258 lines
7.9 KiB
C
258 lines
7.9 KiB
C
|
/*
|
||
|
|
* Intel Cherry Trail ACPI INT33FE pseudo device driver
|
||
|
|
*
|
||
|
|
* Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
|
* published by the Free Software Foundation.
|
||
|
|
*
|
||
|
|
* Some Intel Cherry Trail based device which ship with Windows 10, have
|
||
|
|
* this weird INT33FE ACPI device with a CRS table with 4 I2cSerialBusV2
|
||
|
|
* resources, for 4 different chips attached to various i2c busses:
|
||
|
|
* 1. The Whiskey Cove pmic, which is also described by the INT34D3 ACPI device
|
||
|
|
* 2. Maxim MAX17047 Fuel Gauge Controller
|
||
|
|
* 3. FUSB302 USB Type-C Controller
|
||
|
|
* 4. PI3USB30532 USB switch
|
||
|
|
*
|
||
|
|
* So this driver is a stub / pseudo driver whose only purpose is to
|
||
|
|
* instantiate i2c-clients for chips 2 - 4, so that standard i2c drivers
|
||
|
|
* for these chips can bind to the them.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/acpi.h>
|
||
|
|
#include <linux/i2c.h>
|
||
|
|
#include <linux/interrupt.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/platform_device.h>
|
||
|
|
#include <linux/regulator/consumer.h>
|
||
|
|
#include <linux/slab.h>
|
||
|
|
|
||
|
|
#define EXPECTED_PTYPE 4
|
||
|
|
|
||
|
|
struct cht_int33fe_data {
|
||
|
|
struct i2c_client *max17047;
|
||
|
|
struct i2c_client *fusb302;
|
||
|
|
struct i2c_client *pi3usb30532;
|
||
|
|
/* Contain a list-head must be per device */
|
||
|
|
struct device_connection connections[4];
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates
|
||
|
|
* the max17047 both through the INT33FE ACPI device (it is right there
|
||
|
|
* in the resources table) as well as through a separate MAX17047 device.
|
||
|
|
*
|
||
|
|
* These helpers are used to work around this by checking if an i2c-client
|
||
|
|
* for the max17047 has already been registered.
|
||
|
|
*/
|
||
|
|
static int cht_int33fe_check_for_max17047(struct device *dev, void *data)
|
||
|
|
{
|
||
|
|
struct i2c_client **max17047 = data;
|
||
|
|
struct acpi_device *adev;
|
||
|
|
const char *hid;
|
||
|
|
|
||
|
|
adev = ACPI_COMPANION(dev);
|
||
|
|
if (!adev)
|
||
|
|
return 0;
|
||
|
|
|
||
|
|
hid = acpi_device_hid(adev);
|
||
|
|
|
||
|
|
/* The MAX17047 ACPI node doesn't have an UID, so we don't check that */
|
||
|
|
if (strcmp(hid, "MAX17047"))
|
||
|
|
return 0;
|
||
|
|
|
||
|
|
*max17047 = to_i2c_client(dev);
|
||
|
|
return 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
static struct i2c_client *cht_int33fe_find_max17047(void)
|
||
|
|
{
|
||
|
|
struct i2c_client *max17047 = NULL;
|
||
|
|
|
||
|
|
i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
|
||
|
|
return max17047;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const char * const max17047_suppliers[] = { "bq24190-charger" };
|
||
|
|
|
||
|
|
static const struct property_entry max17047_props[] = {
|
||
|
|
PROPERTY_ENTRY_STRING_ARRAY("supplied-from", max17047_suppliers),
|
||
|
|
{ }
|
||
|
|
};
|
||
|
|
|
||
|
|
static const struct property_entry fusb302_props[] = {
|
||
|
|
PROPERTY_ENTRY_STRING("fcs,extcon-name", "cht_wcove_pwrsrc"),
|
||
|
|
PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000),
|
||
|
|
PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000),
|
||
|
|
PROPERTY_ENTRY_U32("fcs,max-sink-microwatt", 36000000),
|
||
|
|
{ }
|
||
|
|
};
|
||
|
|
|
||
|
|
static int cht_int33fe_probe(struct platform_device *pdev)
|
||
|
|
{
|
||
|
|
struct device *dev = &pdev->dev;
|
||
|
|
struct i2c_board_info board_info;
|
||
|
|
struct cht_int33fe_data *data;
|
||
|
|
struct i2c_client *max17047;
|
||
|
|
struct regulator *regulator;
|
||
|
|
unsigned long long ptyp;
|
||
|
|
acpi_status status;
|
||
|
|
int fusb302_irq;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
status = acpi_evaluate_integer(ACPI_HANDLE(dev), "PTYP", NULL, &ptyp);
|
||
|
|
if (ACPI_FAILURE(status)) {
|
||
|
|
dev_err(dev, "Error getting PTYPE\n");
|
||
|
|
return -ENODEV;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* The same ACPI HID is used for different configurations check PTYP
|
||
|
|
* to ensure that we are dealing with the expected config.
