kernel_samsung_a34x-permissive/drivers/input/touchscreen/ILITEK9882/ilitek_v3_ic.c

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * Copyright (C) 2019 MediaTek Inc.
 */

#include "ilitek_v3.h"

#define PROTOCL_VER_NUM		8
static struct ilitek_protocol_info protocol_info[PROTOCL_VER_NUM] = {
	/* length -> fw, protocol, tp, key, panel, core, func, window, cdc, mp_info */
	[0] = {PROTOCOL_VER_500, 4, 4, 14, 30, 5, 5, 2, 8, 3, 8},
	[1] = {PROTOCOL_VER_510, 4, 3, 14, 30, 5, 5, 3, 8, 3, 8},
	[2] = {PROTOCOL_VER_520, 4, 4, 14, 30, 5, 5, 3, 8, 3, 8},
	[3] = {PROTOCOL_VER_530, 9, 4, 14, 30, 5, 5, 3, 8, 3, 8},
	[4] = {PROTOCOL_VER_540, 9, 4, 14, 30, 5, 5, 3, 8, 15, 8},
	[5] = {PROTOCOL_VER_550, 9, 4, 14, 30, 5, 5, 3, 8, 15, 14},
	[6] = {PROTOCOL_VER_560, 9, 4, 14, 30, 5, 5, 3, 8, 15, 14},
	[7] = {PROTOCOL_VER_570, 9, 4, 14, 30, 5, 5, 3, 8, 15, 14},
};

#define FUNC_CTRL_NUM	17
static struct ilitek_ic_func_ctrl func_ctrl[FUNC_CTRL_NUM] = {
	/* cmd[3] = cmd, func, ctrl */
	// rec_state 0:disable, 1: enable, 2: ignore record
	[0] = {"sense", {0x1, 0x1, 0x0}, 3, 0x0, 2, 0xFF},
	[1] = {"sleep", {0x1, 0x2, 0x0}, 3, 0x0, 2, 0xFF},
	[2] = {"glove", {0x1, 0x6, 0x0}, 3, 0x0, 0, 0xFF},
	[3] = {"stylus", {0x1, 0x7, 0x0}, 3, 0x0, 0, 0xFF},
	[4] = {"lpwg", {0x1, 0xA, 0x0}, 3, 0x0, 2, 0xFF},
	[5] = {"proximity", {0x1, 0x10, 0x0}, 3, 0x0, 2, 0xFF},
	[6] = {"plug", {0x1, 0x11, 0x0}, 3, 0x1, 0, 0xFF},
	[7] = {"edge_palm", {0x1, 0x12, 0x0}, 3, 0x1, 0, 0xFF},
	[8] = {"lock_point", {0x1, 0x13, 0x0}, 3, 0x0, 0, 0xFF},
	[9] = {"active", {0x1, 0x14, 0x0}, 3, 0x0, 2, 0xFF},
	[10] = {"idle", {0x1, 0x19, 0x0}, 3, 0x1, 0, 0xFF},
	[11] = {"gesture_demo_en", {0x1, 0x16, 0x0}, 3, 0x0, 0, 0xFF},
	[12] = {"tp_recore", {0x1, 0x18, 0x0}, 3, 0x0, 2, 0xFF},
	[13] = {"knock_en", {0x1, 0xA, 0x8, 0x03, 0x0, 0x0}, 6, 0xFF, 0, 0xFF},
	[14] = {"int_trigger", {0x1, 0x1B, 0x0}, 3, 0x0, 2, 0xFF},
	[15] = {"ear_phone", {0x1, 0x17, 0x0}, 3, 0x0, 0, 0xFF},
	[15] = {"knuckle", {0x1, 0xF, 0x0}, 3, 0x0, 0, 0xFF},
};

#define CHIP_SUP_NUM	5
static u32 ic_sup_list[CHIP_SUP_NUM] = {
	[0] = ILI9881_CHIP,
	[1] = ILI7807_CHIP,
	[2] = ILI9881N_AA,
	[3] = ILI9881O_AA,
	[4] = ILI9882_CHIP
};

#ifdef ROI
int ili_config_knuckle_roi_ctrl(cmd_types cmd)
{
	int ret = 0;
	switch (cmd) {
	case CMD_DISABLE:
		ILI_DBG("knuckle roi disbale\n");
		ret = ili_ic_func_ctrl("knuckle", cmd);
		break;
	case CMD_ENABLE:
		ILI_DBG("knuckle roi enable\n");
		ret = ili_ic_func_ctrl("knuckle", cmd);
		break;
	case CMD_STATUS:
		ILI_DBG("knuckle roi read status\n");
		ret = ili_ic_func_ctrl("knuckle", cmd);
		break;
	case CMD_ROI_DATA:
		ILI_DBG("knuckle roi read data\n");
		ret = ili_ic_func_ctrl("knuckle", cmd);
		break;
	default:
		ILI_ERR("knuckle roi unknown cmd: %d\n", cmd);
		return -EINVAL;
	}
	return ret;
}

int ili_config_get_knuckle_roi_status(void)
{
	int ret = 0;
	u8 roi_status = 0;

	ret = ili_config_knuckle_roi_ctrl(CMD_STATUS);
	if (ret) {
		ILI_ERR("config to read roi status failed\n");
		return ret;
	}

	msleep(1);
	ret = ilits->wrapper(NULL, 0, &roi_status, sizeof(roi_status), OFF, OFF);
	if (ret) {
		ILI_ERR("read data failed\n");
		return ret;
	}

