks: array of banks being part of the mux
*/
struct exynos_muxed_weint_data {
unsigned int nr_banks;
struct samsung_pin_bank *banks[];
};
int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d);
int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d);
void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata);
void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata);
struct samsung_retention_ctrl *
exynos_retention_init(struct samsung_pinctrl_drv_data *drvdata,
const struct samsung_retention_data *data);
#endif /* __PINCTRL_SAMSUNG_EXYNOS_H */