823 lines
22 KiB
C
823 lines
22 KiB
C
|
/*
|
||
|
* Copyright (c) 2015 MediaTek Inc.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
* published by the Free Software Foundation.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*/
|
||
|
|
||
|
#include <linux/backlight.h>
|
||
|
#include <drm/drmP.h>
|
||
|
#include <drm/drm_mipi_dsi.h>
|
||
|
#include <drm/drm_panel.h>
|
||
|
|
||
|
#include <linux/gpio/consumer.h>
|
||
|
#include <linux/regulator/consumer.h>
|
||
|
|
||
|
#include <video/mipi_display.h>
|
||
|
#include <video/of_videomode.h>
|
||
|
#include <video/videomode.h>
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/of_platform.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
|
||
|
#define CONFIG_MTK_PANEL_EXT
|
||
|
#if defined(CONFIG_MTK_PANEL_EXT)
|
||
|
#include "../mediatek/mtk_panel_ext.h"
|
||
|
#include "../mediatek/mtk_log.h"
|
||
|
#include "../mediatek/mtk_drm_graphics_base.h"
|
||
|
#endif
|
||
|
|
||
|
#ifdef CONFIG_MTK_ROUND_CORNER_SUPPORT
|
||
|
#include "../mediatek/mtk_corner_pattern/mtk_data_hw_roundedpattern.h"
|
||
|
#endif
|
||
|
|
||
|
#define ENABLE_MTK_LCD_DTS_CHECK_NVT
|
||
|
/*******************************************************/
|
||
|
/* Backlight Function */
|
||
|
/* Device Name : LM36274 */
|
||
|
/* Interface : I2C */
|
||
|
/* Enable Mode : 1 PIN for 5P9, 5N9 */
|
||
|
/*******************************************************/
|
||
|
#include <linux/i2c-dev.h>
|
||
|
#include <linux/i2c.h>
|
||
|
|
||
|
#define LCM_I2C_COMPATIBLE "mediatek,i2c_lcd_bias"
|
||
|
#define LCM_I2C_ID_NAME "hx83102d_lm36274"
|
||
|
|
||
|
static struct i2c_client *_lcm_i2c_client;
|
||
|
|
||
|
/*****************************************************************************
|
||
|
* Function Prototype
|
||
|
*****************************************************************************/
|
||
|
static int _lcm_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id);
|
||
|
static int _lcm_i2c_remove(struct i2c_client *client);
|
||
|
static int _lcm_i2c_write_bytes(unsigned char addr, unsigned char value);
|
||
|
|
||
|
/*****************************************************************************
|
||
|
* Data Structure
|
||
|
*****************************************************************************/
|
||
|
struct _lcm_i2c_dev {
|
||
|
struct i2c_client *client;
|
||
|
};
|
||
|
|
||
|
static const struct of_device_id _lcm_i2c_of_match[] = {
|
||
|
{ .compatible = LCM_I2C_COMPATIBLE, },
|
||
|
{},
|
||
|
};
|
||
|
|
||
|
static const struct i2c_device_id _lcm_i2c_id[] = {
|
||
|
{ LCM_I2C_ID_NAME, 0 },
|
||
|
{},
|
||
|
};
|
||
|
|
||
|
static struct i2c_driver _lcm_i2c_driver = {
|
||
|
.id_table = _lcm_i2c_id,
|
||
|
.probe = _lcm_i2c_probe,
|
||
|
.remove = _lcm_i2c_remove,
|
||
|
.driver = {
|
||
|
.owner = THIS_MODULE,
|
||
|
.name = LCM_I2C_ID_NAME,
|
||
|
.of_match_table = _lcm_i2c_of_match,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
/*****************************************************************************
|
||
|
* Device Control Function
|
||
|
*****************************************************************************/
|
||
|
|
||
|
static void _lm36274_init(void)
|
||
|
{
|
||
|
_lcm_i2c_write_bytes(0x0C, 0x2C);
|
||
|
_lcm_i2c_write_bytes(0x0D, 0x26);
|
||
|
_lcm_i2c_write_bytes(0x0E, 0x26);
|
||
|
_lcm_i2c_write_bytes(0x09, 0xBE);
|
||
|
_lcm_i2c_write_bytes(0x02, 0x6B);
|
||
|
_lcm_i2c_write_bytes(0x03, 0x0D);
|
||
|