	ILI_INFO("roi %s\n", roi_status ? "enable" : "disable");

	return roi_status;
}
#endif

static int ilitek_tddi_ic_check_support(u32 pid, u16 id)
{
	int i = 0;

	for (i = 0; i < CHIP_SUP_NUM; i++) {
		if ((pid == ic_sup_list[i]) || (id == ic_sup_list[i]))
			break;
	}

	if (i >= CHIP_SUP_NUM) {
		ILI_INFO("ERROR, ILITEK CHIP(0x%x) Not found !!\n", pid);
	}

	ILI_INFO("ILITEK CHIP found.\n");

	ilits->chip->pid = pid;

	ilits->chip->reset_key = 0x00019878;
	ilits->chip->wtd_key = 0x9881;

	if (((pid & 0xFFFFFF00) == ILI9881N_AA) || ((pid & 0xFFFFFF00) == ILI9881O_AA)) {
		ilits->chip->dma_reset = ENABLE;
	} else {
		ilits->chip->dma_reset = DISABLE;
	}

	ilits->chip->no_bk_shift = RAWDATA_NO_BK_SHIFT;
	ilits->chip->max_count = 0x1FFFF;
	return 0;
}

int ili_ice_mode_bit_mask_write(u32 addr, u32 mask, u32 value)
{
	int ret = 0;
	u32 data = 0;

	if (ili_ice_mode_read(addr, &data, sizeof(u32)) < 0) {
		ILI_ERR("Read data error\n");
		return -1;
	}

	data &= (~mask);
	data |= (value & mask);

	ILI_DBG("mask value data = %x\n", data);

	ret = ili_ice_mode_write(addr, data, sizeof(u32));
	if (ret < 0)
		ILI_ERR("Failed to re-write data in ICE mode, ret = %d\n", ret);

	return ret;
}

int ili_ice_mode_write(u32 addr, u32 data, int len)
{
	int ret = 0, i;
	u8 txbuf[64] = {0};

	if (!atomic_read(&ilits->ice_stat)) {
		ILI_ERR("ice mode not enabled\n");
		return -1;
	}

	txbuf[0] = 0x25;
	txbuf[1] = (char)((addr & 0x000000FF) >> 0);
	txbuf[2] = (char)((addr & 0x0000FF00) >> 8);
	txbuf[3] = (char)((addr & 0x00FF0000) >> 16);

	for (i = 0; i < len; i++)
		txbuf[i + 4] = (char)(data >> (8 * i));

	ret = ilits->wrapper(txbuf, len + 4, NULL, 0, OFF, OFF);
	if (ret < 0)
		ILI_ERR("Failed to write data in ice mode, ret = %d\n", ret);

	return ret;
}

int ili_ice_mode_read(u32 addr, u32 *data, int len)
{
	int ret = 0;
	u8 *rxbuf = NULL;
	u8 txbuf[4] = {0};

	if (!atomic_read(&ilits->ice_stat)) {
		ILI_ERR("ice mode not enabled\n");
		return -1;
	}

	txbuf[0] = 0x25;
	txbuf[1] = (char)((addr & 0x000000FF) >> 0);
	txbuf[2] = (char)((addr & 0x0000FF00) >> 8);
	txbuf[3] = (char)((addr & 0x00FF0000) >> 16);

	ret = ilits->wrapper(txbuf, sizeof(txbuf), NULL, 0, OFF, OFF);
	if (ret < 0)
		goto out;

	rxbuf = kcalloc(len, sizeof(u8), GFP_KERNEL);
	if (ERR_ALLOC_MEM(rxbuf)) {
		ILI_ERR("Failed to allocate rxbuf, %ld\n", PTR_ERR(rxbuf));
		ret = -ENOMEM;
		goto out;
	}

	ret = ilits->wrapper(NULL, 0, rxbuf, len, OFF, OFF);
	if (ret < 0)
		goto out;

	if (len == sizeof(u8))
		*data = rxbuf[0];
	else
		*data = (rxbuf[0] | rxbuf[1] << 8 | rxbuf[2] << 16 | rxbuf[3] << 24);

out:
	if (ret < 0)
		ILI_ERR("Failed to read data in ice mode, ret = %d\n", ret);

	ipio_kfree((void **)&rxbuf);
	return ret;
}

int ili_ice_mode_ctrl(bool enable, bool mcu)
{
	int ret = 0;
	u8 cmd_open[4] = {0x25, 0x62, 0x10, 0x18};
	u8 cmd_close[4] = {0x1B, 0x62, 0x10, 0x18};

	ILI_INFO("%s ICE mode, mcu on = %d\n", (enable ? "Enable" : "Disable"), mcu);

	if (enable) {
		if (atomic_read(&ilits->ice_stat)) {
			ILI_INFO("ice mode already enabled\n");
			return 0;
		}

		if (mcu)
			cmd_open[0] = 0x1F;

		atomic_set(&ilits->ice_stat, ENABLE);

		if (ilits->wrapper(cmd_open, sizeof(cmd_open), NULL, 0, OFF, OFF) < 0) {
			ILI_ERR("write ice mode cmd error\n");
			atomic_set(&ilits->ice_stat, DISABLE);
		}
		ilits->pll_clk_wakeup = false;

