428 lines
9.7 KiB
Plaintext
428 lines
9.7 KiB
Plaintext
|
/*
|
||
|
|
* Copyright 2014 Gateworks Corporation
|
||
|
|
*
|
||
|
|
* This file is dual-licensed: you can use it either under the terms
|
||
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
||
|
|
* licensing only applies to this file, and not this project as a
|
||
|
|
* whole.
|
||
|
|
*
|
||
|
|
* a) This file is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation; either version 2 of
|
||
|
|
* the License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This file is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public
|
||
|
|
* License along with this file; if not, write to the Free
|
||
|
|
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
||
|
|
* MA 02110-1301 USA
|
||
|
|
*
|
||
|
|
* Or, alternatively,
|
||
|
|
*
|
||
|
|
* b) Permission is hereby granted, free of charge, to any person
|
||
|
|
* obtaining a copy of this software and associated documentation
|
||
|
|
* files (the "Software"), to deal in the Software without
|
||
|
|
* restriction, including without limitation the rights to use,
|
||
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||
|
|
* sell copies of the Software, and to permit persons to whom the
|
||
|
|
* Software is furnished to do so, subject to the following
|
||
|
|
* conditions:
|
||
|
|
*
|
||
|
|
* The above copyright notice and this permission notice shall be
|
||
|
|
* included in all copies or substantial portions of the Software.
|
||
|
|
*
|
||
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <dt-bindings/gpio/gpio.h>
|
||
|
|
|
||
|
|
/ {
|
||
|
|
/* these are used by bootloader for disabling nodes */
|
||
|
|
aliases {
|
||
|
|
led0 = &led0;
|
||
|
|
nand = &gpmi;
|
||
|
|
ssi0 = &ssi1;
|
||
|
|
usb0 = &usbh1;
|
||
|
|
usb1 = &usbotg;
|
||
|
|
};
|
||
|
|
|
||
|
|
chosen {
|
||
|
|
bootargs = "console=ttymxc1,115200";
|
||
|
|
};
|
||
|
|
|
||
|
|
leds {
|
||
|
|
compatible = "gpio-leds";
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
||
|
|
|
||
|
|
led0: user1 {
|
||
|
|
label = "user1";
|
||
|
|
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
|
||
|
|
default-state = "on";
|
||
|
|
linux,default-trigger = "heartbeat";
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
memory@10000000 {
|
||
|
|
reg = <0x10000000 0x20000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_5p0v: regulator-5p0v {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "5P0V";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_usb_h1_vbus: regulator-usb-h1-vbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "usb_h1_vbus";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
};
|
||
|
|
|
||
|
|
reg_usb_otg_vbus: regulator-usb-otg-vbus {
|
||
|
|
compatible = "regulator-fixed";
|
||
|
|
regulator-name = "usb_otg_vbus";
|
||
|
|
regulator-min-microvolt = <5000000>;
|
||
|
|
regulator-max-microvolt = <5000000>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&can1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&gpmi {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&hdmi {
|
||
|
|
ddc-i2c-bus = <&i2c3>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
eeprom1: eeprom@50 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x50>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom2: eeprom@51 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x51>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom3: eeprom@52 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x52>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
eeprom4: eeprom@53 {
|
||
|
|
compatible = "atmel,24c02";
|
||
|
|
reg = <0x53>;
|
||
|
|
pagesize = <16>;
|
||
|
|
};
|
||
|
|
|
||
|
|
gpio: pca9555@23 {
|
||
|
|
compatible = "nxp,pca9555";
|
||
|
|
reg = <0x23>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
rtc: ds1672@68 {
|
||
|
|
compatible = "dallas,ds1672";
|
||
|
|
reg = <0x68>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c2 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
ltc3676: pmic@3c {
|
||
|
|
compatible = "lltc,ltc3676";
|
||
|
|
reg = <0x3c>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
||
|
|
interrupt-parent = <&gpio1>;
|
||
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
/* VDD_SOC (1+R1/R2 = 1.635) */
|
||
|
|
reg_vdd_soc: sw1 {
|
||
|
|
regulator-name = "vddsoc";
|
||
|
|
regulator-min-microvolt = <674400>;
|
||
|
|
regulator-max-microvolt = <1308000>;
|
||
|
|
