535 lines
13 KiB
C
535 lines
13 KiB
C
|
/*
|
||
|
* AD5421 Digital to analog converters driver
|
||
|
*
|
||
|
* Copyright 2011 Analog Devices Inc.
|
||
|
*
|
||
|
* Licensed under the GPL-2.
|
||
|
*/
|
||
|
|
||
|
#include <linux/device.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/err.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/spi/spi.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/sysfs.h>
|
||
|
|
||
|
#include <linux/iio/iio.h>
|
||
|
#include <linux/iio/sysfs.h>
|
||
|
#include <linux/iio/events.h>
|
||
|
#include <linux/iio/dac/ad5421.h>
|
||
|
|
||
|
|
||
|
#define AD5421_REG_DAC_DATA 0x1
|
||
|
#define AD5421_REG_CTRL 0x2
|
||
|
#define AD5421_REG_OFFSET 0x3
|
||
|
#define AD5421_REG_GAIN 0x4
|
||
|
/* load dac and fault shared the same register number. Writing to it will cause
|
||
|
* a dac load command, reading from it will return the fault status register */
|
||
|
#define AD5421_REG_LOAD_DAC 0x5
|
||
|
#define AD5421_REG_FAULT 0x5
|
||
|
#define AD5421_REG_FORCE_ALARM_CURRENT 0x6
|
||
|
#define AD5421_REG_RESET 0x7
|
||
|
#define AD5421_REG_START_CONVERSION 0x8
|
||
|
#define AD5421_REG_NOOP 0x9
|
||
|
|
||
|
#define AD5421_CTRL_WATCHDOG_DISABLE BIT(12)
|
||
|
#define AD5421_CTRL_AUTO_FAULT_READBACK BIT(11)
|
||
|
#define AD5421_CTRL_MIN_CURRENT BIT(9)
|
||
|
#define AD5421_CTRL_ADC_SOURCE_TEMP BIT(8)
|
||
|
#define AD5421_CTRL_ADC_ENABLE BIT(7)
|
||
|
#define AD5421_CTRL_PWR_DOWN_INT_VREF BIT(6)
|
||
|
|
||
|
#define AD5421_FAULT_SPI BIT(15)
|
||
|
#define AD5421_FAULT_PEC BIT(14)
|
||
|
#define AD5421_FAULT_OVER_CURRENT BIT(13)
|
||
|
#define AD5421_FAULT_UNDER_CURRENT BIT(12)
|
||
|
#define AD5421_FAULT_TEMP_OVER_140 BIT(11)
|
||
|
#define AD5421_FAULT_TEMP_OVER_100 BIT(10)
|
||
|
#define AD5421_FAULT_UNDER_VOLTAGE_6V BIT(9)
|
||
|
#define AD5421_FAULT_UNDER_VOLTAGE_12V BIT(8)
|
||
|
|
||
|
/* These bits will cause the fault pin to go high */
|
||
|
#define AD5421_FAULT_TRIGGER_IRQ \
|
||
|
(AD5421_FAULT_SPI | AD5421_FAULT_PEC | AD5421_FAULT_OVER_CURRENT | \
|
||
|
AD5421_FAULT_UNDER_CURRENT | AD5421_FAULT_TEMP_OVER_140)
|
||
|
|
||
|
/**
|
||
|
* struct ad5421_state - driver instance specific data
|
||
|
* @spi: spi_device
|
||
|
* @ctrl: control register cache
|
||
|
* @current_range: current range which the device is configured for
|
||
|
* @data: spi transfer buffers
|
||
|
* @fault_mask: software masking of events
|
||
|
*/
|
||
|
struct ad5421_state {
|
||
|
struct spi_device *spi;
|
||
|
unsigned int ctrl;
|
||
|
enum ad5421_current_range current_range;
|
||
|
unsigned int fault_mask;
|
||
|
|
||
|
/*
|
||
|
* DMA (thus cache coherency maintenance) requires the
|
||
|
* transfer buffers to live in their own cache lines.
