kernel_samsung_a34x-permissive/drivers/media/dvb-frontends/mt312.c

853 lines
18 KiB
C
Raw Normal View History

/*
Driver for Zarlink VP310/MT312/ZL10313 Satellite Channel Decoder
Copyright (C) 2003 Andreas Oberritter <obi@linuxtv.org>
Copyright (C) 2008 Matthias Schwarzott <zzam@gentoo.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
References:
http://products.zarlink.com/product_profiles/MT312.htm
http://products.zarlink.com/product_profiles/SL1935.htm
*/
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <media/dvb_frontend.h>
#include "mt312_priv.h"
#include "mt312.h"
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
struct mt312_state {
struct i2c_adapter *i2c;
/* configuration settings */
const struct mt312_config *config;
struct dvb_frontend frontend;
u8 id;
unsigned long xtal;
u8 freq_mult;
};
static int debug;
#define dprintk(args...) \
do { \
if (debug) \
printk(KERN_DEBUG "mt312: " args); \
} while (0)
#define MT312_PLL_CLK 10000000UL /* 10 MHz */
#define MT312_PLL_CLK_10_111 10111000UL /* 10.111 MHz */
static int mt312_read(struct mt312_state *state, const enum mt312_reg_addr reg,
u8 *buf, const size_t count)
{
int ret;
struct i2c_msg msg[2];
u8 regbuf[1] = { reg };
msg[0].addr = state->config->demod_address;
msg[0].flags = 0;
msg[0].buf = regbuf;
msg[0].len = 1;
msg[1].addr = state->config->demod_address;
msg[1].flags = I2C_M_RD;
msg[1].buf = buf;
msg[1].len = count;
ret = i2c_transfer(state->i2c, msg, 2);
if (ret != 2) {
printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
return -EREMOTEIO;
}
if (debug) {
int i;
dprintk("R(%d):", reg & 0x7f);
for (i = 0; i < count; i++)
printk(KERN_CONT " %02x", buf[i]);
printk("\n");
}
return 0;
}
static int mt312_write(struct mt312_state *state, const enum mt312_reg_addr reg,
const u8 *src, const size_t count)
{
int ret;
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg;
if (1 + count > sizeof(buf)) {
printk(KERN_WARNING
"mt312: write: len=%zu is too big!\n", count);
return -EINVAL;
}
if (debug) {
int i;
dprintk("W(%d):", reg & 0x7f);
for (i = 0; i < count; i++)
printk(KERN_CONT " %02x", src[i]);
printk("\n");
}
buf[0] = reg;
memcpy(&buf[1], src, count);
msg.addr = state->config->demod_address;
msg.flags = 0;
msg.buf = buf;
msg.len = count + 1;
ret = i2c_transfer(state->i2c, &msg, 1);
if (ret != 1) {
dprintk("%s: ret == %d\n", __func__, ret);
return -EREMOTEIO;
}
return 0;
}
static inline int mt312_readreg(struct mt312_state *state,
const enum mt312_reg_addr reg, u8 *val)
{
return mt312_read(state, reg, val, 1);
}
static inline int mt312_writereg(struct mt312_state *state,
const enum mt312_reg_addr reg, const u8 val)
{
u8 tmp = val; /* see gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 */
return mt312_write(state, reg, &tmp, 1);
}
static inline u32 mt312_div(u32 a, u32 b)
{
return (a + (b / 2)) / b;
}
static int mt312_reset(struct mt312_state *state, const u8 full)
{
return mt312_writereg(state, RESET, full ? 0x80 : 0x40);
}
static int mt312_get_inversion(struct mt312_state *state,
enum fe_spectral_inversion *i)
{
int ret;
u8 vit_mode;
ret = mt312_readreg(state, VIT_MODE, &vit_mode);
if (ret < 0)
return ret;
if (vit_mode & 0x80) /* auto inversion was used */
*i = (vit_mode & 0x40) ? INVERSION_ON : INVERSION_OFF;
return 0;
}
