562 lines
14 KiB
C
562 lines
14 KiB
C
|
/*
|
||
|
* drivers/media/i2c/adp1653.c
|
||
|
*
|
||
|
* Copyright (C) 2008--2011 Nokia Corporation
|
||
|
*
|
||
|
* Contact: Sakari Ailus <sakari.ailus@iki.fi>
|
||
|
*
|
||
|
* Contributors:
|
||
|
* Sakari Ailus <sakari.ailus@iki.fi>
|
||
|
* Tuukka Toivonen <tuukkat76@gmail.com>
|
||
|
* Pavel Machek <pavel@ucw.cz>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License
|
||
|
* version 2 as published by the Free Software Foundation.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful, but
|
||
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
||
|
* General Public License for more details.
|
||
|
*
|
||
|
* TODO:
|
||
|
* - fault interrupt handling
|
||
|
* - hardware strobe
|
||
|
* - power doesn't need to be ON if all lights are off
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/i2c.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/of.h>
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <media/i2c/adp1653.h>
|
||
|
#include <media/v4l2-device.h>
|
||
|
|
||
|
#define TIMEOUT_MAX 820000
|
||
|
#define TIMEOUT_STEP 54600
|
||
|
#define TIMEOUT_MIN (TIMEOUT_MAX - ADP1653_REG_CONFIG_TMR_SET_MAX \
|
||
|
* TIMEOUT_STEP)
|
||
|
#define TIMEOUT_US_TO_CODE(t) ((TIMEOUT_MAX + (TIMEOUT_STEP / 2) - (t)) \
|
||
|
/ TIMEOUT_STEP)
|
||
|
#define TIMEOUT_CODE_TO_US(c) (TIMEOUT_MAX - (c) * TIMEOUT_STEP)
|
||
|
|
||
|
/* Write values into ADP1653 registers. */
|
||
|
static int adp1653_update_hw(struct adp1653_flash *flash)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
|
||
|
u8 out_sel;
|
||
|
u8 config = 0;
|
||
|
int rval;
|
||
|
|
||
|
out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
|
||
|
flash->indicator_intensity->val)
|
||
|
<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
|
||
|
|
||
|
switch (flash->led_mode->val) {
|
||
|
case V4L2_FLASH_LED_MODE_NONE:
|
||
|
break;
|
||
|
case V4L2_FLASH_LED_MODE_FLASH:
|
||
|
/* Flash mode, light on with strobe, duration from timer */
|
||
|
config = ADP1653_REG_CONFIG_TMR_CFG;
|
||
|
config |= TIMEOUT_US_TO_CODE(flash->flash_timeout->val)
|
||
|
<< ADP1653_REG_CONFIG_TMR_SET_SHIFT;
|
||
|
break;
|
||
|
case V4L2_FLASH_LED_MODE_TORCH:
|
||
|
/* Torch mode, light immediately on, duration indefinite */
|
||
|
out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
|
||
|
flash->torch_intensity->val)
|
||
|
<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
|
||
|
if (rval < 0)
|
||
|
return rval;
|
||
|
|
||
|
rval = i2c_smbus_write_byte_data(client, ADP1653_REG_CONFIG, config);
|
||
|
if (rval < 0)
|
||
|
return rval;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adp1653_get_fault(struct adp1653_flash *flash)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
|
||
|
int fault;
|
||
|
int rval;
|
||
|
|
||
|
fault = i2c_smbus_read_byte_data(client, ADP1653_REG_FAULT);
|
||
|
if (fault < 0)
|
||
|
return fault;
|
||
|
|
||
|
flash->fault |= fault;
|
||
|
|
||
|
if (!flash->fault)
|
||
|
return 0;
|
||
|
|
||
|
/* Clear faults. */
|
||
|
rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
|
||
|
if (rval < 0)
|
||
|
return rval;
|
||
|
|
||
|
flash->led_mode->val = V4L2_FLASH_LED_MODE_NONE;
|
||
|
|
||
|
rval = adp1653_update_hw(flash);
|
||
|
if (rval)
|
||
|
return rval;
|
||
|
|
||
|
return flash->fault;
|
||
|
}
|
||
|
|
||
|
static int adp1653_strobe(struct adp1653_flash *flash, int enable)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
|
||
|
u8 out_sel = ADP1653_INDICATOR_INTENSITY_uA_TO_REG(
|
||
|
flash->indicator_intensity->val)
|
||
|
<< ADP1653_REG_OUT_SEL_ILED_SHIFT;
