263 lines
9.5 KiB
Plaintext
263 lines
9.5 KiB
Plaintext
|
AXP family PMIC device tree bindings
|
||
|
|
|
||
|
|
The axp20x family current members :
|
||
|
|
axp152 (X-Powers)
|
||
|
|
axp202 (X-Powers)
|
||
|
|
axp209 (X-Powers)
|
||
|
|
axp221 (X-Powers)
|
||
|
|
axp223 (X-Powers)
|
||
|
|
axp803 (X-Powers)
|
||
|
|
axp806 (X-Powers)
|
||
|
|
axp809 (X-Powers)
|
||
|
|
axp813 (X-Powers)
|
||
|
|
|
||
|
|
The AXP813 is 2 chips packaged into 1. The 2 chips do not share anything
|
||
|
|
other than the packaging. Pins are routed separately. As such they should
|
||
|
|
be treated as separate entities. The other half is an AC100 RTC/codec
|
||
|
|
combo chip. Please see ./ac100.txt for its bindings.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: should be one of:
|
||
|
|
* "x-powers,axp152"
|
||
|
|
* "x-powers,axp202"
|
||
|
|
* "x-powers,axp209"
|
||
|
|
* "x-powers,axp221"
|
||
|
|
* "x-powers,axp223"
|
||
|
|
* "x-powers,axp803"
|
||
|
|
* "x-powers,axp806"
|
||
|
|
* "x-powers,axp809"
|
||
|
|
* "x-powers,axp813"
|
||
|
|
- reg: The I2C slave address or RSB hardware address for the AXP chip
|
||
|
|
- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
|
||
|
|
- interrupt-controller: The PMIC has its own internal IRQs
|
||
|
|
- #interrupt-cells: Should be set to 1
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
|
||
|
|
AXP152/20X: range: 750-1875, Default: 1.5 MHz
|
||
|
|
AXP22X/8XX: range: 1800-4050, Default: 3 MHz
|
||
|
|
|
||
|
|
- x-powers,drive-vbus-en: boolean, set this when the N_VBUSEN pin is
|
||
|
|
used as an output pin to control an external
|
||
|
|
regulator to drive the OTG VBus, rather then
|
||
|
|
as an input pin which signals whether the
|
||
|
|
board is driving OTG VBus or not.
|
||
|
|
(axp221 / axp223 / axp803/ axp813 only)
|
||
|
|
|
||
|
|
- x-powers,self-working-mode and
|
||
|
|
x-powers,master-mode: Boolean (axp806 only). Set either of these when the
|
||
|
|
PMIC is wired for self-working mode or master mode.
|
||
|
|
If neither is set then slave mode is assumed.
|
||
|
|
This corresponds to how the MODESET pin is wired.
|
||
|
|
|
||
|
|
- <input>-supply: a phandle to the regulator supply node. May be omitted if
|
||
|
|
inputs are unregulated, such as using the IPSOUT output
|
||
|
|
from the PMIC.
|
||
|
|
|
||
|
|
- regulators: A node that houses a sub-node for each regulator. Regulators
|
||
|
|
not used but preferred to be managed by the OS should be
|
||
|
|
listed as well.
|
||
|
|
See Documentation/devicetree/bindings/regulator/regulator.txt
|
||
|
|
for more information on standard regulator bindings.
|
||
|
|
|
||
|
|
Optional properties for DCDC regulators:
|
||
|
|
- x-powers,dcdc-workmode: 1 for PWM mode, 0 for AUTO (PWM/PFM) mode
|
||
|
|
Default: Current hardware setting
|
||
|
|
The DCDC regulators work in a mixed PWM/PFM mode,
|
||
|
|
using PFM under light loads and switching to PWM
|
||
|
|
for heavier loads. Forcing PWM mode trades efficiency
|
||
|
|
under light loads for lower output noise. This
|
||
|
|
probably makes sense for HiFi audio related
|
||
|
|
applications that aren't battery constrained.