static int mt312_get_symbol_rate(struct mt312_state *state, u32 *sr)
{
int ret;
u8 sym_rate_h;
u8 dec_ratio;
u16 sym_rat_op;
u16 monitor;
u8 buf[2];
ret = mt312_readreg(state, SYM_RATE_H, &sym_rate_h);
if (ret < 0)
return ret;
if (sym_rate_h & 0x80) {
/* symbol rate search was used */
ret = mt312_writereg(state, MON_CTRL, 0x03);
if (ret < 0)
return ret;
ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
if (ret < 0)
return ret;
monitor = (buf[0] << 8) | buf[1];
dprintk("sr(auto) = %u\n",
mt312_div(monitor * 15625, 4));
} else {
ret = mt312_writereg(state, MON_CTRL, 0x05);
if (ret < 0)
return ret;
ret = mt312_read(state, MONITOR_H, buf, sizeof(buf));
if (ret < 0)
return ret;
dec_ratio = ((buf[0] >> 5) & 0x07) * 32;
ret = mt312_read(state, SYM_RAT_OP_H, buf, sizeof(buf));
if (ret < 0)
return ret;
sym_rat_op = (buf[0] << 8) | buf[1];
dprintk("sym_rat_op=%d dec_ratio=%d\n",
sym_rat_op, dec_ratio);
dprintk("*sr(manual) = %lu\n",
(((state->xtal * 8192) / (sym_rat_op + 8192)) *
2) - dec_ratio);
}
return 0;
}
static int mt312_get_code_rate(struct mt312_state *state, enum fe_code_rate *cr)
{
const enum fe_code_rate fec_tab[8] =
{ FEC_1_2, FEC_2_3, FEC_3_4, FEC_5_6, FEC_6_7, FEC_7_8,
FEC_AUTO, FEC_AUTO };
int ret;
u8 fec_status;
ret = mt312_readreg(state, FEC_STATUS, &fec_status);
if (ret < 0)
return ret;
*cr = fec_tab[(fec_status >> 4) & 0x07];
return 0;
}
static int mt312_initfe(struct dvb_frontend *fe)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[2];
/* wake up */
ret = mt312_writereg(state, CONFIG,
(state->freq_mult == 6 ? 0x88 : 0x8c));
if (ret < 0)
return ret;
/* wait at least 150 usec */
udelay(150);
/* full reset */
ret = mt312_reset(state, 1);
if (ret < 0)
return ret;
/* Per datasheet, write correct values. 09/28/03 ACCJr.
* If we don't do this, we won't get FE_HAS_VITERBI in the VP310. */
{
u8 buf_def[8] = { 0x14, 0x12, 0x03, 0x02,
0x01, 0x00, 0x00, 0x00 };
ret = mt312_write(state, VIT_SETUP, buf_def, sizeof(buf_def));
if (ret < 0)
return ret;
}
switch (state->id) {
case ID_ZL10313:
/* enable ADC */
ret = mt312_writereg(state, GPP_CTRL, 0x80);
if (ret < 0)
return ret;
/* configure ZL10313 for optimal ADC performance */
buf[0] = 0x80;
buf[1] = 0xB0;
ret = mt312_write(state, HW_CTRL, buf, 2);
if (ret < 0)
return ret;
/* enable MPEG output and ADCs */
ret = mt312_writereg(state, HW_CTRL, 0x00);
if (ret < 0)
return ret;
ret = mt312_writereg(state, MPEG_CTRL, 0x00);
if (ret < 0)
return ret;
break;
}
/* SYS_CLK */
buf[0] = mt312_div(state->xtal * state->freq_mult * 2, 1000000);
/* DISEQC_RATIO */
buf[1] = mt312_div(state->xtal, 22000 * 4);
ret = mt312_write(state, SYS_CLK, buf, sizeof(buf));
if (ret < 0)
return ret;
ret = mt312_writereg(state, SNR_THS_HIGH, 0x32);
if (ret < 0)
return ret;
/* different MOCLK polarity */
switch (state->id) {
case ID_ZL10313:
buf[0] = 0x33;
break;
default:
buf[0] = 0x53;
break;
}
ret = mt312_writereg(state, OP_CTRL, buf[0]);
if (ret < 0)
return ret;
/* TS_SW_LIM */
buf[0] = 0x8c;
buf[1] = 0x98;
ret = mt312_write(state, TS_SW_LIM_L, buf, sizeof(buf));
if (ret < 0)
return ret;
ret = mt312_writereg(state, CS_SW_LIM, 0x69);
if (ret < 0)
return ret;
return 0;
}
static int mt312_send_master_cmd(struct dvb_frontend *fe,
struct dvb_diseqc_master_cmd *c)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 diseqc_mode;