|
||
|
int rval;
|
||
|
|
||
|
if (flash->led_mode->val != V4L2_FLASH_LED_MODE_FLASH)
|
||
|
return -EBUSY;
|
||
|
|
||
|
if (!enable)
|
||
|
return i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL,
|
||
|
out_sel);
|
||
|
|
||
|
out_sel |= ADP1653_FLASH_INTENSITY_mA_TO_REG(
|
||
|
flash->flash_intensity->val)
|
||
|
<< ADP1653_REG_OUT_SEL_HPLED_SHIFT;
|
||
|
rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, out_sel);
|
||
|
if (rval)
|
||
|
return rval;
|
||
|
|
||
|
/* Software strobe using i2c */
|
||
|
rval = i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE,
|
||
|
ADP1653_REG_SW_STROBE_SW_STROBE);
|
||
|
if (rval)
|
||
|
return rval;
|
||
|
return i2c_smbus_write_byte_data(client, ADP1653_REG_SW_STROBE, 0);
|
||
|
}
|
||
|
|
||
|
/* --------------------------------------------------------------------------
|
||
|
* V4L2 controls
|
||
|
*/
|
||
|
|
||
|
static int adp1653_get_ctrl(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
struct adp1653_flash *flash =
|
||
|
container_of(ctrl->handler, struct adp1653_flash, ctrls);
|
||
|
int rval;
|
||
|
|
||
|
rval = adp1653_get_fault(flash);
|
||
|
if (rval)
|
||
|
return rval;
|
||
|
|
||
|
ctrl->cur.val = 0;
|
||
|
|
||
|
if (flash->fault & ADP1653_REG_FAULT_FLT_SCP)
|
||
|
ctrl->cur.val |= V4L2_FLASH_FAULT_SHORT_CIRCUIT;
|
||
|
if (flash->fault & ADP1653_REG_FAULT_FLT_OT)
|
||
|
ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_TEMPERATURE;
|
||
|
if (flash->fault & ADP1653_REG_FAULT_FLT_TMR)
|
||
|
ctrl->cur.val |= V4L2_FLASH_FAULT_TIMEOUT;
|
||
|
if (flash->fault & ADP1653_REG_FAULT_FLT_OV)
|
||
|
ctrl->cur.val |= V4L2_FLASH_FAULT_OVER_VOLTAGE;
|
||
|
|
||
|
flash->fault = 0;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adp1653_set_ctrl(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
struct adp1653_flash *flash =
|
||
|
container_of(ctrl->handler, struct adp1653_flash, ctrls);
|
||
|
int rval;
|
||
|
|
||
|
rval = adp1653_get_fault(flash);
|
||
|
if (rval)
|
||
|
return rval;
|
||
|
if ((rval & (ADP1653_REG_FAULT_FLT_SCP |
|
||
|
ADP1653_REG_FAULT_FLT_OT |
|
||
|
ADP1653_REG_FAULT_FLT_OV)) &&
|
||
|
(ctrl->id == V4L2_CID_FLASH_STROBE ||
|
||
|
ctrl->id == V4L2_CID_FLASH_TORCH_INTENSITY ||
|
||
|
ctrl->id == V4L2_CID_FLASH_LED_MODE))
|
||
|
return -EBUSY;
|
||
|
|
||
|
switch (ctrl->id) {
|
||
|
case V4L2_CID_FLASH_STROBE:
|
||
|
return adp1653_strobe(flash, 1);
|
||
|
case V4L2_CID_FLASH_STROBE_STOP:
|
||
|
return adp1653_strobe(flash, 0);
|
||
|
}
|
||
|
|
||
|
return adp1653_update_hw(flash);
|
||
|
}
|
||
|
|
||
|
static const struct v4l2_ctrl_ops adp1653_ctrl_ops = {
|
||
|
.g_volatile_ctrl = adp1653_get_ctrl,
|
||
|
.s_ctrl = adp1653_set_ctrl,
|
||
|
};
|
||
|
|
||
|
static int adp1653_init_controls(struct adp1653_flash *flash)
|
||
|
{
|
||
|
struct v4l2_ctrl *fault;
|
||
|
|
||
|
v4l2_ctrl_handler_init(&flash->ctrls, 9);
|
||
|
|
||
|
flash->led_mode =
|
||
|
v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_LED_MODE,
|
||
|
V4L2_FLASH_LED_MODE_TORCH, ~0x7, 0);
|
||
|
v4l2_ctrl_new_std_menu(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_STROBE_SOURCE,
|
||
|
V4L2_FLASH_STROBE_SOURCE_SOFTWARE, ~0x1, 0);
|
||
|
v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_STROBE, 0, 0, 0, 0);
|
||
|
v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_STROBE_STOP, 0, 0, 0, 0);
|
||
|
flash->flash_timeout =
|
||
|
v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_TIMEOUT, TIMEOUT_MIN,
|
||
|
flash->platform_data->max_flash_timeout,
|
||
|
TIMEOUT_STEP,
|
||
|
flash->platform_data->max_flash_timeout);