|
||
|
*/
|
||
|
union {
|
||
|
__be32 d32;
|
||
|
u8 d8[4];
|
||
|
} data[2] ____cacheline_aligned;
|
||
|
};
|
||
|
|
||
|
static const struct iio_event_spec ad5421_current_event[] = {
|
||
|
{
|
||
|
.type = IIO_EV_TYPE_THRESH,
|
||
|
.dir = IIO_EV_DIR_RISING,
|
||
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
||
|
BIT(IIO_EV_INFO_ENABLE),
|
||
|
}, {
|
||
|
.type = IIO_EV_TYPE_THRESH,
|
||
|
.dir = IIO_EV_DIR_FALLING,
|
||
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
||
|
BIT(IIO_EV_INFO_ENABLE),
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static const struct iio_event_spec ad5421_temp_event[] = {
|
||
|
{
|
||
|
.type = IIO_EV_TYPE_THRESH,
|
||
|
.dir = IIO_EV_DIR_RISING,
|
||
|
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
|
||
|
BIT(IIO_EV_INFO_ENABLE),
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static const struct iio_chan_spec ad5421_channels[] = {
|
||
|
{
|
||
|
.type = IIO_CURRENT,
|
||
|
.indexed = 1,
|
||
|
.output = 1,
|
||
|
.channel = 0,
|
||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||
|
BIT(IIO_CHAN_INFO_CALIBSCALE) |
|
||
|
BIT(IIO_CHAN_INFO_CALIBBIAS),
|
||
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
|
||
|
BIT(IIO_CHAN_INFO_OFFSET),
|
||
|
.scan_type = {
|
||
|
.sign = 'u',
|
||
|
.realbits = 16,
|
||
|
.storagebits = 16,
|
||
|
},
|
||
|
.event_spec = ad5421_current_event,
|
||
|
.num_event_specs = ARRAY_SIZE(ad5421_current_event),
|
||
|
},
|
||
|
{
|
||
|
.type = IIO_TEMP,
|
||
|
.channel = -1,
|
||
|
.event_spec = ad5421_temp_event,
|
||
|
.num_event_specs = ARRAY_SIZE(ad5421_temp_event),
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static int ad5421_write_unlocked(struct iio_dev *indio_dev,
|
||
|
unsigned int reg, unsigned int val)
|
||
|
{
|
||
|
struct ad5421_state *st = iio_priv(indio_dev);
|
||
|
|
||
|
st->data[0].d32 = cpu_to_be32((reg << 16) | val);
|
||
|
|
||
|
return spi_write(st->spi, &st->data[0].d8[1], 3);
|
||
|
}
|
||
|
|
||
|
static int ad5421_write(struct iio_dev *indio_dev, unsigned int reg,
|
||
|
unsigned int val)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
mutex_lock(&indio_dev->mlock);
|
||
|
ret = ad5421_write_unlocked(indio_dev, reg, val);
|
||
|
mutex_unlock(&indio_dev->mlock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ad5421_read(struct iio_dev *indio_dev, unsigned int reg)
|
||
|
{
|
||
|
struct ad5421_state *st = iio_priv(indio_dev);
|
||
|
int ret;
|
||
|
struct spi_transfer t[] = {
|
||
|
{
|
||
|
.tx_buf = &st->data[0].d8[1],
|
||
|
.len = 3,
|
||
|
.cs_change = 1,
|
||
|
}, {
|
||
|
.rx_buf = &st->data[1].d8[1],
|
||
|
.len = 3,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
mutex_lock(&indio_dev->mlock);
|
||
|
|
||
|
st->data[0].d32 = cpu_to_be32((1 << 23) | (reg << 16));
|
||
|
|
||
|
ret = spi_sync_transfer(st->spi, t, ARRAY_SIZE(t));
|
||
|
if (ret >= 0)
|
||
|
ret = be32_to_cpu(st->data[1].d32) & 0xffff;
|
||
|
|
||
|
mutex_unlock(&indio_dev->mlock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int ad5421_update_ctrl(struct iio_dev *indio_dev, unsigned int set,
|
||
|
unsigned int clr)
|
||
|
{
|
||
|
struct ad5421_state *st = iio_priv(indio_dev);
|
||
|
unsigned int ret;
|
||
|
|
||
|
mutex_lock(&indio_dev->mlock);
|
||
|
|
||
|
st->ctrl &= ~clr;
|
||
|
st->ctrl |= set;
|
||
|
|
||
|