|
||
|
|
|
||
|
|
AXP202/AXP209 regulators, type, and corresponding input supply names:
|
||
|
|
|
||
|
|
Regulator Type Supply Name Notes
|
||
|
|
--------- ---- ----------- -----
|
||
|
|
DCDC2 : DC-DC buck : vin2-supply
|
||
|
|
DCDC3 : DC-DC buck : vin3-supply
|
||
|
|
LDO1 : LDO : acin-supply : always on
|
||
|
|
LDO2 : LDO : ldo24in-supply : shared supply
|
||
|
|
LDO3 : LDO : ldo3in-supply
|
||
|
|
LDO4 : LDO : ldo24in-supply : shared supply
|
||
|
|
LDO5 : LDO : ldo5in-supply
|
||
|
|
|
||
|
|
AXP221/AXP223 regulators, type, and corresponding input supply names:
|
||
|
|
|
||
|
|
Regulator Type Supply Name Notes
|
||
|
|
--------- ---- ----------- -----
|
||
|
|
DCDC1 : DC-DC buck : vin1-supply
|
||
|
|
DCDC2 : DC-DC buck : vin2-supply
|
||
|
|
DCDC3 : DC-DC buck : vin3-supply
|
||
|
|
DCDC4 : DC-DC buck : vin4-supply
|
||
|
|
DCDC5 : DC-DC buck : vin5-supply
|
||
|
|
DC1SW : On/Off Switch : : DCDC1 secondary output
|
||
|
|
DC5LDO : LDO : : input from DCDC5
|
||
|
|
ALDO1 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO2 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO3 : LDO : aldoin-supply : shared supply
|
||
|
|
DLDO1 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO2 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO3 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO4 : LDO : dldoin-supply : shared supply
|
||
|
|
ELDO1 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO2 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO3 : LDO : eldoin-supply : shared supply
|
||
|
|
LDO_IO0 : LDO : ips-supply : GPIO 0
|
||
|
|
LDO_IO1 : LDO : ips-supply : GPIO 1
|
||
|
|
RTC_LDO : LDO : ips-supply : always on
|
||
|
|
DRIVEVBUS : Enable output : drivevbus-supply : external regulator
|
||
|
|
|
||
|
|
AXP803 regulators, type, and corresponding input supply names:
|
||
|
|
|
||
|
|
Regulator Type Supply Name Notes
|
||
|
|
--------- ---- ----------- -----
|
||
|
|
DCDC1 : DC-DC buck : vin1-supply
|
||
|
|
DCDC2 : DC-DC buck : vin2-supply : poly-phase capable
|
||
|
|
DCDC3 : DC-DC buck : vin3-supply : poly-phase capable
|
||
|
|
DCDC4 : DC-DC buck : vin4-supply
|
||
|
|
DCDC5 : DC-DC buck : vin5-supply : poly-phase capable
|
||
|
|
DCDC6 : DC-DC buck : vin6-supply : poly-phase capable
|
||
|
|
DC1SW : On/Off Switch : : DCDC1 secondary output
|
||
|
|
ALDO1 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO2 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO3 : LDO : aldoin-supply : shared supply
|
||
|
|
DLDO1 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO2 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO3 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO4 : LDO : dldoin-supply : shared supply
|
||
|
|
ELDO1 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO2 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO3 : LDO : eldoin-supply : shared supply
|
||
|
|
FLDO1 : LDO : fldoin-supply : shared supply
|
||
|
|
FLDO2 : LDO : fldoin-supply : shared supply
|
||
|
|
LDO_IO0 : LDO : ips-supply : GPIO 0
|
||
|
|
LDO_IO1 : LDO : ips-supply : GPIO 1
|
||
|
|
RTC_LDO : LDO : ips-supply : always on
|
||
|
|
DRIVEVBUS : Enable output : drivevbus-supply : external regulator
|
||
|
|
|
||
|
|
AXP806 regulators, type, and corresponding input supply names:
|
||
|
|
|
||
|
|
Regulator Type Supply Name Notes
|
||
|
|
--------- ---- ----------- -----
|
||
|
|
DCDCA : DC-DC buck : vina-supply : poly-phase capable
|
||
|
|
DCDCB : DC-DC buck : vinb-supply : poly-phase capable
|
||
|
|
DCDCC : DC-DC buck : vinc-supply : poly-phase capable
|
||
|
|
DCDCD : DC-DC buck : vind-supply : poly-phase capable
|
||
|
|
DCDCE : DC-DC buck : vine-supply : poly-phase capable
|
||
|
|
ALDO1 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO2 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO3 : LDO : aldoin-supply : shared supply
|
||
|
|
BLDO1 : LDO : bldoin-supply : shared supply
|
||
|
|
BLDO2 : LDO : bldoin-supply : shared supply
|
||
|
|
BLDO3 : LDO : bldoin-supply : shared supply
|
||
|
|
BLDO4 : LDO : bldoin-supply : shared supply
|
||
|
|
CLDO1 : LDO : cldoin-supply : shared supply
|
||
|
|
CLDO2 : LDO : cldoin-supply : shared supply
|
||
|
|
CLDO3 : LDO : cldoin-supply : shared supply
|
||
|
|
SW : On/Off Switch : swin-supply
|
||
|
|
|
||
|
|
Additionally, the AXP806 DC-DC regulators support poly-phase arrangements
|
||
|
|
for higher output current. The possible groupings are: A+B, A+B+C, D+E.
