3616 lines
102 KiB
C
3616 lines
102 KiB
C
|
// SPDX-License-Identifier: GPL-2.0-only
|
||
|
/*
|
||
|
* adv7842 - Analog Devices ADV7842 video decoder driver
|
||
|
*
|
||
|
* Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
* References (c = chapter, p = page):
|
||
|
* REF_01 - Analog devices, ADV7842,
|
||
|
* Register Settings Recommendations, Rev. 1.9, April 2011
|
||
|
* REF_02 - Analog devices, Software User Guide, UG-206,
|
||
|
* ADV7842 I2C Register Maps, Rev. 0, November 2010
|
||
|
* REF_03 - Analog devices, Hardware User Guide, UG-214,
|
||
|
* ADV7842 Fast Switching 2:1 HDMI 1.4 Receiver with 3D-Comb
|
||
|
* Decoder and Digitizer , Rev. 0, January 2011
|
||
|
*/
|
||
|
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/i2c.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/videodev2.h>
|
||
|
#include <linux/workqueue.h>
|
||
|
#include <linux/v4l2-dv-timings.h>
|
||
|
#include <linux/hdmi.h>
|
||
|
#include <media/cec.h>
|
||
|
#include <media/v4l2-device.h>
|
||
|
#include <media/v4l2-event.h>
|
||
|
#include <media/v4l2-ctrls.h>
|
||
|
#include <media/v4l2-dv-timings.h>
|
||
|
#include <media/i2c/adv7842.h>
|
||
|
|
||
|
static int debug;
|
||
|
module_param(debug, int, 0644);
|
||
|
MODULE_PARM_DESC(debug, "debug level (0-2)");
|
||
|
|
||
|
MODULE_DESCRIPTION("Analog Devices ADV7842 video decoder driver");
|
||
|
MODULE_AUTHOR("Hans Verkuil <hans.verkuil@cisco.com>");
|
||
|
MODULE_AUTHOR("Martin Bugge <marbugge@cisco.com>");
|
||
|
MODULE_LICENSE("GPL");
|
||
|
|
||
|
/* ADV7842 system clock frequency */
|
||
|
#define ADV7842_fsc (28636360)
|
||
|
|
||
|
#define ADV7842_RGB_OUT (1 << 1)
|
||
|
|
||
|
#define ADV7842_OP_FORMAT_SEL_8BIT (0 << 0)
|
||
|
#define ADV7842_OP_FORMAT_SEL_10BIT (1 << 0)
|
||
|
#define ADV7842_OP_FORMAT_SEL_12BIT (2 << 0)
|
||
|
|
||
|
#define ADV7842_OP_MODE_SEL_SDR_422 (0 << 5)
|
||
|
#define ADV7842_OP_MODE_SEL_DDR_422 (1 << 5)
|
||
|
#define ADV7842_OP_MODE_SEL_SDR_444 (2 << 5)
|
||
|
#define ADV7842_OP_MODE_SEL_DDR_444 (3 << 5)
|
||
|
#define ADV7842_OP_MODE_SEL_SDR_422_2X (4 << 5)
|
||
|
#define ADV7842_OP_MODE_SEL_ADI_CM (5 << 5)
|
||
|
|
||
|
#define ADV7842_OP_CH_SEL_GBR (0 << 5)
|
||
|
#define ADV7842_OP_CH_SEL_GRB (1 << 5)
|
||
|
#define ADV7842_OP_CH_SEL_BGR (2 << 5)
|
||
|
#define ADV7842_OP_CH_SEL_RGB (3 << 5)
|
||
|
#define ADV7842_OP_CH_SEL_BRG (4 << 5)
|
||
|
#define ADV7842_OP_CH_SEL_RBG (5 << 5)
|
||
|
|
||
|
#define ADV7842_OP_SWAP_CB_CR (1 << 0)
|
||
|
|
||
|
#define ADV7842_MAX_ADDRS (3)
|
||
|
|
||
|
/*
|
||
|
**********************************************************************
|
||
|
*
|
||
|
* Arrays with configuration parameters for the ADV7842
|
||
|
*
|
||
|
**********************************************************************
|
||
|
*/
|
||
|
|
||
|
struct adv7842_format_info {
|
||
|
u32 code;
|
||
|
u8 op_ch_sel;
|
||
|
bool rgb_out;
|
||
|
bool swap_cb_cr;
|
||
|
u8 op_format_sel;
|
||
|
};
|
||
|
|
||
|
struct adv7842_state {
|
||
|
struct adv7842_platform_data pdata;
|
||
|
struct v4l2_subdev sd;
|
||
|
struct media_pad pad;
|
||
|
struct v4l2_ctrl_handler hdl;
|
||
|
enum adv7842_mode mode;
|
||
|
struct v4l2_dv_timings timings;
|
||
|
enum adv7842_vid_std_select vid_std_select;
|
||
|
|
||
|
const struct adv7842_format_info *format;
|
||
|
|
||
|
v4l2_std_id norm;
|
||
|
struct {
|
||
|
u8 edid[256];
|
||
|
u32 present;
|
||
|
} hdmi_edid;
|
||
|
struct {
|
||
|
u8 edid[256];
|
||
|
u32 present;
|
||
|
} vga_edid;
|
||
|
struct v4l2_fract aspect_ratio;
|
||
|
u32 rgb_quantization_range;
|
||
|
bool is_cea_format;
|
||
|
struct delayed_work delayed_work_enable_hotplug;