#if (TDDI_INTERFACE == BUS_I2C)
		if (ili_ice_mode_write(FLASH_BASED_ADDR, 0x1, 1) < 0)
			ILI_ERR("Write cs high failed\n"); /* CS high */
#endif
	} else {
		if (!atomic_read(&ilits->ice_stat)) {
			ILI_INFO("ice mode already disabled\n");
			return 0;
		}

		ret = ilits->wrapper(cmd_close, sizeof(cmd_close), NULL, 0, OFF, OFF);
		if (ret < 0) {
			ILI_ERR("Exit to ICE Mode failed !!\n");
			atomic_set(&ilits->ice_stat, ENABLE);
		} else {
			atomic_set(&ilits->ice_stat, DISABLE);
			ilits->pll_clk_wakeup = true;
		}
	}

	return ret;
}

void ili_ic_edge_palm_para_init(void)
{
#if ENABLE_EDGE_PALM_PARA
	int i;

	ilits->edge_palm_para[0] = P5_X_EDGE_PLAM_CTRL_1;
	ilits->edge_palm_para[1] = P5_X_EDGE_PALM_TUNING_PARA;
	ilits->edge_palm_para[2] = (ZONE_A_W & 0xFF00) >> 8;
	ilits->edge_palm_para[3] = ZONE_A_W & 0xFF;
	ilits->edge_palm_para[4] = (ZONE_B_W & 0xFF00) >> 8;
	ilits->edge_palm_para[5] = ZONE_B_W & 0xFF;
	ilits->edge_palm_para[6] = (ZONE_A_ROTATION_W & 0xFF00) >> 8;
	ilits->edge_palm_para[7] = ZONE_A_ROTATION_W & 0xFF;
	ilits->edge_palm_para[8] = (ZONE_B_ROTATION_W & 0xFF00) >> 8;
	ilits->edge_palm_para[9] = ZONE_B_ROTATION_W & 0xFF;
	ilits->edge_palm_para[10] = (ZONE_C_WIDTH & 0xFF00) >> 8;
	ilits->edge_palm_para[11] = ZONE_C_WIDTH & 0xFF;
	ilits->edge_palm_para[12] = (ZONE_C_HEIGHT & 0xFF00) >> 8;
	ilits->edge_palm_para[13] = ZONE_C_HEIGHT & 0xFF;
	ilits->edge_palm_para[14] = (ZONE_C_HEIGHT_LITTLE & 0xFF00) >> 8;
	ilits->edge_palm_para[15] = ZONE_C_HEIGHT_LITTLE & 0xFF;
	ilits->edge_palm_para[16] = (ZONE_A_W & 0xFF00) >> 8;
	ilits->edge_palm_para[17] = ZONE_A_W & 0xFF;
	ilits->edge_palm_para[18] = (ZONE_B_W & 0xFF00) >> 8;
	ilits->edge_palm_para[19] = ZONE_B_W & 0xFF;
	ilits->edge_palm_para[20] = (ZONE_A_ROTATION_W & 0xFF00) >> 8;
	ilits->edge_palm_para[21] = ZONE_A_ROTATION_W & 0xFF;
	ilits->edge_palm_para[22] = (ZONE_B_ROTATION_W & 0xFF00) >> 8;
	ilits->edge_palm_para[23] = ZONE_B_ROTATION_W & 0xFF;
	ilits->edge_palm_para[24] = (ZONE_C_WIDTH & 0xFF00) >> 8;
	ilits->edge_palm_para[25] = ZONE_C_WIDTH & 0xFF;
	ilits->edge_palm_para[26] = (ZONE_C_HEIGHT & 0xFF00) >> 8;
	ilits->edge_palm_para[27] = ZONE_C_HEIGHT & 0xFF;
	ilits->edge_palm_para[28] = (ZONE_C_HEIGHT_LITTLE & 0xFF00) >> 8;
	ilits->edge_palm_para[29] = ZONE_C_HEIGHT_LITTLE & 0xFF;
	ilits->edge_palm_para[30] = ili_calc_packet_checksum(ilits->edge_palm_para, P5_X_EDGE_PALM_PARA_LENGTH - 1);

	for (i = 0; i < P5_X_EDGE_PALM_PARA_LENGTH; i++) {
		ILI_DBG("edge_palm_para[%d] = 0x%2x\n", i, ilits->edge_palm_para[i]);
	}
#endif
}
void ili_ic_send_edge_palm_para(void)
{
#if ENABLE_EDGE_PALM_PARA
	int ret = 0;

	ILI_INFO("send edge palm para\n");

	ret = ilits->wrapper(ilits->edge_palm_para, P5_X_EDGE_PALM_PARA_LENGTH, NULL, 0, OFF, OFF);
	if (ret < 0)
		ILI_ERR("Write edge palm para function failed\n");
#endif
}

int ili_ic_func_ctrl(const char *name, int ctrl)
{
	int i = 0, ret;

	for (i = 0; i < FUNC_CTRL_NUM; i++) {
		if (ipio_strcmp(name, func_ctrl[i].name) == 0) {
			if (strlen(name) != strlen(func_ctrl[i].name))
				continue;
			break;
		}
	}

	if (i >= FUNC_CTRL_NUM) {
		ILI_ERR("Not found function ctrl, %s\n", name);
		ret = -1;
		goto out;
	}

	if (ilits->protocol->ver == PROTOCOL_VER_500) {
		ILI_ERR("Non support function ctrl with protocol v5.0\n");
		ret = -1;
		goto out;
	}

	if (ilits->protocol->ver >= PROTOCOL_VER_560) {
		if (ipio_strcmp(func_ctrl[i].name, "gesture") == 0 ||
			ipio_strcmp(func_ctrl[i].name, "phone_cover_window") == 0) {
			ILI_INFO("Non support %s function ctrl\n", func_ctrl[i].name);
			ret = -1;
			goto out;
		}
	}

	func_ctrl[i].cmd[2] = ctrl;