|
||
|
|
*/
|
||
|
|
if (ptyp != EXPECTED_PTYPE)
|
||
|
|
return -ENODEV;
|
||
|
|
|
||
|
|
/* Check presence of INT34D3 (hardware-rev 3) expected for ptype == 4 */
|
||
|
|
if (!acpi_dev_present("INT34D3", "1", 3)) {
|
||
|
|
dev_err(dev, "Error PTYPE == %d, but no INT34D3 device\n",
|
||
|
|
EXPECTED_PTYPE);
|
||
|
|
return -ENODEV;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* We expect the WC PMIC to be paired with a TI bq24292i charger-IC.
|
||
|
|
* We check for the bq24292i vbus regulator here, this has 2 purposes:
|
||
|
|
* 1) The bq24292i allows charging with up to 12V, setting the fusb302's
|
||
|
|
* max-snk voltage to 12V with another charger-IC is not good.
|
||
|
|
* 2) For the fusb302 driver to get the bq24292i vbus regulator, the
|
||
|
|
* regulator-map, which is part of the bq24292i regulator_init_data,
|
||
|
|
* must be registered before the fusb302 is instantiated, otherwise
|
||
|
|
* it will end up with a dummy-regulator.
|
||
|
|
* Note "cht_wc_usb_typec_vbus" comes from the regulator_init_data
|
||
|
|
* which is defined in i2c-cht-wc.c from where the bq24292i i2c-client
|
||
|
|
* gets instantiated. We use regulator_get_optional here so that we
|
||
|
|
* don't end up getting a dummy-regulator ourselves.
|
||
|
|
*/
|
||
|
|
regulator = regulator_get_optional(dev, "cht_wc_usb_typec_vbus");
|
||
|
|
if (IS_ERR(regulator)) {
|
||
|
|
ret = PTR_ERR(regulator);
|
||
|
|
return (ret == -ENODEV) ? -EPROBE_DEFER : ret;
|
||
|
|
}
|
||
|
|
regulator_put(regulator);
|
||
|
|
|
||
|
|
/* The FUSB302 uses the irq at index 1 and is the only irq user */
|
||
|
|
fusb302_irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 1);
|
||
|
|
if (fusb302_irq < 0) {
|
||
|
|
if (fusb302_irq != -EPROBE_DEFER)
|
||
|
|
dev_err(dev, "Error getting FUSB302 irq\n");
|
||
|
|
return fusb302_irq;
|
||
|
|
}
|
||
|
|
|
||
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
||
|
|
if (!data)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
/* Work around BIOS bug, see comment on cht_int33fe_find_max17047 */
|
||
|
|
max17047 = cht_int33fe_find_max17047();
|
||
|
|
if (max17047) {
|
||
|
|
/* Pre-existing i2c-client for the max17047, add device-props */
|
||
|
|
ret = device_add_properties(&max17047->dev, max17047_props);
|
||
|
|
if (ret)
|
||
|
|
return ret;
|
||
|
|
/* And re-probe to get the new device-props applied. */
|
||
|
|
ret = device_reprobe(&max17047->dev);
|
||
|
|
if (ret)
|
||
|
|
dev_warn(dev, "Reprobing max17047 error: %d\n", ret);
|
||
|
|
} else {
|
||
|
|
memset(&board_info, 0, sizeof(board_info));
|
||
|
|
strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
|
||
|
|
board_info.dev_name = "max17047";
|
||
|
|
board_info.properties = max17047_props;
|
||
|
|
data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
|
||
|
|
if (!data->max17047)
|
||
|
|
return -EPROBE_DEFER; /* Wait for i2c-adapter to load */
|
||
|
|
}
|
||
|
|
|
||
|
|