ret = ad5421_write_unlocked(indio_dev, AD5421_REG_CTRL, st->ctrl);
|
||
|
|
||
|
mutex_unlock(&indio_dev->mlock);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static irqreturn_t ad5421_fault_handler(int irq, void *data)
|
||
|
{
|
||
|
struct iio_dev *indio_dev = data;
|
||
|
struct ad5421_state *st = iio_priv(indio_dev);
|
||
|
unsigned int fault;
|
||
|
unsigned int old_fault = 0;
|
||
|
unsigned int events;
|
||
|
|
||
|
fault = ad5421_read(indio_dev, AD5421_REG_FAULT);
|
||
|
if (!fault)
|
||
|
return IRQ_NONE;
|
||
|
|
||
|
/* If we had a fault, this might mean that the DAC has lost its state
|
||
|
* and has been reset. Make sure that the control register actually
|
||
|
* contains what we expect it to contain. Otherwise the watchdog might
|
||
|
* be enabled and we get watchdog timeout faults, which will render the
|
||
|
* DAC unusable. */
|
||
|
ad5421_update_ctrl(indio_dev, 0, 0);
|
||
|
|
||
|
|
||
|
/* The fault pin stays high as long as a fault condition is present and
|
||
|
* it is not possible to mask fault conditions. For certain fault
|
||
|
* conditions for example like over-temperature it takes some time
|
||
|
* until the fault condition disappears. If we would exit the interrupt
|
||
|
* handler immediately after handling the event it would be entered
|
||
|
* again instantly. Thus we fall back to polling in case we detect that
|
||
|
* a interrupt condition is still present.
|
||
|
*/
|
||
|
do {
|
||
|
/* 0xffff is a invalid value for the register and will only be
|
||
|
* read if there has been a communication error */
|
||
|
if (fault == 0xffff)
|
||
|
fault = 0;
|
||
|
|
||
|
/* we are only interested in new events */
|
||
|
events = (old_fault ^ fault) & fault;
|
||
|
events &= st->fault_mask;
|
||
|
|
||
|
if (events & AD5421_FAULT_OVER_CURRENT) {
|
||
|
iio_push_event(indio_dev,
|
||
|
IIO_UNMOD_EVENT_CODE(IIO_CURRENT,
|
||
|
0,
|
||
|
IIO_EV_TYPE_THRESH,
|
||
|
IIO_EV_DIR_RISING),
|
||
|
iio_get_time_ns(indio_dev));
|
||
|
}
|
||
|
|
||
|
if (events & AD5421_FAULT_UNDER_CURRENT) {
|
||
|
iio_push_event(indio_dev,
|
||
|
IIO_UNMOD_EVENT_CODE(IIO_CURRENT,
|
||
|
0,
|
||
|
IIO_EV_TYPE_THRESH,
|
||
|
IIO_EV_DIR_FALLING),
|
||
|
iio_get_time_ns(indio_dev));
|
||
|
}
|
||
|
|
||
|
if (events & AD5421_FAULT_TEMP_OVER_140) {
|
||
|
iio_push_event(indio_dev,
|
||
|
IIO_UNMOD_EVENT_CODE(IIO_TEMP,
|
||
|
0,
|
||
|
IIO_EV_TYPE_MAG,
|
||
|
IIO_EV_DIR_RISING),
|
||
|
iio_get_time_ns(indio_dev));
|
||
|
}
|
||
|
|
||
|
old_fault = fault;
|
||
|
fault = ad5421_read(indio_dev, AD5421_REG_FAULT);
|
||
|
|
||
|
/* still active? go to sleep for some time */
|
||
|
if (fault & AD5421_FAULT_TRIGGER_IRQ)
|
||
|
msleep(1000);
|
||
|
|
||
|
} while (fault & AD5421_FAULT_TRIGGER_IRQ);
|
||
|
|
||
|
|
||
|
return IRQ_HANDLED;
|
||
|
}
|
||
|
|
||
|
static void ad5421_get_current_min_max(struct ad5421_state *st,
|
||
|
unsigned int *min, unsigned int *max)
|
||
|
{
|
||
|
/* The current range is configured using external pins, which are
|
||
|
* usually hard-wired and not run-time switchable. */
|
||
|
switch (st->current_range) {
|
||
|
case AD5421_CURRENT_RANGE_4mA_20mA:
|
||
|
*min = 4000;
|
||
|
*max = 20000;
|
||
|
break;
|
||
|
case AD5421_CURRENT_RANGE_3mA8_21mA:
|
||
|
*min = 3800;
|
||
|
*max = 21000;
|
||
|
break;
|
||
|
