729 lines
17 KiB
C
729 lines
17 KiB
C
|
/*
|
||
|
* IIO driver for the light sensor ISL29028.
|
||
|
* ISL29028 is Concurrent Ambient Light and Proximity Sensor
|
||
|
*
|
||
|
* Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
|
||
|
* Copyright (c) 2016-2017 Brian Masney <masneyb@onstation.org>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify it
|
||
|
* under the terms and conditions of the GNU General Public License,
|
||
|
* version 2, as published by the Free Software Foundation.
|
||
|
*
|
||
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
||
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||
|
* more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
|
*
|
||
|
* Datasheets:
|
||
|
* - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29028.pdf
|
||
|
* - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29030.pdf
|
||
|
*/
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/i2c.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/mutex.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/regmap.h>
|
||
|
#include <linux/iio/iio.h>
|
||
|
#include <linux/iio/sysfs.h>
|
||
|
#include <linux/pm_runtime.h>
|
||
|
|
||
|
#define ISL29028_CONV_TIME_MS 100
|
||
|
|
||
|
#define ISL29028_REG_CONFIGURE 0x01
|
||
|
|
||
|
#define ISL29028_CONF_ALS_IR_MODE_ALS 0
|
||
|
#define ISL29028_CONF_ALS_IR_MODE_IR BIT(0)
|
||
|
#define ISL29028_CONF_ALS_IR_MODE_MASK BIT(0)
|
||
|
|
||
|
#define ISL29028_CONF_ALS_RANGE_LOW_LUX 0
|
||
|
#define ISL29028_CONF_ALS_RANGE_HIGH_LUX BIT(1)
|
||
|
#define ISL29028_CONF_ALS_RANGE_MASK BIT(1)
|
||
|
|
||
|
#define ISL29028_CONF_ALS_DIS 0
|
||
|
#define ISL29028_CONF_ALS_EN BIT(2)
|
||
|
#define ISL29028_CONF_ALS_EN_MASK BIT(2)
|
||
|
|
||
|
#define ISL29028_CONF_PROX_SLP_SH 4
|
||
|
#define ISL29028_CONF_PROX_SLP_MASK (7 << ISL29028_CONF_PROX_SLP_SH)
|
||
|
|
||
|
#define ISL29028_CONF_PROX_EN BIT(7)
|
||
|
#define ISL29028_CONF_PROX_EN_MASK BIT(7)
|
||
|
|
||
|
#define ISL29028_REG_INTERRUPT 0x02
|
||
|
|
||
|
#define ISL29028_REG_PROX_DATA 0x08
|
||
|
#define ISL29028_REG_ALSIR_L 0x09
|
||
|
#define ISL29028_REG_ALSIR_U 0x0A
|
||
|
|
||
|
#define ISL29028_REG_TEST1_MODE 0x0E
|
||
|
#define ISL29028_REG_TEST2_MODE 0x0F
|
||
|
|
||
|
#define ISL29028_NUM_REGS (ISL29028_REG_TEST2_MODE + 1)
|
||
|
|
||
|
#define ISL29028_POWER_OFF_DELAY_MS 2000
|
||
|
|
||
|
struct isl29028_prox_data {
|
||
|
int sampling_int;
|
||
|
int sampling_fract;
|
||
|
int sleep_time;
|
||
|
};
|
||
|
|
||
|
static const struct isl29028_prox_data isl29028_prox_data[] = {
|
||
|
{ 1, 250000, 800 },
|
||
|
{ 2, 500000, 400 },
|
||
|
{ 5, 0, 200 },
|
||
|
{ 10, 0, 100 },
|
||
|
{ 13, 300000, 75 },
|
||
|
{ 20, 0, 50 },
|
||
|
{ 80, 0, 13 }, /*
|
||
|
* Note: Data sheet lists 12.5 ms sleep time.
|
||
|
* Round up a half millisecond for msleep().
