1220 lines
29 KiB
Plaintext
1220 lines
29 KiB
Plaintext
|
/*
|
||
|
* Device Tree Source for AM4372 SoC
|
||
|
*
|
||
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||
|
*
|
||
|
* This file is licensed under the terms of the GNU General Public License
|
||
|
* version 2. This program is licensed "as is" without any warranty of any
|
||
|
* kind, whether express or implied.
|
||
|
*/
|
||
|
|
||
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||
|
#include <dt-bindings/clock/am4.h>
|
||
|
|
||
|
/ {
|
||
|
compatible = "ti,am4372", "ti,am43";
|
||
|
interrupt-parent = <&wakeupgen>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
chosen { };
|
||
|
|
||
|
memory@0 {
|
||
|
device_type = "memory";
|
||
|
reg = <0 0>;
|
||
|
};
|
||
|
|
||
|
aliases {
|
||
|
i2c0 = &i2c0;
|
||
|
i2c1 = &i2c1;
|
||
|
i2c2 = &i2c2;
|
||
|
serial0 = &uart0;
|
||
|
serial1 = &uart1;
|
||
|
serial2 = &uart2;
|
||
|
serial3 = &uart3;
|
||
|
serial4 = &uart4;
|
||
|
serial5 = &uart5;
|
||
|
ethernet0 = &cpsw_emac0;
|
||
|
ethernet1 = &cpsw_emac1;
|
||
|
spi0 = &qspi;
|
||
|
};
|
||
|
|
||
|
cpus {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
cpu: cpu@0 {
|
||
|
compatible = "arm,cortex-a9";
|
||
|
device_type = "cpu";
|
||
|
reg = <0>;
|
||
|
|
||
|
clocks = <&dpll_mpu_ck>;
|
||
|
clock-names = "cpu";
|
||
|
|
||
|
operating-points-v2 = <&cpu0_opp_table>;
|
||
|
|
||
|
clock-latency = <300000>; /* From omap-cpufreq driver */
|
||
|
};
|
||
|
};
|
||
|
|
||
|
cpu0_opp_table: opp-table {
|
||
|
compatible = "operating-points-v2-ti-cpu";
|
||
|
syscon = <&scm_conf>;
|
||
|
|
||
|
opp50-300000000 {
|
||
|
opp-hz = /bits/ 64 <300000000>;
|
||
|
opp-microvolt = <950000 931000 969000>;
|
||
|
opp-supported-hw = <0xFF 0x01>;
|
||
|
opp-suspend;
|
||
|
};
|
||
|
|
||
|
opp100-600000000 {
|
||
|
opp-hz = /bits/ 64 <600000000>;
|
||
|
opp-microvolt = <1100000 1078000 1122000>;
|
||
|
opp-supported-hw = <0xFF 0x04>;
|
||
|
};
|
||
|
|
||
|
opp120-720000000 {
|
||
|
opp-hz = /bits/ 64 <720000000>;
|
||
|
opp-microvolt = <1200000 1176000 1224000>;
|
||
|
opp-supported-hw = <0xFF 0x08>;
|
||
|
};
|
||
|
|
||
|
oppturbo-800000000 {
|
||
|
opp-hz = /bits/ 64 <800000000>;
|
||
|
opp-microvolt = <1260000 1234800 1285200>;
|
||
|
opp-supported-hw = <0xFF 0x10>;
|
||
|
};
|
||
|
|
||
|
oppnitro-1000000000 {
|
||
|
opp-hz = /bits/ 64 <1000000000>;
|
||
|
opp-microvolt = <1325000 1298500 1351500>;
|
||
|
opp-supported-hw = <0xFF 0x20>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
soc {
|
||
|
compatible = "ti,omap-infra";
|
||
|
mpu {
|
||
|
compatible = "ti,omap4-mpu";
|
||
|
ti,hwmods = "mpu";
|
||
|
pm-sram = <&pm_sram_code
|
||
|
&pm_sram_data>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
gic: interrupt-controller@48241000 {
|
||
|
compatible = "arm,cortex-a9-gic";
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <3>;
|
||
|
reg = <0x48241000 0x1000>,
|
||
|
<0x48240100 0x0100>;
|
||
|
interrupt-parent = <&gic>;
|
||
|
};
|
||
|
|
||
|
wakeupgen: interrupt-controller@48281000 {
|
||
|
compatible = "ti,omap4-wugen-mpu";
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <3>;
|
||
|
reg = <0x48281000 0x1000>;
|
||
|
interrupt-parent = <&gic>;
|
||
|
};
|
||
|
|
||
|
scu: scu@48240000 {
|
||
|
compatible = "arm,cortex-a9-scu";
|
||
|
reg = <0x48240000 0x100>;
|
||
|
};
|
||
|
|
||
|
global_timer: timer@48240200 {
|
||
|
compatible = "arm,cortex-a9-global-timer";
|
||
|
reg = <0x48240200 0x100>;
|
||
|
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
|
||
|
interrupt-parent = <&gic>;
|
||
|
clocks = <&mpu_periphclk>;
|
||
|
};
|
||
|
|
||
|
local_timer: timer@48240600 {
|
||
|
compatible = "arm,cortex-a9-twd-timer";
|
||
|
reg = <0x48240600 0x100>;
|
||
|
interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
|
||
|
interrupt-parent = <&gic>;
|
||
|
clocks = <&mpu_periphclk>;
|
||
|
};
|
||
|
|
||
|
l2-cache-controller@48242000 {
|
||
|
compatible = "arm,pl310-cache";
|
||
|
reg = <0x48242000 0x1000>;
|
||
|
cache-unified;
|
||
|