_lcm_i2c_write_bytes(0x11, 0x74);
|
||
|
_lcm_i2c_write_bytes(0x04, 0x05);
|
||
|
_lcm_i2c_write_bytes(0x05, 0xCC);
|
||
|
_lcm_i2c_write_bytes(0x10, 0x67);
|
||
|
_lcm_i2c_write_bytes(0x08, 0x13);
|
||
|
|
||
|
msleep(2);
|
||
|
}
|
||
|
|
||
|
/*****************************************************************************
|
||
|
* I2C Interface Function
|
||
|
*****************************************************************************/
|
||
|
static int _lcm_i2c_probe(struct i2c_client *client,
|
||
|
const struct i2c_device_id *id)
|
||
|
{
|
||
|
struct device_node *lcd_comp;
|
||
|
int ret;
|
||
|
|
||
|
pr_debug("[LCM][I2C][hx83102d] %s\n", __func__);
|
||
|
pr_debug("[LCM][I2C][hx83102d] HX: info==>name=%s addr=0x%x\n", client->name,
|
||
|
client->addr);
|
||
|
_lcm_i2c_client = client;
|
||
|
|
||
|
#ifdef ENABLE_MTK_LCD_DTS_CHECK_NVT
|
||
|
lcd_comp = of_find_compatible_node(NULL, NULL,
|
||
|
"auo,hx83102d,vdo");
|
||
|
if (lcd_comp) {
|
||
|
pr_info("hx83102d : %s : panel compatible match\n", __func__);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
pr_info("hx83102d : %s : panel compatible doesn't match\n", __func__);
|
||
|
return -EPERM;
|
||
|
#else
|
||
|
return 0;
|
||
|
#endif
|
||
|
}
|
||
|
|
||
|
static int _lcm_i2c_remove(struct i2c_client *client)
|
||
|
{
|
||
|
pr_info("[LCM][I2C][hx83102d] %s\n", __func__);
|
||
|
_lcm_i2c_client = NULL;
|
||
|
i2c_unregister_device(client);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int _lcm_i2c_write_bytes(unsigned char addr, unsigned char value)
|
||
|
{
|
||
|
int ret = 0;
|
||
|
struct i2c_client *client = _lcm_i2c_client;
|
||
|
char write_data[2] = { 0 };
|
||
|
|
||
|
if (client == NULL) {
|
||
|
pr_debug("ERROR!![hx83102d] _lcm_i2c_client is null\n");
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
write_data[0] = addr;
|
||
|
write_data[1] = value;
|
||
|
ret = i2c_master_send(client, write_data, 2);
|
||
|
if (ret < 0)
|
||
|
pr_debug("[LCM][ERROR][hx83102d] _lcm_i2c write data fail !!\n");
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* module load/unload record keeping
|
||
|
*/
|
||
|
static int __init _lcm_i2c_init(void)
|
||
|
{
|
||
|
pr_info("[LCM][I2C][hx83102d] %s\n", __func__);
|
||
|
i2c_add_driver(&_lcm_i2c_driver);
|
||
|
pr_info("[LCM][I2C][hx83102d] %s success\n", __func__);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void __exit _lcm_i2c_exit(void)
|
||
|
{
|
||
|
pr_info("[LCM][I2C][hx83102d] %s\n", __func__);
|
||
|
i2c_del_driver(&_lcm_i2c_driver);
|
||
|
}
|
||
|
|
||
|
module_init(_lcm_i2c_init);
|
||
|
module_exit(_lcm_i2c_exit);
|
||
|
|
||
|
/*******************************************************/
|
||
|
/* End Backlight function */
|
||
|
/*******************************************************/
|
||
|
|
||
|
struct lcm {
|
||
|
struct device *dev;
|
||
|
struct drm_panel panel;
|
||
|
struct backlight_device *backlight;
|
||
|
struct gpio_desc *reset_gpio;
|
||
|
struct gpio_desc *bias_pos, *bias_neg;
|
||
|
bool prepared;
|
||
|
bool enabled;
|
||
|
|
||
|
int error;
|
||
|
};
|
||
|
|
||
|
#define lcm_dcs_write_seq(ctx, seq...) \
|
||
|
({\
|
||
|
const u8 d[] = { seq };\
|
||
|
BUILD_BUG_ON_MSG(ARRAY_SIZE(d) > 64, "DCS sequence too big for stack");\
|
||
|
lcm_dcs_write(ctx, d, ARRAY_SIZE(d));\
|
||
|
})
|
||
|
|
||
|
#define lcm_dcs_write_seq_static(ctx, seq...) \
|
||
|
({\
|
||
|
static const u8 d[] = { seq };\
|
||
|
lcm_dcs_write(ctx, d, ARRAY_SIZE(d));\
|
||
|
