392 lines
12 KiB
C
392 lines
12 KiB
C
|
/*
|
||
|
|
* Copyright (c) 2010 Broadcom Corporation
|
||
|
|
*
|
||
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
||
|
|
* purpose with or without fee is hereby granted, provided that the above
|
||
|
|
* copyright notice and this permission notice appear in all copies.
|
||
|
|
*
|
||
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
||
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
||
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
||
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef BRCMFMAC_SDIO_H
|
||
|
|
#define BRCMFMAC_SDIO_H
|
||
|
|
|
||
|
|
#include <linux/skbuff.h>
|
||
|
|
#include <linux/firmware.h>
|
||
|
|
#include "firmware.h"
|
||
|
|
|
||
|
|
#define SDIOD_FBR_SIZE 0x100
|
||
|
|
|
||
|
|
/* io_en */
|
||
|
|
#define SDIO_FUNC_ENABLE_1 0x02
|
||
|
|
#define SDIO_FUNC_ENABLE_2 0x04
|
||
|
|
|
||
|
|
/* io_rdys */
|
||
|
|
#define SDIO_FUNC_READY_1 0x02
|
||
|
|
#define SDIO_FUNC_READY_2 0x04
|
||
|
|
|
||
|
|
/* intr_status */
|
||
|
|
#define INTR_STATUS_FUNC1 0x2
|
||
|
|
#define INTR_STATUS_FUNC2 0x4
|
||
|
|
|
||
|
|
/* mask of register map */
|
||
|
|
#define REG_F0_REG_MASK 0x7FF
|
||
|
|
#define REG_F1_MISC_MASK 0x1FFFF
|
||
|
|
|
||
|
|
/* function 0 vendor specific CCCR registers */
|
||
|
|
|
||
|
|
#define SDIO_CCCR_BRCM_CARDCAP 0xf0
|
||
|
|
#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT BIT(1)
|
||
|
|
#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT BIT(2)
|
||
|
|
#define SDIO_CCCR_BRCM_CARDCAP_CMD_NODEC BIT(3)
|
||
|
|
|
||
|
|
/* Interrupt enable bits for each function */
|
||
|
|
#define SDIO_CCCR_IEN_FUNC0 BIT(0)
|
||
|
|
#define SDIO_CCCR_IEN_FUNC1 BIT(1)
|
||
|
|
#define SDIO_CCCR_IEN_FUNC2 BIT(2)
|
||
|
|
|
||
|
|
#define SDIO_CCCR_BRCM_CARDCTRL 0xf1
|
||
|
|
#define SDIO_CCCR_BRCM_CARDCTRL_WLANRESET BIT(1)
|
||
|
|
|
||
|
|
#define SDIO_CCCR_BRCM_SEPINT 0xf2
|
||
|
|
#define SDIO_CCCR_BRCM_SEPINT_MASK BIT(0)
|
||
|
|
#define SDIO_CCCR_BRCM_SEPINT_OE BIT(1)
|
||
|
|
#define SDIO_CCCR_BRCM_SEPINT_ACT_HI BIT(2)
|
||
|
|
|
||
|
|
/* function 1 miscellaneous registers */
|
||
|
|
|
||
|
|
/* sprom command and status */
|
||
|
|
#define SBSDIO_SPROM_CS 0x10000
|
||
|
|
/* sprom info register */
|
||
|
|
#define SBSDIO_SPROM_INFO 0x10001
|
||
|
|
/* sprom indirect access data byte 0 */
|
||
|
|
#define SBSDIO_SPROM_DATA_LOW 0x10002
|
||
|
|
/* sprom indirect access data byte 1 */
|
||
|
|
#define SBSDIO_SPROM_DATA_HIGH 0x10003
|
||
|
|
/* sprom indirect access addr byte 0 */
|
||
|
|
#define SBSDIO_SPROM_ADDR_LOW 0x10004
|
||
|
|
/* gpio select */
|
||
|
|
#define SBSDIO_GPIO_SELECT 0x10005
|
||
|
|
/* gpio output */
|
||
|
|
#define SBSDIO_GPIO_OUT 0x10006
|
||
|
|
/* gpio enable */
|
||
|
|
#define SBSDIO_GPIO_EN 0x10007
|
||
|
|
/* rev < 7, watermark for sdio device TX path */
|
||
|
|
#define SBSDIO_WATERMARK 0x10008
|
||
|
|
/* control busy signal generation */
|
||
|
|
#define SBSDIO_DEVICE_CTL 0x10009
|
||
|
|
|
||
|
|
/* SB Address Window Low (b15) */
|
||
|
|
#define SBSDIO_FUNC1_SBADDRLOW 0x1000A
|
||
|
|
/* SB Address Window Mid (b23:b16) */
|
||
|
|