|
||
|
bool restart_stdi_once;
|
||
|
bool hdmi_port_a;
|
||
|
|
||
|
/* i2c clients */
|
||
|
struct i2c_client *i2c_sdp_io;
|
||
|
struct i2c_client *i2c_sdp;
|
||
|
struct i2c_client *i2c_cp;
|
||
|
struct i2c_client *i2c_vdp;
|
||
|
struct i2c_client *i2c_afe;
|
||
|
struct i2c_client *i2c_hdmi;
|
||
|
struct i2c_client *i2c_repeater;
|
||
|
struct i2c_client *i2c_edid;
|
||
|
struct i2c_client *i2c_infoframe;
|
||
|
struct i2c_client *i2c_cec;
|
||
|
struct i2c_client *i2c_avlink;
|
||
|
|
||
|
/* controls */
|
||
|
struct v4l2_ctrl *detect_tx_5v_ctrl;
|
||
|
struct v4l2_ctrl *analog_sampling_phase_ctrl;
|
||
|
struct v4l2_ctrl *free_run_color_ctrl_manual;
|
||
|
struct v4l2_ctrl *free_run_color_ctrl;
|
||
|
struct v4l2_ctrl *rgb_quantization_range_ctrl;
|
||
|
|
||
|
struct cec_adapter *cec_adap;
|
||
|
u8 cec_addr[ADV7842_MAX_ADDRS];
|
||
|
u8 cec_valid_addrs;
|
||
|
bool cec_enabled_adap;
|
||
|
};
|
||
|
|
||
|
/* Unsupported timings. This device cannot support 720p30. */
|
||
|
static const struct v4l2_dv_timings adv7842_timings_exceptions[] = {
|
||
|
V4L2_DV_BT_CEA_1280X720P30,
|
||
|
{ }
|
||
|
};
|
||
|
|
||
|
static bool adv7842_check_dv_timings(const struct v4l2_dv_timings *t, void *hdl)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; adv7842_timings_exceptions[i].bt.width; i++)
|
||
|
if (v4l2_match_dv_timings(t, adv7842_timings_exceptions + i, 0, false))
|
||
|
return false;
|
||
|
return true;
|
||
|
}
|
||
|
|
||
|
struct adv7842_video_standards {
|
||
|
struct v4l2_dv_timings timings;
|
||
|
u8 vid_std;
|
||
|
u8 v_freq;
|
||
|
};
|
||
|
|
||
|
/* sorted by number of lines */
|
||
|
static const struct adv7842_video_standards adv7842_prim_mode_comp[] = {
|
||
|
/* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */
|
||
|
{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
|
||
|
{ V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 },
|
||
|
{ V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
|
||
|
/* TODO add 1920x1080P60_RB (CVT timing) */
|
||
|
{ },
|
||
|
};
|
||
|
|
||
|
/* sorted by number of lines */
|
||
|
static const struct adv7842_video_standards adv7842_prim_mode_gr[] = {
|
||
|
{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */
|
||
|
/* TODO add 1600X1200P60_RB (not a DMT timing) */
|
||
|
{ V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */
|
||
|
{ },
|
||
|
};
|
||
|
|
||
|
/* sorted by number of lines */
|
||
|
static const struct adv7842_video_standards adv7842_prim_mode_hdmi_comp[] = {
|
||
|
{ V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 },
|
||
|
{ V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 },
|
||
|
{ V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 },
|
||
|
{ V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 },
|
||
|
{ V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 },
|
||
|
{ },
|
||
|
};
|
||
|
|
||
|
/* sorted by number of lines */
|
||
|
static const struct adv7842_video_standards adv7842_prim_mode_hdmi_gr[] = {
|
||
|
{ V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 },
|
||
|
{ V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 },
|
||
|
{ },
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_event adv7842_ev_fmt = {
|
||
|
.type = V4L2_EVENT_SOURCE_CHANGE,
|
||
|
.u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
|
||
|
};
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static inline struct adv7842_state *to_state(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
return container_of(sd, struct adv7842_state, sd);
|
||
|
}
|
||
|
|
||
|
static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