|
||
|
*/
|
||
|
{ 100, 0, 0 }
|
||
|
};
|
||
|
|
||
|
enum isl29028_als_ir_mode {
|
||
|
ISL29028_MODE_NONE = 0,
|
||
|
ISL29028_MODE_ALS,
|
||
|
ISL29028_MODE_IR,
|
||
|
};
|
||
|
|
||
|
struct isl29028_chip {
|
||
|
struct mutex lock;
|
||
|
struct regmap *regmap;
|
||
|
int prox_sampling_int;
|
||
|
int prox_sampling_frac;
|
||
|
bool enable_prox;
|
||
|
int lux_scale;
|
||
|
enum isl29028_als_ir_mode als_ir_mode;
|
||
|
};
|
||
|
|
||
|
static int isl29028_find_prox_sleep_index(int sampling_int, int sampling_fract)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(isl29028_prox_data); ++i) {
|
||
|
if (isl29028_prox_data[i].sampling_int == sampling_int &&
|
||
|
isl29028_prox_data[i].sampling_fract == sampling_fract)
|
||
|
return i;
|
||
|
}
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
|
||
|
int sampling_int, int sampling_fract)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int sleep_index, ret;
|
||
|
|
||
|
sleep_index = isl29028_find_prox_sleep_index(sampling_int,
|
||
|
sampling_fract);
|
||
|
if (sleep_index < 0)
|
||
|
return sleep_index;
|
||
|
|
||
|
ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_PROX_SLP_MASK,
|
||
|
sleep_index << ISL29028_CONF_PROX_SLP_SH);
|
||
|
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "%s(): Error %d setting the proximity sampling\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
chip->prox_sampling_int = sampling_int;
|
||
|
chip->prox_sampling_frac = sampling_fract;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int isl29028_enable_proximity(struct isl29028_chip *chip)
|
||
|
{
|
||
|
int prox_index, ret;
|
||
|
|
||
|
ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling_int,
|
||
|
chip->prox_sampling_frac);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_PROX_EN_MASK,
|
||
|
ISL29028_CONF_PROX_EN);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Wait for conversion to be complete for first sample */
|
||
|
prox_index = isl29028_find_prox_sleep_index(chip->prox_sampling_int,
|
||
|
chip->prox_sampling_frac);
|
||
|
if (prox_index < 0)
|
||
|
return prox_index;
|
||
|
|
||
|
msleep(isl29028_prox_data[prox_index].sleep_time);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int val = (lux_scale == 2000) ? ISL29028_CONF_ALS_RANGE_HIGH_LUX :
|
||
|
ISL29028_CONF_ALS_RANGE_LOW_LUX;
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_ALS_RANGE_MASK, val);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "%s(): Error %d setting the ALS scale\n", __func__,
|
||
|
ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
chip->lux_scale = lux_scale;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
|
||
|
enum isl29028_als_ir_mode mode)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
if (chip->als_ir_mode == mode)
|
||
|
return 0;
|
||
|
|
||
|
ret = isl29028_set_als_scale(chip, chip->lux_scale);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
switch (mode) {
|
||
|
case ISL29028_MODE_ALS:
|
||
|
ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_ALS_IR_MODE_MASK,
|
||
|
ISL29028_CONF_ALS_IR_MODE_ALS);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_ALS_RANGE_MASK,
|
||
|
ISL29028_CONF_ALS_RANGE_HIGH_LUX);
|
||
|
break;
|
||
|
case ISL29028_MODE_IR:
|
||
|
ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_ALS_IR_MODE_MASK,
|
||
|
ISL29028_CONF_ALS_IR_MODE_IR);
|
||
|
break;
|
||
|
case ISL29028_MODE_NONE:
|
||
|
return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_ALS_EN_MASK,
|
||
|
ISL29028_CONF_ALS_DIS);
|
||
|
}
|
||
|
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Enable the ALS/IR */
|
||
|
ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
|
||
|
ISL29028_CONF_ALS_EN_MASK,
|
||
|
ISL29028_CONF_ALS_EN);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* Need to wait for conversion time if ALS/IR mode enabled */
|
||
|
msleep(ISL29028_CONV_TIME_MS);
|
||
|
|
||
|
chip->als_ir_mode = mode;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
unsigned int lsb;
|
||
|
unsigned int msb;
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev,
|
||
|
"%s(): Error %d reading register ALSIR_L\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev,
|
||
|
"%s(): Error %d reading register ALSIR_U\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
*als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
unsigned int data;
|
||
|
int ret;
|
||
|
|
||
|
if (!chip->enable_prox) {
|
||
|
ret = isl29028_enable_proximity(chip);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
chip->enable_prox = true;
|
||
|
}
|
||
|
|
||
|
ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "%s(): Error %d reading register PROX_DATA\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
*prox = data;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int ret;
|
||
|
int als_ir_data;
|
||
|
|
||
|
ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_ALS);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "%s(): Error %d enabling ALS mode\n", __func__,
|
||
|
ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = isl29028_read_als_ir(chip, &als_ir_data);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/*
|
||
|
* convert als data count to lux.