	ILI_INFO("func = %s, len = %d, cmd = 0x%x, 0%x, 0x%x\n", func_ctrl[i].name, func_ctrl[i].len,
		func_ctrl[i].cmd[0], func_ctrl[i].cmd[1], func_ctrl[i].cmd[2]);

	ret = ilits->wrapper(func_ctrl[i].cmd, func_ctrl[i].len, NULL, 0, OFF, OFF);
	if (ret < 0)
		ILI_ERR("Write TP function failed\n");

	if (func_ctrl[i].rec_state < 2) {
		if (ctrl == func_ctrl[i].def_cmd)
			func_ctrl[i].rec_state = DISABLE;
		else
			func_ctrl[i].rec_state = ENABLE;

		func_ctrl[i].rec_cmd = ctrl;
	}

	ILI_DBG("record %s func cmd %d, rec_state %d\n", func_ctrl[i].name, func_ctrl[i].rec_cmd, func_ctrl[i].rec_state);
out:
	return ret;
}

void ili_ic_func_ctrl_reset(void)
{
	int i = 0;

	ili_ic_send_edge_palm_para();

	for (i = 0; i < FUNC_CTRL_NUM; i++) {
		if (func_ctrl[i].rec_state == ENABLE) {
			ILI_DBG("reset func ctrl %s, record status = %d, cmd = %d\n", func_ctrl[i].name,
				func_ctrl[i].rec_state, func_ctrl[i].rec_cmd);
			if (ili_ic_func_ctrl(func_ctrl[i].name, func_ctrl[i].rec_cmd) < 0)
				ILI_ERR("reset ic func ctrl %s failed\n", func_ctrl[i].name);
		}
	}
}

int ili_ic_code_reset(bool mcu)
{
	int ret;
	bool ice = atomic_read(&ilits->ice_stat);

	if (!ice)
		if (ili_ice_mode_ctrl(ENABLE, mcu) < 0)
			ILI_ERR("Enable ice mode failed before code reset\n");

	ret = ili_ice_mode_write(0x40040, 0xAE, 1);
	if (ret < 0)
		ILI_ERR("ic code reset failed\n");

	if (!ice)
		if (ili_ice_mode_ctrl(DISABLE, mcu) < 0)
			ILI_ERR("Enable ice mode failed after code reset\n");
	return ret;
}

int ili_ic_whole_reset(bool mcu)
{
	int ret = 0;
	bool ice = atomic_read(&ilits->ice_stat);

	if (!ice)
		if (ili_ice_mode_ctrl(ENABLE, mcu) < 0)
			ILI_ERR("Enable ice mode failed before chip reset\n");

	ILI_INFO("ic whole reset key = 0x%x, edge_delay = %d\n",
		ilits->chip->reset_key, ilits->rst_edge_delay);

	ret = ili_ice_mode_write(ilits->chip->reset_addr, ilits->chip->reset_key, sizeof(u32));
	if (ret < 0) {
		ILI_ERR("ic whole reset failed\n");
		goto out;
	}

	/* Need accurate power sequence, do not change it to msleep */
	mdelay(ilits->rst_edge_delay);

out:
	if (!ice)
		if (ili_ice_mode_ctrl(DISABLE, OFF) < 0)
			ILI_ERR("Enable ice mode failed after chip reset\n");

	return ret;
}

static void ilitek_tddi_ic_wr_pack(int packet)
{
	int retry = 100;
	u32 reg_data = 0;

	while (retry--) {
		if (ili_ice_mode_read(0x73010, &reg_data, sizeof(u8)) < 0)
			ILI_ERR("Read 0x73010 error\n");

		if ((reg_data & 0x02) == 0) {
			ILI_INFO("check ok 0x73010 read 0x%X retry = %d\n", reg_data, retry);
			break;
		}
		mdelay(10);
	}

	if (retry <= 0)
		ILI_INFO("check 0x73010 error read 0x%X\n", reg_data);

	if (ili_ice_mode_write(0x73000, packet, 4) < 0)
		ILI_ERR("Write %x at 0x73000\n", packet);
}

static u32 ilitek_tddi_ic_rd_pack(int packet)
{
	int retry = 100;
	u32 reg_data = 0;

	ilitek_tddi_ic_wr_pack(packet);

	while (retry--) {
		if (ili_ice_mode_read(0x4800A, &reg_data, sizeof(u8)) < 0)
			ILI_ERR("Read 0x4800A error\n");

		if ((reg_data & 0x02) == 0x02) {
			ILI_INFO("check  ok 0x4800A read 0x%X retry = %d\n", reg_data, retry);
			break;
		}
		mdelay(10);
	}
	if (retry <= 0)
		ILI_INFO("check 0x4800A error read 0x%X\n", reg_data);

	if (ili_ice_mode_write(0x4800A, 0x02, 1) < 0)
		ILI_ERR("Write 0x2 at 0x4800A\n");

	if (ili_ice_mode_read(0x73016, &reg_data, sizeof(u8)) < 0)
		ILI_ERR("Read 0x73016 error\n");

	return reg_data;
}

void ili_ic_set_ddi_reg_onepage(u8 page, u8 reg, u8 data, bool mcu)
{
	u32 setpage = 0x1FFFFF00 | page;
	u32 setreg = 0x1F000100 | (reg << 16) | data;
	bool ice = atomic_read(&ilits->ice_stat);

	ILI_INFO("setpage =  0x%X setreg = 0x%X\n", setpage, setreg);

	if (!ice)
		if (ili_ice_mode_ctrl(ENABLE, mcu) < 0)
			ILI_ERR("Enable ice mode failed before writing ddi reg\n");