#define SBSDIO_FUNC1_SBADDRMID 0x1000B
|
||
|
|
/* SB Address Window High (b31:b24) */
|
||
|
|
#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C
|
||
|
|
/* Frame Control (frame term/abort) */
|
||
|
|
#define SBSDIO_FUNC1_FRAMECTRL 0x1000D
|
||
|
|
/* ChipClockCSR (ALP/HT ctl/status) */
|
||
|
|
#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E
|
||
|
|
/* SdioPullUp (on cmd, d0-d2) */
|
||
|
|
#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F
|
||
|
|
/* Write Frame Byte Count Low */
|
||
|
|
#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019
|
||
|
|
/* Write Frame Byte Count High */
|
||
|
|
#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A
|
||
|
|
/* Read Frame Byte Count Low */
|
||
|
|
#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B
|
||
|
|
/* Read Frame Byte Count High */
|
||
|
|
#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C
|
||
|
|
/* MesBusyCtl (rev 11) */
|
||
|
|
#define SBSDIO_FUNC1_MESBUSYCTRL 0x1001D
|
||
|
|
/* Watermark for sdio device RX path */
|
||
|
|
#define SBSDIO_MESBUSY_RXFIFO_WM_MASK 0x7F
|
||
|
|
#define SBSDIO_MESBUSY_RXFIFO_WM_SHIFT 0
|
||
|
|
/* Enable busy capability for MES access */
|
||
|
|
#define SBSDIO_MESBUSYCTRL_ENAB 0x80
|
||
|
|
#define SBSDIO_MESBUSYCTRL_ENAB_SHIFT 7
|
||
|
|
|
||
|
|
/* Sdio Core Rev 12 */
|
||
|
|
#define SBSDIO_FUNC1_WAKEUPCTRL 0x1001E
|
||
|
|
#define SBSDIO_FUNC1_WCTRL_ALPWAIT_MASK 0x1
|
||
|
|
#define SBSDIO_FUNC1_WCTRL_ALPWAIT_SHIFT 0
|
||
|
|
#define SBSDIO_FUNC1_WCTRL_HTWAIT_MASK 0x2
|
||
|
|
#define SBSDIO_FUNC1_WCTRL_HTWAIT_SHIFT 1
|
||
|
|
#define SBSDIO_FUNC1_SLEEPCSR 0x1001F
|
||
|
|
#define SBSDIO_FUNC1_SLEEPCSR_KSO_MASK 0x1
|
||
|
|
#define SBSDIO_FUNC1_SLEEPCSR_KSO_SHIFT 0
|
||
|
|
#define SBSDIO_FUNC1_SLEEPCSR_KSO_EN 1
|
||
|
|
#define SBSDIO_FUNC1_SLEEPCSR_DEVON_MASK 0x2
|
||
|
|
#define SBSDIO_FUNC1_SLEEPCSR_DEVON_SHIFT 1
|
||
|
|
|
||
|
|
#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
|
||
|
|
#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001F /* f1 misc register end */
|
||
|
|
|
||
|
|
/* function 1 OCP space */
|
||
|
|
|
||
|
|
/* sb offset addr is <= 15 bits, 32k */
|
||
|
|
#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF
|
||
|
|
#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
|
||
|
|
/* with b15, maps to 32-bit SB access */
|
||
|
|
#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000
|
||
|
|
|
||
|
|
/* Address bits from SBADDR regs */
|
||
|
|
#define SBSDIO_SBWINDOW_MASK 0xffff8000
|
||
|
|
|
||
|
|
#define SDIOH_READ 0 /* Read request */
|
||
|
|
#define SDIOH_WRITE 1 /* Write request */
|
||
|
|
|
||
|
|
#define SDIOH_DATA_FIX 0 /* Fixed addressing */
|
||
|
|
#define SDIOH_DATA_INC 1 /* Incremental addressing */
|
||
|
|
|
||
|
|
/* internal return code */
|
||
|
|
#define SUCCESS 0
|
||
|
|
#define ERROR 1
|
||
|
|
|
||
|
|
/* Packet alignment for most efficient SDIO (can change based on platform) */
|
||
|
|
#define BRCMF_SDALIGN (1 << 6)
|
||
|
|
|
||
|
|
/* watchdog polling interval */
|
||
|
|
#define BRCMF_WD_POLL msecs_to_jiffies(10)
|
||
|
|
|
||
|
|
/**
|
||
|
|
* enum brcmf_sdiod_state - the state of the bus.