case AD5421_CURRENT_RANGE_3mA2_24mA:
|
||
|
*min = 3200;
|
||
|
*max = 24000;
|
||
|
break;
|
||
|
default:
|
||
|
*min = 0;
|
||
|
*max = 1;
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static inline unsigned int ad5421_get_offset(struct ad5421_state *st)
|
||
|
{
|
||
|
unsigned int min, max;
|
||
|
|
||
|
ad5421_get_current_min_max(st, &min, &max);
|
||
|
return (min * (1 << 16)) / (max - min);
|
||
|
}
|
||
|
|
||
|
static int ad5421_read_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan, int *val, int *val2, long m)
|
||
|
{
|
||
|
struct ad5421_state *st = iio_priv(indio_dev);
|
||
|
unsigned int min, max;
|
||
|
int ret;
|
||
|
|
||
|
if (chan->type != IIO_CURRENT)
|
||
|
return -EINVAL;
|
||
|
|
||
|
switch (m) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
*val = ret;
|
||
|
return IIO_VAL_INT;
|
||
|
case IIO_CHAN_INFO_SCALE:
|
||
|
ad5421_get_current_min_max(st, &min, &max);
|
||
|
*val = max - min;
|
||
|
*val2 = (1 << 16) * 1000;
|
||
|
return IIO_VAL_FRACTIONAL;
|
||
|
case IIO_CHAN_INFO_OFFSET:
|
||
|
*val = ad5421_get_offset(st);
|
||
|
return IIO_VAL_INT;
|
||
|
case IIO_CHAN_INFO_CALIBBIAS:
|
||
|
ret = ad5421_read(indio_dev, AD5421_REG_OFFSET);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
*val = ret - 32768;
|
||
|
return IIO_VAL_INT;
|
||
|
case IIO_CHAN_INFO_CALIBSCALE:
|
||
|
ret = ad5421_read(indio_dev, AD5421_REG_GAIN);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
*val = ret;
|
||
|
return IIO_VAL_INT;
|
||
|
}
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int ad5421_write_raw(struct iio_dev *indio_dev,
|
||
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
||
|
{
|
||
|
const unsigned int max_val = 1 << 16;
|
||
|
|
||
|
switch (mask) {
|
||
|
case IIO_CHAN_INFO_RAW:
|
||
|
if (val >= max_val || val < 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
return ad5421_write(indio_dev, AD5421_REG_DAC_DATA, val);
|
||
|
case IIO_CHAN_INFO_CALIBBIAS:
|
||
|
val += 32768;
|
||
|
if (val >= max_val || val < 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
return ad5421_write(indio_dev, AD5421_REG_OFFSET, val);
|
||
|
case IIO_CHAN_INFO_CALIBSCALE:
|
||
|
if (val >= max_val || val < 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
return ad5421_write(indio_dev, AD5421_REG_GAIN, val);
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int ad5421_write_event_config(struct iio_dev *indio_dev,
|
||
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
||
|
enum iio_event_direction dir, int state)
|
||
|
{
|
||
|
struct ad5421_state *st = iio_priv(indio_dev);
|
||
|
unsigned int mask;
|
||
|
|
||
|
switch (chan->type) {
|
||
|
case IIO_CURRENT:
|
||
|
if (dir == IIO_EV_DIR_RISING)
|
||
|
mask = AD5421_FAULT_OVER_CURRENT;
|
||
|
else
|
||
|
mask = AD5421_FAULT_UNDER_CURRENT;
|
||
|
break;
|
||
|
case IIO_TEMP:
|
||
|
mask = AD5421_FAULT_TEMP_OVER_140;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
mutex_lock(&indio_dev->mlock);
|
||
|
if (state)
|
||
|
st->fault_mask |= mask;
|
||
|
else
|
||
|
st->fault_mask &= ~mask;
|
||
|
mutex_unlock(&indio_dev->mlock);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int ad5421_read_event_config(struct iio_dev *indio_dev,
|
||
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
||
|
enum iio_event_direction dir)
|
||
|
{
|
||
|