if ((c->msg_len == 0) || (c->msg_len > sizeof(c->msg)))
return -EINVAL;
ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
if (ret < 0)
return ret;
ret = mt312_write(state, (0x80 | DISEQC_INSTR), c->msg, c->msg_len);
if (ret < 0)
return ret;
ret = mt312_writereg(state, DISEQC_MODE,
(diseqc_mode & 0x40) | ((c->msg_len - 1) << 3)
| 0x04);
if (ret < 0)
return ret;
/* is there a better way to wait for message to be transmitted */
msleep(100);
/* set DISEQC_MODE[2:0] to zero if a return message is expected */
if (c->msg[0] & 0x02) {
ret = mt312_writereg(state, DISEQC_MODE, (diseqc_mode & 0x40));
if (ret < 0)
return ret;
}
return 0;
}
static int mt312_send_burst(struct dvb_frontend *fe,
const enum fe_sec_mini_cmd c)
{
struct mt312_state *state = fe->demodulator_priv;
const u8 mini_tab[2] = { 0x02, 0x03 };
int ret;
u8 diseqc_mode;
if (c > SEC_MINI_B)
return -EINVAL;
ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
if (ret < 0)
return ret;
ret = mt312_writereg(state, DISEQC_MODE,
(diseqc_mode & 0x40) | mini_tab[c]);
if (ret < 0)
return ret;
return 0;
}
static int mt312_set_tone(struct dvb_frontend *fe,
const enum fe_sec_tone_mode t)
{
struct mt312_state *state = fe->demodulator_priv;
const u8 tone_tab[2] = { 0x01, 0x00 };
int ret;
u8 diseqc_mode;
if (t > SEC_TONE_OFF)
return -EINVAL;
ret = mt312_readreg(state, DISEQC_MODE, &diseqc_mode);
if (ret < 0)
return ret;
ret = mt312_writereg(state, DISEQC_MODE,
(diseqc_mode & 0x40) | tone_tab[t]);
if (ret < 0)
return ret;
return 0;
}
static int mt312_set_voltage(struct dvb_frontend *fe,
const enum fe_sec_voltage v)
{
struct mt312_state *state = fe->demodulator_priv;
const u8 volt_tab[3] = { 0x00, 0x40, 0x00 };
u8 val;
if (v > SEC_VOLTAGE_OFF)
return -EINVAL;
val = volt_tab[v];
if (state->config->voltage_inverted)
val ^= 0x40;
return mt312_writereg(state, DISEQC_MODE, val);
}
static int mt312_read_status(struct dvb_frontend *fe, enum fe_status *s)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 status[3];
*s = 0;
ret = mt312_read(state, QPSK_STAT_H, status, sizeof(status));
if (ret < 0)
return ret;
dprintk("QPSK_STAT_H: 0x%02x, QPSK_STAT_L: 0x%02x, FEC_STATUS: 0x%02x\n",
status[0], status[1], status[2]);
if (status[0] & 0xc0)
*s |= FE_HAS_SIGNAL; /* signal noise ratio */
if (status[0] & 0x04)
*s |= FE_HAS_CARRIER; /* qpsk carrier lock */
if (status[2] & 0x02)
*s |= FE_HAS_VITERBI; /* viterbi lock */
if (status[2] & 0x04)
*s |= FE_HAS_SYNC; /* byte align lock */
if (status[0] & 0x01)
*s |= FE_HAS_LOCK; /* qpsk lock */
return 0;
}
static int mt312_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[3];
ret = mt312_read(state, RS_BERCNT_H, buf, 3);
if (ret < 0)
return ret;
*ber = ((buf[0] << 16) | (buf[1] << 8) | buf[2]) * 64;
return 0;
}
static int mt312_read_signal_strength(struct dvb_frontend *fe,
u16 *signal_strength)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[3];
u16 agc;
s16 err_db;
ret = mt312_read(state, AGC_H, buf, sizeof(buf));
if (ret < 0)
return ret;
agc = (buf[0] << 6) | (buf[1] >> 2);
err_db = (s16) (((buf[1] & 0x03) << 14) | buf[2] << 6) >> 6;
*signal_strength = agc;
dprintk("agc=%08x err_db=%hd\n", agc, err_db);
return 0;
}
static int mt312_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[2];