|
||
|
flash->flash_intensity =
|
||
|
v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_INTENSITY,
|
||
|
ADP1653_FLASH_INTENSITY_MIN,
|
||
|
flash->platform_data->max_flash_intensity,
|
||
|
1, flash->platform_data->max_flash_intensity);
|
||
|
flash->torch_intensity =
|
||
|
v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_TORCH_INTENSITY,
|
||
|
ADP1653_TORCH_INTENSITY_MIN,
|
||
|
flash->platform_data->max_torch_intensity,
|
||
|
ADP1653_FLASH_INTENSITY_STEP,
|
||
|
flash->platform_data->max_torch_intensity);
|
||
|
flash->indicator_intensity =
|
||
|
v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_INDICATOR_INTENSITY,
|
||
|
ADP1653_INDICATOR_INTENSITY_MIN,
|
||
|
flash->platform_data->max_indicator_intensity,
|
||
|
ADP1653_INDICATOR_INTENSITY_STEP,
|
||
|
ADP1653_INDICATOR_INTENSITY_MIN);
|
||
|
fault = v4l2_ctrl_new_std(&flash->ctrls, &adp1653_ctrl_ops,
|
||
|
V4L2_CID_FLASH_FAULT, 0,
|
||
|
V4L2_FLASH_FAULT_OVER_VOLTAGE
|
||
|
| V4L2_FLASH_FAULT_OVER_TEMPERATURE
|
||
|
| V4L2_FLASH_FAULT_SHORT_CIRCUIT, 0, 0);
|
||
|
|
||
|
if (flash->ctrls.error)
|
||
|
return flash->ctrls.error;
|
||
|
|
||
|
fault->flags |= V4L2_CTRL_FLAG_VOLATILE;
|
||
|
|
||
|
flash->subdev.ctrl_handler = &flash->ctrls;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* --------------------------------------------------------------------------
|
||
|
* V4L2 subdev operations
|
||
|
*/
|
||
|
|
||
|
static int
|
||
|
adp1653_init_device(struct adp1653_flash *flash)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(&flash->subdev);
|
||
|
int rval;
|
||
|
|
||
|
/* Clear FAULT register by writing zero to OUT_SEL */
|
||
|
rval = i2c_smbus_write_byte_data(client, ADP1653_REG_OUT_SEL, 0);
|
||
|
if (rval < 0) {
|
||
|
dev_err(&client->dev, "failed writing fault register\n");
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
mutex_lock(flash->ctrls.lock);
|
||
|
/* Reset faults before reading new ones. */
|
||
|
flash->fault = 0;
|
||
|
rval = adp1653_get_fault(flash);
|
||
|
mutex_unlock(flash->ctrls.lock);
|
||
|
if (rval > 0) {
|
||
|
dev_err(&client->dev, "faults detected: 0x%1.1x\n", rval);
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
mutex_lock(flash->ctrls.lock);
|
||
|
rval = adp1653_update_hw(flash);
|
||
|
mutex_unlock(flash->ctrls.lock);
|
||
|
if (rval) {
|
||
|
dev_err(&client->dev,
|
||
|
"adp1653_update_hw failed at %s\n", __func__);
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
__adp1653_set_power(struct adp1653_flash *flash, int on)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
if (flash->platform_data->power) {
|
||
|
ret = flash->platform_data->power(&flash->subdev, on);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
} else {
|
||
|
gpiod_set_value(flash->platform_data->enable_gpio, on);
|
||
|
if (on)
|
||
|
/* Some delay is apparently required. */
|
||
|
udelay(20);
|
||
|
}
|
||
|
|
||
|
if (!on)
|
||
|
return 0;
|
||
|
|
||
|
ret = adp1653_init_device(flash);
|
||
|
if (ret >= 0)
|
||
|
return ret;
|
||
|
|
||
|
if (flash->platform_data->power)
|
||
|
flash->platform_data->power(&flash->subdev, 0);
|
||
|
else
|
||
|
gpiod_set_value(flash->platform_data->enable_gpio, 0);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int
|
||
|
adp1653_set_power(struct v4l2_subdev *subdev, int on)
|
||
|
{
|
||
|
struct adp1653_flash *flash = to_adp1653_flash(subdev);
|
||
|
int ret = 0;
|
||
|
|
||
|
mutex_lock(&flash->power_lock);
|
||
|
|
||
|
/* If the power count is modified from 0 to != 0 or from != 0 to 0,
|
||
|
* update the power state.
