591 lines
19 KiB
Plaintext
591 lines
19 KiB
Plaintext
|
===== General Properties =====
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/manufacturer
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the name of the device manufacturer.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented as string
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/model_name
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the name of the device model.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented as string
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/serial_number
|
||
|
|
Date: January 2008
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the serial number of the device.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented as string
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/type
|
||
|
|
Date: May 2010
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Describes the main type of the supply.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: "Battery", "UPS", "Mains", "USB"
|
||
|
|
|
||
|
|
===== Battery Properties =====
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/capacity
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Fine grain representation of battery capacity.
|
||
|
|
Access: Read
|
||
|
|
Valid values: 0 - 100 (percent)
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/capacity_alert_max
|
||
|
|
Date: July 2012
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Maximum battery capacity trip-wire value where the supply will
|
||
|
|
notify user-space of the event. This is normally used for the
|
||
|
|
battery discharging scenario where user-space needs to know the
|
||
|
|
battery has dropped to an upper level so it can take
|
||
|
|
appropriate action (e.g. warning user that battery level is
|
||
|
|
low).
|
||
|
|
|
||
|
|
Access: Read, Write
|
||
|
|
Valid values: 0 - 100 (percent)
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/capacity_alert_min
|
||
|
|
Date: July 2012
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Minimum battery capacity trip-wire value where the supply will
|
||
|
|
notify user-space of the event. This is normally used for the
|
||
|
|
battery discharging scenario where user-space needs to know the
|
||
|
|
battery has dropped to a lower level so it can take
|
||
|
|
appropriate action (e.g. warning user that battery level is
|
||
|
|
critically low).
|
||
|
|
|
||
|
|
Access: Read, Write
|
||
|
|
Valid values: 0 - 100 (percent)
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/capacity_level
|
||
|
|
Date: June 2009
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Coarse representation of battery capacity.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: "Unknown", "Critical", "Low", "Normal", "High",
|
||
|
|
"Full"
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/current_avg
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports an average IBAT current reading for the battery, over a
|
||
|
|
fixed period. Normally devices will provide a fixed interval in
|
||
|
|
which they average readings to smooth out the reported value.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/current_max
|
||
|
|
Date: October 2010
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the maximum IBAT current allowed into the battery.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/current_now
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports an instant, single IBAT current reading for the battery.
|
||
|
|
This value is not averaged/smoothed.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/charge_type
|
||
|
|
Date: July 2009
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Represents the type of charging currently being applied to the
|
||
|
|
battery.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: "Unknown", "N/A", "Trickle", "Fast"
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/charge_term_current
|
||
|
|
Date: July 2014
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the charging current value which is used to determine
|
||
|
|
when the battery is considered full and charging should end.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/health
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the health of the battery or battery side of charger
|
||
|
|
functionality.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: "Unknown", "Good", "Overheat", "Dead",
|
||
|
|
"Over voltage", "Unspecified failure", "Cold",
|
||
|
|
"Watchdog timer expire", "Safety timer expire",
|
||
|
|
"Over current", "Warm", "Cool", "Hot"
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/precharge_current
|
||
|
|
Date: June 2017
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the charging current applied during pre-charging phase
|
||
|
|
for a battery charge cycle.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/present
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports whether a battery is present or not in the system.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values:
|
||
|
|
0: Absent
|
||
|
|
1: Present
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/status
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Represents the charging status of the battery. Normally this
|
||
|
|
is read-only reporting although for some supplies this can be
|
||
|
|
used to enable/disable charging to the battery.
|
||
|
|
|
||
|
|
Access: Read, Write
|
||
|
|
Valid values: "Unknown", "Charging", "Discharging",
|
||
|
|
"Not charging", "Full"
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/technology
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Describes the battery technology supported by the supply.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe",
|
||
|
|
"NiCd", "LiMn"
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the current TBAT battery temperature reading.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_alert_max
|
||
|
|
Date: July 2012
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Maximum TBAT temperature trip-wire value where the supply will
|
||
|
|
notify user-space of the event. This is normally used for the
|
||
|
|
battery charging scenario where user-space needs to know the
|
||
|
|
battery temperature has crossed an upper threshold so it can
|
||
|
|
take appropriate action (e.g. warning user that battery level is
|
||
|
|
critically high, and charging has stopped).