ret = mt312_read(state, M_SNR_H, buf, sizeof(buf));
if (ret < 0)
return ret;
*snr = 0xFFFF - ((((buf[0] & 0x7f) << 8) | buf[1]) << 1);
return 0;
}
static int mt312_read_ucblocks(struct dvb_frontend *fe, u32 *ubc)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[2];
ret = mt312_read(state, RS_UBC_H, buf, sizeof(buf));
if (ret < 0)
return ret;
*ubc = (buf[0] << 8) | buf[1];
return 0;
}
static int mt312_set_frontend(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 buf[5], config_val;
u16 sr;
const u8 fec_tab[10] =
{ 0x00, 0x01, 0x02, 0x04, 0x3f, 0x08, 0x10, 0x20, 0x3f, 0x3f };
const u8 inv_tab[3] = { 0x00, 0x40, 0x80 };
dprintk("%s: Freq %d\n", __func__, p->frequency);
if ((p->frequency < fe->ops.info.frequency_min_hz / kHz)
|| (p->frequency > fe->ops.info.frequency_max_hz / kHz))
return -EINVAL;
if (((int)p->inversion < INVERSION_OFF)
|| (p->inversion > INVERSION_ON))
return -EINVAL;
if ((p->symbol_rate < fe->ops.info.symbol_rate_min)
|| (p->symbol_rate > fe->ops.info.symbol_rate_max))
return -EINVAL;
if (((int)p->fec_inner < FEC_NONE)
|| (p->fec_inner > FEC_AUTO))
return -EINVAL;
if ((p->fec_inner == FEC_4_5)
|| (p->fec_inner == FEC_8_9))
return -EINVAL;
switch (state->id) {
case ID_VP310:
/* For now we will do this only for the VP310.
* It should be better for the mt312 as well,
* but tuning will be slower. ACCJr 09/29/03
*/
ret = mt312_readreg(state, CONFIG, &config_val);
if (ret < 0)
return ret;
if (p->symbol_rate >= 30000000) {
/* Note that 30MS/s should use 90MHz */
if (state->freq_mult == 6) {
/* We are running 60MHz */
state->freq_mult = 9;
ret = mt312_initfe(fe);
if (ret < 0)
return ret;
}
} else {
if (state->freq_mult == 9) {
/* We are running 90MHz */
state->freq_mult = 6;
ret = mt312_initfe(fe);
if (ret < 0)
return ret;
}
}
break;
case ID_MT312:
case ID_ZL10313:
break;
default:
return -EINVAL;
}
if (fe->ops.tuner_ops.set_params) {
fe->ops.tuner_ops.set_params(fe);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
}
/* sr = (u16)(sr * 256.0 / 1000000.0) */
sr = mt312_div(p->symbol_rate * 4, 15625);
/* SYM_RATE */
buf[0] = (sr >> 8) & 0x3f;
buf[1] = (sr >> 0) & 0xff;
/* VIT_MODE */
buf[2] = inv_tab[p->inversion] | fec_tab[p->fec_inner];
/* QPSK_CTRL */
buf[3] = 0x40; /* swap I and Q before QPSK demodulation */
if (p->symbol_rate < 10000000)
buf[3] |= 0x04; /* use afc mode */
/* GO */
buf[4] = 0x01;
ret = mt312_write(state, SYM_RATE_H, buf, sizeof(buf));
if (ret < 0)
return ret;
mt312_reset(state, 0);
return 0;
}
static int mt312_get_frontend(struct dvb_frontend *fe,
struct dtv_frontend_properties *p)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
ret = mt312_get_inversion(state, &p->inversion);
if (ret < 0)
return ret;
ret = mt312_get_symbol_rate(state, &p->symbol_rate);
if (ret < 0)
return ret;
ret = mt312_get_code_rate(state, &p->fec_inner);
if (ret < 0)
return ret;
return 0;
}
static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct mt312_state *state = fe->demodulator_priv;
u8 val = 0x00;
int ret;
switch (state->id) {
case ID_ZL10313:
ret = mt312_readreg(state, GPP_CTRL, &val);
if (ret < 0)
goto error;
/* preserve this bit to not accidentally shutdown ADC */
val &= 0x80;
break;
}
if (enable)
val |= 0x40;
else
val &= ~0x40;
ret = mt312_writereg(state, GPP_CTRL, val);