|
||
|
|
*
|
||
|
|
* @BRCMF_SDIOD_DOWN: Device can be accessed, no DPC.
|
||
|
|
* @BRCMF_SDIOD_DATA: Ready for data transfers, DPC enabled.
|
||
|
|
* @BRCMF_SDIOD_NOMEDIUM: No medium access to dongle possible.
|
||
|
|
*/
|
||
|
|
enum brcmf_sdiod_state {
|
||
|
|
BRCMF_SDIOD_DOWN,
|
||
|
|
BRCMF_SDIOD_DATA,
|
||
|
|
BRCMF_SDIOD_NOMEDIUM
|
||
|
|
};
|
||
|
|
|
||
|
|
struct brcmf_sdreg {
|
||
|
|
int func;
|
||
|
|
int offset;
|
||
|
|
int value;
|
||
|
|
};
|
||
|
|
|
||
|
|
struct brcmf_sdio;
|
||
|
|
struct brcmf_sdiod_freezer;
|
||
|
|
|
||
|
|
struct brcmf_sdio_dev {
|
||
|
|
struct sdio_func *func1;
|
||
|
|
struct sdio_func *func2;
|
||
|
|
u32 sbwad; /* Save backplane window address */
|
||
|
|
struct brcmf_core *cc_core; /* chipcommon core info struct */
|
||
|
|
struct brcmf_sdio *bus;
|
||
|
|
struct device *dev;
|
||
|
|
struct brcmf_bus *bus_if;
|
||
|
|
struct brcmf_mp_device *settings;
|
||
|
|
bool oob_irq_requested;
|
||
|
|
bool sd_irq_requested;
|
||
|
|
bool irq_en; /* irq enable flags */
|
||
|
|
spinlock_t irq_en_lock;
|
||
|
|
bool irq_wake; /* irq wake enable flags */
|
||
|
|
bool sg_support;
|
||
|
|
uint max_request_size;
|
||
|
|
ushort max_segment_count;
|
||
|
|
uint max_segment_size;
|
||
|
|
uint txglomsz;
|
||
|
|
struct sg_table sgtable;
|
||
|
|
char fw_name[BRCMF_FW_NAME_LEN];
|
||
|
|
char nvram_name[BRCMF_FW_NAME_LEN];
|
||
|
|
bool wowl_enabled;
|
||
|
|
enum brcmf_sdiod_state state;
|
||
|
|
struct brcmf_sdiod_freezer *freezer;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* sdio core registers */
|
||
|
|
struct sdpcmd_regs {
|
||
|
|
u32 corecontrol; /* 0x00, rev8 */
|
||
|
|
u32 corestatus; /* rev8 */
|
||
|
|
u32 PAD[1];
|
||
|
|
u32 biststatus; /* rev8 */
|
||
|
|
|
||
|
|
/* PCMCIA access */
|
||
|
|
u16 pcmciamesportaladdr; /* 0x010, rev8 */
|
||
|
|
u16 PAD[1];
|
||
|
|
u16 pcmciamesportalmask; /* rev8 */
|
||
|
|
u16 PAD[1];
|
||
|
|
u16 pcmciawrframebc; /* rev8 */
|
||
|
|
u16 PAD[1];
|
||
|
|
u16 pcmciaunderflowtimer; /* rev8 */
|
||
|
|
u16 PAD[1];
|
||
|
|
|
||
|
|
/* interrupt */
|
||
|
|
u32 intstatus; /* 0x020, rev8 */
|
||
|
|
u32 hostintmask; /* rev8 */
|
||
|
|
u32 intmask; /* rev8 */
|
||
|
|
u32 sbintstatus; /* rev8 */
|
||
|
|
u32 sbintmask; /* rev8 */
|
||
|
|
u32 funcintmask; /* rev4 */
|
||
|
|
u32 PAD[2];
|
||
|
|
u32 tosbmailbox; /* 0x040, rev8 */
|
||
|
|
u32 tohostmailbox; /* rev8 */
|
||
|
|
u32 tosbmailboxdata; /* rev8 */
|
||
|
|
u32 tohostmailboxdata; /* rev8 */
|
||
|
|
|
||
|
|
/* synchronized access to registers in SDIO clock domain */
|
||
|
|
u32 sdioaccess; /* 0x050, rev8 */
|
||
|
|
u32 PAD[3];
|
||
|
|
|
||
|
|
/* PCMCIA frame control */
|
||
|
|
u8 pcmciaframectrl; /* 0x060, rev8 */
|
||
|
|