	/*TDI_WR_KEY*/
	ilitek_tddi_ic_wr_pack(0x1FFF9527);
	/*Switch to Page*/
	ilitek_tddi_ic_wr_pack(setpage);
	/* Page*/
	ilitek_tddi_ic_wr_pack(setreg);
	/*TDI_WR_KEY OFF*/
	ilitek_tddi_ic_wr_pack(0x1FFF9500);

	if (!ice)
		if (ili_ice_mode_ctrl(DISABLE, mcu) < 0)
			ILI_ERR("Disable ice mode failed after writing ddi reg\n");
}

void ili_ic_get_ddi_reg_onepage(u8 page, u8 reg, u8 *data, bool mcu)
{
	u32 setpage = 0x1FFFFF00 | page;
	u32 setreg = 0x2F000100 | (reg << 16);
	bool ice = atomic_read(&ilits->ice_stat);

	ILI_INFO("setpage = 0x%X setreg = 0x%X\n", setpage, setreg);

	if (!ice)
		if (ili_ice_mode_ctrl(ENABLE, mcu) < 0)
			ILI_ERR("Enable ice mode failed before reading ddi reg\n");

	/*TDI_WR_KEY*/
	ilitek_tddi_ic_wr_pack(0x1FFF9527);
	/*Set Read Page reg*/
	ilitek_tddi_ic_wr_pack(setpage);

	/*TDI_RD_KEY*/
	ilitek_tddi_ic_wr_pack(0x1FFF9487);
	/*( *( __IO uint8 *)	(0x4800A) ) =0x2*/
	if (ili_ice_mode_write(0x4800A, 0x02, 1) < 0)
		ILI_ERR("Write 0x2 at 0x4800A\n");

	*data = ilitek_tddi_ic_rd_pack(setreg);
	ILI_INFO("check page = 0x%X, reg = 0x%X, read 0x%X\n", page, reg, *data);

	/*TDI_RD_KEY OFF*/
	ilitek_tddi_ic_wr_pack(0x1FFF9400);
	/*TDI_WR_KEY OFF*/
	ilitek_tddi_ic_wr_pack(0x1FFF9500);

	if (!ice)
		if (ili_ice_mode_ctrl(DISABLE, mcu) < 0)
			ILI_ERR("Disable ice mode failed after reading ddi reg\n");
}


void ili_ic_get_pc_counter(int stat)
{
	bool ice = atomic_read(&ilits->ice_stat);
	u32 pc = 0, pc_addr = ilits->chip->pc_counter_addr;
	u32 latch = 0, latch_addr = ilits->chip->pc_latch_addr;
	int ret = 0;

	ILI_DBG("stat = %d\n", stat);

	if (!ice) {
		if (stat == DO_SPI_RECOVER || stat == DO_I2C_RECOVER)
			ret = ili_ice_mode_ctrl(ENABLE, OFF);
		else
			ret = ili_ice_mode_ctrl(ENABLE, ON);

		if (ret < 0)
			ILI_ERR("Enable ice mode failed while reading pc counter\n");
	}

	if (ili_ice_mode_read(ilits->chip->pc_counter_addr, &pc, sizeof(u32)) < 0)
		ILI_ERR("Read pc conter error\n");

	if (ili_ice_mode_read(ilits->chip->pc_latch_addr, &latch, sizeof(u32)) < 0)
		ILI_ERR("Read pc latch error\n");

	ilits->fw_pc = pc;
	ilits->fw_latch = latch;
	ILI_ERR("Read counter (addr: 0x%x) = 0x%x, latch (addr: 0x%x) = 0x%x\n",
		pc_addr, ilits->fw_pc, latch_addr, ilits->fw_latch);

	/* Avoid screen abnormal. */
	if (stat == DO_SPI_RECOVER) {
		atomic_set(&ilits->ice_stat, DISABLE);
		return;
	}

	if (!ice) {
		if (ili_ice_mode_ctrl(DISABLE, ON) < 0)
			ILI_ERR("Disable ice mode failed while reading pc counter\n");
	}
}

int ili_ic_int_trigger_ctrl(bool pulse)
{
	/* It's supported by fw, and the level will be kept at high until data was already prepared. */
	if (ili_ic_func_ctrl("int_trigger", pulse) < 0) {
		ILI_ERR("Write CMD error, set back to <%s> trigger\n", ilits->int_pulse ? "Level" : "Pulse");
		return -1;
	}

	ilits->int_pulse = pulse;
	ILI_INFO("INT Trigger = %s\n", ilits->int_pulse ? "Level" : "Pulse");
	return 0;
}

int ili_ic_check_int_level(bool level)
{
	int timer = 3000;
	int gpio = IRQ_GPIO_NUM; //ilits->tp_int

	/*
	 * If callers have a trouble to use the gpio that is passed by vendors,
	 * please utlises a physical gpio number instead or call a help from them.
	 */

	while (--timer > 0) {
		if (level) {
			if (gpio_get_value(gpio)) {
				ILI_DBG("INT high detected.\n");
				return 0;
			}
		} else {
			if (!gpio_get_value(gpio)) {
				ILI_DBG("INT low detected.\n");;
				return 0;
			}
		}
		mdelay(1);
	}
	ILI_ERR("Error! INT level no detected.\n");
	return -1;
}

int ili_ic_check_int_pulse(bool pulse)
{
	if (!wait_event_interruptible_timeout(ilits->inq, !atomic_read(&ilits->cmd_int_check), msecs_to_jiffies(ilits->wait_int_timeout))) {
		ILI_ERR("Error! INT pulse no detected. Timeout = %d ms\n", ilits->wait_int_timeout);
		atomic_set(&ilits->cmd_int_check, DISABLE);
		return -1;
	}
	ILI_DBG("INT pulse detected.\n");
	return 0;
}

int ili_ic_check_busy(int count, int delay, bool irq)
{
	u8 cmd[2] = {0};
	u8 busy = 0, rby = 0;

	cmd[0] = P5_X_READ_DATA_CTRL;
	cmd[1] = P5_X_CDC_BUSY_STATE;

	if (ilits->actual_tp_mode == P5_X_FW_AP_MODE)
		rby = 0x41;
	else if (ilits->actual_tp_mode == P5_X_FW_TEST_MODE)
		rby = 0x51;
	else {
		ILI_ERR("Unknown TP mode (0x%x)\n", ilits->actual_tp_mode);
		return -EINVAL;
	}