error:
return ret;
}
static int mt312_sleep(struct dvb_frontend *fe)
{
struct mt312_state *state = fe->demodulator_priv;
int ret;
u8 config;
/* reset all registers to defaults */
ret = mt312_reset(state, 1);
if (ret < 0)
return ret;
if (state->id == ID_ZL10313) {
/* reset ADC */
ret = mt312_writereg(state, GPP_CTRL, 0x00);
if (ret < 0)
return ret;
/* full shutdown of ADCs, mpeg bus tristated */
ret = mt312_writereg(state, HW_CTRL, 0x0d);
if (ret < 0)
return ret;
}
ret = mt312_readreg(state, CONFIG, &config);
if (ret < 0)
return ret;
/* enter standby */
ret = mt312_writereg(state, CONFIG, config & 0x7f);
if (ret < 0)
return ret;
return 0;
}
static int mt312_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *fesettings)
{
fesettings->min_delay_ms = 50;
fesettings->step_size = 0;
fesettings->max_drift = 0;
return 0;
}
static void mt312_release(struct dvb_frontend *fe)
{
struct mt312_state *state = fe->demodulator_priv;
kfree(state);
}
#define MT312_SYS_CLK 90000000UL /* 90 MHz */
static const struct dvb_frontend_ops mt312_ops = {
.delsys = { SYS_DVBS },
.info = {
.name = "Zarlink ???? DVB-S",
.frequency_min_hz = 950 * MHz,
.frequency_max_hz = 2150 * MHz,
/* FIXME: adjust freq to real used xtal */
.frequency_stepsize_hz = MT312_PLL_CLK / 128,
.symbol_rate_min = MT312_SYS_CLK / 128, /* FIXME as above */
.symbol_rate_max = MT312_SYS_CLK / 2,
.caps =
FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_MUTE_TS |
FE_CAN_RECOVER
},
.release = mt312_release,
.init = mt312_initfe,
.sleep = mt312_sleep,
.i2c_gate_ctrl = mt312_i2c_gate_ctrl,
.set_frontend = mt312_set_frontend,
.get_frontend = mt312_get_frontend,
.get_tune_settings = mt312_get_tune_settings,
.read_status = mt312_read_status,
.read_ber = mt312_read_ber,
.read_signal_strength = mt312_read_signal_strength,
.read_snr = mt312_read_snr,
.read_ucblocks = mt312_read_ucblocks,
.diseqc_send_master_cmd = mt312_send_master_cmd,
.diseqc_send_burst = mt312_send_burst,
.set_tone = mt312_set_tone,
.set_voltage = mt312_set_voltage,
};
struct dvb_frontend *mt312_attach(const struct mt312_config *config,
struct i2c_adapter *i2c)
{
struct mt312_state *state = NULL;
/* allocate memory for the internal state */
state = kzalloc(sizeof(struct mt312_state), GFP_KERNEL);
if (state == NULL)
goto error;
/* setup the state */
state->config = config;
state->i2c = i2c;
/* check if the demod is there */
if (mt312_readreg(state, ID, &state->id) < 0)
goto error;
/* create dvb_frontend */
memcpy(&state->frontend.ops, &mt312_ops,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
switch (state->id) {
case ID_VP310:
strcpy(state->frontend.ops.info.name, "Zarlink VP310 DVB-S");
state->xtal = MT312_PLL_CLK;
state->freq_mult = 9;
break;
case ID_MT312:
strcpy(state->frontend.ops.info.name, "Zarlink MT312 DVB-S");
state->xtal = MT312_PLL_CLK;
state->freq_mult = 6;
break;
case ID_ZL10313:
strcpy(state->frontend.ops.info.name, "Zarlink ZL10313 DVB-S");
state->xtal = MT312_PLL_CLK_10_111;
state->freq_mult = 9;
break;
default:
printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313 are supported chips.\n");
goto error;
}
return &state->frontend;
error:
kfree(state);
return NULL;
}
EXPORT_SYMBOL(mt312_attach);
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
MODULE_LICENSE("GPL");