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_alert_min
|
||
|
|
Date: July 2012
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Minimum TBAT temperature trip-wire value where the supply will
|
||
|
|
notify user-space of the event. This is normally used for the
|
||
|
|
battery charging scenario where user-space needs to know the
|
||
|
|
battery temperature has crossed a lower threshold so it can take
|
||
|
|
appropriate action (e.g. warning user that battery level is
|
||
|
|
high, and charging current has been reduced accordingly to
|
||
|
|
remedy the situation).
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_max
|
||
|
|
Date: July 2014
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the maximum allowed TBAT battery temperature for
|
||
|
|
charging.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_min
|
||
|
|
Date: July 2014
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the minimum allowed TBAT battery temperature for
|
||
|
|
charging.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/voltage_avg,
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports an average VBAT voltage reading for the battery, over a
|
||
|
|
fixed period. Normally devices will provide a fixed interval in
|
||
|
|
which they average readings to smooth out the reported value.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microvolts
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/voltage_max,
|
||
|
|
Date: January 2008
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the maximum safe VBAT voltage permitted for the battery,
|
||
|
|
during charging.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microvolts
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/voltage_min,
|
||
|
|
Date: January 2008
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the minimum safe VBAT voltage permitted for the battery,
|
||
|
|
during discharging.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microvolts
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/voltage_now,
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports an instant, single VBAT voltage reading for the battery.
|
||
|
|
This value is not averaged/smoothed.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microvolts
|
||
|
|
|
||
|
|
===== USB Properties =====
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/current_avg
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports an average IBUS current reading over a fixed period.
|
||
|
|
Normally devices will provide a fixed interval in which they
|
||
|
|
average readings to smooth out the reported value.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/current_max
|
||
|
|
Date: October 2010
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the maximum IBUS current the supply can support.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/current_now
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the IBUS current supplied now. This value is generally
|
||
|
|
read-only reporting, unless the 'online' state of the supply
|
||
|
|
is set to be programmable, in which case this value can be set
|
||
|
|
within the reported min/max range.
|
||
|
|
|
||
|
|
Access: Read, Write
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/input_current_limit
|
||
|
|
Date: July 2014
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Details the incoming IBUS current limit currently set in the
|
||
|
|
supply. Normally this is configured based on the type of
|
||
|
|
connection made (e.g. A configured SDP should output a maximum
|
||
|
|
of 500mA so the input current limit is set to the same value).
|
||
|
|
|
||
|
|
Access: Read, Write
|
||
|
|
Valid values: Represented in microamps
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/online,
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Indicates if VBUS is present for the supply. When the supply is
|
||
|
|
online, and the supply allows it, then it's possible to switch
|
||
|
|
between online states (e.g. Fixed -> Programmable for a PD_PPS
|
||
|
|
USB supply so voltage and current can be controlled).
|
||
|
|
|
||
|
|
Access: Read, Write
|
||
|
|
Valid values:
|
||
|
|
0: Offline
|
||
|
|
1: Online Fixed - Fixed Voltage Supply
|
||
|
|
2: Online Programmable - Programmable Voltage Supply
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the current supply temperature reading. This would
|
||
|
|
normally be the internal temperature of the device itself (e.g
|
||
|
|
TJUNC temperature of an IC)
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_alert_max
|
||
|
|
Date: July 2012
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Maximum supply temperature trip-wire value where the supply will
|
||
|
|
notify user-space of the event. This is normally used for the
|
||
|
|
charging scenario where user-space needs to know the supply
|
||
|
|
temperature has crossed an upper threshold so it can take
|
||
|
|
appropriate action (e.g. warning user that the supply
|
||
|
|
temperature is critically high, and charging has stopped to
|
||
|
|
remedy the situation).
