36 lines
1.1 KiB
Plaintext
36 lines
1.1 KiB
Plaintext
|
Regulator Vibrator Device Tree Bindings
|
||
|
|
Registers a regulator device as vibrator.
|
||
|
|
|
||
|
|
Required Properties:
|
||
|
|
- compatible : Should be "regulator-vibrator"
|
||
|
|
- vibr-supply : Power supply to the vibrator.
|
||
|
|
refer Documentation/devicetree/bindings/regulator/regulator.txt
|
||
|
|
- min-volt : The minimum voltage value supplied to the vibrator regulator.
|
||
|
|
- max-volt : The maximum voltage value supplied to the vibrator regulator.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- min-limit: Set the minimum time in ms for vibrator , default is 15ms,
|
||
|
|
if user request duration is smaller, this value will be used instead.
|
||
|
|
the default value comes from the smallest unit that can be sensed by the test.
|
||
|
|
- max-limit: Set the maximum time in ms for vibrator.
|
||
|
|
if not set, it means no max limitation.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
mt6359_vibr_ldo_reg: ldo_vibr {
|
||
|
|
regulator-name = "vibr";
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-enable-ramp-delay = <240>;
|
||
|
|
};
|
||
|
|
|
||
|
|
regulator_vibrator {
|
||
|
|
compatible = "regulator-vibrator";
|
||
|
|
min-volt = <2300000>;
|
||
|
|
max-volt = <3200000>;
|
||
|
|
max-limit = <15000>;
|
||
|
|
min-limit = <15>;
|
||
|
|
vib-supply = <&mt6359_vibr_ldo_reg>;
|
||
|
|
};
|
||
|
|
|