})
|
||
|
|
||
|
static inline struct lcm *panel_to_lcm(struct drm_panel *panel)
|
||
|
{
|
||
|
return container_of(panel, struct lcm, panel);
|
||
|
}
|
||
|
|
||
|
static void lcm_dcs_write(struct lcm *ctx, const void *data, size_t len)
|
||
|
{
|
||
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
||
|
ssize_t ret;
|
||
|
char *addr;
|
||
|
|
||
|
if (ctx->error < 0)
|
||
|
return;
|
||
|
|
||
|
addr = (char *)data;
|
||
|
if ((int)*addr < 0xB0)
|
||
|
ret = mipi_dsi_dcs_write_buffer(dsi, data, len);
|
||
|
else
|
||
|
ret = mipi_dsi_generic_write(dsi, data, len);
|
||
|
if (ret < 0) {
|
||
|
dev_info(ctx->dev, "error %zd writing seq: %ph\n", ret, data);
|
||
|
ctx->error = ret;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
#ifdef PANEL_SUPPORT_READBACK
|
||
|
static int lcm_dcs_read(struct lcm *ctx, u8 cmd, void *data, size_t len)
|
||
|
{
|
||
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
||
|
ssize_t ret;
|
||
|
|
||
|
if (ctx->error < 0)
|
||
|
return 0;
|
||
|
|
||
|
ret = mipi_dsi_dcs_read(dsi, cmd, data, len);
|
||
|
if (ret < 0) {
|
||
|
dev_info(ctx->dev, "error %d reading dcs seq:(%#x)\n", ret, cmd);
|
||
|
ctx->error = ret;
|
||
|
}
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void lcm_panel_get_data(struct lcm *ctx)
|
||
|
{
|
||
|
u8 buffer[3] = {0};
|
||
|
static int ret;
|
||
|
|
||
|
if (ret == 0) {
|
||
|
ret = lcm_dcs_read(ctx, 0x0A, buffer, 1);
|
||
|
dev_info(ctx->dev, "return %d data(0x%08x) to dsi engine\n",
|
||
|
ret, buffer[0] | (buffer[1] << 8));
|
||
|
}
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
static void lcm_panel_init(struct lcm *ctx)
|
||
|
{
|
||
|
_lm36274_init();
|
||
|
|
||
|
ctx->reset_gpio =
|
||
|
devm_gpiod_get(ctx->dev, "reset", GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->reset_gpio)) {
|
||
|
dev_info(ctx->dev, "%s: cannot get reset_gpio %ld\n",
|
||
|
__func__, PTR_ERR(ctx->reset_gpio));
|
||
|
return;
|
||
|
}
|
||
|
gpiod_set_value(ctx->reset_gpio, 0);
|
||
|
udelay(15 * 1000);
|
||
|
gpiod_set_value(ctx->reset_gpio, 1);
|
||
|
udelay(1 * 1000);
|
||
|
gpiod_set_value(ctx->reset_gpio, 0);
|
||
|
udelay(10 * 1000);
|
||
|
gpiod_set_value(ctx->reset_gpio, 1);
|
||
|
udelay(10 * 1000);
|
||
|
devm_gpiod_put(ctx->dev, ctx->reset_gpio);
|
||
|
|
||
|
lcm_dcs_write_seq_static(ctx, 0xB9,0x83, 0x10, 0x2D); /* Set extended command acceess */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xB1,0x22, 0x44, 0x31, 0x31, 0x22,
|
||
|
0x34, 0x2F, 0x57, 0x08, 0x08, 0x08, 0x67, 0x67, 0x71); /* Set Power */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xB2,0x00, 0x00, 0x06, 0x18, 0x00,
|
||
|
0x0E, 0xFE, 0x40, 0x00, 0x00, 0x00, 0x00, 0xF4, 0xA0); /* Set Display */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xB4,0x19, 0x59, 0x19, 0x59, 0x19,
|
||
|
0x59, 0x19, 0x59, 0x06, 0xFF, 0x06, 0x20, 0x00, 0xFF); /* Set panel driving timing */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xCC,0x02); /* Set Panel type */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xD3,0x00, 0x00, 0x3C, 0x03, 0x00,
|
||
|
0x08, 0x00, 0x37, 0x00, 0x33, 0x33, 0x08, 0x08, 0x00, 0x00,
|
||
|
0x32, 0x10, 0x06, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||
|
0x00, 0x05, 0x12, 0x00, 0x00); /* Set GIP Option */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xD5,0x18, 0x18, 0x18, 0x18, 0x39,
|
||
|
0x39, 0x18, 0x18, 0x20, 0x21, 0x22, 0x23, 0x19, 0x19, 0x19,
|
||
|
0x19, 0x04, 0x05, 0x06, 0x07, 0x00, 0x01, 0x02, 0x03, 0x18,