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_alert_min
|
||
|
|
Date: July 2012
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Minimum supply temperature trip-wire value where the supply will
|
||
|
|
notify user-space of the event. This is normally used for the
|
||
|
|
charging scenario where user-space needs to know the supply
|
||
|
|
temperature has crossed a lower threshold so it can take
|
||
|
|
appropriate action (e.g. warning user that the supply
|
||
|
|
temperature is high, and charging current has been reduced
|
||
|
|
accordingly to remedy the situation).
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_max
|
||
|
|
Date: July 2014
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the maximum allowed supply temperature for operation.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/temp_min
|
||
|
|
Date: July 2014
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the mainimum allowed supply temperature for operation.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in 1/10 Degrees Celsius
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/usb_type
|
||
|
|
Date: March 2018
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports what type of USB connection is currently active for
|
||
|
|
the supply, for example it can show if USB-PD capable source
|
||
|
|
is attached.
|
||
|
|
|
||
|
|
Access: Read-Only
|
||
|
|
Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD",
|
||
|
|
"PD_DRP", "PD_PPS", "BrickID"
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/voltage_max
|
||
|
|
Date: January 2008
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the maximum VBUS voltage the supply can support.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microvolts
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/voltage_min
|
||
|
|
Date: January 2008
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the minimum VBUS voltage the supply can support.
|
||
|
|
|
||
|
|
Access: Read
|
||
|
|
Valid values: Represented in microvolts
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/<supply_name>/voltage_now
|
||
|
|
Date: May 2007
|
||
|
|
Contact: linux-pm@vger.kernel.org
|
||
|
|
Description:
|
||
|
|
Reports the VBUS voltage supplied now. This value is generally
|
||
|
|
read-only reporting, unless the 'online' state of the supply
|
||
|
|
is set to be programmable, in which case this value can be set
|
||
|
|
within the reported min/max range.
|
||
|
|
|
||
|
|
Access: Read, Write
|
||
|
|
Valid values: Represented in microvolts
|
||
|
|
|
||
|
|
===== Device Specific Properties =====
|
||
|
|
|
||
|
|
What: /sys/class/power/ds2760-battery.*/charge_now
|
||
|
|
Date: May 2010
|
||
|
|
KernelVersion: 2.6.35
|
||
|
|
Contact: Daniel Mack <daniel@caiaq.de>
|
||
|
|
Description:
|
||
|
|
This file is writeable and can be used to set the current
|
||
|
|
coloumb counter value inside the battery monitor chip. This
|
||
|
|
is needed for unavoidable corrections of aging batteries.
|
||
|
|
A userspace daemon can monitor the battery charging logic
|
||
|
|
and once the counter drops out of considerable bounds, take
|
||
|
|
appropriate action.
|
||
|
|
|
||
|
|
What: /sys/class/power/ds2760-battery.*/charge_full
|
||
|
|
Date: May 2010
|
||
|
|
KernelVersion: 2.6.35
|
||
|
|
Contact: Daniel Mack <daniel@caiaq.de>
|
||
|
|
Description:
|
||
|
|
This file is writeable and can be used to set the assumed
|
||
|
|
battery 'full level'. As batteries age, this value has to be
|
||
|
|
amended over time.
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer
|
||
|
|
Date: October 2014
|
||
|
|
KernelVersion: 3.18.0
|
||
|
|
Contact: Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
Description:
|
||
|
|
This entry shows and sets the maximum time the max14577
|
||
|
|
charger operates in fast-charge mode. When the timer expires
|
||
|
|
the device will terminate fast-charge mode (charging current
|
||
|
|
will drop to 0 A) and will trigger interrupt.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 5, 6 or 7 (hours),
|
||
|
|
- 0: disabled.
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer
|
||
|
|
Date: January 2015
|
||
|
|
KernelVersion: 3.19.0
|
||
|
|
Contact: Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
Description:
|
||
|
|
This entry shows and sets the maximum time the max77693
|
||
|
|
charger operates in fast-charge mode. When the timer expires
|
||
|
|
the device will terminate fast-charge mode (charging current
|
||
|
|
will drop to 0 A) and will trigger interrupt.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 4 - 16 (hours), step by 2 (rounded down)
|
||
|
|
- 0: disabled.