cache-level = <2>;
|
||
|
};
|
||
|
|
||
|
ocp@44000000 {
|
||
|
compatible = "ti,am4372-l3-noc", "simple-bus";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "l3_main";
|
||
|
ti,no-idle;
|
||
|
reg = <0x44000000 0x400000
|
||
|
0x44800000 0x400000>;
|
||
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
||
|
l4_wkup: l4_wkup@44c00000 {
|
||
|
compatible = "ti,am4-l4-wkup", "simple-bus";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges = <0 0x44c00000 0x287000>;
|
||
|
|
||
|
wkup_m3: wkup_m3@100000 {
|
||
|
compatible = "ti,am4372-wkup-m3";
|
||
|
reg = <0x100000 0x4000>,
|
||
|
<0x180000 0x2000>;
|
||
|
reg-names = "umem", "dmem";
|
||
|
ti,hwmods = "wkup_m3";
|
||
|
ti,pm-firmware = "am335x-pm-firmware.elf";
|
||
|
};
|
||
|
|
||
|
prcm: prcm@1f0000 {
|
||
|
compatible = "ti,am4-prcm", "simple-bus";
|
||
|
reg = <0x1f0000 0x11000>;
|
||
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges = <0 0x1f0000 0x11000>;
|
||
|
|
||
|
prcm_clocks: clocks {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
};
|
||
|
|
||
|
prcm_clockdomains: clockdomains {
|
||
|
};
|
||
|
};
|
||
|
|
||
|
scm: scm@210000 {
|
||
|
compatible = "ti,am4-scm", "simple-bus";
|
||
|
reg = <0x210000 0x4000>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges = <0 0x210000 0x4000>;
|
||
|
|
||
|
am43xx_pinmux: pinmux@800 {
|
||
|
compatible = "ti,am437-padconf",
|
||
|
"pinctrl-single";
|
||
|
reg = <0x800 0x31c>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
#pinctrl-cells = <1>;
|
||
|
#interrupt-cells = <1>;
|
||
|
interrupt-controller;
|
||
|
pinctrl-single,register-width = <32>;
|
||
|
pinctrl-single,function-mask = <0xffffffff>;
|
||
|
};
|
||
|
|
||
|
scm_conf: scm_conf@0 {
|
||
|
compatible = "syscon";
|
||
|
reg = <0x0 0x800>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
|
||
|
scm_clocks: clocks {
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
wkup_m3_ipc: wkup_m3_ipc@1324 {
|
||
|
compatible = "ti,am4372-wkup-m3-ipc";
|
||
|
reg = <0x1324 0x44>;
|
||
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,rproc = <&wkup_m3>;
|
||
|
mboxes = <&mailbox &mbox_wkupm3>;
|
||
|
};
|
||
|
|
||
|
edma_xbar: dma-router@f90 {
|
||
|
compatible = "ti,am335x-edma-crossbar";
|
||
|
reg = <0xf90 0x40>;
|
||
|
#dma-cells = <3>;
|
||
|
dma-requests = <64>;
|
||
|
dma-masters = <&edma>;
|
||
|
};
|
||
|
|
||
|
scm_clockdomains: clockdomains {
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
emif: emif@4c000000 {
|
||
|
compatible = "ti,emif-am4372";
|
||
|
reg = <0x4c000000 0x1000000>;
|
||
|
ti,hwmods = "emif";
|
||
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,no-idle;
|
||
|
sram = <&pm_sram_code
|
||
|
&pm_sram_data>;
|
||
|
};
|
||
|
|
||
|
edma: edma@49000000 {
|
||
|
compatible = "ti,edma3-tpcc";
|
||
|
ti,hwmods = "tpcc";
|
||
|
reg = <0x49000000 0x10000>;
|
||
|
reg-names = "edma3_cc";
|
||
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "edma3_ccint", "edma3_mperr",
|
||
|
"edma3_ccerrint";
|
||
|
dma-requests = <64>;
|
||
|
#dma-cells = <2>;
|
||
|
|
||
|
ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
|
||
|
<&edma_tptc2 0>;
|
||
|
|
||
|
ti,edma-memcpy-channels = <58 59>;
|
||
|
};
|
||
|
|
||
|
edma_tptc0: tptc@49800000 {
|
||
|
compatible = "ti,edma3-tptc";
|
||
|
ti,hwmods = "tptc0";
|
||
|
reg = <0x49800000 0x100000>;
|
||
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "edma3_tcerrint";
|
||
|
};
|
||
|
|
||
|
edma_tptc1: tptc@49900000 {
|
||
|
compatible = "ti,edma3-tptc";
|
||
|
ti,hwmods = "tptc1";
|
||
|
reg = <0x49900000 0x100000>;
|
||
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "edma3_tcerrint";
|
||
|
};
|
||
|
|
||
|
edma_tptc2: tptc@49a00000 {
|
||
|
compatible = "ti,edma3-tptc";
|
||
|
ti,hwmods = "tptc2";
|
||
|
reg = <0x49a00000 0x100000>;
|
||
|
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "edma3_tcerrint";
|
||
|
};
|
||
|
|
||
|
uart0: serial@44e09000 {
|
||
|
compatible = "ti,am4372-uart","ti,omap2-uart";
|
||
|
reg = <0x44e09000 0x2000>;
|
||