lltc,fb-voltage-divider = <127000 200000>;
|
||
|
|
regulator-ramp-delay = <7000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_DDR (1+R1/R2 = 2.105) */
|
||
|
|
reg_vdd_ddr: sw2 {
|
||
|
|
regulator-name = "vddddr";
|
||
|
|
regulator-min-microvolt = <868310>;
|
||
|
|
regulator-max-microvolt = <1684000>;
|
||
|
|
lltc,fb-voltage-divider = <221000 200000>;
|
||
|
|
regulator-ramp-delay = <7000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_ARM (1+R1/R2 = 1.635) */
|
||
|
|
reg_vdd_arm: sw3 {
|
||
|
|
regulator-name = "vddarm";
|
||
|
|
regulator-min-microvolt = <674400>;
|
||
|
|
regulator-max-microvolt = <1308000>;
|
||
|
|
lltc,fb-voltage-divider = <127000 200000>;
|
||
|
|
regulator-ramp-delay = <7000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_3P3 (1+R1/R2 = 1.281) */
|
||
|
|
reg_3p3: sw4 {
|
||
|
|
regulator-name = "vdd3p3";
|
||
|
|
regulator-min-microvolt = <1880000>;
|
||
|
|
regulator-max-microvolt = <3647000>;
|
||
|
|
lltc,fb-voltage-divider = <200000 56200>;
|
||
|
|
regulator-ramp-delay = <7000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
|
||
|
|
reg_1p8a: ldo2 {
|
||
|
|
regulator-name = "vdd1p8a";
|
||
|
|
regulator-min-microvolt = <1816125>;
|
||
|
|
regulator-max-microvolt = <1816125>;
|
||
|
|
lltc,fb-voltage-divider = <301000 200000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_1P8b: HDMI In analog */
|
||
|
|
reg_1p8b: ldo3 {
|
||
|
|
regulator-name = "vdd1p8b";
|
||
|
|
regulator-min-microvolt = <1800000>;
|
||
|
|
regulator-max-microvolt = <1800000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
/* VDD_HIGH (1+R1/R2 = 4.17) */
|
||
|
|
reg_3p0: ldo4 {
|
||
|
|
regulator-name = "vdd3p0";
|
||
|
|
regulator-min-microvolt = <3023250>;
|
||
|
|
regulator-max-microvolt = <3023250>;
|
||
|
|
lltc,fb-voltage-divider = <634000 200000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
|
||
|
|
&i2c3 {
|
||
|
|
clock-frequency = <100000>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||
|
|
status = "okay";
|
||
|
|
|
||
|
|
gpio_exp: pca9555@24 {
|
||
|
|
compatible = "nxp,pca9555";
|
||
|
|
reg = <0x24>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
};
|
||
|
|
|
||
|
|
&pcie {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
||
|
|
reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&pwm3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
&ssi1 {
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart2 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&uart3 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbotg {
|
||
|
|
vbus-supply = <®_usb_otg_vbus>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
||
|
|
disable-over-current;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&usbh1 {
|
||
|
|
vbus-supply = <®_usb_h1_vbus>;
|
||
|
|
status = "okay";
|
||
|
|
};
|
||
|
|
|
||
|
|
&wdog1 {
|
||
|
|
pinctrl-names = "default";
|
||
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
||
|
|
fsl,ext-reset-output;
|
||
|
|
};
|
||
|
|
|
||
|
|
&iomuxc {
|
||
|
|
pinctrl_flexcan1: flexcan1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
|
||
|
|
MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
|
||
|
|
MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_gpmi_nand: gpminandgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
|
||
|
|
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
|
||
|
|
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
|
||
|
|
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
|
||
|
|
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c1: i2c1grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c2: i2c2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_i2c3: i2c3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
||
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pcie: pciegrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pmic: pmicgrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm2: pwm2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_pwm3: pwm3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart2: uart2grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_uart3: uart3grp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
|
||
|
|
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_usbotg: usbotggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
|
||
|
|
pinctrl_wdog: wdoggrp {
|
||
|
|
fsl,pins = <
|
||
|
|
MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|