|
||
|
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
|
||
|
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18); /* Set GIP output 1 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xD6,0x18, 0x18, 0x19, 0x19, 0x39,
|
||
|
0x39, 0x18, 0x18, 0x23, 0x22, 0x21, 0x20, 0x18, 0x18, 0x19,
|
||
|
0x19, 0x03, 0x02, 0x01, 0x00, 0x07, 0x06, 0x05, 0x04, 0x18,
|
||
|
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
|
||
|
0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18); /* Set GIP output 2 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xE7,0xFF, 0x0F, 0x00, 0x00); /* Set TP */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x01); /* Switch to Bank1 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xE7,0x01); /* Set TP */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x00); /* Switch to Bank0 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x02); /* Switch to Bank2 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xD8,0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||
|
0xF0, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0); /* Set GIP output 3 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x03); /* Switch to Bank3 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xD8,0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
|
||
|
0xA0, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xA0, 0xAA, 0xAA, 0xAA,
|
||
|
0xAA, 0xAA, 0xA0, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xA0); /* Set GIP output 3 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x00); /* Switch to Bank0 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xE0,0x00, 0x01, 0x06, 0x0A, 0x0F,
|
||
|
0x11, 0x27, 0x2F, 0x39, 0x39, 0x5C, 0x64, 0x72, 0x82, 0x87,
|
||
|
0x96, 0xA3, 0xC4, 0xC6, 0x63, 0x6C, 0x77, 0x7F, 0x00, 0x01,
|
||
|
0x06, 0x0A, 0x0F, 0x11, 0x27, 0x2F, 0x39, 0x39, 0x5C, 0x6E,
|
||
|
0x7A, 0x98, 0x9B, 0xAA, 0xB7, 0xC4, 0xC6, 0x63, 0x6C, 0x77,
|
||
|
0x7F); /* Set Gamma */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBA,0x70, 0x23, 0xA8, 0x8B, 0xB2,
|
||
|
0x80, 0x80, 0x01, 0x10, 0x00, 0x00, 0x00, 0x0D, 0x3D, 0x02,
|
||
|
0x77, 0x04, 0x01, 0x00); /* Set DSI */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x01); /* Switch to Bank1 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xCB,0x01); /* Set OSC option */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x00); /* Switch to Bank0 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xCB,0x00, 0x53, 0x00, 0x02, 0x6C); /* Set OSC option */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBF,0xFC, 0x00, 0x24, 0x9E, 0xF6,
|
||
|
0x00, 0x5D); /* Set power option */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x02); /* Switch to Bank2 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xB4,0x42, 0x00, 0x33, 0x00, 0x33,
|
||
|
0x88, 0xB3, 0x00);/* Set power option */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x00); /* Switch to Bank0 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xD1,0x20, 0x01); /* Set TP option */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x02); /* Switch to Bank2 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xB1,0x7F, 0x03, 0xFF); /* Set Power Option */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x00); /* Switch to Bank0 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x01); /* Switch to Bank1 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xD3,0x01, 0x00, 0x39); /* Set GIP Option 1 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xBD,0x00); /* Switch to Bank0 */