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "uart1";
|
||
|
};
|
||
|
|
||
|
uart1: serial@48022000 {
|
||
|
compatible = "ti,am4372-uart","ti,omap2-uart";
|
||
|
reg = <0x48022000 0x2000>;
|
||
|
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "uart2";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart2: serial@48024000 {
|
||
|
compatible = "ti,am4372-uart","ti,omap2-uart";
|
||
|
reg = <0x48024000 0x2000>;
|
||
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "uart3";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart3: serial@481a6000 {
|
||
|
compatible = "ti,am4372-uart","ti,omap2-uart";
|
||
|
reg = <0x481a6000 0x2000>;
|
||
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "uart4";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart4: serial@481a8000 {
|
||
|
compatible = "ti,am4372-uart","ti,omap2-uart";
|
||
|
reg = <0x481a8000 0x2000>;
|
||
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "uart5";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
uart5: serial@481aa000 {
|
||
|
compatible = "ti,am4372-uart","ti,omap2-uart";
|
||
|
reg = <0x481aa000 0x2000>;
|
||
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "uart6";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
mailbox: mailbox@480c8000 {
|
||
|
compatible = "ti,omap4-mailbox";
|
||
|
reg = <0x480C8000 0x200>;
|
||
|
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "mailbox";
|
||
|
#mbox-cells = <1>;
|
||
|
ti,mbox-num-users = <4>;
|
||
|
ti,mbox-num-fifos = <8>;
|
||
|
mbox_wkupm3: wkup_m3 {
|
||
|
ti,mbox-send-noirq;
|
||
|
ti,mbox-tx = <0 0 0>;
|
||
|
ti,mbox-rx = <0 0 3>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
timer1: timer@44e31000 {
|
||
|
compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
|
||
|
reg = <0x44e31000 0x400>;
|
||
|
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,timer-alwon;
|
||
|
ti,hwmods = "timer1";
|
||
|
clocks = <&timer1_fck>;
|
||
|
clock-names = "fck";
|
||
|
};
|
||
|
|
||
|
timer2: timer@48040000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x48040000 0x400>;
|
||
|
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "timer2";
|
||
|
clocks = <&timer2_fck>;
|
||
|
clock-names = "fck";
|
||
|
};
|
||
|
|
||
|
timer3: timer@48042000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x48042000 0x400>;
|
||
|
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "timer3";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer4: timer@48044000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x48044000 0x400>;
|
||
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,timer-pwm;
|
||
|
ti,hwmods = "timer4";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer5: timer@48046000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x48046000 0x400>;
|
||
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,timer-pwm;
|
||
|
ti,hwmods = "timer5";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer6: timer@48048000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x48048000 0x400>;
|
||
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,timer-pwm;
|
||
|
ti,hwmods = "timer6";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer7: timer@4804a000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x4804a000 0x400>;
|
||
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,timer-pwm;
|
||
|
ti,hwmods = "timer7";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer8: timer@481c1000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x481c1000 0x400>;
|
||
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "timer8";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer9: timer@4833d000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x4833d000 0x400>;
|
||
|
interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "timer9";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer10: timer@4833f000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x4833f000 0x400>;
|
||
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "timer10";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