|
||
|
* if lux_scale = 125, lux = count * 0.031
|
||
|
* if lux_scale = 2000, lux = count * 0.49
|
||
|
*/
|
||
|
if (chip->lux_scale == 125)
|
||
|
als_ir_data = (als_ir_data * 31) / 1000;
|
||
|
else
|
||
|
als_ir_data = (als_ir_data * 49) / 100;
|
||
|
|
||
|
*als_data = als_ir_data;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int ret;
|
||
|
|
||
|
ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_IR);
|
||
|
if (ret < 0) {
|
||
|
dev_err(dev, "%s(): Error %d enabling IR mode\n", __func__,
|
||
|
ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return isl29028_read_als_ir(chip, ir_data);
|
||
|
}
|
||
|
|
||
|
static int isl29028_set_pm_runtime_busy(struct isl29028_chip *chip, bool on)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int ret;
|
||
|
|
||
|
if (on) {
|
||
|
ret = pm_runtime_get_sync(dev);
|
||
|
if (ret < 0)
|
||
|
pm_runtime_put_noidle(dev);
|
||
|
} else {
|
||
|
pm_runtime_mark_last_busy(dev);
|
||
|
ret = pm_runtime_put_autosuspend(dev);
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* Channel IO */
|
||
|
static int isl29028_write_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int val, int val2, long mask)
|
||
|
{
|
||
|
struct isl29028_chip *chip = iio_priv(indio_dev);
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int ret;
|
||
|
|
||
|
ret = isl29028_set_pm_runtime_busy(chip, true);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
mutex_lock(&chip->lock);
|
||
|
|
||
|
ret = -EINVAL;
|
||
|
switch (chan->type) {
|
||
|
case IIO_PROXIMITY:
|
||
|
if (mask != IIO_CHAN_INFO_SAMP_FREQ) {
|
||
|
dev_err(dev,
|
||
|
"%s(): proximity: Mask value 0x%08lx is not supported\n",
|
||
|
__func__, mask);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (val < 1 || val > 100) {
|
||
|
dev_err(dev,
|
||
|
"%s(): proximity: Sampling frequency %d is not in the range [1:100]\n",
|
||
|
__func__, val);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
ret = isl29028_set_proxim_sampling(chip, val, val2);
|
||
|
break;
|
||
|
case IIO_LIGHT:
|
||
|
if (mask != IIO_CHAN_INFO_SCALE) {
|
||
|
dev_err(dev,
|
||
|
"%s(): light: Mask value 0x%08lx is not supported\n",
|
||
|
__func__, mask);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (val != 125 && val != 2000) {
|
||
|
dev_err(dev,
|
||
|
"%s(): light: Lux scale %d is not in the set {125, 2000}\n",
|
||
|
__func__, val);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
ret = isl29028_set_als_scale(chip, val);
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(dev, "%s(): Unsupported channel type %x\n",
|
||
|
__func__, chan->type);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
mutex_unlock(&chip->lock);
|
||
|
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = isl29028_set_pm_runtime_busy(chip, false);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int isl29028_read_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan,
|
||
|
int *val, int *val2, long mask)
|
||
|
{
|
||
|
struct isl29028_chip *chip = iio_priv(indio_dev);
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int ret, pm_ret;
|
||
|
|
||
|
ret = isl29028_set_pm_runtime_busy(chip, true);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
mutex_lock(&chip->lock);
|
||
|
|
||
|
ret = -EINVAL;
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
case IIO_CHAN_INFO_PROCESSED:
|
||
|
switch (chan->type) {
|
||
|
case IIO_LIGHT:
|
||
|
ret = isl29028_als_get(chip, val);
|
||
|
break;
|
||
|
case IIO_INTENSITY:
|
||
|
ret = isl29028_ir_get(chip, val);
|
||
|
break;
|
||
|
case IIO_PROXIMITY:
|
||
|
ret = isl29028_read_proxim(chip, val);
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (ret < 0)
|
||
|
break;
|
||
|
|
||
|
ret = IIO_VAL_INT;
|
||
|
break;
|
||
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
||
|
if (chan->type != IIO_PROXIMITY)
|
||
|
break;
|
||
|
|
||
|
*val = chip->prox_sampling_int;
|
||
|
*val2 = chip->prox_sampling_frac;
|
||
|
ret = IIO_VAL_INT;
|
||
|
break;
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
if (chan->type != IIO_LIGHT)
|
||
|
break;
|
||
|
*val = chip->lux_scale;
|
||
|
ret = IIO_VAL_INT;
|
||
|
break;
|
||
|
default:
|
||
|
dev_err(dev, "%s(): mask value 0x%08lx is not supported\n",
|
||
|
__func__, mask);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
mutex_unlock(&chip->lock);
|
||
|
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/**
|
||
|
* Preserve the ret variable if the call to
|
||
|
* isl29028_set_pm_runtime_busy() is successful so the reading
|
||
|
* (if applicable) is returned to user space.