|
||
|
lcm_dcs_write_seq_static(ctx, 0xC9,0x04, 0x65, 0x90, 0x01); /* Set CABC PWM frequency to 2.5KHz */
|
||
|
lcm_dcs_write_seq_static(ctx, 0x51,0x0F, 0xFF); /* Set PWM duty to 100% */
|
||
|
lcm_dcs_write_seq_static(ctx, 0x53,0x24); /* Eable PWM out */
|
||
|
|
||
|
lcm_dcs_write_seq_static(ctx, 0x11, 0x00);
|
||
|
msleep(120);
|
||
|
lcm_dcs_write_seq_static(ctx, 0x29, 0x00);
|
||
|
msleep(50);
|
||
|
}
|
||
|
|
||
|
static int lcm_disable(struct drm_panel *panel)
|
||
|
{
|
||
|
struct lcm *ctx = panel_to_lcm(panel);
|
||
|
|
||
|
if (!ctx->enabled)
|
||
|
return 0;
|
||
|
|
||
|
if (ctx->backlight) {
|
||
|
ctx->backlight->props.power = FB_BLANK_POWERDOWN;
|
||
|
backlight_update_status(ctx->backlight);
|
||
|
}
|
||
|
|
||
|
ctx->enabled = false;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lcm_unprepare(struct drm_panel *panel)
|
||
|
{
|
||
|
struct lcm *ctx = panel_to_lcm(panel);
|
||
|
|
||
|
if (!ctx->prepared)
|
||
|
return 0;
|
||
|
|
||
|
lcm_dcs_write_seq_static(ctx, 0x28);
|
||
|
msleep(50);
|
||
|
lcm_dcs_write_seq_static(ctx, 0x10);
|
||
|
msleep(150);
|
||
|
|
||
|
ctx->error = 0;
|
||
|
ctx->prepared = false;
|
||
|
ctx->reset_gpio =
|
||
|
devm_gpiod_get(ctx->dev, "reset", GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->reset_gpio)) {
|
||
|
dev_info(ctx->dev, "%s: cannot get reset_gpio %ld\n",
|
||
|
__func__, PTR_ERR(ctx->reset_gpio));
|
||
|
return PTR_ERR(ctx->reset_gpio);
|
||
|
}
|
||
|
gpiod_set_value(ctx->reset_gpio, 0);
|
||
|
devm_gpiod_put(ctx->dev, ctx->reset_gpio);
|
||
|
|
||
|
|
||
|
ctx->bias_neg = devm_gpiod_get_index(ctx->dev,
|
||
|
"bias", 1, GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->bias_neg)) {
|
||
|
dev_info(ctx->dev, "%s: cannot get bias_neg %ld\n",
|
||
|
__func__, PTR_ERR(ctx->bias_neg));
|
||
|
return PTR_ERR(ctx->bias_neg);
|
||
|
}
|
||
|
gpiod_set_value(ctx->bias_neg, 0);
|
||
|
devm_gpiod_put(ctx->dev, ctx->bias_neg);
|
||
|
|
||
|
udelay(1000);
|
||
|
|
||
|
ctx->bias_pos = devm_gpiod_get_index(ctx->dev,
|
||
|
"bias", 0, GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->bias_pos)) {
|
||
|
dev_info(ctx->dev, "%s: cannot get bias_pos %ld\n",
|
||
|
__func__, PTR_ERR(ctx->bias_pos));
|
||
|
return PTR_ERR(ctx->bias_pos);
|
||
|
}
|
||
|
gpiod_set_value(ctx->bias_pos, 0);
|
||
|
devm_gpiod_put(ctx->dev, ctx->bias_pos);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lcm_prepare(struct drm_panel *panel)
|
||
|
{
|
||
|
struct lcm *ctx = panel_to_lcm(panel);
|
||
|
int ret;
|
||
|
|
||
|
pr_info("%s\n", __func__);
|
||
|
if (ctx->prepared)
|
||
|
return 0;
|
||
|
|
||
|
ctx->bias_pos = devm_gpiod_get_index(ctx->dev,
|
||
|
"bias", 0, GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->bias_pos)) {
|
||
|
dev_info(ctx->dev, "%s: cannot get bias_pos %ld\n",
|
||
|
__func__, PTR_ERR(ctx->bias_pos));
|
||
|
return PTR_ERR(ctx->bias_pos);
|
||
|
}
|
||
|
gpiod_set_value(ctx->bias_pos, 1);
|
||
|
devm_gpiod_put(ctx->dev, ctx->bias_pos);
|
||
|
|
||
|
udelay(2000);
|
||
|
|
||
|
ctx->bias_neg = devm_gpiod_get_index(ctx->dev,
|
||
|
"bias", 1, GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->bias_neg)) {
|
||
|
dev_info(ctx->dev, "%s: cannot get bias_neg %ld\n",
|
||
|
__func__, PTR_ERR(ctx->bias_neg));
|
||
|
return PTR_ERR(ctx->bias_neg);
|
||
|
}
|
||
|
gpiod_set_value(ctx->bias_neg, 1);
|
||
|
devm_gpiod_put(ctx->dev, ctx->bias_neg);