timer11: timer@48341000 {
|
||
|
compatible = "ti,am4372-timer","ti,am335x-timer";
|
||
|
reg = <0x48341000 0x400>;
|
||
|
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "timer11";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
counter32k: counter@44e86000 {
|
||
|
compatible = "ti,am4372-counter32k","ti,omap-counter32k";
|
||
|
reg = <0x44e86000 0x40>;
|
||
|
ti,hwmods = "counter_32k";
|
||
|
};
|
||
|
|
||
|
rtc: rtc@44e3e000 {
|
||
|
compatible = "ti,am4372-rtc", "ti,am3352-rtc",
|
||
|
"ti,da830-rtc";
|
||
|
reg = <0x44e3e000 0x1000>;
|
||
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
|
||
|
GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "rtc";
|
||
|
clocks = <&clk_32768_ck>;
|
||
|
clock-names = "int-clk";
|
||
|
system-power-controller;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
wdt: wdt@44e35000 {
|
||
|
compatible = "ti,am4372-wdt","ti,omap3-wdt";
|
||
|
reg = <0x44e35000 0x1000>;
|
||
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "wd_timer2";
|
||
|
};
|
||
|
|
||
|
gpio0: gpio@44e07000 {
|
||
|
compatible = "ti,am4372-gpio","ti,omap4-gpio";
|
||
|
reg = <0x44e07000 0x1000>;
|
||
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <2>;
|
||
|
ti,hwmods = "gpio1";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
gpio1: gpio@4804c000 {
|
||
|
compatible = "ti,am4372-gpio","ti,omap4-gpio";
|
||
|
reg = <0x4804c000 0x1000>;
|
||
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <2>;
|
||
|
ti,hwmods = "gpio2";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
gpio2: gpio@481ac000 {
|
||
|
compatible = "ti,am4372-gpio","ti,omap4-gpio";
|
||
|
reg = <0x481ac000 0x1000>;
|
||
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <2>;
|
||
|
ti,hwmods = "gpio3";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
gpio3: gpio@481ae000 {
|
||
|
compatible = "ti,am4372-gpio","ti,omap4-gpio";
|
||
|
reg = <0x481ae000 0x1000>;
|
||
|
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <2>;
|
||
|
ti,hwmods = "gpio4";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
gpio4: gpio@48320000 {
|
||
|
compatible = "ti,am4372-gpio","ti,omap4-gpio";
|
||
|
reg = <0x48320000 0x1000>;
|
||
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <2>;
|
||
|
ti,hwmods = "gpio5";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
gpio5: gpio@48322000 {
|
||
|
compatible = "ti,am4372-gpio","ti,omap4-gpio";
|
||
|
reg = <0x48322000 0x1000>;
|
||
|
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <2>;
|
||
|
ti,hwmods = "gpio6";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
hwspinlock: spinlock@480ca000 {
|
||
|
compatible = "ti,omap4-hwspinlock";
|
||
|
reg = <0x480ca000 0x1000>;
|
||
|
ti,hwmods = "spinlock";
|
||
|
#hwlock-cells = <1>;
|
||
|
};
|
||
|
|
||
|
i2c0: i2c@44e0b000 {
|
||
|
compatible = "ti,am4372-i2c","ti,omap4-i2c";
|
||
|
reg = <0x44e0b000 0x1000>;
|
||
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "i2c1";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
i2c1: i2c@4802a000 {
|
||
|
compatible = "ti,am4372-i2c","ti,omap4-i2c";
|
||
|
reg = <0x4802a000 0x1000>;
|
||
|
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "i2c2";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
i2c2: i2c@4819c000 {
|
||
|
compatible = "ti,am4372-i2c","ti,omap4-i2c";
|
||
|
reg = <0x4819c000 0x1000>;
|
||
|
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "i2c3";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
spi0: spi@48030000 {
|
||
|
compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
|
||
|
reg = <0x48030000 0x400>;
|
||
|
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "spi0";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
mmc1: mmc@48060000 {
|
||
|
compatible = "ti,omap4-hsmmc";
|
||
|
reg = <0x48060000 0x1000>;
|
||
|
ti,hwmods = "mmc1";
|
||
|
ti,dual-volt;
|
||
|
ti,needs-special-reset;
|
||
|
dmas = <&edma 24 0>,
|
||
|
<&edma 25 0>;
|
||
|
dma-names = "tx", "rx";
|
||
|
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