|
||
|
*/
|
||
|
if (flash->power_count == !on) {
|
||
|
ret = __adp1653_set_power(flash, !!on);
|
||
|
if (ret < 0)
|
||
|
goto done;
|
||
|
}
|
||
|
|
||
|
/* Update the power count. */
|
||
|
flash->power_count += on ? 1 : -1;
|
||
|
WARN_ON(flash->power_count < 0);
|
||
|
|
||
|
done:
|
||
|
mutex_unlock(&flash->power_lock);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int adp1653_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
||
|
{
|
||
|
return adp1653_set_power(sd, 1);
|
||
|
}
|
||
|
|
||
|
static int adp1653_close(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
||
|
{
|
||
|
return adp1653_set_power(sd, 0);
|
||
|
}
|
||
|
|
||
|
static const struct v4l2_subdev_core_ops adp1653_core_ops = {
|
||
|
.s_power = adp1653_set_power,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_ops adp1653_ops = {
|
||
|
.core = &adp1653_core_ops,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_internal_ops adp1653_internal_ops = {
|
||
|
.open = adp1653_open,
|
||
|
.close = adp1653_close,
|
||
|
};
|
||
|
|
||
|
/* --------------------------------------------------------------------------
|
||
|
* I2C driver
|
||
|
*/
|
||
|
#ifdef CONFIG_PM
|
||
|
|
||
|
static int adp1653_suspend(struct device *dev)
|
||
|
{
|
||
|
struct i2c_client *client = to_i2c_client(dev);
|
||
|
struct v4l2_subdev *subdev = i2c_get_clientdata(client);
|
||
|
struct adp1653_flash *flash = to_adp1653_flash(subdev);
|
||
|
|
||
|
if (!flash->power_count)
|
||
|
return 0;
|
||
|
|
||
|
return __adp1653_set_power(flash, 0);
|
||
|
}
|
||
|
|
||
|
static int adp1653_resume(struct device *dev)
|
||
|
{
|
||
|
struct i2c_client *client = to_i2c_client(dev);
|
||
|
struct v4l2_subdev *subdev = i2c_get_clientdata(client);
|
||
|
struct adp1653_flash *flash = to_adp1653_flash(subdev);
|
||
|
|
||
|
if (!flash->power_count)
|
||
|
return 0;
|
||
|
|
||
|
return __adp1653_set_power(flash, 1);
|
||
|
}
|
||
|
|
||
|
#else
|
||
|
|
||
|
#define adp1653_suspend NULL
|
||
|
#define adp1653_resume NULL
|
||
|
|
||
|
#endif /* CONFIG_PM */
|
||
|
|
||
|
static int adp1653_of_init(struct i2c_client *client,
|
||
|
struct adp1653_flash *flash,
|
||
|
struct device_node *node)
|
||
|
{
|
||
|
struct adp1653_platform_data *pd;
|
||
|
struct device_node *child;
|
||
|
|
||
|
pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL);
|
||
|
if (!pd)
|
||
|
return -ENOMEM;
|
||
|
flash->platform_data = pd;
|
||
|
|
||
|
child = of_get_child_by_name(node, "flash");
|
||
|
if (!child)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (of_property_read_u32(child, "flash-timeout-us",
|
||
|
&pd->max_flash_timeout))
|
||
|
goto err;
|
||
|
|
||
|
if (of_property_read_u32(child, "flash-max-microamp",
|
||
|
&pd->max_flash_intensity))
|
||
|
goto err;
|
||
|
|
||
|
pd->max_flash_intensity /= 1000;
|
||
|
|
||
|
if (of_property_read_u32(child, "led-max-microamp",
|
||
|
&pd->max_torch_intensity))
|
||
|
goto err;
|
||
|
|
||
|
pd->max_torch_intensity /= 1000;
|
||
|
of_node_put(child);
|
||
|
|
||
|
child = of_get_child_by_name(node, "indicator");
|
||
|
if (!child)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (of_property_read_u32(child, "led-max-microamp",