return &container_of(ctrl->handler, struct adv7842_state, hdl)->sd;
|
||
|
}
|
||
|
|
||
|
static inline unsigned hblanking(const struct v4l2_bt_timings *t)
|
||
|
{
|
||
|
return V4L2_DV_BT_BLANKING_WIDTH(t);
|
||
|
}
|
||
|
|
||
|
static inline unsigned htotal(const struct v4l2_bt_timings *t)
|
||
|
{
|
||
|
return V4L2_DV_BT_FRAME_WIDTH(t);
|
||
|
}
|
||
|
|
||
|
static inline unsigned vblanking(const struct v4l2_bt_timings *t)
|
||
|
{
|
||
|
return V4L2_DV_BT_BLANKING_HEIGHT(t);
|
||
|
}
|
||
|
|
||
|
static inline unsigned vtotal(const struct v4l2_bt_timings *t)
|
||
|
{
|
||
|
return V4L2_DV_BT_FRAME_HEIGHT(t);
|
||
|
}
|
||
|
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static s32 adv_smbus_read_byte_data_check(struct i2c_client *client,
|
||
|
u8 command, bool check)
|
||
|
{
|
||
|
union i2c_smbus_data data;
|
||
|
|
||
|
if (!i2c_smbus_xfer(client->adapter, client->addr, client->flags,
|
||
|
I2C_SMBUS_READ, command,
|
||
|
I2C_SMBUS_BYTE_DATA, &data))
|
||
|
return data.byte;
|
||
|
if (check)
|
||
|
v4l_err(client, "error reading %02x, %02x\n",
|
||
|
client->addr, command);
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
static s32 adv_smbus_read_byte_data(struct i2c_client *client, u8 command)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < 3; i++) {
|
||
|
int ret = adv_smbus_read_byte_data_check(client, command, true);
|
||
|
|
||
|
if (ret >= 0) {
|
||
|
if (i)
|
||
|
v4l_err(client, "read ok after %d retries\n", i);
|
||
|
return ret;
|
||
|
}
|
||
|
}
|
||
|
v4l_err(client, "read failed\n");
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
static s32 adv_smbus_write_byte_data(struct i2c_client *client,
|
||
|
u8 command, u8 value)
|
||
|
{
|
||
|
union i2c_smbus_data data;
|
||
|
int err;
|
||
|
int i;
|
||
|
|
||
|
data.byte = value;
|
||
|
for (i = 0; i < 3; i++) {
|
||
|
err = i2c_smbus_xfer(client->adapter, client->addr,
|
||
|
client->flags,
|
||
|
I2C_SMBUS_WRITE, command,
|
||
|
I2C_SMBUS_BYTE_DATA, &data);
|
||
|
if (!err)
|
||
|
break;
|
||
|
}
|
||
|
if (err < 0)
|
||
|
v4l_err(client, "error writing %02x, %02x, %02x\n",
|
||
|
client->addr, command, value);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static void adv_smbus_write_byte_no_check(struct i2c_client *client,
|
||
|
u8 command, u8 value)
|
||
|
{
|
||
|
union i2c_smbus_data data;
|
||
|
data.byte = value;
|
||
|
|
||
|
i2c_smbus_xfer(client->adapter, client->addr,
|
||
|
client->flags,
|
||
|
I2C_SMBUS_WRITE, command,
|
||
|
I2C_SMBUS_BYTE_DATA, &data);
|
||
|
}
|
||
|
|
||
|
static s32 adv_smbus_write_i2c_block_data(struct i2c_client *client,
|
||
|
u8 command, unsigned length, const u8 *values)
|
||
|
{
|
||
|
union i2c_smbus_data data;
|
||
|
|
||
|
if (length > I2C_SMBUS_BLOCK_MAX)
|
||
|
length = I2C_SMBUS_BLOCK_MAX;
|
||
|
data.block[0] = length;
|
||
|
memcpy(data.block + 1, values, length);
|
||
|
return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
|
||
|
I2C_SMBUS_WRITE, command,
|
||
|
I2C_SMBUS_I2C_BLOCK_DATA, &data);
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static inline int io_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(client, reg);
|
||
|
}
|
||
|
|
||
|
static inline int io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(client, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int io_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return io_write(sd, reg, (io_read(sd, reg) & mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int io_write_clr_set(struct v4l2_subdev *sd,
|
||
|
