596 lines
14 KiB
Plaintext
596 lines
14 KiB
Plaintext
|
/*
|
||
|
|
* pdu001.dts
|
||
|
|
*
|
||
|
|
* EETS GmbH PDU001 board device tree file
|
||
|
|
*
|
||
|
|
* Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
|
||
|
|
*
|
||
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
||
|
|
*
|
||
|
|
* SPDX-License-Identifier: GPL-2.0+
|
||
|
|
*/
|
||
|
|
|
||
|
|
/dts-v1/;
|
||
|
|
|
||
|
|
#include "am33xx.dtsi"
|
||
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
#include <dt-bindings/leds/leds-pca9532.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
model = "EETS,PDU001";
|
||
|
|
compatible = "ti,am33xx";
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
stdout-path = &uart3;
|
||
|
|
};
|
||
|
|
|
||
|
|
cpus {
|
||
|
|
cpu@0 {
|
||
|
|
cpu0-supply = <&vdd1_reg>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
memory {
|
||
|
|
device_type = "memory";
|
||
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||
|
|
};
|
||
|
|
|
||
|
|
vbat: fixedregulator@0 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "vbat";
|
||
|
|
regulator-min-microvolt = <3600000>;
|
||
|
|
regulator-max-microvolt = <3600000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
lis3_reg: fixedregulator@1 {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "lis3_reg";
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
panel {
|
||
|
|
compatible = "ti,tilcdc,panel";
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&lcd_pins_s0>;
|
||
|
|
panel-info {
|
||
|
|
ac-bias = <255>;
|
||
|
|
ac-bias-intrpt = <0>;
|
||
|
|
dma-burst-sz = <16>;
|
||
|
|
bpp = <16>;
|
||
|
|
fdd = <0x80>;
|
||
|
|
sync-edge = <0>;
|
||
|
|
sync-ctrl = <1>;
|
||
|
|
raster-order = <0>;
|
||
|
|
fifo-th = <0>;
|
||
|
|
};
|
||
|
|
|
||
|
|
display-timings {
|
||
|
|
240x320p16 {
|
||
|
|
clock-frequency = <6500000>;
|
||
|
|
hactive = <240>;
|
||
|
|
vactive = <320>;
|
||
|
|
hfront-porch = <6>;
|
||
|
|
hback-porch = <6>;
|
||
|
|
hsync-len = <1>;
|
||
|
|
vback-porch = <6>;
|
||
|
|
vfront-porch = <6>;
|
||
|
|
vsync-len = <1>;
|
||
|
|
hsync-active = <0>;
|
||
|
|
vsync-active = <0>;
|
||
|
|
pixelclk-active = <1>;
|
||
|
|
de-active = <0>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&am33xx_pinmux {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&clkout2_pin>;
|
||
|
|
|
||
|
|
i2c0_pins: pinmux_i2c0_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
||
|
|
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c1_pins: pinmux_i2c1_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
|
||
|
|
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
i2c2_pins: pinmux_i2c2_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */
|
||
|
|
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
spi1_pins: pinmux_spi1_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
|
||
|
|
AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
|
||
|
|
AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
|
||
|
|
AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart0_pins: pinmux_uart0_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
|
||
|
|
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
||
|
|
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart1_pins: pinmux_uart1_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
|
||
|
|
AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
uart3_pins: pinmux_uart3_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */
|
||
|
|
AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
clkout2_pin: pinmux_clkout2_pin {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
cpsw_default: cpsw_default {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
/* Port 1 (emac0) */
|
||
|
|
AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */
|
||
|
|
AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */
|
||
|
|
AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */
|
||
|
|
AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */
|
||
|
|
AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
|
||
|
|
AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
|
||
|
|
AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
|
||
|
|
AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
|
||
|
|
AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
|
||
|
|
AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */
|
||
|
|
AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
|
||
|
|
AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
|
||
|
|
AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
|
||
|
|
AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
|
||
|
|
AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
|
||
|
|
|
||
|
|
/* Port 2 (emac1) */
|
||
|
|
AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */
|
||
|
|
AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */
|
||
|
|
AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */
|
||
|
|
AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */
|
||
|
|
AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */
|
||
|
|
AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */
|
||
|
|
AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */
|
||
|
|
AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */
|
||
|
|
AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */
|
||
|
|
AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */
|
||
|
|
AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */
|
||
|
|
AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */
|
||
|
|
AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */
|
||
|
|
AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */
|
||
|
|
AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
davinci_mdio_default: davinci_mdio_default {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||
