kernel_samsung_a34x-permissive/include/uapi/linux/rpmb.h

154 lines
5 KiB
C
Raw Permalink Normal View History

/*
* Copyright (C) 2015-2016, Intel Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation;
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _UAPI_LINUX_RPMB_H_
#define _UAPI_LINUX_RPMB_H_
#include <linux/types.h>
/**
* struct rpmb_frame - rpmb frame as defined by specs
*
* @stuff : stuff bytes
* @key_mac : The authentication key or the message authentication
* code (MAC) depending on the request/response type.
* The MAC will be delivered in the last (or the only)
* block of data.
* @data : Data to be written or read by signed access.
* @nonce : Random number generated by the host for the requests
* and copied to the response by the RPMB engine.
* @write_counter: Counter value for the total amount of the successful
* authenticated data write requests made by the host.
* @addr : Address of the data to be programmed to or read
* from the RPMB. Address is the serial number of
* the accessed block (half sector 256B).
* @block_count : Number of blocks (half sectors, 256B) requested to be
* read/programmed.
* @result : Includes information about the status of the write counter
* (valid, expired) and result of the access made to the RPMB.
* @req_resp : Defines the type of request and response to/from the memory.
*/
struct rpmb_frame {
__u8 stuff[196];
__u8 key_mac[32];
__u8 data[256];
__u8 nonce[16];
__be32 write_counter;
__be16 addr;
__be16 block_count;
__be16 result;
__be16 req_resp;
} __attribute__((packed));
#define RPMB_PROGRAM_KEY 0x1 /* Program RPMB Authentication Key */
#define RPMB_GET_WRITE_COUNTER 0x2 /* Read RPMB write counter */
#define RPMB_WRITE_DATA 0x3 /* Write data to RPMB partition */
#define RPMB_READ_DATA 0x4 /* Read data from RPMB partition */
#define RPMB_RESULT_READ 0x5 /* Read result request (Internal) */
#define RPMB_REQ2RESP(_OP) ((_OP) << 8)
#define RPMB_RESP2REQ(_OP) ((_OP) >> 8)
/* length of the part of the frame used for HMAC computation */
#define hmac_data_len \
(sizeof(struct rpmb_frame) - offsetof(struct rpmb_frame, data))
/**
* enum rpmb_op_result - rpmb operation results
*
* @RPMB_ERR_OK: operation successful
* @RPMB_ERR_GENERAL: general failure
* @RPMB_ERR_AUTH: mac doesn't match or ac calculation failure
* @RPMB_ERR_COUNTER: counter doesn't match or counter increment failure
* @RPMB_ERR_ADDRESS: address out of range or wrong address alignment
* @RPMB_ERR_WRITE: data, counter, or result write failure
* @RPMB_ERR_READ: data, counter, or result read failure
* @RPMB_ERR_NO_KEY: authentication key not yet programmed
*
* @RPMB_ERR_COUNTER_EXPIRED: counter expired
*/
enum rpmb_op_result {
RPMB_ERR_OK = 0x0000,
RPMB_ERR_GENERAL = 0x0001,
RPMB_ERR_AUTH = 0x0002,
RPMB_ERR_COUNTER = 0x0003,
RPMB_ERR_ADDRESS = 0x0004,
RPMB_ERR_WRITE = 0x0005,
RPMB_ERR_READ = 0x0006,
RPMB_ERR_NO_KEY = 0x0007,
RPMB_ERR_COUNTER_EXPIRED = 0x0080
};
#define RPMB_F_WRITE (1UL << 0)
#define RPMB_F_REL_WRITE (1UL << 1)
/**
* struct rpmb_cmd - rpmb access command
*
* @flags: command flags
* 0 - read command
* 1 - write commnad RPMB_F_WRITE
* 2 - reliable write RPMB_F_REL_WRITE
* @nframes: number of rpmb frames in the command
* @frames_ptr: a pointer to the list of rpmb frames
*/
struct rpmb_ioc_cmd {
__u32 flags;
__u32 nframes;
__aligned_u64 frames_ptr;
};
#define rpmb_ioc_cmd_set_frames(_cmd, _ptr) \
(_cmd).frames_ptr = (__aligned_u64)(intptr_t)(_ptr)
#define rpmb_ioc_cmd_set(_cmd, _flags, _ptr, _n) do { \
struct rpmb_ioc_cmd *icmd = &(_cmd); \
icmd->flags = (_flags); \
icmd->nframes = (_n); \
icmd->frames_ptr = (__aligned_u64)(intptr_t)(_ptr); \
} while (0)
/**
* struct rpmb_ioc_req_cmd - rpmb operation request command
*
* @req_type: request type: must match the in frame req_resp
* program key
* get write counter
* write data
* read data
* @icmd: input command
* @ocmd: output/result command
*/
struct rpmb_ioc_req_cmd {
__u64 req_type;
struct rpmb_ioc_cmd icmd;
struct rpmb_ioc_cmd ocmd;
};
/**
* struct rpmb_ioc_seq_cmd - rpmb command sequence
*
* @num_of_cmds: number of commands
* @cmds: list of rpmb commands
*/
struct rpmb_ioc_seq_cmd {
__u64 num_of_cmds;
struct rpmb_ioc_cmd cmds[0];
};
#define RPMB_IOC_REQ_CMD _IOWR(0xB5, 0, struct rpmb_ioc_req_cmd)
#define RPMB_IOC_SEQ_CMD _IOWR(0xB5, 1, struct rpmb_ioc_seq_cmd)
#endif /* _UAPI_LINUX_RPMB_H_ */