|
||
|
&pd->max_indicator_intensity))
|
||
|
goto err;
|
||
|
|
||
|
of_node_put(child);
|
||
|
|
||
|
pd->enable_gpio = devm_gpiod_get(&client->dev, "enable", GPIOD_OUT_LOW);
|
||
|
if (IS_ERR(pd->enable_gpio)) {
|
||
|
dev_err(&client->dev, "Error getting GPIO\n");
|
||
|
return PTR_ERR(pd->enable_gpio);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
err:
|
||
|
dev_err(&client->dev, "Required property not found\n");
|
||
|
of_node_put(child);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
|
||
|
static int adp1653_probe(struct i2c_client *client,
|
||
|
const struct i2c_device_id *devid)
|
||
|
{
|
||
|
struct adp1653_flash *flash;
|
||
|
int ret;
|
||
|
|
||
|
flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
|
||
|
if (flash == NULL)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
if (client->dev.of_node) {
|
||
|
ret = adp1653_of_init(client, flash, client->dev.of_node);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
} else {
|
||
|
if (!client->dev.platform_data) {
|
||
|
dev_err(&client->dev,
|
||
|
"Neither DT not platform data provided\n");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
flash->platform_data = client->dev.platform_data;
|
||
|
}
|
||
|
|
||
|
mutex_init(&flash->power_lock);
|
||
|
|
||
|
v4l2_i2c_subdev_init(&flash->subdev, client, &adp1653_ops);
|
||
|
flash->subdev.internal_ops = &adp1653_internal_ops;
|
||
|
flash->subdev.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
||
|
|
||
|
ret = adp1653_init_controls(flash);
|
||
|
if (ret)
|
||
|
goto free_and_quit;
|
||
|
|
||
|
ret = media_entity_pads_init(&flash->subdev.entity, 0, NULL);
|
||
|
if (ret < 0)
|
||
|
goto free_and_quit;
|
||
|
|
||
|
flash->subdev.entity.function = MEDIA_ENT_F_FLASH;
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
free_and_quit:
|
||
|
dev_err(&client->dev, "adp1653: failed to register device\n");
|
||
|
v4l2_ctrl_handler_free(&flash->ctrls);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int adp1653_remove(struct i2c_client *client)
|
||
|
{
|
||
|
struct v4l2_subdev *subdev = i2c_get_clientdata(client);
|
||
|
struct adp1653_flash *flash = to_adp1653_flash(subdev);
|
||
|
|
||
|
v4l2_device_unregister_subdev(&flash->subdev);
|
||
|
v4l2_ctrl_handler_free(&flash->ctrls);
|
||
|
media_entity_cleanup(&flash->subdev.entity);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct i2c_device_id adp1653_id_table[] = {
|
||
|
{ ADP1653_NAME, 0 },
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(i2c, adp1653_id_table);
|
||
|
|
||
|
static const struct dev_pm_ops adp1653_pm_ops = {
|
||
|
.suspend = adp1653_suspend,
|
||
|
.resume = adp1653_resume,
|
||
|
};
|
||
|
|
||
|
static struct i2c_driver adp1653_i2c_driver = {
|
||
|
.driver = {
|
||
|
.name = ADP1653_NAME,
|
||
|
.pm = &adp1653_pm_ops,
|
||
|
},
|
||
|
.probe = adp1653_probe,
|
||
|
.remove = adp1653_remove,
|
||
|
.id_table = adp1653_id_table,
|
||
|
};
|
||
|
|
||
|
module_i2c_driver(adp1653_i2c_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Sakari Ailus <sakari.ailus@nokia.com>");
|
||
|
MODULE_DESCRIPTION("Analog Devices ADP1653 LED flash driver");
|
||
|
MODULE_LICENSE("GPL");
|