|
|
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc1_pins: pinmux_mmc1_pins {
|
||
|
|
/* eMMC */
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
|
||
|
|
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
|
||
|
|
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
|
||
|
|
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
|
||
|
|
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
|
||
|
|
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
mmc2_pins: pinmux_mmc2_pins {
|
||
|
|
/* SD cardcage */
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
|
||
|
|
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
|
||
|
|
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
|
||
|
|
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
|
||
|
|
AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
|
||
|
|
AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
|
||
|
|
/* card change signal for frontpanel SD cardcage */
|
||
|
|
AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
lcd_pins_s0: lcd_pins_s0 {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
|
||
|
|
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
|
||
|
|
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
|
||
|
|
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
|
||
|
|
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
|
||
|
|
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
|
||
|
|
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
|
||
|
|
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
|
||
|
|
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
|
||
|
|
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
|
||
|
|
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
|
||
|
|
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
|
||
|
|
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
|
||
|
|
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
|
||
|
|
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
|
||
|
|
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
|
||
|
|
AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
|
||
|
|
AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
|
||
|
|
AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
|
||
|
|
AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
dcan0_pins: pinmux_dcan0_pins {
|
||
|
|
pinctrl-single,pins = <
|
||
|
|
AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
|
||
|
|
AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart0 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart0_pins>;
|
||
|
|
|
||
|
|
rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
|
||
|
|
rs485-rts-active-high;
|
||
|
|
rs485-rts-delay = <0 0>;
|
||
|
|
linux,rs485-enabled-at-boot-time;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart1_pins>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&uart3_pins>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c0 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c0_pins>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <400000>;
|
||
|
|
|
||
|
|
tps: tps@2d {
|
||
|
|
reg = <0x2d>;
|
||
|
|
};
|
||
|
|
|
||
|
|
m2_eeprom: m2_eeprom@50 {
|
||
|
|
compatible = "atmel,24c256";
|
||
|
|
reg = <0x50>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c1_pins>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
|
||
|
|
board_24aa025e48: board_24aa025e48@50 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x50>;
|
||
|
|
};
|
||
|
|
|
||
|
|
backplane_24aa025e48: backplane_24aa025e48@53 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x53>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pca9532: pca9532@60 {
|
||
|
|
compatible = "nxp,pca9532";
|
||
|
|
reg = <0x60>;
|
||
|
|
psc0 = <0x97>;
|
||
|
|
pwm0 = <0x80>;
|
||
|
|
psc1 = <0x97>;
|
||
|
|
pwm1 = <0x10>;
|
||
|
|
|
||
|
|
run.red@0 {
|
||
|
|
type = <PCA9532_TYPE_LED>;
|
||
|
|
};
|
||
|
|
run.green@1 {
|
||
|
|
type = <PCA9532_TYPE_LED>;
|
||
|
|
default-state = "on";
|
||
|
|
};
|
||
|
|
s2.red@2 {
|
||
|
|
type = <PCA9532_TYPE_LED>;
|
||
|
|
};
|
||
|
|
s2.green@3 {
|
||
|
|
type = <PCA9532_TYPE_LED>;
|
||
|
|
};
|
||
|
|
s1.yellow@4 {
|
||
|
|
type = <PCA9532_TYPE_LED>;
|
||
|
|
};
|
||
|
|
s1.green@5 {
|
||
|
|
type = <PCA9532_TYPE_LED>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
pca9530: pca9530@61 {
|
||
|
|
compatible = "nxp,pca9530";
|
||
|
|
reg = <0x61>;
|
||
|
|
|
||
|
|
tft-panel@0 {
|
||
|
|
type = <PCA9532_TYPE_LED>;
|
||
|
|
linux,default-trigger = "backlight";
|
||
|
|
default-state = "on";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
mcp79400: mcp79400@6f {
|
||
|
|
compatible = "microchip,mcp7940x";
|
||
|
|
reg = <0x6f>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&i2c2_pins>;
|
||
|
|
|
||
|
|
status = "okay";
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&spi1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&spi1_pins>;
|
||
|
|
ti,pindir-d0-out-d1-in;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
display-controller@0 {
|
||
|
|
compatible = "orisetech,otm3225a";
|
||
|
|
reg = <0>;
|
||
|
|
spi-max-frequency = <1000000>;
|
||
|
|
// SPI mode 3
|
||
|
|
spi-cpol;
|
||
|
|
spi-cpha;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb_ctrl_mod {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb0_phy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb1_phy {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb0 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usb1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cppi41dma {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Disable soc's rtc as we have no VBAT for it. This makes the board
|
||
|
|
* rtc (Microchip MCP79400) the default rtc device 'rtc0'.