	ILI_INFO("read byte = %x, delay = %d\n", rby, delay);

	do {
		if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0)
			ILI_ERR("Write check busy cmd failed\n");

		if (ilits->wrapper(&cmd[1], sizeof(u8), &busy, sizeof(u8), irq, OFF) < 0)
			ILI_ERR("Read check busy failed\n");

		ILI_DBG("busy = 0x%x\n", busy);

		if (busy == rby) {
			ILI_INFO("Check busy free\n");
			return 0;
		}

		mdelay(delay);
	} while (--count > 0);

	ILI_ERR("Check busy (0x%x) timeout !\n", busy);
	ili_ic_get_pc_counter(0);
	return -1;
}

int ili_ic_get_project_id(u8 *pdata, int size)
{
	int i;
	u32 tmp;
	bool ice = atomic_read(&ilits->ice_stat);

	if (!pdata) {
		ILI_ERR("pdata is null\n");
		return -ENOMEM;
	}

	ILI_INFO("Read size = %d\n", size);

	if (!ice)
		if (ili_ice_mode_ctrl(ENABLE, OFF) < 0)
			ILI_ERR("Enable ice mode failed while reading project id\n");

	if (ili_ice_mode_write(0x041000, 0x0, 1) < 0)
		ILI_ERR("Pull cs low failed\n");
	if (ili_ice_mode_write(0x041004, 0x66aa55, 3) < 0)
		ILI_ERR("Write key failed\n");

	if (ili_ice_mode_write(0x041008, 0x03, 1) < 0)
		ILI_ERR("Write 0x03 at 0x041008\n");

	if (ili_ice_mode_write(0x041008, (RSV_BK_ST_ADDR & 0xFF0000) >> 16, 1) < 0)
		ILI_ERR("Write address failed\n");
	if (ili_ice_mode_write(0x041008, (RSV_BK_ST_ADDR & 0x00FF00) >> 8, 1) < 0)
		ILI_ERR("Write address failed\n");
	if (ili_ice_mode_write(0x041008, (RSV_BK_ST_ADDR & 0x0000FF), 1) < 0)
		ILI_ERR("Write address failed\n");

	for (i = 0; i < size; i++) {
		if (ili_ice_mode_write(0x041008, 0xFF, 1) < 0)
			ILI_ERR("Write dummy failed\n");
		if (ili_ice_mode_read(0x41010, &tmp, sizeof(u8)) < 0)
			ILI_ERR("Read project id error\n");
		pdata[i] = tmp;
		ILI_INFO("project_id[%d] = 0x%x\n", i, pdata[i]);
	}

	ili_flash_clear_dma();

	if (ili_ice_mode_write(0x041000, 0x1, 1) < 0)
		ILI_ERR("Pull cs high\n");

	if (!ice)
		if (ili_ice_mode_ctrl(DISABLE, OFF) < 0)
			ILI_ERR("Disable ice mode failed while reading project id\n");

	return 0;
}

int ili_ic_get_core_ver(void)
{
	int i = 0, ret = 0;
	u8 cmd[2] = {0}, buf[10] = {0};

	ilits->protocol->core_ver_len = P5_X_CORE_VER_FOUR_LENGTH;

	if (ilits->info_from_hex) {
		buf[1] = ilits->fw_info[68];
		buf[2] = ilits->fw_info[69];
		buf[3] = ilits->fw_info[70];
		buf[4] = ilits->fw_info[71];
		goto out;
	}

	do {
		if (i == 0) {
			cmd[0] = P5_X_READ_DATA_CTRL;
			cmd[1] = P5_X_GET_CORE_VERSION_NEW;
		} else {
			cmd[0] = P5_X_READ_DATA_CTRL;
			cmd[1] = P5_X_GET_CORE_VERSION;
			ilits->protocol->core_ver_len = P5_X_CORE_VER_THREE_LENGTH;
		}

		if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0)
			ILI_ERR("Write core ver cmd failed\n");

		if (ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->core_ver_len, ON, OFF) < 0)
			ILI_ERR("Write core ver (0x%x) failed\n", cmd[1]);

		ILI_DBG("header = 0x%x\n", buf[0]);

		if (buf[0] == P5_X_GET_CORE_VERSION ||
			buf[0] == P5_X_GET_CORE_VERSION_NEW)
			break;

