339 lines
7.3 KiB
Plaintext
339 lines
7.3 KiB
Plaintext
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
#include <dt-bindings/mfd/max77620.h>
|
||
|
|
||
|
#include "tegra210.dtsi"
|
||
|
|
||
|
/ {
|
||
|
model = "NVIDIA Jetson TX1";
|
||
|
compatible = "nvidia,p2180", "nvidia,tegra210";
|
||
|
|
||
|
aliases {
|
||
|
rtc0 = "/i2c@7000d000/pmic@3c";
|
||
|
rtc1 = "/rtc@7000e000";
|
||
|
serial0 = &uarta;
|
||
|
};
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = "serial0:115200n8";
|
||
|
};
|
||
|
|
||
|
memory {
|
||
|
device_type = "memory";
|
||
|
reg = <0x0 0x80000000 0x1 0x0>;
|
||
|
};
|
||
|
|
||
|
gpu@57000000 {
|
||
|
vdd-supply = <&vdd_gpu>;
|
||
|
};
|
||
|
|
||
|
/* debug port */
|
||
|
serial@70006000 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
i2c@7000d000 {
|
||
|
status = "okay";
|
||
|
clock-frequency = <400000>;
|
||
|
|
||
|
pmic: pmic@3c {
|
||
|
compatible = "maxim,max77620";
|
||
|
reg = <0x3c>;
|
||
|
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
||
|
#interrupt-cells = <2>;
|
||
|
interrupt-controller;
|
||
|
|
||
|
#gpio-cells = <2>;
|
||
|
gpio-controller;
|
||
|
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&max77620_default>;
|
||
|
|
||
|
max77620_default: pinmux {
|
||
|
gpio0 {
|
||
|
pins = "gpio0";
|
||
|
function = "gpio";
|
||
|
};
|
||
|
|
||
|
gpio1 {
|
||
|
pins = "gpio1";
|
||
|
function = "fps-out";
|
||
|
drive-push-pull = <1>;
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||
|
maxim,active-fps-power-up-slot = <7>;
|
||
|
maxim,active-fps-power-down-slot = <0>;
|
||
|
};
|
||
|
|
||
|
gpio2_3 {
|
||
|
pins = "gpio2", "gpio3";
|
||
|
function = "fps-out";
|
||
|
drive-open-drain = <1>;
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||
|
};
|
||
|
|
||
|
gpio4 {
|
||
|
pins = "gpio4";
|
||
|
function = "32k-out1";
|
||
|
};
|
||
|
|
||
|
gpio5_6_7 {
|
||
|
pins = "gpio5", "gpio6", "gpio7";
|
||
|
function = "gpio";
|
||
|
drive-push-pull = <1>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
fps {
|
||
|
fps0 {
|
||
|
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
|
||
|
maxim,suspend-fps-time-period-us = <1280>;
|
||
|
};
|
||
|
|
||
|
fps1 {
|
||
|
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
|
||
|
maxim,suspend-fps-time-period-us = <1280>;
|
||
|
};
|
||
|
|
||
|
fps2 {
|
||
|
maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
regulators {
|
||
|
in-ldo0-1-supply = <&vdd_pre>;
|
||
|
in-ldo7-8-supply = <&vdd_pre>;
|
||
|
in-sd3-supply = <&vdd_5v0_sys>;
|
||
|
|
||
|
vdd_soc: sd0 {
|
||
|
regulator-name = "VDD_SOC";
|
||
|
regulator-min-microvolt = <600000>;
|
||
|
regulator-max-microvolt = <1400000>;
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-enable-ramp-delay = <146>;
|
||
|
regulator-ramp-delay = <27500>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||
|
};
|
||
|
|
||
|
vdd_ddr: sd1 {
|
||
|
regulator-name = "VDD_DDR_1V1_PMIC";
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-enable-ramp-delay = <130>;
|
||
|
regulator-ramp-delay = <27500>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||
|
};
|
||
|
|
||
|
vdd_pre: sd2 {
|
||
|
regulator-name = "VDD_PRE_REG_1V35";
|
||
|
regulator-min-microvolt = <1350000>;
|
||
|
regulator-max-microvolt = <1350000>;
|
||
|
|
||
|
regulator-enable-ramp-delay = <176>;
|
||
|
regulator-ramp-delay = <27500>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||
|
};
|
||
|
|
||
|
vdd_1v8: sd3 {
|
||
|
regulator-name = "VDD_1V8";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-enable-ramp-delay = <242>;
|
||
|
regulator-ramp-delay = <27500>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||
|
};
|
||
|
|
||
|
vdd_sys_1v2: ldo0 {
|
||
|
regulator-name = "AVDD_SYS_1V2";
|
||
|
regulator-min-microvolt = <1200000>;
|
||
|
regulator-max-microvolt = <1200000>;
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-enable-ramp-delay = <26>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||
|
};
|
||
|
|
||
|
vdd_pex_1v05: ldo1 {
|
||
|
regulator-name = "VDD_PEX_1V05";
|
||
|
regulator-min-microvolt = <1050000>;
|
||
|
regulator-max-microvolt = <1050000>;
|
||
|
|
||
|
regulator-enable-ramp-delay = <22>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||
|
};
|
||
|
|
||
|
vddio_sdmmc: ldo2 {
|
||
|
regulator-name = "VDDIO_SDMMC";
|
||
|
/*
|
||
|
* Technically this supply should have
|
||
|
* a supported range from 1.8 - 3.3 V.