u8 PAD[3];
|
||
|
|
u8 pcmciawatermark; /* rev8 */
|
||
|
|
u8 PAD[155];
|
||
|
|
|
||
|
|
/* interrupt batching control */
|
||
|
|
u32 intrcvlazy; /* 0x100, rev8 */
|
||
|
|
u32 PAD[3];
|
||
|
|
|
||
|
|
/* counters */
|
||
|
|
u32 cmd52rd; /* 0x110, rev8 */
|
||
|
|
u32 cmd52wr; /* rev8 */
|
||
|
|
u32 cmd53rd; /* rev8 */
|
||
|
|
u32 cmd53wr; /* rev8 */
|
||
|
|
u32 abort; /* rev8 */
|
||
|
|
u32 datacrcerror; /* rev8 */
|
||
|
|
u32 rdoutofsync; /* rev8 */
|
||
|
|
u32 wroutofsync; /* rev8 */
|
||
|
|
u32 writebusy; /* rev8 */
|
||
|
|
u32 readwait; /* rev8 */
|
||
|
|
u32 readterm; /* rev8 */
|
||
|
|
u32 writeterm; /* rev8 */
|
||
|
|
u32 PAD[40];
|
||
|
|
u32 clockctlstatus; /* rev8 */
|
||
|
|
u32 PAD[7];
|
||
|
|
|
||
|
|
u32 PAD[128]; /* DMA engines */
|
||
|
|
|
||
|
|
/* SDIO/PCMCIA CIS region */
|
||
|
|
char cis[512]; /* 0x400-0x5ff, rev6 */
|
||
|
|
|
||
|
|
/* PCMCIA function control registers */
|
||
|
|
char pcmciafcr[256]; /* 0x600-6ff, rev6 */
|
||
|
|
u16 PAD[55];
|
||
|
|
|
||
|
|
/* PCMCIA backplane access */
|
||
|
|
u16 backplanecsr; /* 0x76E, rev6 */
|
||
|
|
u16 backplaneaddr0; /* rev6 */
|
||
|
|
u16 backplaneaddr1; /* rev6 */
|
||
|
|
u16 backplaneaddr2; /* rev6 */
|
||
|
|
u16 backplaneaddr3; /* rev6 */
|
||
|
|
u16 backplanedata0; /* rev6 */
|
||
|
|
u16 backplanedata1; /* rev6 */
|
||
|
|
u16 backplanedata2; /* rev6 */
|
||
|
|
u16 backplanedata3; /* rev6 */
|
||
|
|
u16 PAD[31];
|
||
|
|
|
||
|
|
/* sprom "size" & "blank" info */
|
||
|
|
u16 spromstatus; /* 0x7BE, rev2 */
|
||
|
|
u32 PAD[464];
|
||
|
|
|
||
|
|
u16 PAD[0x80];
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Register/deregister interrupt handler. */
|
||
|
|
int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
void brcmf_sdiod_intr_unregister(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
|
||
|
|
/* SDIO device register access interface */
|
||
|
|
/* Accessors for SDIO Function 0 */
|
||
|
|
#define brcmf_sdiod_func0_rb(sdiodev, addr, r) \
|
||
|
|
sdio_f0_readb((sdiodev)->func1, (addr), (r))
|
||
|
|
|
||
|
|
#define brcmf_sdiod_func0_wb(sdiodev, addr, v, ret) \
|
||
|
|
sdio_f0_writeb((sdiodev)->func1, (v), (addr), (ret))
|
||
|
|
|
||
|
|
/* Accessors for SDIO Function 1 */
|
||
|
|
#define brcmf_sdiod_readb(sdiodev, addr, r) \
|
||
|
|
sdio_readb((sdiodev)->func1, (addr), (r))
|
||
|
|
|
||
|
|
#define brcmf_sdiod_writeb(sdiodev, addr, v, ret) \
|
||
|
|
sdio_writeb((sdiodev)->func1, (v), (addr), (ret))
|
||
|
|
|
||
|
|
u32 brcmf_sdiod_readl(struct brcmf_sdio_dev *sdiodev, u32 addr, int *ret);
|
||
|
|
void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr, u32 data,
|
||
|
|
int *ret);
|
||
|
|
|
||
|
|
/* Buffer transfer to/from device (client) core via cmd53.