	} while (++i < 2);

	if (buf[0] == P5_X_GET_CORE_VERSION)
		buf[4] = 0;

	if (i >= 2) {
		ILI_ERR("Invalid header (0x%x)\n", buf[0]);
		ret = -EINVAL;
	}

out:
	ILI_INFO("Core version = %d.%d.%d.%d\n", buf[1], buf[2], buf[3], buf[4]);
	ilits->chip->core_ver = buf[1] << 24 | buf[2] << 16 | buf[3] << 8 | buf[4];
	return ret;
}

void ili_fw_uart_ctrl(u8 ctrl)
{
	u8 cmd[4] = {0};

	if (ctrl > 1) {
		ILI_INFO("Unknown cmd, ignore\n");
		return;
	}

	ILI_INFO("%s UART mode\n", ctrl ? "Enable" : "Disable");

	cmd[0] = P5_X_I2C_UART;
	cmd[1] = 0x3;
	cmd[2] = 0;
	cmd[3] = ctrl;

	if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) {
		ILI_INFO("Write fw uart cmd failed\n");
		return;
	}
}

int ili_ic_get_fw_ver(void)
{
	int ret = 0;
	u8 cmd[2] = {0};
	u8 buf[10] = {0};

	if (ilits->info_from_hex) {
		buf[1] = ilits->fw_info[48];
		buf[2] = ilits->fw_info[49];
		buf[3] = ilits->fw_info[50];
		buf[4] = ilits->fw_info[51];
		buf[5] = ilits->fw_mp_ver[0];
		buf[6] = ilits->fw_mp_ver[1];
		buf[7] = ilits->fw_mp_ver[2];
		buf[8] = ilits->fw_mp_ver[3];
		goto out;
	}

	cmd[0] = P5_X_READ_DATA_CTRL;
	cmd[1] = P5_X_GET_FW_VERSION;

	if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) {
		ILI_ERR("Write pre cmd failed\n");
		ret = -EINVAL;
		goto out;

	}

	if (ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->fw_ver_len, ON, OFF) < 0) {
		ILI_ERR("Write fw version cmd failed\n");
		ret = -EINVAL;
		goto out;
	}

	if (buf[0] != P5_X_GET_FW_VERSION) {
		ILI_ERR("Invalid firmware ver\n");
		ret = -1;
	}

out:
	ILI_INFO("Firmware version = %d.%d.%d.%d\n", buf[1], buf[2], buf[3], buf[4]);
	ILI_INFO("Firmware MP version = %d.%d.%d.%d\n", buf[5], buf[6], buf[7], buf[8]);
	ilits->chip->fw_ver = buf[1] << 24 | buf[2] << 16 | buf[3] << 8 | buf[4];
	ilits->chip->fw_mp_ver = buf[5] << 24 | buf[6] << 16 | buf[7] << 8 | buf[8];
	return ret;
}

int ili_ic_get_panel_info(void)
{
	int ret = 0;
	u8 cmd = P5_X_GET_PANEL_INFORMATION;
	u8 buf[10] = {0};
	u8 len = ilits->protocol->panel_info_len;

	if (ilits->info_from_hex && (ilits->chip->core_ver >= CORE_VER_1410)) {
		buf[1] = ilits->fw_info[16];
		buf[2] = ilits->fw_info[17];
		buf[3] = ilits->fw_info[18];
		buf[4] = ilits->fw_info[19];
		ilits->panel_wid = buf[2] << 8 | buf[1];
		ilits->panel_hei = buf[4] << 8 | buf[3];
		ilits->trans_xy = (ilits->chip->core_ver >= CORE_VER_1430
			&& (ilits->rib.nReportByPixel > 0)) ? ON : OFF;
		goto out;
	}

	len = (ilits->chip->core_ver >= CORE_VER_1430) ? 6 : len;

	ret = ilits->wrapper(&cmd, sizeof(cmd), buf, len, ON, OFF);
	if (ret < 0)
		ILI_ERR("Read panel info error\n");

	if (buf[0] != cmd) {
		ILI_INFO("Invalid panel info, use default resolution\n");
		ilits->panel_wid = TOUCH_SCREEN_X_MAX;
		ilits->panel_hei = TOUCH_SCREEN_Y_MAX;
		ilits->trans_xy = OFF;
	} else {
		ilits->panel_wid = buf[1] << 8 | buf[2];
		ilits->panel_hei = buf[3] << 8 | buf[4];
		ilits->trans_xy = (ilits->chip->core_ver >= CORE_VER_1430) ? buf[5] : OFF;
	}

out:
	ILI_INFO("Panel info: width = %d, height = %d\n", ilits->panel_wid, ilits->panel_hei);
	ILI_INFO("Transfer touch coordinate = %s\n", ilits->trans_xy ? "ON" : "OFF");
	return ret;
}

int ili_ic_get_tp_info(void)
{
	int ret = 0;
	u8 cmd[2] = {0};
	u8 buf[20] = {0};

	if (ilits->info_from_hex  && (ilits->chip->core_ver >= CORE_VER_1410)) {
		buf[1] = ilits->fw_info[5];
		buf[2] = ilits->fw_info[7];
		buf[3] = ilits->fw_info[8];
		buf[4] = ilits->fw_info[9];
		buf[5] = ilits->fw_info[10];
		buf[6] = ilits->fw_info[11];
		buf[7] = ilits->fw_info[12];
		buf[8] = ilits->fw_info[14];
		buf[11] = buf[7];
		buf[12] = buf[8];
		goto out;
	}

	cmd[0] = P5_X_READ_DATA_CTRL;
	cmd[1] = P5_X_GET_TP_INFORMATION;

	if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) {
		ILI_ERR("Write tp info pre cmd failed\n");
		ret = -EINVAL;
		goto out;

	}

	ret = ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->tp_info_len, ON, OFF);
	if (ret < 0) {
		ILI_ERR("Read tp info error\n");
		goto out;
	}

	if (buf[0] != P5_X_GET_TP_INFORMATION) {
		ILI_ERR("Invalid tp info\n");
		ret = -1;
		goto out;
	}

out:
	ilits->min_x = buf[1];
	ilits->min_y = buf[2];
	ilits->max_x = buf[4] << 8 | buf[3];
	ilits->max_y = buf[6] << 8 | buf[5];
	ilits->xch_num = buf[7];
	ilits->ych_num = buf[8];
	ilits->stx = buf[11];
	ilits->srx = buf[12];