mmc2: mmc@481d8000 {
|
||
|
compatible = "ti,omap4-hsmmc";
|
||
|
reg = <0x481d8000 0x1000>;
|
||
|
ti,hwmods = "mmc2";
|
||
|
ti,needs-special-reset;
|
||
|
dmas = <&edma 2 0>,
|
||
|
<&edma 3 0>;
|
||
|
dma-names = "tx", "rx";
|
||
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
mmc3: mmc@47810000 {
|
||
|
compatible = "ti,omap4-hsmmc";
|
||
|
reg = <0x47810000 0x1000>;
|
||
|
ti,hwmods = "mmc3";
|
||
|
ti,needs-special-reset;
|
||
|
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
spi1: spi@481a0000 {
|
||
|
compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
|
||
|
reg = <0x481a0000 0x400>;
|
||
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "spi1";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
spi2: spi@481a2000 {
|
||
|
compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
|
||
|
reg = <0x481a2000 0x400>;
|
||
|
interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "spi2";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
spi3: spi@481a4000 {
|
||
|
compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
|
||
|
reg = <0x481a4000 0x400>;
|
||
|
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "spi3";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
spi4: spi@48345000 {
|
||
|
compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
|
||
|
reg = <0x48345000 0x400>;
|
||
|
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "spi4";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
mac: ethernet@4a100000 {
|
||
|
compatible = "ti,am4372-cpsw","ti,cpsw";
|
||
|
reg = <0x4a100000 0x800
|
||
|
0x4a101200 0x100>;
|
||
|
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
|
||
|
GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
|
||
|
GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
|
||
|
GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ti,hwmods = "cpgmac0";
|
||
|
clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
|
||
|
<&dpll_clksel_mac_clk>;
|
||
|
clock-names = "fck", "cpts", "50mclk";
|
||
|
assigned-clocks = <&dpll_clksel_mac_clk>;
|
||
|
assigned-clock-rates = <50000000>;
|
||
|
status = "disabled";
|
||
|
cpdma_channels = <8>;
|
||
|
ale_entries = <1024>;
|
||
|
bd_ram_size = <0x2000>;
|
||
|
mac_control = <0x20>;
|
||
|
slaves = <2>;
|
||
|
active_slave = <0>;
|
||
|
cpts_clock_mult = <0x80000000>;
|
||
|
cpts_clock_shift = <29>;
|
||
|
ranges;
|
||
|
syscon = <&scm_conf>;
|
||
|
|
||
|
davinci_mdio: mdio@4a101000 {
|
||
|
compatible = "ti,am4372-mdio","ti,cpsw-mdio","ti,davinci_mdio";
|
||
|
reg = <0x4a101000 0x100>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
ti,hwmods = "davinci_mdio";
|
||
|
bus_freq = <1000000>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
cpsw_emac0: slave@4a100200 {
|
||
|
/* Filled in by U-Boot */
|
||
|
mac-address = [ 00 00 00 00 00 00 ];
|
||
|
};
|
||
|
|
||
|
cpsw_emac1: slave@4a100300 {
|
||
|
/* Filled in by U-Boot */
|
||
|
mac-address = [ 00 00 00 00 00 00 ];
|
||
|
};
|
||
|
|
||
|
phy_sel: cpsw-phy-sel@44e10650 {
|
||
|
compatible = "ti,am43xx-cpsw-phy-sel";
|
||
|
reg= <0x44e10650 0x4>;
|
||
|
reg-names = "gmii-sel";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
epwmss0: epwmss@48300000 {
|
||
|
compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
|
||
|
reg = <0x48300000 0x10>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "epwmss0";
|
||
|
status = "disabled";
|
||
|
|
||
|
ecap0: ecap@48300100 {
|
||
|
compatible = "ti,am4372-ecap",
|
||
|
"ti,am3352-ecap",
|
||
|
"ti,am33xx-ecap";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48300100 0x80>;
|
||
|
clocks = <&l4ls_gclk>;
|
||
|
clock-names = "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
ehrpwm0: pwm@48300200 {
|
||
|
compatible = "ti,am4372-ehrpwm",
|
||
|
"ti,am3352-ehrpwm",
|
||
|
"ti,am33xx-ehrpwm";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48300200 0x80>;
|
||
|
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
|
||
|
clock-names = "tbclk", "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