|
||
|
*/
|
||
|
pm_ret = isl29028_set_pm_runtime_busy(chip, false);
|
||
|
if (pm_ret < 0)
|
||
|
return pm_ret;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
|
||
|
"1.25 2.5 5 10 13.3 20 80 100");
|
||
|
static IIO_CONST_ATTR(in_illuminance_scale_available, "125 2000");
|
||
|
|
||
|
#define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
|
||
|
static struct attribute *isl29028_attributes[] = {
|
||
|
ISL29028_CONST_ATTR(in_proximity_sampling_frequency_available),
|
||
|
ISL29028_CONST_ATTR(in_illuminance_scale_available),
|
||
|
NULL,
|
||
|
};
|
||
|
|
||
|
static const struct attribute_group isl29108_group = {
|
||
|
.attrs = isl29028_attributes,
|
||
|
};
|
||
|
|
||
|
static const struct iio_chan_spec isl29028_channels[] = {
|
||
|
{
|
||
|
.type = IIO_LIGHT,
|
||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
|
||
|
BIT(IIO_CHAN_INFO_SCALE),
|
||
|
}, {
|
||
|
.type = IIO_INTENSITY,
|
||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
||
|
}, {
|
||
|
.type = IIO_PROXIMITY,
|
||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||
|
BIT(IIO_CHAN_INFO_SAMP_FREQ),
|
||
|
}
|
||
|
};
|
||
|
|
||
|
static const struct iio_info isl29028_info = {
|
||
|
.attrs = &isl29108_group,
|
||
|
.read_raw = isl29028_read_raw,
|
||
|
.write_raw = isl29028_write_raw,
|
||
|
};
|
||
|
|
||
|
static int isl29028_clear_configure_reg(struct isl29028_chip *chip)
|
||
|
{
|
||
|
struct device *dev = regmap_get_device(chip->regmap);
|
||
|
int ret;
|
||
|
|
||
|
ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
|
||
|
if (ret < 0)
|
||
|
dev_err(dev, "%s(): Error %d clearing the CONFIGURE register\n",
|
||
|
__func__, ret);
|
||
|
|
||
|
chip->als_ir_mode = ISL29028_MODE_NONE;
|
||
|
chip->enable_prox = false;
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static bool isl29028_is_volatile_reg(struct device *dev, unsigned int reg)
|
||
|
{
|
||
|
switch (reg) {
|
||
|
case ISL29028_REG_INTERRUPT:
|
||
|
case ISL29028_REG_PROX_DATA:
|
||
|
case ISL29028_REG_ALSIR_L:
|
||
|
case ISL29028_REG_ALSIR_U:
|
||
|
return true;
|
||
|
default:
|
||
|
return false;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static const struct regmap_config isl29028_regmap_config = {
|
||
|
.reg_bits = 8,
|
||
|
.val_bits = 8,
|
||
|
.volatile_reg = isl29028_is_volatile_reg,
|
||
|
.max_register = ISL29028_NUM_REGS - 1,
|
||
|
.num_reg_defaults_raw = ISL29028_NUM_REGS,
|
||
|
.cache_type = REGCACHE_RBTREE,
|
||
|
};
|
||
|
|
||
|
static int isl29028_probe(struct i2c_client *client,
|
||
|
const struct i2c_device_id *id)
|
||
|
{
|
||
|
struct isl29028_chip *chip;
|
||
|
struct iio_dev *indio_dev;
|
||
|
int ret;
|
||
|
|
||
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
|
||
|
if (!indio_dev)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
chip = iio_priv(indio_dev);
|
||
|
|
||
|
i2c_set_clientdata(client, indio_dev);
|
||
|
mutex_init(&chip->lock);
|
||
|
|
||
|
chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
|
||
|
if (IS_ERR(chip->regmap)) {
|
||
|
ret = PTR_ERR(chip->regmap);
|
||
|
dev_err(&client->dev, "%s: Error %d initializing regmap\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
chip->enable_prox = false;
|
||
|
chip->prox_sampling_int = 20;
|
||
|
chip->prox_sampling_frac = 0;
|
||
|
chip->lux_scale = 2000;
|
||
|
|
||
|
ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&client->dev,
|
||
|