u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return io_write(sd, reg, (io_read(sd, reg) & ~mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int avlink_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_avlink, reg);
|
||
|
}
|
||
|
|
||
|
static inline int avlink_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_avlink, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int cec_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_cec, reg);
|
||
|
}
|
||
|
|
||
|
static inline int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_cec, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int cec_write_clr_set(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return cec_write(sd, reg, (cec_read(sd, reg) & ~mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int infoframe_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_infoframe, reg);
|
||
|
}
|
||
|
|
||
|
static inline int infoframe_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_infoframe, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int sdp_io_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_sdp_io, reg);
|
||
|
}
|
||
|
|
||
|
static inline int sdp_io_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_sdp_io, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int sdp_io_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return sdp_io_write(sd, reg, (sdp_io_read(sd, reg) & mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int sdp_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_sdp, reg);
|
||
|
}
|
||
|
|
||
|
static inline int sdp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_sdp, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int sdp_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return sdp_write(sd, reg, (sdp_read(sd, reg) & mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int afe_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_afe, reg);
|
||
|
}
|
||
|
|
||
|
static inline int afe_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_afe, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int afe_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return afe_write(sd, reg, (afe_read(sd, reg) & mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int rep_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_repeater, reg);
|
||
|
}
|
||
|
|
||
|
static inline int rep_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_repeater, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int rep_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return rep_write(sd, reg, (rep_read(sd, reg) & mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int edid_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_edid, reg);
|
||
|
}
|
||
|
|
||
|
static inline int edid_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_edid, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int hdmi_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_hdmi, reg);
|
||
|
}
|
||
|
|
||
|
static inline int hdmi_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_hdmi, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int hdmi_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return hdmi_write(sd, reg, (hdmi_read(sd, reg) & mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int cp_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_cp, reg);
|
||
|
}
|
||
|
|
||
|
static inline int cp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_cp, reg, val);
|
||
|
}
|
||
|
|
||
|
static inline int cp_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, u8 val)
|
||
|
{
|
||
|
return cp_write(sd, reg, (cp_read(sd, reg) & mask) | val);
|
||
|
}
|
||
|
|
||
|
