kernel_samsung_a34x-permissive/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (C) 2016 Marvell Technology Group Ltd.
 *
 * Device Tree file for MACCHIATOBin Armada 8040 community board platform
 */

#include "armada-8040.dtsi"

#include <dt-bindings/gpio/gpio.h>

/ {
	model = "Marvell 8040 MACCHIATOBin";
	compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
			"marvell,armada-ap806-quad", "marvell,armada-ap806";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	memory@0 {
		device_type = "memory";
		reg = <0x0 0x0 0x0 0x80000000>;
	};

	aliases {
		ethernet0 = &cp0_eth0;
		ethernet1 = &cp1_eth0;
		ethernet2 = &cp1_eth1;
		ethernet3 = &cp1_eth2;
	};

	/* Regulator labels correspond with schematics */
	v_3_3: regulator-3-3v {
		compatible = "regulator-fixed";
		regulator-name = "v_3_3";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-always-on;
		status = "okay";
	};

	v_vddo_h: regulator-1-8v {
		compatible = "regulator-fixed";
		regulator-name = "v_vddo_h";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		regulator-always-on;
		status = "okay";
	};

	v_5v0_usb3_hst_vbus: regulator-usb3-vbus0 {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&cp0_gpio2 15 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&cp0_xhci_vbus_pins>;
		regulator-name = "v_5v0_usb3_hst_vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		status = "okay";
	};

	usb3h0_phy: usb3_phy0 {
		compatible = "usb-nop-xceiv";
		vcc-supply = <&v_5v0_usb3_hst_vbus>;
	};

	sfp_eth0: sfp-eth0 {
		/* CON15,16 - CPM lane 4 */
		compatible = "sff,sfp";
		i2c-bus = <&sfpp0_i2c>;
		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&cp1_sfpp0_pins>;
	};

	sfp_eth1: sfp-eth1 {
		/* CON17,18 - CPS lane 4 */
		compatible = "sff,sfp";
		i2c-bus = <&sfpp1_i2c>;
		los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
		mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
		tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
	};

	sfp_eth3: sfp-eth3 {
		/* CON13,14 - CPS lane 5 */
		compatible = "sff,sfp";
		i2c-bus = <&sfp_1g_i2c>;
		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
		mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
		tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
	};
};

&uart0 {
	status = "okay";
	pinctrl-0 = <&uart0_pins>;
	pinctrl-names = "default";
};

&ap_sdhci0 {
	bus-width = <8>;
	/*
	 * Not stable in HS modes - phy needs "more calibration", so add
	 * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
	 */
	marvell,xenon-phy-slow-mode;
	no-1-8-v;
	no-sd;
	no-sdio;
	non-removable;
	status = "okay";
	vqmmc-supply = <&v_vddo_h>;
};

&cp0_i2c0 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_i2c0_pins>;
	status = "okay";
};

&cp0_i2c1 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_i2c1_pins>;
	status = "okay";

	i2c-switch@70 {
		compatible = "nxp,pca9548";
		#address-cells = <1>;
		#size-cells = <0>;
		reg = <0x70>;

		sfpp0_i2c: i2c@0 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0>;
		};
		sfpp1_i2c: i2c@1 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <1>;
		};
		sfp_1g_i2c: i2c@2 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2>;
		};
	};
};

/* J25 UART header */
&cp0_uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_uart1_pins>;
	status = "okay";
};

&cp0_mdio {
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_ge_mdio_pins>;
	status = "okay";

	ge_phy: ethernet-phy@0 {
		reg = <0>;
	};
};