|
||
|
|
||
|
lcm_panel_init(ctx);
|
||
|
|
||
|
ret = ctx->error;
|
||
|
if (ret < 0)
|
||
|
lcm_unprepare(panel);
|
||
|
|
||
|
ctx->prepared = true;
|
||
|
|
||
|
#if defined(CONFIG_MTK_PANEL_EXT)
|
||
|
mtk_panel_tch_rst(panel);
|
||
|
#endif
|
||
|
#ifdef PANEL_SUPPORT_READBACK
|
||
|
lcm_panel_get_data(ctx);
|
||
|
#endif
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int lcm_enable(struct drm_panel *panel)
|
||
|
{
|
||
|
struct lcm *ctx = panel_to_lcm(panel);
|
||
|
|
||
|
if (ctx->enabled)
|
||
|
return 0;
|
||
|
|
||
|
if (ctx->backlight) {
|
||
|
ctx->backlight->props.power = FB_BLANK_UNBLANK;
|
||
|
backlight_update_status(ctx->backlight);
|
||
|
}
|
||
|
|
||
|
ctx->enabled = true;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#define HFP (105)
|
||
|
#define HSA (12)
|
||
|
#define HBP (26)
|
||
|
#define VFP (254)
|
||
|
#define VSA (2)
|
||
|
#define VBP (12)
|
||
|
#define VAC (1560)
|
||
|
#define HAC (720)
|
||
|
static u32 fake_heigh = VAC;
|
||
|
static u32 fake_width = HAC;
|
||
|
static bool need_fake_resolution;
|
||
|
|
||
|
static struct drm_display_mode default_mode = {
|
||
|
.clock = 163406,
|
||
|
.hdisplay = HAC,
|
||
|
.hsync_start = HAC + HFP,
|
||
|
.hsync_end = HAC + HFP + HSA,
|
||
|
.htotal = HAC + HFP + HSA + HBP,
|
||
|
.vdisplay = VAC,
|
||
|
.vsync_start = VAC + VFP,
|
||
|
.vsync_end = VAC + VFP + VSA,
|
||
|
.vtotal = VAC + VFP + VSA + VBP,
|
||
|
.vrefresh = 60,
|
||
|
};
|
||
|
|
||
|
#if defined(CONFIG_MTK_PANEL_EXT)
|
||
|
static int panel_ext_reset(struct drm_panel *panel, int on)
|
||
|
{
|
||
|
struct lcm *ctx = panel_to_lcm(panel);
|
||
|
|
||
|
ctx->reset_gpio =
|
||
|
devm_gpiod_get(ctx->dev, "reset", GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->reset_gpio)) {
|
||
|
dev_info(ctx->dev, "%s: cannot get reset_gpio %ld\n",
|
||
|
__func__, PTR_ERR(ctx->reset_gpio));
|
||
|
return PTR_ERR(ctx->reset_gpio);
|
||
|
}
|
||
|
gpiod_set_value(ctx->reset_gpio, on);
|
||
|
devm_gpiod_put(ctx->dev, ctx->reset_gpio);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int panel_ata_check(struct drm_panel *panel)
|
||
|
{
|
||
|
struct lcm *ctx = panel_to_lcm(panel);
|
||
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
||
|
unsigned char data[3] = {0x00, 0x00, 0x00};
|
||
|
unsigned char id[3] = {0x00, 0x00, 0x00};
|
||
|
ssize_t ret;
|
||
|
|
||
|
ret = mipi_dsi_dcs_read(dsi, 0x4, data, 3);
|
||
|
if (ret < 0) {
|
||
|
pr_debug("%s error\n", __func__);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
DDPINFO("ATA read data %x %x %x\n", data[0], data[1], data[2]);
|
||
|
|
||
|
if (data[0] == id[0] &&
|
||
|
data[1] == id[1] &&
|
||
|
data[2] == id[2])
|
||
|
return 1;
|
||
|
|
||
|
DDPINFO("ATA expect read data is %x %x %x\n",
|
||
|
id[0], id[1], id[2]);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lcm_setbacklight_cmdq(void *dsi, dcs_write_gce cb,
|
||
|
void *handle, unsigned int level)
|
||
|
{
|
||
|
char bl_tb0[] = {0x51, 0x0F, 0xFF};
|
||
|
|
||
|
bl_tb0[2] = level;
|
||
|
|
||
|
if (!cb)
|
||
|
return -1;
|
||
|
|
||
|
cb(dsi, handle, bl_tb0, ARRAY_SIZE(bl_tb0));
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int lcm_get_virtual_heigh(void)
|
||
|
{
|
||
|
return VAC;
|
||
|
}
|
||
|
|
||
|
static int lcm_get_virtual_width(void)
|
||
|
{
|
||
|
return HAC;
|
||
|
}
|
||
|
|
||
|
static struct mtk_panel_params ext_params = {
|
||
|
.pll_clk = 320,
|
||
|
.vfp_low_power = 254,
|
||
|