epwmss1: epwmss@48302000 {
|
||
|
compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
|
||
|
reg = <0x48302000 0x10>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "epwmss1";
|
||
|
status = "disabled";
|
||
|
|
||
|
ecap1: ecap@48302100 {
|
||
|
compatible = "ti,am4372-ecap",
|
||
|
"ti,am3352-ecap",
|
||
|
"ti,am33xx-ecap";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48302100 0x80>;
|
||
|
clocks = <&l4ls_gclk>;
|
||
|
clock-names = "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
ehrpwm1: pwm@48302200 {
|
||
|
compatible = "ti,am4372-ehrpwm",
|
||
|
"ti,am3352-ehrpwm",
|
||
|
"ti,am33xx-ehrpwm";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48302200 0x80>;
|
||
|
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
|
||
|
clock-names = "tbclk", "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
epwmss2: epwmss@48304000 {
|
||
|
compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
|
||
|
reg = <0x48304000 0x10>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "epwmss2";
|
||
|
status = "disabled";
|
||
|
|
||
|
ecap2: ecap@48304100 {
|
||
|
compatible = "ti,am4372-ecap",
|
||
|
"ti,am3352-ecap",
|
||
|
"ti,am33xx-ecap";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48304100 0x80>;
|
||
|
clocks = <&l4ls_gclk>;
|
||
|
clock-names = "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
ehrpwm2: pwm@48304200 {
|
||
|
compatible = "ti,am4372-ehrpwm",
|
||
|
"ti,am3352-ehrpwm",
|
||
|
"ti,am33xx-ehrpwm";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48304200 0x80>;
|
||
|
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
|
||
|
clock-names = "tbclk", "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
epwmss3: epwmss@48306000 {
|
||
|
compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
|
||
|
reg = <0x48306000 0x10>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "epwmss3";
|
||
|
status = "disabled";
|
||
|
|
||
|
ehrpwm3: pwm@48306200 {
|
||
|
compatible = "ti,am4372-ehrpwm",
|
||
|
"ti,am3352-ehrpwm",
|
||
|
"ti,am33xx-ehrpwm";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48306200 0x80>;
|
||
|
clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
|
||
|
clock-names = "tbclk", "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
epwmss4: epwmss@48308000 {
|
||
|
compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
|
||
|
reg = <0x48308000 0x10>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "epwmss4";
|
||
|
status = "disabled";
|
||
|
|
||
|
ehrpwm4: pwm@48308200 {
|
||
|
compatible = "ti,am4372-ehrpwm",
|
||
|
"ti,am3352-ehrpwm",
|
||
|
"ti,am33xx-ehrpwm";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x48308200 0x80>;
|
||
|
clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
|
||
|
clock-names = "tbclk", "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
epwmss5: epwmss@4830a000 {
|
||
|
compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
|
||
|
reg = <0x4830a000 0x10>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "epwmss5";
|
||
|
status = "disabled";
|
||
|
|
||
|
ehrpwm5: pwm@4830a200 {
|
||
|
compatible = "ti,am4372-ehrpwm",
|
||
|
"ti,am3352-ehrpwm",
|
||
|
"ti,am33xx-ehrpwm";
|
||
|
#pwm-cells = <3>;
|
||
|
reg = <0x4830a200 0x80>;
|
||
|
clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
|
||
|
clock-names = "tbclk", "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
tscadc: tscadc@44e0d000 {
|
||
|
compatible = "ti,am3359-tscadc";
|
||
|
reg = <0x44e0d000 0x1000>;
|
||
|
ti,hwmods = "adc_tsc";
|
||
|
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&adc_tsc_fck>;
|
||
|
clock-names = "fck";
|
||
|
status = "disabled";
|
||
|
dmas = <&edma 53 0>, <&edma 57 0>;
|
||
|
dma-names = "fifo0", "fifo1";
|
||
|
|
||
|
tsc {
|
||
|
compatible = "ti,am3359-tsc";
|
||
|
};
|
||
|
|
||
|
adc {
|
||
|
#io-channel-cells = <1>;
|
||
|
compatible = "ti,am3359-adc";
|
||
|
};
|
||
|
|
||
|
};
|
||
|
|
||
|
sham: sham@53100000 {
|
||
|
compatible = "ti,omap5-sham";
|
||
|
ti,hwmods = "sham";
|