	ILI_INFO("TP Info: min_x = %d, min_y = %d, max_x = %d, max_y = %d\n", ilits->min_x, ilits->min_y, ilits->max_x, ilits->max_y);
	ILI_INFO("TP Info: xch = %d, ych = %d, stx = %d, srx = %d\n", ilits->xch_num, ilits->ych_num, ilits->stx, ilits->srx);
	return ret;
}

static void ilitek_tddi_ic_check_protocol_ver(u32 pver)
{
	int i = 0;

	if (ilits->protocol->ver == pver) {
		ILI_DBG("same procotol version, do nothing\n");
		return;
	}

	for (i = 0; i < PROTOCL_VER_NUM - 1; i++) {
		if (protocol_info[i].ver == pver) {
			ilits->protocol = &protocol_info[i];
			ILI_INFO("update protocol version = %x\n", ilits->protocol->ver);
			return;
		}
	}

	ILI_ERR("Not found a correct protocol version in list, use newest version\n");
	ilits->protocol = &protocol_info[PROTOCL_VER_NUM - 1];
}

int ili_ic_get_protocl_ver(void)
{
	int ret = 0;
	u8 cmd[2] = {0};
	u8 buf[10] = {0};
	u32 ver;

	if (ilits->info_from_hex) {
		buf[1] = ilits->fw_info[72];
		buf[2] = ilits->fw_info[73];
		buf[3] = ilits->fw_info[74];
		goto out;
	}

	cmd[0] = P5_X_READ_DATA_CTRL;
	cmd[1] = P5_X_GET_PROTOCOL_VERSION;

	if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) {
		ILI_ERR("Write protocol ver pre cmd failed\n");
		ret = -EINVAL;
		goto out;

	}

	if (ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->pro_ver_len, ON, OFF) < 0) {
		ILI_ERR("Read protocol version error\n");
		ret = -EINVAL;
		goto out;
	}

	if (buf[0] != P5_X_GET_PROTOCOL_VERSION) {
		ILI_ERR("Invalid protocol ver\n");
		ret = -1;
		goto out;
	}

out:
	ver = buf[1] << 16 | buf[2] << 8 | buf[3];

	ilitek_tddi_ic_check_protocol_ver(ver);

	ILI_INFO("Protocol version = %d.%d.%d\n", ilits->protocol->ver >> 16,
		(ilits->protocol->ver >> 8) & 0xFF, ilits->protocol->ver & 0xFF);
	return ret;
}

int ili_ic_get_info(void)
{
	int ret = 0;

	if (!atomic_read(&ilits->ice_stat)) {
		ILI_ERR("ice mode doesn't enable\n");
		return -1;
	}


	if (ili_ice_mode_read(ilits->chip->pid_addr, &ilits->chip->pid, sizeof(u32)) < 0)
		ILI_ERR("Read chip pid error\n");

	if (ili_ice_mode_read(ilits->chip->otp_addr, &ilits->chip->otp_id, sizeof(u32)) < 0)
		ILI_ERR("Read otp id error\n");
	if (ili_ice_mode_read(ilits->chip->ana_addr, &ilits->chip->ana_id, sizeof(u32)) < 0)
		ILI_ERR("Read ana id error\n");

	ilits->chip->pid = ilits->chip->pid;
	ilits->chip->id = ilits->chip->pid >> 16;
	ilits->chip->type = (ilits->chip->pid & 0x0000FF00) >> 8;
	ilits->chip->ver = ilits->chip->pid & 0xFF;
	ilits->chip->otp_id &= 0xFF;
	ilits->chip->ana_id &= 0xFF;

	ILI_INFO("CHIP: PID = %x\n", (ilits->chip->pid >> 8));

	ret = ilitek_tddi_ic_check_support(ilits->chip->pid, ilits->chip->id);
	return ret;
}

int ili_ic_dummy_check(void)
{
	int ret = 0;
	u32 wdata = 0xA55A5AA5;
	u32 rdata = 0;

	if (!atomic_read(&ilits->ice_stat)) {
		ILI_ERR("ice mode doesn't enable\n");
		return -1;
	}

	if (ili_ice_mode_write(WDT9_DUMMY2, wdata, sizeof(u32)) < 0)
		ILI_ERR("Write dummy error\n");


	if (ili_ice_mode_read(WDT9_DUMMY2, &rdata, sizeof(u32)) < 0)
		ILI_ERR("Read dummy error\n");

	if (rdata != wdata) {
		ILI_ERR("Dummy check incorrect, rdata = %x wdata = %x \n", rdata, wdata);
		return -1;
	}
	ILI_INFO("Ilitek IC check successe\n");

	return ret;
}

static struct ilitek_ic_info chip;

void ili_ic_init(void)
{
	chip.pid_addr =		   	TDDI_PID_ADDR;
	chip.pc_counter_addr = 		TDDI_PC_COUNTER_ADDR;
	chip.pc_latch_addr =		TDDI_PC_LATCH_ADDR;
	chip.otp_addr =		   	TDDI_OTP_ID_ADDR;
	chip.ana_addr =		   	TDDI_ANA_ID_ADDR;
	chip.reset_addr =	   	TDDI_CHIP_RESET_ADDR;

	ilits->protocol = &protocol_info[PROTOCL_VER_NUM - 1];
	ilits->chip = &chip;
}