data->connections[0].endpoint[0] = "port0";
|
||
|
|
data->connections[0].endpoint[1] = "i2c-pi3usb30532-switch";
|
||
|
|
data->connections[0].id = "orientation-switch";
|
||
|
|
data->connections[1].endpoint[0] = "port0";
|
||
|
|
data->connections[1].endpoint[1] = "i2c-pi3usb30532-mux";
|
||
|
|
data->connections[1].id = "mode-switch";
|
||
|
|
data->connections[2].endpoint[0] = "i2c-fusb302";
|
||
|
|
data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
|
||
|
|
data->connections[2].id = "usb-role-switch";
|
||
|
|
|
||
|
|
device_connections_add(data->connections);
|
||
|
|
|
||
|
|
memset(&board_info, 0, sizeof(board_info));
|
||
|
|
strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
|
||
|
|
board_info.dev_name = "fusb302";
|
||
|
|
board_info.properties = fusb302_props;
|
||
|
|
board_info.irq = fusb302_irq;
|
||
|
|
|
||
|
|
data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info);
|
||
|
|
if (!data->fusb302)
|
||
|
|
goto out_unregister_max17047;
|
||
|
|
|
||
|
|
memset(&board_info, 0, sizeof(board_info));
|
||
|
|
board_info.dev_name = "pi3usb30532";
|
||
|
|
strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
|
||
|
|
|
||
|
|
data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
|
||
|
|
if (!data->pi3usb30532)
|
||
|
|
goto out_unregister_fusb302;
|
||
|
|
|
||
|
|
platform_set_drvdata(pdev, data);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
|
||
|
|
out_unregister_fusb302:
|
||
|
|
i2c_unregister_device(data->fusb302);
|
||
|
|
|
||
|
|
out_unregister_max17047:
|
||
|
|
if (data->max17047)
|
||
|
|
i2c_unregister_device(data->max17047);
|
||
|
|
|
||
|
|
device_connections_remove(data->connections);
|
||
|
|
|
||
|
|
return -EPROBE_DEFER; /* Wait for the i2c-adapter to load */
|
||
|
|
}
|
||
|
|
|
||
|
|
static int cht_int33fe_remove(struct platform_device *pdev)
|
||
|
|
{
|
||
|
|
struct cht_int33fe_data *data = platform_get_drvdata(pdev);
|
||
|
|
|
||
|
|
i2c_unregister_device(data->pi3usb30532);
|
||
|
|
i2c_unregister_device(data->fusb302);
|
||
|
|
if (data->max17047)
|
||
|
|
i2c_unregister_device(data->max17047);
|
||
|
|
|
||
|
|
device_connections_remove(data->connections);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct acpi_device_id cht_int33fe_acpi_ids[] = {
|
||
|
|
{ "INT33FE", },
|
||
|
|
{ }
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(acpi, cht_int33fe_acpi_ids);
|
||
|
|
|
||
|
|
static struct platform_driver cht_int33fe_driver = {
|
||
|
|
.driver = {
|
||
|
|
.name = "Intel Cherry Trail ACPI INT33FE driver",
|
||
|
|
.acpi_match_table = ACPI_PTR(cht_int33fe_acpi_ids),
|
||
|
|
},
|
||
|
|
.probe = cht_int33fe_probe,
|
||
|
|
.remove = cht_int33fe_remove,
|
||
|
|
};
|
||
|
|
|
||
|
|
module_platform_driver(cht_int33fe_driver);
|
||
|
|
|
||
|
|
MODULE_DESCRIPTION("Intel Cherry Trail ACPI INT33FE pseudo device driver");
|
||
|
|
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
||
|
|
MODULE_LICENSE("GPL");
|