struct ad5421_state *st = iio_priv(indio_dev);
|
||
|
unsigned int mask;
|
||
|
|
||
|
switch (chan->type) {
|
||
|
case IIO_CURRENT:
|
||
|
if (dir == IIO_EV_DIR_RISING)
|
||
|
mask = AD5421_FAULT_OVER_CURRENT;
|
||
|
else
|
||
|
mask = AD5421_FAULT_UNDER_CURRENT;
|
||
|
break;
|
||
|
case IIO_TEMP:
|
||
|
mask = AD5421_FAULT_TEMP_OVER_140;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return (bool)(st->fault_mask & mask);
|
||
|
}
|
||
|
|
||
|
static int ad5421_read_event_value(struct iio_dev *indio_dev,
|
||
|
const struct iio_chan_spec *chan, enum iio_event_type type,
|
||
|
enum iio_event_direction dir, enum iio_event_info info, int *val,
|
||
|
int *val2)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
switch (chan->type) {
|
||
|
case IIO_CURRENT:
|
||
|
ret = ad5421_read(indio_dev, AD5421_REG_DAC_DATA);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
*val = ret;
|
||
|
break;
|
||
|
case IIO_TEMP:
|
||
|
*val = 140000;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return IIO_VAL_INT;
|
||
|
}
|
||
|
|
||
|
static const struct iio_info ad5421_info = {
|
||
|
.read_raw = ad5421_read_raw,
|
||
|
.write_raw = ad5421_write_raw,
|
||
|
.read_event_config = ad5421_read_event_config,
|
||
|
.write_event_config = ad5421_write_event_config,
|
||
|
.read_event_value = ad5421_read_event_value,
|
||
|
};
|
||
|
|
||
|
static int ad5421_probe(struct spi_device *spi)
|
||
|
{
|
||
|
struct ad5421_platform_data *pdata = dev_get_platdata(&spi->dev);
|
||
|
struct iio_dev *indio_dev;
|
||
|
struct ad5421_state *st;
|
||
|
int ret;
|
||
|
|
||
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
||
|
if (indio_dev == NULL) {
|
||
|
dev_err(&spi->dev, "Failed to allocate iio device\n");
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
st = iio_priv(indio_dev);
|
||
|
spi_set_drvdata(spi, indio_dev);
|
||
|
|
||
|
st->spi = spi;
|
||
|
|
||
|
indio_dev->dev.parent = &spi->dev;
|
||
|
indio_dev->name = "ad5421";
|
||
|
indio_dev->info = &ad5421_info;
|
||
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
||
|
indio_dev->channels = ad5421_channels;
|
||
|
indio_dev->num_channels = ARRAY_SIZE(ad5421_channels);
|
||
|
|
||
|
st->ctrl = AD5421_CTRL_WATCHDOG_DISABLE |
|
||
|
AD5421_CTRL_AUTO_FAULT_READBACK;
|
||
|
|
||
|
if (pdata) {
|
||
|
st->current_range = pdata->current_range;
|
||
|
if (pdata->external_vref)
|
||
|
st->ctrl |= AD5421_CTRL_PWR_DOWN_INT_VREF;
|
||
|
} else {
|
||
|
st->current_range = AD5421_CURRENT_RANGE_4mA_20mA;
|
||
|
}
|
||
|
|
||
|
/* write initial ctrl register value */
|
||
|
ad5421_update_ctrl(indio_dev, 0, 0);
|
||
|
|
||
|
if (spi->irq) {
|
||
|
ret = devm_request_threaded_irq(&spi->dev, spi->irq,
|
||
|
NULL,
|
||
|
ad5421_fault_handler,
|
||
|
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
|
||
|
"ad5421 fault",
|
||
|
indio_dev);
|
||
|
if (ret)
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
return devm_iio_device_register(&spi->dev, indio_dev);
|
||
|
}
|
||
|
|
||
|
static struct spi_driver ad5421_driver = {
|
||
|
.driver = {
|
||
|
.name = "ad5421",
|
||
|
},
|
||
|
.probe = ad5421_probe,
|
||
|
};
|
||
|
module_spi_driver(ad5421_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
||
|
MODULE_DESCRIPTION("Analog Devices AD5421 DAC");
|
||
|
MODULE_LICENSE("GPL v2");
|
||
|
MODULE_ALIAS("spi:ad5421");
|