|
||
|
|
|
||
|
|
AXP809 regulators, type, and corresponding input supply names:
|
||
|
|
|
||
|
|
Regulator Type Supply Name Notes
|
||
|
|
--------- ---- ----------- -----
|
||
|
|
DCDC1 : DC-DC buck : vin1-supply
|
||
|
|
DCDC2 : DC-DC buck : vin2-supply
|
||
|
|
DCDC3 : DC-DC buck : vin3-supply
|
||
|
|
DCDC4 : DC-DC buck : vin4-supply
|
||
|
|
DCDC5 : DC-DC buck : vin5-supply
|
||
|
|
DC1SW : On/Off Switch : : DCDC1 secondary output
|
||
|
|
DC5LDO : LDO : : input from DCDC5
|
||
|
|
ALDO1 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO2 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO3 : LDO : aldoin-supply : shared supply
|
||
|
|
DLDO1 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO2 : LDO : dldoin-supply : shared supply
|
||
|
|
ELDO1 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO2 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO3 : LDO : eldoin-supply : shared supply
|
||
|
|
LDO_IO0 : LDO : ips-supply : GPIO 0
|
||
|
|
LDO_IO1 : LDO : ips-supply : GPIO 1
|
||
|
|
RTC_LDO : LDO : ips-supply : always on
|
||
|
|
SW : On/Off Switch : swin-supply
|
||
|
|
|
||
|
|
AXP813 regulators, type, and corresponding input supply names:
|
||
|
|
|
||
|
|
Regulator Type Supply Name Notes
|
||
|
|
--------- ---- ----------- -----
|
||
|
|
DCDC1 : DC-DC buck : vin1-supply
|
||
|
|
DCDC2 : DC-DC buck : vin2-supply : poly-phase capable
|
||
|
|
DCDC3 : DC-DC buck : vin3-supply : poly-phase capable
|
||
|
|
DCDC4 : DC-DC buck : vin4-supply
|
||
|
|
DCDC5 : DC-DC buck : vin5-supply : poly-phase capable
|
||
|
|
DCDC6 : DC-DC buck : vin6-supply : poly-phase capable
|
||
|
|
DCDC7 : DC-DC buck : vin7-supply
|
||
|
|
ALDO1 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO2 : LDO : aldoin-supply : shared supply
|
||
|
|
ALDO3 : LDO : aldoin-supply : shared supply
|
||
|
|
DLDO1 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO2 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO3 : LDO : dldoin-supply : shared supply
|
||
|
|
DLDO4 : LDO : dldoin-supply : shared supply
|
||
|
|
ELDO1 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO2 : LDO : eldoin-supply : shared supply
|
||
|
|
ELDO3 : LDO : eldoin-supply : shared supply
|
||
|
|
FLDO1 : LDO : fldoin-supply : shared supply
|
||
|
|
FLDO2 : LDO : fldoin-supply : shared supply
|
||
|
|
FLDO3 : LDO : fldoin-supply : shared supply
|
||
|
|
LDO_IO0 : LDO : ips-supply : GPIO 0
|
||
|
|
LDO_IO1 : LDO : ips-supply : GPIO 1
|
||
|
|
RTC_LDO : LDO : ips-supply : always on
|
||
|
|
SW : On/Off Switch : swin-supply
|
||
|
|
DRIVEVBUS : Enable output : drivevbus-supply : external regulator
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
axp209: pmic@34 {
|
||
|
|
compatible = "x-powers,axp209";
|
||
|
|
reg = <0x34>;
|
||
|
|
interrupt-parent = <&nmi_intc>;
|
||
|
|
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||
|
|
interrupt-controller;
|
||
|
|
#interrupt-cells = <1>;
|
||
|
|
|
||
|
|
regulators {
|
||
|
|
x-powers,dcdc-freq = <1500>;
|
||
|
|
|
||
|
|
vdd_cpu: dcdc2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1450000>;
|
||
|
|
regulator-name = "vdd-cpu";
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_int_dll: dcdc3 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-min-microvolt = <1000000>;
|
||
|
|
regulator-max-microvolt = <1400000>;
|
||
|
|
regulator-name = "vdd-int-dll";
|
||
|
|
};
|
||
|
|
|
||
|
|
vdd_rtc: ldo1 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-min-microvolt = <1200000>;
|
||
|
|
regulator-max-microvolt = <1400000>;
|
||
|
|
regulator-name = "vdd-rtc";
|
||
|
|
};
|
||
|
|
|
||
|
|
avcc: ldo2 {
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-min-microvolt = <2700000>;
|
||
|
|
regulator-max-microvolt = <3300000>;
|
||
|
|
regulator-name = "avcc";
|
||
|
|
};
|
||
|
|
|
||
|
|
ldo3 {
|
||
|
|
/* unused but preferred to be managed by OS */
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|