static inline int vdp_read(struct v4l2_subdev *sd, u8 reg)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_read_byte_data(state->i2c_vdp, reg);
|
||
|
}
|
||
|
|
||
|
static inline int vdp_write(struct v4l2_subdev *sd, u8 reg, u8 val)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return adv_smbus_write_byte_data(state->i2c_vdp, reg, val);
|
||
|
}
|
||
|
|
||
|
static void main_reset(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
|
||
|
|
||
|
adv_smbus_write_byte_no_check(client, 0xff, 0x80);
|
||
|
|
||
|
mdelay(5);
|
||
|
}
|
||
|
|
||
|
/* -----------------------------------------------------------------------------
|
||
|
* Format helpers
|
||
|
*/
|
||
|
|
||
|
static const struct adv7842_format_info adv7842_formats[] = {
|
||
|
{ MEDIA_BUS_FMT_RGB888_1X24, ADV7842_OP_CH_SEL_RGB, true, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_444 | ADV7842_OP_FORMAT_SEL_8BIT },
|
||
|
{ MEDIA_BUS_FMT_YUYV8_2X8, ADV7842_OP_CH_SEL_RGB, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422 | ADV7842_OP_FORMAT_SEL_8BIT },
|
||
|
{ MEDIA_BUS_FMT_YVYU8_2X8, ADV7842_OP_CH_SEL_RGB, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422 | ADV7842_OP_FORMAT_SEL_8BIT },
|
||
|
{ MEDIA_BUS_FMT_YUYV10_2X10, ADV7842_OP_CH_SEL_RGB, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422 | ADV7842_OP_FORMAT_SEL_10BIT },
|
||
|
{ MEDIA_BUS_FMT_YVYU10_2X10, ADV7842_OP_CH_SEL_RGB, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422 | ADV7842_OP_FORMAT_SEL_10BIT },
|
||
|
{ MEDIA_BUS_FMT_YUYV12_2X12, ADV7842_OP_CH_SEL_RGB, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422 | ADV7842_OP_FORMAT_SEL_12BIT },
|
||
|
{ MEDIA_BUS_FMT_YVYU12_2X12, ADV7842_OP_CH_SEL_RGB, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422 | ADV7842_OP_FORMAT_SEL_12BIT },
|
||
|
{ MEDIA_BUS_FMT_UYVY8_1X16, ADV7842_OP_CH_SEL_RBG, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_8BIT },
|
||
|
{ MEDIA_BUS_FMT_VYUY8_1X16, ADV7842_OP_CH_SEL_RBG, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_8BIT },
|
||
|
{ MEDIA_BUS_FMT_YUYV8_1X16, ADV7842_OP_CH_SEL_RGB, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_8BIT },
|
||
|
{ MEDIA_BUS_FMT_YVYU8_1X16, ADV7842_OP_CH_SEL_RGB, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_8BIT },
|
||
|
{ MEDIA_BUS_FMT_UYVY10_1X20, ADV7842_OP_CH_SEL_RBG, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_10BIT },
|
||
|
{ MEDIA_BUS_FMT_VYUY10_1X20, ADV7842_OP_CH_SEL_RBG, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_10BIT },
|
||
|
{ MEDIA_BUS_FMT_YUYV10_1X20, ADV7842_OP_CH_SEL_RGB, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_10BIT },
|
||
|
{ MEDIA_BUS_FMT_YVYU10_1X20, ADV7842_OP_CH_SEL_RGB, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_10BIT },
|
||
|
{ MEDIA_BUS_FMT_UYVY12_1X24, ADV7842_OP_CH_SEL_RBG, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_12BIT },
|
||
|
{ MEDIA_BUS_FMT_VYUY12_1X24, ADV7842_OP_CH_SEL_RBG, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_12BIT },
|
||
|
{ MEDIA_BUS_FMT_YUYV12_1X24, ADV7842_OP_CH_SEL_RGB, false, false,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_12BIT },
|
||
|
{ MEDIA_BUS_FMT_YVYU12_1X24, ADV7842_OP_CH_SEL_RGB, false, true,
|
||
|
ADV7842_OP_MODE_SEL_SDR_422_2X | ADV7842_OP_FORMAT_SEL_12BIT },
|
||
|
};
|
||
|
|
||
|
static const struct adv7842_format_info *
|
||
|
adv7842_format_info(struct adv7842_state *state, u32 code)
|
||
|
{
|
||
|
unsigned int i;
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(adv7842_formats); ++i) {
|
||
|
if (adv7842_formats[i].code == code)
|
||
|
return &adv7842_formats[i];
|
||
|
}
|
||
|
|
||
|
return NULL;