.cust_esd_check = 0,
|
||
|
.esd_check_enable = 0,
|
||
|
.lcm_esd_check_table[0] = {
|
||
|
.cmd = 0x0a,
|
||
|
.count = 1,
|
||
|
.para_list[0] = 0x9c,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
static struct mtk_panel_funcs ext_funcs = {
|
||
|
.reset = panel_ext_reset,
|
||
|
.set_backlight_cmdq = lcm_setbacklight_cmdq,
|
||
|
.ata_check = panel_ata_check,
|
||
|
.get_virtual_heigh = lcm_get_virtual_heigh,
|
||
|
.get_virtual_width = lcm_get_virtual_width,
|
||
|
};
|
||
|
#endif
|
||
|
|
||
|
struct panel_desc {
|
||
|
const struct drm_display_mode *modes;
|
||
|
unsigned int num_modes;
|
||
|
|
||
|
unsigned int bpc;
|
||
|
|
||
|
struct {
|
||
|
unsigned int width;
|
||
|
unsigned int height;
|
||
|
} size;
|
||
|
|
||
|
struct {
|
||
|
unsigned int prepare;
|
||
|
unsigned int enable;
|
||
|
unsigned int disable;
|
||
|
unsigned int unprepare;
|
||
|
} delay;
|
||
|
};
|
||
|
|
||
|
static void change_drm_disp_mode_params(struct drm_display_mode *mode)
|
||
|
{
|
||
|
if (fake_heigh > 0 && fake_heigh < VAC) {
|
||
|
mode->vdisplay = fake_heigh;
|
||
|
mode->vsync_start = fake_heigh + VFP;
|
||
|
mode->vsync_end = fake_heigh + VFP + VSA;
|
||
|
mode->vtotal = fake_heigh + VFP + VSA + VBP;
|
||
|
}
|
||
|
if (fake_width > 0 && fake_width < HAC) {
|
||
|
mode->hdisplay = fake_width;
|
||
|
mode->hsync_start = fake_width + HFP;
|
||
|
mode->hsync_end = fake_width + HFP + HSA;
|
||
|
mode->htotal = fake_width + HFP + HSA + HBP;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int lcm_get_modes(struct drm_panel *panel)
|
||
|
{
|
||
|
struct drm_display_mode *mode;
|
||
|
|
||
|
if (need_fake_resolution)
|
||
|
change_drm_disp_mode_params(&default_mode);
|
||
|
mode = drm_mode_duplicate(panel->drm, &default_mode);
|
||
|
if (!mode) {
|
||
|
dev_info(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
|
||
|
default_mode.hdisplay, default_mode.vdisplay,
|
||
|
default_mode.vrefresh);
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
drm_mode_set_name(mode);
|
||
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
||
|
drm_mode_probed_add(panel->connector, mode);
|
||
|
|
||
|
panel->connector->display_info.width_mm = 64;
|
||
|
panel->connector->display_info.height_mm = 129;
|
||
|
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
static const struct drm_panel_funcs lcm_drm_funcs = {
|
||
|
.disable = lcm_disable,
|
||
|
.unprepare = lcm_unprepare,
|
||
|
.prepare = lcm_prepare,
|
||
|
.enable = lcm_enable,
|
||
|
.get_modes = lcm_get_modes,
|
||
|
};
|
||
|
|
||
|
static void check_is_need_fake_resolution(struct device *dev)
|
||
|
{
|
||
|
unsigned int ret = 0;
|
||
|
|
||
|
ret = of_property_read_u32(dev->of_node, "fake_heigh", &fake_heigh);
|
||
|
if (ret)
|
||
|
need_fake_resolution = false;
|
||
|
ret = of_property_read_u32(dev->of_node, "fake_width", &fake_width);
|
||
|
if (ret)
|
||
|
need_fake_resolution = false;
|
||
|
if (fake_heigh > 0 && fake_heigh < VAC)
|
||
|
need_fake_resolution = true;
|
||
|
if (fake_width > 0 && fake_width < HAC)
|
||
|
need_fake_resolution = true;
|
||
|
}
|
||
|
|
||
|
static int lcm_probe(struct mipi_dsi_device *dsi)
|
||
|
{
|
||
|
struct device *dev = &dsi->dev;
|
||
|
struct lcm *ctx;
|
||
|
struct device_node *backlight;
|
||
|
struct device_node *lcd_comp;
|
||
|
int lcd_id_pins = 0;
|
||
|
int ret;
|
||
|
|
||
|
#ifdef ENABLE_MTK_LCD_DTS_CHECK_NVT
|
||
|
lcd_comp = of_find_compatible_node(NULL, NULL,
|
||
|
"auo,hx83102d,vdo");
|
||