|
||
|
* However, that would cause the SDHCI
|
||
|
* driver to request 2.7 V upon access
|
||
|
* and that in turn will cause traffic
|
||
|
* to be broken. Leave it at 3.3 V for
|
||
|
* now.
|
||
|
*/
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-enable-ramp-delay = <62>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||
|
};
|
||
|
|
||
|
vdd_cam_hv: ldo3 {
|
||
|
regulator-name = "VDD_CAM_HV";
|
||
|
regulator-min-microvolt = <2800000>;
|
||
|
regulator-max-microvolt = <2800000>;
|
||
|
|
||
|
regulator-enable-ramp-delay = <50>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||
|
};
|
||
|
|
||
|
vdd_rtc: ldo4 {
|
||
|
regulator-name = "VDD_RTC";
|
||
|
regulator-min-microvolt = <850000>;
|
||
|
regulator-max-microvolt = <850000>;
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-enable-ramp-delay = <22>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||
|
};
|
||
|
|
||
|
vdd_ts_hv: ldo5 {
|
||
|
regulator-name = "VDD_TS_HV";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
|
||
|
regulator-enable-ramp-delay = <62>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_NONE>;
|
||
|
};
|
||
|
|
||
|
vdd_ts: ldo6 {
|
||
|
regulator-name = "VDD_TS_1V8";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
|
||
|
regulator-enable-ramp-delay = <36>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_0>;
|
||
|
maxim,active-fps-power-up-slot = <7>;
|
||
|
maxim,active-fps-power-down-slot = <0>;
|
||
|
};
|
||
|
|
||
|
avdd_1v05_pll: ldo7 {
|
||
|
regulator-name = "AVDD_1V05_PLL";
|
||
|
regulator-min-microvolt = <1050000>;
|
||
|
regulator-max-microvolt = <1050000>;
|
||
|
regulator-always-on;
|
||
|
regulator-boot-on;
|
||
|
|
||
|
regulator-enable-ramp-delay = <24>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||
|
};
|
||
|
|
||
|
avdd_1v05: ldo8 {
|
||
|
regulator-name = "AVDD_SATA_HDMI_DP_1V05";
|
||
|
regulator-min-microvolt = <1050000>;
|
||
|
regulator-max-microvolt = <1050000>;
|
||
|
|
||
|
regulator-enable-ramp-delay = <22>;
|
||
|
regulator-ramp-delay = <100000>;
|
||
|
|
||
|
maxim,active-fps-source = <MAX77620_FPS_SRC_1>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
pmc@7000e400 {
|
||
|
nvidia,invert-interrupt;
|
||
|
};
|
||
|
|
||
|
/* eMMC */
|
||
|
sdhci@700b0600 {
|
||
|
status = "okay";
|
||
|
bus-width = <8>;
|
||
|
non-removable;
|
||
|
vqmmc-supply = <&vdd_1v8>;
|
||
|
};
|
||
|
|
||
|
clocks {
|
||
|
compatible = "simple-bus";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
clk32k_in: clock@0 {
|
||
|
compatible = "fixed-clock";
|
||
|
reg = <0>;
|
||
|
#clock-cells = <0>;
|
||
|
clock-frequency = <32768>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
cpus {
|
||
|
cpu@0 {
|
||
|
enable-method = "psci";
|
||
|
};
|
||
|
|
||
|
cpu@1 {
|
||
|
enable-method = "psci";
|
||
|
};
|
||
|
|
||
|
cpu@2 {
|
||
|
enable-method = "psci";
|
||
|
};
|
||
|
|
||
|
cpu@3 {
|
||
|
enable-method = "psci";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
psci {
|
||
|
compatible = "arm,psci-0.2";
|
||
|
method = "smc";
|
||
|
};
|
||
|
|
||
|
regulators {
|
||
|
vdd_gpu: regulator@100 {
|
||
|
compatible = "pwm-regulator";
|
||
|
reg = <100>;
|
||
|
pwms = <&pwm 1 4880>;
|
||
|
regulator-name = "VDD_GPU";
|
||
|
regulator-min-microvolt = <710000>;
|
||
|
regulator-max-microvolt = <1320000>;
|
||
|
enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>;
|
||
|
regulator-ramp-delay = <80>;
|
||
|
regulator-enable-ramp-delay = <2000>;
|
||
|
regulator-settling-time-us = <160>;
|
||
|
};
|
||
|
};
|
||
|
};
|