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static inline bool is_analog_input(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return ((state->mode == ADV7842_MODE_RGB) ||
|
||
|
(state->mode == ADV7842_MODE_COMP));
|
||
|
}
|
||
|
|
||
|
static inline bool is_digital_input(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
return state->mode == ADV7842_MODE_HDMI;
|
||
|
}
|
||
|
|
||
|
static const struct v4l2_dv_timings_cap adv7842_timings_cap_analog = {
|
||
|
.type = V4L2_DV_BT_656_1120,
|
||
|
/* keep this initialization for compatibility with GCC < 4.4.6 */
|
||
|
.reserved = { 0 },
|
||
|
V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 170000000,
|
||
|
V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
||
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
|
||
|
V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
|
||
|
V4L2_DV_BT_CAP_CUSTOM)
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_dv_timings_cap adv7842_timings_cap_digital = {
|
||
|
.type = V4L2_DV_BT_656_1120,
|
||
|
/* keep this initialization for compatibility with GCC < 4.4.6 */
|
||
|
.reserved = { 0 },
|
||
|
V4L2_INIT_BT_TIMINGS(640, 1920, 350, 1200, 25000000, 225000000,
|
||
|
V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
||
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT,
|
||
|
V4L2_DV_BT_CAP_PROGRESSIVE | V4L2_DV_BT_CAP_REDUCED_BLANKING |
|
||
|
V4L2_DV_BT_CAP_CUSTOM)
|
||
|
};
|
||
|
|
||
|
static inline const struct v4l2_dv_timings_cap *
|
||
|
adv7842_get_dv_timings_cap(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
return is_digital_input(sd) ? &adv7842_timings_cap_digital :
|
||
|
&adv7842_timings_cap_analog;
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static u16 adv7842_read_cable_det(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
u8 reg = io_read(sd, 0x6f);
|
||
|
u16 val = 0;
|
||
|
|
||
|
if (reg & 0x02)
|
||
|
val |= 1; /* port A */
|
||
|
if (reg & 0x01)
|
||
|
val |= 2; /* port B */
|
||
|
return val;
|
||
|
}
|
||
|
|
||
|
static void adv7842_delayed_work_enable_hotplug(struct work_struct *work)
|
||
|
{
|
||
|
struct delayed_work *dwork = to_delayed_work(work);
|
||
|
struct adv7842_state *state = container_of(dwork,
|
||
|
struct adv7842_state, delayed_work_enable_hotplug);
|
||
|
struct v4l2_subdev *sd = &state->sd;
|
||
|
int present = state->hdmi_edid.present;
|
||
|
u8 mask = 0;
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s: enable hotplug on ports: 0x%x\n",
|
||
|
__func__, present);
|
||
|
|
||
|
if (present & (0x04 << ADV7842_EDID_PORT_A))
|
||
|
mask |= 0x20;
|
||
|
if (present & (0x04 << ADV7842_EDID_PORT_B))
|
||
|
mask |= 0x10;
|
||
|
io_write_and_or(sd, 0x20, 0xcf, mask);
|
||
|
}
|
||
|
|
||
|
static int edid_write_vga_segment(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
const u8 *val = state->vga_edid.edid;
|
||
|
int err = 0;
|
||
|
int i;
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s: write EDID on VGA port\n", __func__);
|
||
|
|
||
|
/* HPA disable on port A and B */
|
||
|
io_write_and_or(sd, 0x20, 0xcf, 0x00);
|
||
|
|
||
|
/* Disable I2C access to internal EDID ram from VGA DDC port */
|
||
|
rep_write_and_or(sd, 0x7f, 0x7f, 0x00);
|
||
|
|
||
|
/* edid segment pointer '1' for VGA port */
|
||
|
rep_write_and_or(sd, 0x77, 0xef, 0x10);
|
||
|
|
||
|
for (i = 0; !err && i < 256; i += I2C_SMBUS_BLOCK_MAX)
|
||
|
err = adv_smbus_write_i2c_block_data(state->i2c_edid, i,
|
||
|
I2C_SMBUS_BLOCK_MAX, val + i);
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
/* Calculates the checksums and enables I2C access
|
||
|
* to internal EDID ram from VGA DDC port.