|
if (!lcd_comp) {
|
||
|
pr_info("hx83102d : %s : panel compatible doesn't match\n", __func__);
|
||
|
return -1;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
pr_info("%s-hx83102d IN\n", __func__);
|
||
|
ctx = devm_kzalloc(dev, sizeof(struct lcm), GFP_KERNEL);
|
||
|
if (!ctx)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
mipi_dsi_set_drvdata(dsi, ctx);
|
||
|
|
||
|
ctx->dev = dev;
|
||
|
dsi->lanes = 4;
|
||
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
||
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO
|
||
|
| MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_EOT_PACKET
|
||
|
| MIPI_DSI_CLOCK_NON_CONTINUOUS;
|
||
|
|
||
|
backlight = of_parse_phandle(dev->of_node, "backlight", 0);
|
||
|
if (backlight) {
|
||
|
ctx->backlight = of_find_backlight_by_node(backlight);
|
||
|
of_node_put(backlight);
|
||
|
|
||
|
if (!ctx->backlight)
|
||
|
return -EPROBE_DEFER;
|
||
|
}
|
||
|
|
||
|
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->reset_gpio)) {
|
||
|
dev_info(dev, "%s: cannot get reset-gpios %ld\n",
|
||
|
__func__, PTR_ERR(ctx->reset_gpio));
|
||
|
return PTR_ERR(ctx->reset_gpio);
|
||
|
}
|
||
|
devm_gpiod_put(dev, ctx->reset_gpio);
|
||
|
|
||
|
ctx->bias_pos = devm_gpiod_get_index(dev, "bias", 0, GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->bias_pos)) {
|
||
|
dev_info(dev, "%s: cannot get bias-pos 0 %ld\n",
|
||
|
__func__, PTR_ERR(ctx->bias_pos));
|
||
|
return PTR_ERR(ctx->bias_pos);
|
||
|
}
|
||
|
devm_gpiod_put(dev, ctx->bias_pos);
|
||
|
|
||
|
ctx->bias_neg = devm_gpiod_get_index(dev, "bias", 1, GPIOD_OUT_HIGH);
|
||
|
if (IS_ERR(ctx->bias_neg)) {
|
||
|
dev_info(dev, "%s: cannot get bias-neg 1 %ld\n",
|
||
|
__func__, PTR_ERR(ctx->bias_neg));
|
||
|
return PTR_ERR(ctx->bias_neg);
|
||
|
}
|
||
|
devm_gpiod_put(dev, ctx->bias_neg);
|
||
|
|
||
|
ctx->prepared = true;
|
||
|
ctx->enabled = true;
|
||
|
|
||
|
drm_panel_init(&ctx->panel);
|
||
|
ctx->panel.dev = dev;
|
||
|
ctx->panel.funcs = &lcm_drm_funcs;
|
||
|
|
||
|
ret = drm_panel_add(&ctx->panel);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
ret = mipi_dsi_attach(dsi);
|
||
|
if (ret < 0)
|
||
|
drm_panel_remove(&ctx->panel);
|
||
|
|
||
|
#if defined(CONFIG_MTK_PANEL_EXT)
|
||
|
mtk_panel_tch_handle_reg(&ctx->panel);
|
||
|
ret = mtk_panel_ext_create(dev, &ext_params, &ext_funcs, &ctx->panel);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
#endif
|
||
|
check_is_need_fake_resolution(dev);
|
||
|
pr_info("%s-hx83102d\n", __func__);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int lcm_remove(struct mipi_dsi_device *dsi)
|
||
|
{
|
||
|
struct lcm *ctx = mipi_dsi_get_drvdata(dsi);
|
||
|
|
||
|
mipi_dsi_detach(dsi);
|
||
|
drm_panel_remove(&ctx->panel);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct of_device_id lcm_of_match[] = {
|
||
|
{ .compatible = "auo,hx83102d,vdo", },
|
||
|
{ }
|
||
|
};
|
||
|
|
||
|
MODULE_DEVICE_TABLE(of, lcm_of_match);
|
||
|
|
||
|
static struct mipi_dsi_driver lcm_driver = {
|
||
|
.probe = lcm_probe,
|
||
|
.remove = lcm_remove,
|
||
|
.driver = {
|
||
|
.name = "panel-auo-hx83102d-vdo",
|
||
|
.owner = THIS_MODULE,
|
||
|
.of_match_table = lcm_of_match,
|
||
|
},
|
||
|
};
|
||
|
|
||
|
module_mipi_dsi_driver(lcm_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Yi-Lun Wang <Yi-Lun.Wang@mediatek.com>");
|
||
|
MODULE_DESCRIPTION("hx83102d auo VDO LCD Panel Driver");
|
||
|
MODULE_LICENSE("GPL v2");
|
||
|
|