||
|
reg = <0x53100000 0x300>;
|
||
|
dmas = <&edma 36 0>;
|
||
|
dma-names = "rx";
|
||
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
};
|
||
|
|
||
|
aes: aes@53501000 {
|
||
|
compatible = "ti,omap4-aes";
|
||
|
ti,hwmods = "aes";
|
||
|
reg = <0x53501000 0xa0>;
|
||
|
interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
dmas = <&edma 6 0>,
|
||
|
<&edma 5 0>;
|
||
|
dma-names = "tx", "rx";
|
||
|
};
|
||
|
|
||
|
des: des@53701000 {
|
||
|
compatible = "ti,omap4-des";
|
||
|
ti,hwmods = "des";
|
||
|
reg = <0x53701000 0xa0>;
|
||
|
interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
dmas = <&edma 34 0>,
|
||
|
<&edma 33 0>;
|
||
|
dma-names = "tx", "rx";
|
||
|
};
|
||
|
|
||
|
rng: rng@48310000 {
|
||
|
compatible = "ti,omap4-rng";
|
||
|
ti,hwmods = "rng";
|
||
|
reg = <0x48310000 0x2000>;
|
||
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
};
|
||
|
|
||
|
mcasp0: mcasp@48038000 {
|
||
|
compatible = "ti,am33xx-mcasp-audio";
|
||
|
ti,hwmods = "mcasp0";
|
||
|
reg = <0x48038000 0x2000>,
|
||
|
<0x46000000 0x400000>;
|
||
|
reg-names = "mpu", "dat";
|
||
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "tx", "rx";
|
||
|
status = "disabled";
|
||
|
dmas = <&edma 8 2>,
|
||
|
<&edma 9 2>;
|
||
|
dma-names = "tx", "rx";
|
||
|
};
|
||
|
|
||
|
mcasp1: mcasp@4803c000 {
|
||
|
compatible = "ti,am33xx-mcasp-audio";
|
||
|
ti,hwmods = "mcasp1";
|
||
|
reg = <0x4803C000 0x2000>,
|
||
|
<0x46400000 0x400000>;
|
||
|
reg-names = "mpu", "dat";
|
||
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "tx", "rx";
|
||
|
status = "disabled";
|
||
|
dmas = <&edma 10 2>,
|
||
|
<&edma 11 2>;
|
||
|
dma-names = "tx", "rx";
|
||
|
};
|
||
|
|
||
|
elm: elm@48080000 {
|
||
|
compatible = "ti,am3352-elm";
|
||
|
reg = <0x48080000 0x2000>;
|
||
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "elm";
|
||
|
clocks = <&l4ls_gclk>;
|
||
|
clock-names = "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
gpmc: gpmc@50000000 {
|
||
|
compatible = "ti,am3352-gpmc";
|
||
|
ti,hwmods = "gpmc";
|
||
|
dmas = <&edma 52 0>;
|
||
|
dma-names = "rxtx";
|
||
|
clocks = <&l3s_gclk>;
|
||
|
clock-names = "fck";
|
||
|
reg = <0x50000000 0x2000>;
|
||
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
gpmc,num-cs = <7>;
|
||
|
gpmc,num-waitpins = <2>;
|
||
|
#address-cells = <2>;
|
||
|
#size-cells = <1>;
|
||
|
interrupt-controller;
|
||
|
#interrupt-cells = <2>;
|
||
|
gpio-controller;
|
||
|
#gpio-cells = <2>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
ocp2scp0: ocp2scp@483a8000 {
|
||
|
compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "ocp2scp0";
|
||
|
|
||
|
usb2_phy1: phy@483a8000 {
|
||
|
compatible = "ti,am437x-usb2";
|
||
|
reg = <0x483a8000 0x8000>;
|
||
|
syscon-phy-power = <&scm_conf 0x620>;
|
||
|
clocks = <&usb_phy0_always_on_clk32k>,
|
||
|
<&l4_per_clkctrl AM4_USB_OTG_SS0_CLKCTRL 8>;
|
||
|
clock-names = "wkupclk", "refclk";
|
||
|
#phy-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
ocp2scp1: ocp2scp@483e8000 {
|
||
|
compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
ti,hwmods = "ocp2scp1";
|
||
|
|
||
|
usb2_phy2: phy@483e8000 {
|
||
|
compatible = "ti,am437x-usb2";
|
||
|
reg = <0x483e8000 0x8000>;
|
||
|
syscon-phy-power = <&scm_conf 0x628>;
|
||
|
clocks = <&usb_phy1_always_on_clk32k>,
|
||
|
<&l4_per_clkctrl AM4_USB_OTG_SS1_CLKCTRL 8>;
|
||
|
clock-names = "wkupclk", "refclk";
|
||
|
#phy-cells = <0>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
dwc3_1: omap_dwc3@48380000 {
|
||
|
compatible = "ti,am437x-dwc3";
|
||
|
ti,hwmods = "usb_otg_ss0";
|
||
|
reg = <0x48380000 0x10000>;
|
||
|
interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
utmi-mode = <1>;
|
||
|
ranges;
|
||
|
|
||
|
usb1: usb@48390000 {
|
||
|
compatible = "synopsys,dwc3";
|
||
|
reg = <0x48390000 0x10000>;
|
||
|
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "peripheral",
|
||
|
"host",
|
||
|
"otg";
|
||
|
phys = <&usb2_phy1>;
|
||
|
phy-names = "usb2-phy";
|
||
|
maximum-speed = "high-speed";