&cp0_pcie0 {
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_pcie_pins>;
	num-lanes = <4>;
	num-viewport = <8>;
	reset-gpio = <&cp0_gpio1 20 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&cp0_pinctrl {
	cp0_ge_mdio_pins: ge-mdio-pins {
		marvell,pins = "mpp32", "mpp34";
		marvell,function = "ge";
	};
	cp0_i2c1_pins: i2c1-pins {
		marvell,pins = "mpp35", "mpp36";
		marvell,function = "i2c1";
	};
	cp0_i2c0_pins: i2c0-pins {
		marvell,pins = "mpp37", "mpp38";
		marvell,function = "i2c0";
	};
	cp0_uart1_pins: uart1-pins {
		marvell,pins = "mpp40", "mpp41";
		marvell,function = "uart1";
	};
	cp0_xhci_vbus_pins: xhci0-vbus-pins {
		marvell,pins = "mpp47";
		marvell,function = "gpio";
	};
	cp0_sfp_1g_pins: sfp-1g-pins {
		marvell,pins = "mpp51", "mpp53", "mpp54";
		marvell,function = "gpio";
	};
	cp0_pcie_pins: pcie-pins {
		marvell,pins = "mpp52";
		marvell,function = "gpio";
	};
	cp0_sdhci_pins: sdhci-pins {
		marvell,pins = "mpp55", "mpp56", "mpp57", "mpp58", "mpp59",
			       "mpp60", "mpp61";
		marvell,function = "sdio";
	};
	cp0_sfpp1_pins: sfpp1-pins {
		marvell,pins = "mpp62";
		marvell,function = "gpio";
	};
};

&cp0_xmdio {
	status = "okay";

	phy0: ethernet-phy@0 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <0>;
		sfp = <&sfp_eth0>;
	};

	phy8: ethernet-phy@8 {
		compatible = "ethernet-phy-ieee802.3-c45";
		reg = <8>;
		sfp = <&sfp_eth1>;
	};
};

&cp0_ethernet {
	status = "okay";
};

&cp0_eth0 {
	status = "okay";
	/* Network PHY */
	phy = <&phy0>;
	phy-mode = "10gbase-kr";
	/* Generic PHY, providing serdes lanes */
	phys = <&cp0_comphy4 0>;
};

&cp0_sata0 {
	/* CPM Lane 0 - U29 */
	status = "okay";
};

&cp0_sdhci0 {
	/* U6 */
	broken-cd;
	bus-width = <4>;
	pinctrl-names = "default";
	pinctrl-0 = <&cp0_sdhci_pins>;
	status = "okay";
	vqmmc-supply = <&v_3_3>;
};

&cp0_usb3_0 {
	/* J38? - USB2.0 only */
	status = "okay";
};

&cp0_usb3_1 {
	/* J38? - USB2.0 only */
	status = "okay";
};

&cp1_ethernet {
	status = "okay";
};

&cp1_eth0 {
	status = "okay";
	/* Network PHY */
	phy = <&phy8>;
	phy-mode = "10gbase-kr";
	/* Generic PHY, providing serdes lanes */
	phys = <&cp1_comphy4 0>;
};

&cp1_eth1 {
	/* CPS Lane 0 - J5 (Gigabit RJ45) */
	status = "okay";
	/* Network PHY */
	phy = <&ge_phy>;
	phy-mode = "sgmii";
	/* Generic PHY, providing serdes lanes */
	phys = <&cp1_comphy0 1>;
};

&cp1_eth2 {
	/* CPS Lane 5 */
	status = "okay";
	/* Network PHY */
	phy-mode = "2500base-x";
	managed = "in-band-status";
	/* Generic PHY, providing serdes lanes */
	phys = <&cp1_comphy5 2>;
	sfp = <&sfp_eth3>;
};

&cp1_pinctrl {
	cp1_sfpp1_pins: sfpp1-pins {
		marvell,pins = "mpp8", "mpp10", "mpp11";
		marvell,function = "gpio";
	};
	cp1_spi1_pins: spi1-pins {
		marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
		marvell,function = "spi1";
	};
	cp1_uart0_pins: uart0-pins {
		marvell,pins = "mpp6", "mpp7";
		marvell,function = "uart0";
	};
	cp1_sfp_1g_pins: sfp-1g-pins {
		marvell,pins = "mpp24";
		marvell,function = "gpio";
	};
	cp1_sfpp0_pins: sfpp0-pins {
		marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
		marvell,function = "gpio";
	};
};

/* J27 UART header */
&cp1_uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&cp1_uart0_pins>;
	status = "okay";
};

&cp1_sata0 {
	/* CPS Lane 1 - U32 */
	/* CPS Lane 3 - U31 */
	status = "okay";
};

&cp1_spi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&cp1_spi1_pins>;
	status = "okay";

	spi-flash@0 {
		compatible = "st,w25q32";
		spi-max-frequency = <50000000>;
		reg = <0>;
	};
};

&cp1_usb3_0 {
	/* CPS Lane 2 - CON7 */
	usb-phy = <&usb3h0_phy>;
	status = "okay";
};