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current
|
||
|
|
Date: January 2015
|
||
|
|
KernelVersion: 3.19.0
|
||
|
|
Contact: Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
Description:
|
||
|
|
This entry shows and sets the charging current threshold for
|
||
|
|
entering top-off charging mode. When charging current in fast
|
||
|
|
charge mode drops below this value, the charger will trigger
|
||
|
|
interrupt and start top-off charging mode.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 100000 - 200000 (microamps), step by 25000 (rounded down)
|
||
|
|
- 200000 - 350000 (microamps), step by 50000 (rounded down)
|
||
|
|
- 0: disabled.
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/max77693-charger/device/top_off_timer
|
||
|
|
Date: January 2015
|
||
|
|
KernelVersion: 3.19.0
|
||
|
|
Contact: Krzysztof Kozlowski <krzk@kernel.org>
|
||
|
|
Description:
|
||
|
|
This entry shows and sets the maximum time the max77693
|
||
|
|
charger operates in top-off charge mode. When the timer expires
|
||
|
|
the device will terminate top-off charge mode (charging current
|
||
|
|
will drop to 0 A) and will trigger interrupt.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 0 - 70 (minutes), step by 10 (rounded down)
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/bq24257-charger/ovp_voltage
|
||
|
|
Date: October 2015
|
||
|
|
KernelVersion: 4.4.0
|
||
|
|
Contact: Andreas Dannenberg <dannenberg@ti.com>
|
||
|
|
Description:
|
||
|
|
This entry configures the overvoltage protection feature of bq24257-
|
||
|
|
type charger devices. This feature protects the device and other
|
||
|
|
components against damage from overvoltage on the input supply. See
|
||
|
|
device datasheet for details.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
|
||
|
|
10500000 (all uV)
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage
|
||
|
|
Date: October 2015
|
||
|
|
KernelVersion: 4.4.0
|
||
|
|
Contact: Andreas Dannenberg <dannenberg@ti.com>
|
||
|
|
Description:
|
||
|
|
This entry configures the input dynamic power path management voltage of
|
||
|
|
bq24257-type charger devices. Once the supply drops to the configured
|
||
|
|
voltage, the input current limit is reduced down to prevent the further
|
||
|
|
drop of the supply. When the IC enters this mode, the charge current is
|
||
|
|
lower than the set value. See device datasheet for details.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
|
||
|
|
4760000 (all uV)
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/bq24257-charger/high_impedance_enable
|
||
|
|
Date: October 2015
|
||
|
|
KernelVersion: 4.4.0
|
||
|
|
Contact: Andreas Dannenberg <dannenberg@ti.com>
|
||
|
|
Description:
|
||
|
|
This entry allows enabling the high-impedance mode of bq24257-type
|
||
|
|
charger devices. If enabled, it places the charger IC into low power
|
||
|
|
standby mode with the switch mode controller disabled. When disabled,
|
||
|
|
the charger operates normally. See device datasheet for details.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 1: enabled
|
||
|
|
- 0: disabled
|
||
|
|
|
||
|
|
What: /sys/class/power_supply/bq24257-charger/sysoff_enable
|
||
|
|
Date: October 2015
|
||
|
|
KernelVersion: 4.4.0
|
||
|
|
Contact: Andreas Dannenberg <dannenberg@ti.com>
|
||
|
|
Description:
|
||
|
|
This entry allows enabling the sysoff mode of bq24257-type charger
|
||
|
|
devices. If enabled and the input is removed, the internal battery FET
|
||
|
|
is turned off in order to reduce the leakage from the BAT pin to less
|
||
|
|
than 1uA. Note that on some devices/systems this disconnects the battery
|
||
|
|
from the system. See device datasheet for details.
|
||
|
|
|
||
|
|
Valid values:
|
||
|
|
- 1: enabled
|
||
|
|
- 0: disabled
|