38 lines
1.3 KiB
Plaintext
38 lines
1.3 KiB
Plaintext
|
LAN9303 Ethernet switch driver
|
||
|
|
==============================
|
||
|
|
|
||
|
|
The LAN9303 is a three port 10/100 Mbps ethernet switch with integrated phys for
|
||
|
|
the two external ethernet ports. The third port is an RMII/MII interface to a
|
||
|
|
host master network interface (e.g. fixed link).
|
||
|
|
|
||
|
|
|
||
|
|
Driver details
|
||
|
|
==============
|
||
|
|
|
||
|
|
The driver is implemented as a DSA driver, see
|
||
|
|
Documentation/networking/dsa/dsa.txt.
|
||
|
|
|
||
|
|
See Documentation/devicetree/bindings/net/dsa/lan9303.txt for device tree
|
||
|
|
binding.
|
||
|
|
|
||
|
|
The LAN9303 can be managed both via MDIO and I2C, both supported by this driver.
|
||
|
|
|
||
|
|
At startup the driver configures the device to provide two separate network
|
||
|
|
interfaces (which is the default state of a DSA device). Due to HW limitations,
|
||
|
|
no HW MAC learning takes place in this mode.
|
||
|
|
|
||
|
|
When both user ports are joined to the same bridge, the normal HW MAC learning
|
||
|
|
is enabled. This means that unicast traffic is forwarded in HW. Broadcast and
|
||
|
|
multicast is flooded in HW. STP is also supported in this mode. The driver
|
||
|
|
support fdb/mdb operations as well, meaning IGMP snooping is supported.
|
||
|
|
|
||
|
|
If one of the user ports leave the bridge, the ports goes back to the initial
|
||
|
|
separated operation.
|
||
|
|
|
||
|
|
|
||
|
|
Driver limitations
|
||
|
|
==================
|
||
|
|
|
||
|
|
- Support for VLAN filtering is not implemented
|
||
|
|
- The HW does not support VLAN-specific fdb entries
|