"%s(): Error %d writing to TEST1_MODE register\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&client->dev,
|
||
|
"%s(): Error %d writing to TEST2_MODE register\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
ret = isl29028_clear_configure_reg(chip);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
indio_dev->info = &isl29028_info;
|
||
|
indio_dev->channels = isl29028_channels;
|
||
|
indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
|
||
|
indio_dev->name = id->name;
|
||
|
indio_dev->dev.parent = &client->dev;
|
||
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
||
|
|
||
|
pm_runtime_enable(&client->dev);
|
||
|
pm_runtime_set_autosuspend_delay(&client->dev,
|
||
|
ISL29028_POWER_OFF_DELAY_MS);
|
||
|
pm_runtime_use_autosuspend(&client->dev);
|
||
|
|
||
|
ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&client->dev,
|
||
|
"%s(): iio registration failed with error %d\n",
|
||
|
__func__, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int isl29028_remove(struct i2c_client *client)
|
||
|
{
|
||
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
||
|
struct isl29028_chip *chip = iio_priv(indio_dev);
|
||
|
|
||
|
iio_device_unregister(indio_dev);
|
||
|
|
||
|
pm_runtime_disable(&client->dev);
|
||
|
pm_runtime_set_suspended(&client->dev);
|
||
|
pm_runtime_put_noidle(&client->dev);
|
||
|
|
||
|
return isl29028_clear_configure_reg(chip);
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused isl29028_suspend(struct device *dev)
|
||
|
{
|
||
|
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
|
||
|
struct isl29028_chip *chip = iio_priv(indio_dev);
|
||
|
int ret;
|
||
|
|
||
|
mutex_lock(&chip->lock);
|
||
|
|
||
|
ret = isl29028_clear_configure_reg(chip);
|
||
|
|
||
|
mutex_unlock(&chip->lock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int __maybe_unused isl29028_resume(struct device *dev)
|
||
|
{
|
||
|
/**
|
||
|
* The specific component (ALS/IR or proximity) will enable itself as
|
||
|
* needed the next time that the user requests a reading. This is done
|
||
|
* above in isl29028_set_als_ir_mode() and isl29028_enable_proximity().
|
||
|
*/
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct dev_pm_ops isl29028_pm_ops = {
|
||
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
|
||
|
pm_runtime_force_resume)
|
||
|
SET_RUNTIME_PM_OPS(isl29028_suspend, isl29028_resume, NULL)
|
||
|
};
|
||
|
|
||
|
static const struct i2c_device_id isl29028_id[] = {
|
||
|
{"isl29028", 0},
|
||
|
{"isl29030", 0},
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(i2c, isl29028_id);
|
||
|
|
||
|
static const struct of_device_id isl29028_of_match[] = {
|
||
|
{ .compatible = "isl,isl29028", }, /* for backward compat., don't use */
|
||
|
{ .compatible = "isil,isl29028", },
|
||
|
{ .compatible = "isil,isl29030", },
|
||
|
{ },
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, isl29028_of_match);
|
||
|
|
||
|
static struct i2c_driver isl29028_driver = {
|
||
|
.driver = {
|
||
|
.name = "isl29028",
|
||
|
.pm = &isl29028_pm_ops,
|
||
|
.of_match_table = isl29028_of_match,
|
||
|
},
|
||
|
.probe = isl29028_probe,
|
||
|
.remove = isl29028_remove,
|
||
|
.id_table = isl29028_id,
|
||
|
};
|
||
|
|
||
|
module_i2c_driver(isl29028_driver);
|
||
|
|
||
|
MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
|
||
|
MODULE_LICENSE("GPL v2");
|
||
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|