|
||
|
|
* fn: function number
|
||
|
|
* flags: backplane width, address increment, sync/async
|
||
|
|
* buf: pointer to memory data buffer
|
||
|
|
* nbytes: number of bytes to transfer to/from buf
|
||
|
|
* pkt: pointer to packet associated with buf (if any)
|
||
|
|
* complete: callback function for command completion (async only)
|
||
|
|
* handle: handle for completion callback (first arg in callback)
|
||
|
|
* Returns 0 or error code.
|
||
|
|
* NOTE: Async operation is not currently supported.
|
||
|
|
*/
|
||
|
|
int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
|
||
|
|
struct sk_buff_head *pktq);
|
||
|
|
int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
|
||
|
|
|
||
|
|
int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt);
|
||
|
|
int brcmf_sdiod_recv_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes);
|
||
|
|
int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
|
||
|
|
struct sk_buff_head *pktq, uint totlen);
|
||
|
|
|
||
|
|
/* Flags bits */
|
||
|
|
|
||
|
|
/* Four-byte target (backplane) width (vs. two-byte) */
|
||
|
|
#define SDIO_REQ_4BYTE 0x1
|
||
|
|
/* Fixed address (FIFO) (vs. incrementing address) */
|
||
|
|
#define SDIO_REQ_FIXED 0x2
|
||
|
|
|
||
|
|
/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
|
||
|
|
* rw: read or write (0/1)
|
||
|
|
* addr: direct SDIO address
|
||
|
|
* buf: pointer to memory data buffer
|
||
|
|
* nbytes: number of bytes to transfer to/from buf
|
||
|
|
* Returns 0 or error code.
|
||
|
|
*/
|
||
|
|
int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
|
||
|
|
u8 *data, uint size);
|
||
|
|
|
||
|
|
/* Issue an abort to the specified function */
|
||
|
|
int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func);
|
||
|
|
|
||
|
|
void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
|
||
|
|
enum brcmf_sdiod_state state);
|
||
|
|
#ifdef CONFIG_PM_SLEEP
|
||
|
|
bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
#else
|
||
|
|
static inline bool brcmf_sdiod_freezing(struct brcmf_sdio_dev *sdiodev)
|
||
|
|
{
|
||
|
|
return false;
|
||
|
|
}
|
||
|
|
static inline void brcmf_sdiod_try_freeze(struct brcmf_sdio_dev *sdiodev)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
static inline void brcmf_sdiod_freezer_count(struct brcmf_sdio_dev *sdiodev)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
static inline void brcmf_sdiod_freezer_uncount(struct brcmf_sdio_dev *sdiodev)
|
||
|
|
{
|
||
|
|
}
|
||
|
|
#endif /* CONFIG_PM_SLEEP */
|
||
|
|
|
||
|
|
struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
|
||
|
|
void brcmf_sdio_remove(struct brcmf_sdio *bus);
|
||
|
|
void brcmf_sdio_isr(struct brcmf_sdio *bus);
|
||
|
|
|
||
|
|
void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active);
|
||
|
|
void brcmf_sdio_wowl_config(struct device *dev, bool enabled);
|
||
|
|
int brcmf_sdio_sleep(struct brcmf_sdio *bus, bool sleep);
|
||
|
|
void brcmf_sdio_trigger_dpc(struct brcmf_sdio *bus);
|
||
|
|
|
||
|
|
#endif /* BRCMFMAC_SDIO_H */
|