|
||
|
|
*/
|
||
|
|
&rtc {
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&lcdc {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&elm {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
#include "tps65910.dtsi"
|
||
|
|
|
||
|
|
&tps {
|
||
|
|
vcc1-supply = <&vbat>;
|
||
|
|
vcc2-supply = <&vbat>;
|
||
|
|
vcc3-supply = <&vbat>;
|
||
|
|
vcc4-supply = <&vbat>;
|
||
|
|
vcc5-supply = <&vbat>;
|
||
|
|
vcc6-supply = <&vbat>;
|
||
|
|
vcc7-supply = <&vbat>;
|
||
|
|
vccio-supply = <&vbat>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
vrtc_reg: regulator@0 {
|
||
|
|
regulator-name = "ldo_vrtc";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vio_reg: regulator@1 {
|
||
|
|
regulator-name = "buck_vdd_ddr";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd1_reg: regulator@2 {
|
||
|
|
/* VDD_MPU voltage limits */
|
||
|
|
regulator-name = "buck_vdd_mpu";
|
||
|
|
regulator-min-microvolt = <912500>;
|
||
|
|
regulator-max-microvolt = <1312500>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd2_reg: regulator@3 {
|
||
|
|
/* VDD_CORE voltage limits */
|
||
|
|
regulator-name = "buck_vdd_core";
|
||
|
|
regulator-min-microvolt = <912500>;
|
||
|
|
regulator-max-microvolt = <1150000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd3_reg: regulator@4 {
|
||
|
|
regulator-name = "boost_res";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdig1_reg: regulator@5 {
|
||
|
|
regulator-name = "ldo_vdig1";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdig2_reg: regulator@6 {
|
||
|
|
regulator-name = "ldo_vdig2";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vpll_reg: regulator@7 {
|
||
|
|
regulator-name = "ldo_vpll";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vdac_reg: regulator@8 {
|
||
|
|
regulator-name = "ldo_vdac";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vaux1_reg: regulator@9 {
|
||
|
|
regulator-name = "ldo_vaux1";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vaux2_reg: regulator@10 {
|
||
|
|
regulator-name = "ldo_vaux2";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vaux33_reg: regulator@11 {
|
||
|
|
regulator-name = "ldo_vaux33";
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vmmc_reg: regulator@12 {
|
||
|
|
regulator-name = "ldo_vmmc";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
vbb_reg: regulator@13 {
|
||
|
|
regulator-name = "bat_vbb";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mac {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&cpsw_default>;
|
||
|
|
dual_emac; /* no switch, two distinct MACs */
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&davinci_mdio {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&davinci_mdio_default>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpsw_emac0 {
|
||
|
|
phy_id = <&davinci_mdio>, <0>;
|
||
|
|
phy-mode = "mii";
|
||
|
|
dual_emac_res_vlan = <1>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&cpsw_emac1 {
|
||
|
|
phy_id = <&davinci_mdio>, <1>;
|
||
|
|
phy-mode = "mii";
|
||
|
|
dual_emac_res_vlan = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&tscadc {
|
||
|
|
status = "okay";
|
||
|
|
tsc {
|
||
|
|
ti,wires = <4>;
|
||
|
|
ti,x-plate-resistance = <200>;
|
||
|
|
ti,coordinate-readouts = <5>;
|
||
|
|
ti,wire-config = <0x01 0x10 0x22 0x33>;
|
||
|
|
ti,charge-delay = <0x400>;
|
||
|
|
};
|
||
|
|
|
||
|
|
adc {
|
||
|
|
ti,adc-channels = <4 5 6 7>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmc1 {
|
||
|
|
status = "okay";
|
||
|
|
vmmc-supply = <&vmmc_reg>;
|
||
|
|
bus-width = <4>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&mmc1_pins>;
|
||
|
|
non-removable;
|
||
|
|
};
|
||
|
|
|
||
|
|
&mmc2 {
|
||
|
|
status = "okay";
|
||
|
|
vmmc-supply = <&vmmc_reg>;
|
||
|
|
bus-width = <4>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&mmc2_pins>;
|
||
|
|
cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
|
||
|
|
};
|
||
|
|
|
||
|
|
&sham {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&aes {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&dcan0 {
|
||
|
|
status = "okay";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&dcan0_pins>;
|
||
|
|
};
|