|
||
|
dr_mode = "otg";
|
||
|
status = "disabled";
|
||
|
snps,dis_u3_susphy_quirk;
|
||
|
snps,dis_u2_susphy_quirk;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
dwc3_2: omap_dwc3@483c0000 {
|
||
|
compatible = "ti,am437x-dwc3";
|
||
|
ti,hwmods = "usb_otg_ss1";
|
||
|
reg = <0x483c0000 0x10000>;
|
||
|
interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
utmi-mode = <1>;
|
||
|
ranges;
|
||
|
|
||
|
usb2: usb@483d0000 {
|
||
|
compatible = "synopsys,dwc3";
|
||
|
reg = <0x483d0000 0x10000>;
|
||
|
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
|
||
|
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
interrupt-names = "peripheral",
|
||
|
"host",
|
||
|
"otg";
|
||
|
phys = <&usb2_phy2>;
|
||
|
phy-names = "usb2-phy";
|
||
|
maximum-speed = "high-speed";
|
||
|
dr_mode = "otg";
|
||
|
status = "disabled";
|
||
|
snps,dis_u3_susphy_quirk;
|
||
|
snps,dis_u2_susphy_quirk;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
qspi: spi@47900000 {
|
||
|
compatible = "ti,am4372-qspi";
|
||
|
reg = <0x47900000 0x100>,
|
||
|
<0x30000000 0x4000000>;
|
||
|
reg-names = "qspi_base", "qspi_mmap";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
ti,hwmods = "qspi";
|
||
|
interrupts = <0 138 0x4>;
|
||
|
num-cs = <4>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
hdq: hdq@48347000 {
|
||
|
compatible = "ti,am4372-hdq";
|
||
|
reg = <0x48347000 0x1000>;
|
||
|
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
clocks = <&func_12m_clk>;
|
||
|
clock-names = "fck";
|
||
|
ti,hwmods = "hdq1w";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
dss: dss@4832a000 {
|
||
|
compatible = "ti,omap3-dss";
|
||
|
reg = <0x4832a000 0x200>;
|
||
|
status = "disabled";
|
||
|
ti,hwmods = "dss_core";
|
||
|
clocks = <&disp_clk>;
|
||
|
clock-names = "fck";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
ranges;
|
||
|
|
||
|
dispc: dispc@4832a400 {
|
||
|
compatible = "ti,omap3-dispc";
|
||
|
reg = <0x4832a400 0x400>;
|
||
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "dss_dispc";
|
||
|
clocks = <&disp_clk>;
|
||
|
clock-names = "fck";
|
||
|
|
||
|
max-memory-bandwidth = <230000000>;
|
||
|
};
|
||
|
|
||
|
rfbi: rfbi@4832a800 {
|
||
|
compatible = "ti,omap3-rfbi";
|
||
|
reg = <0x4832a800 0x100>;
|
||
|
ti,hwmods = "dss_rfbi";
|
||
|
clocks = <&disp_clk>;
|
||
|
clock-names = "fck";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
ocmcram: ocmcram@40300000 {
|
||
|
compatible = "mmio-sram";
|
||
|
reg = <0x40300000 0x40000>; /* 256k */
|
||
|
ranges = <0x0 0x40300000 0x40000>;
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
|
||
|
pm_sram_code: pm-sram-code@0 {
|
||
|
compatible = "ti,sram";
|
||
|
reg = <0x0 0x1000>;
|
||
|
protect-exec;
|
||
|
};
|
||
|
|
||
|
pm_sram_data: pm-sram-data@1000 {
|
||
|
compatible = "ti,sram";
|
||
|
reg = <0x1000 0x1000>;
|
||
|
pool;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
dcan0: can@481cc000 {
|
||
|
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
||
|
ti,hwmods = "d_can0";
|
||
|
clocks = <&dcan0_fck>;
|
||
|
clock-names = "fck";
|
||
|
reg = <0x481cc000 0x2000>;
|
||
|
syscon-raminit = <&scm_conf 0x644 0>;
|
||
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
dcan1: can@481d0000 {
|
||
|
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
||
|
ti,hwmods = "d_can1";
|
||
|
clocks = <&dcan1_fck>;
|
||
|
clock-names = "fck";
|
||
|
reg = <0x481d0000 0x2000>;
|
||
|
syscon-raminit = <&scm_conf 0x644 1>;
|
||
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
vpfe0: vpfe@48326000 {
|
||
|
compatible = "ti,am437x-vpfe";
|
||
|
reg = <0x48326000 0x2000>;
|
||
|
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "vpfe0";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
vpfe1: vpfe@48328000 {
|
||
|
compatible = "ti,am437x-vpfe";
|
||
|
reg = <0x48328000 0x2000>;
|
||
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
ti,hwmods = "vpfe1";
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
#include "am43xx-clocks.dtsi"
|