67 lines
2.5 KiB
Plaintext
67 lines
2.5 KiB
Plaintext
|
Freescale Asynchronous Sample Rate Converter (ASRC) Controller
|
||
|
|
|
||
|
|
The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
|
||
|
|
signal associated with an input clock into a signal associated with a different
|
||
|
|
output clock. The driver currently works as a Front End of DPCM with other Back
|
||
|
|
Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support
|
||
|
|
three substreams within totally 10 channels.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
|
||
|
|
- compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
|
||
|
|
|
||
|
|
- reg : Offset and length of the register set for the device.
|
||
|
|
|
||
|
|
- interrupts : Contains the spdif interrupt.
|
||
|
|
|
||
|
|
- dmas : Generic dma devicetree binding as described in
|
||
|
|
Documentation/devicetree/bindings/dma/dma.txt.
|
||
|
|
|
||
|
|
- dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc".
|
||
|
|
|
||
|
|
- clocks : Contains an entry for each entry in clock-names.
|
||
|
|
|
||
|
|
- clock-names : Contains the following entries
|
||
|
|
"mem" Peripheral access clock to access registers.
|
||
|
|
"ipg" Peripheral clock to driver module.
|
||
|
|
"asrck_<0-f>" Clock sources for input and output clock.
|
||
|
|
"spba" The spba clock is required when ASRC is placed as a
|
||
|
|
bus slave of the Shared Peripheral Bus and when two
|
||
|
|
or more bus masters (CPU, DMA or DSP) try to access
|
||
|
|
it. This property is optional depending on the SoC
|
||
|
|
design.
|
||
|
|
|
||
|
|
- fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends.
|
||
|
|
|
||
|
|
- fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
|
||
|
|
- big-endian : If this property is absent, the little endian mode
|
||
|
|
will be in use as default. Otherwise, the big endian
|
||
|
|
mode will be in use for all the device registers.
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
asrc: asrc@2034000 {
|
||
|
|
compatible = "fsl,imx53-asrc";
|
||
|
|
reg = <0x02034000 0x4000>;
|
||
|
|
interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
clocks = <&clks 107>, <&clks 107>, <&clks 0>,
|
||
|
|
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||
|
|
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||
|
|
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||
|
|
<&clks 107>, <&clks 0>, <&clks 0>;
|
||
|
|
clock-names = "mem", "ipg", "asrck0",
|
||
|
|
"asrck_1", "asrck_2", "asrck_3", "asrck_4",
|
||
|
|
"asrck_5", "asrck_6", "asrck_7", "asrck_8",
|
||
|
|
"asrck_9", "asrck_a", "asrck_b", "asrck_c",
|
||
|
|
"asrck_d", "asrck_e", "asrck_f";
|
||
|
|
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
|
||
|
|
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
|
||
|
|
dma-names = "rxa", "rxb", "rxc",
|
||
|
|
"txa", "txb", "txc";
|
||
|
|
fsl,asrc-rate = <48000>;
|
||
|
|
fsl,asrc-width = <16>;
|
||
|
|
};
|