|
||
|
*/
|
||
|
rep_write_and_or(sd, 0x7f, 0x7f, 0x80);
|
||
|
|
||
|
for (i = 0; i < 1000; i++) {
|
||
|
if (rep_read(sd, 0x79) & 0x20)
|
||
|
break;
|
||
|
mdelay(1);
|
||
|
}
|
||
|
if (i == 1000) {
|
||
|
v4l_err(client, "error enabling edid on VGA port\n");
|
||
|
return -EIO;
|
||
|
}
|
||
|
|
||
|
/* enable hotplug after 200 ms */
|
||
|
schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 5);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int edid_write_hdmi_segment(struct v4l2_subdev *sd, u8 port)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
const u8 *edid = state->hdmi_edid.edid;
|
||
|
int spa_loc;
|
||
|
u16 pa;
|
||
|
int err = 0;
|
||
|
int i;
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s: write EDID on port %c\n",
|
||
|
__func__, (port == ADV7842_EDID_PORT_A) ? 'A' : 'B');
|
||
|
|
||
|
/* HPA disable on port A and B */
|
||
|
io_write_and_or(sd, 0x20, 0xcf, 0x00);
|
||
|
|
||
|
/* Disable I2C access to internal EDID ram from HDMI DDC ports */
|
||
|
rep_write_and_or(sd, 0x77, 0xf3, 0x00);
|
||
|
|
||
|
if (!state->hdmi_edid.present) {
|
||
|
cec_phys_addr_invalidate(state->cec_adap);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
pa = v4l2_get_edid_phys_addr(edid, 256, &spa_loc);
|
||
|
err = v4l2_phys_addr_validate(pa, &pa, NULL);
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
/*
|
||
|
* Return an error if no location of the source physical address
|
||
|
* was found.
|
||
|
*/
|
||
|
if (spa_loc == 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
/* edid segment pointer '0' for HDMI ports */
|
||
|
rep_write_and_or(sd, 0x77, 0xef, 0x00);
|
||
|
|
||
|
for (i = 0; !err && i < 256; i += I2C_SMBUS_BLOCK_MAX)
|
||
|
err = adv_smbus_write_i2c_block_data(state->i2c_edid, i,
|
||
|
I2C_SMBUS_BLOCK_MAX, edid + i);
|
||
|
if (err)
|
||
|
return err;
|
||
|
|
||
|
if (port == ADV7842_EDID_PORT_A) {
|
||
|
rep_write(sd, 0x72, edid[spa_loc]);
|
||
|
rep_write(sd, 0x73, edid[spa_loc + 1]);
|
||
|
} else {
|
||
|
rep_write(sd, 0x74, edid[spa_loc]);
|
||
|
rep_write(sd, 0x75, edid[spa_loc + 1]);
|
||
|
}
|
||
|
rep_write(sd, 0x76, spa_loc & 0xff);
|
||
|
rep_write_and_or(sd, 0x77, 0xbf, (spa_loc >> 2) & 0x40);
|
||
|
|
||
|
/* Calculates the checksums and enables I2C access to internal
|
||
|
* EDID ram from HDMI DDC ports
|
||
|
*/
|
||
|
rep_write_and_or(sd, 0x77, 0xf3, state->hdmi_edid.present);
|
||
|
|
||
|
for (i = 0; i < 1000; i++) {
|
||
|
if (rep_read(sd, 0x7d) & state->hdmi_edid.present)
|
||
|
break;
|
||
|
mdelay(1);
|
||
|
}
|
||
|
if (i == 1000) {
|
||
|
v4l_err(client, "error enabling edid on port %c\n",
|
||
|
(port == ADV7842_EDID_PORT_A) ? 'A' : 'B');
|
||
|
return -EIO;
|
||
|
}
|
||
|
cec_s_phys_addr(state->cec_adap, pa, false);
|
||
|
|
||
|
/* enable hotplug after 200 ms */
|
||
|
schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 5);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
||
|
static void adv7842_inv_register(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
v4l2_info(sd, "0x000-0x0ff: IO Map\n");
|
||
|
v4l2_info(sd, "0x100-0x1ff: AVLink Map\n");
|
||
|
v4l2_info(sd, "0x200-0x2ff: CEC Map\n");
|
||
|
v4l2_info(sd, "0x300-0x3ff: InfoFrame Map\n");
|
||
|
v4l2_info(sd, "0x400-0x4ff: SDP_IO Map\n");
|
||
|
v4l2_info(sd, "0x500-0x5ff: SDP Map\n");
|
||
|
v4l2_info(sd, "0x600-0x6ff: AFE Map\n");
|
||
|
v4l2_info(sd, "0x700-0x7ff: Repeater Map\n");
|
||
|
v4l2_info(sd, "0x800-0x8ff: EDID Map\n");
|
||
|
v4l2_info(sd, "0x900-0x9ff: HDMI Map\n");
|
||
|
v4l2_info(sd, "0xa00-0xaff: CP Map\n");
|
||
|
v4l2_info(sd, "0xb00-0xbff: VDP Map\n");
|
||
|
}
|
||
|
|
||
|
static int adv7842_g_register(struct v4l2_subdev *sd,
|
||
|
struct v4l2_dbg_register *reg)
|
||
|
{
|
||
|
reg->size = 1;
|
||
|
switch (reg->reg >> 8) {
|
||
|
case 0:
|
||
|
reg->val = io_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 1:
|
||
|
reg->val = avlink_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 2:
|
||
|
reg->val = cec_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 3:
|
||
|
reg->val = infoframe_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 4:
|
||
|
reg->val = sdp_io_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 5:
|
||
|
reg->val = sdp_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 6:
|
||
|
reg->val = afe_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 7:
|
||
|
reg->val = rep_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 8:
|
||
|
reg->val = edid_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 9:
|
||
|
reg->val = hdmi_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 0xa:
|
||
|
reg->val = cp_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
case 0xb:
|
||
|
reg->val = vdp_read(sd, reg->reg & 0xff);
|
||
|
break;
|
||
|
default:
|
||
|
v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
|
||
|
adv7842_inv_register(sd);
|
||
|
break;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_s_register(struct v4l2_subdev *sd,
|
||
|
const struct v4l2_dbg_register *reg)
|
||
|
{
|
||
|
u8 val = reg->val & 0xff;
|
||
|
|
||
|
switch (reg->reg >> 8) {
|
||
|
case 0:
|
||
|
io_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 1:
|
||
|
avlink_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 2:
|
||
|
cec_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 3:
|
||
|
infoframe_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 4:
|
||
|
sdp_io_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 5:
|
||
|
sdp_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 6:
|
||
|
afe_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 7:
|
||
|
rep_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 8:
|
||
|
edid_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 9:
|
||
|
hdmi_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 0xa:
|
||
|
cp_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
case 0xb:
|
||
|
vdp_write(sd, reg->reg & 0xff, val);
|
||
|
break;
|
||
|
default:
|
||
|
v4l2_info(sd, "Register %03llx not supported\n", reg->reg);
|
||
|
adv7842_inv_register(sd);
|
||
|
break;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
static int adv7842_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
u16 cable_det = adv7842_read_cable_det(sd);
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s: 0x%x\n", __func__, cable_det);
|
||
|
|
||
|
return v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl, cable_det);
|
||
|
}
|
||
|
|
||
|
static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd,
|
||
|
u8 prim_mode,
|
||
|
const struct adv7842_video_standards *predef_vid_timings,
|
||
|
const struct v4l2_dv_timings *timings)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; predef_vid_timings[i].timings.bt.width; i++) {
|
||
|
if (!v4l2_match_dv_timings(timings, &predef_vid_timings[i].timings,
|
||
|
is_digital_input(sd) ? 250000 : 1000000, false))
|
||
|
continue;
|
||
|
/* video std */
|
||
|
io_write(sd, 0x00, predef_vid_timings[i].vid_std);
|
||
|
/* v_freq and prim mode */
|
||
|
io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) + prim_mode);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
static int configure_predefined_video_timings(struct v4l2_subdev *sd,
|
||
|
struct v4l2_dv_timings *timings)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
int err;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s\n", __func__);
|
||
|
|
||
|
/* reset to default values */
|
||
|
io_write(sd, 0x16, 0x43);
|
||
|
io_write(sd, 0x17, 0x5a);
|
||
|
/* disable embedded syncs for auto graphics mode */
|
||
|
cp_write_and_or(sd, 0x81, 0xef, 0x00);
|
||
|
cp_write(sd, 0x26, 0x00);
|
||
|
cp_write(sd, 0x27, 0x00);
|
||
|
cp_write(sd, 0x28, 0x00);
|
||
|
cp_write(sd, 0x29, 0x00);
|
||
|
cp_write(sd, 0x8f, 0x40);
|
||
|
cp_write(sd, 0x90, 0x00);
|
||
|
cp_write(sd, 0xa5, 0x00);
|
||
|
cp_write(sd, 0xa6, 0x00);
|
||
|
cp_write(sd, 0xa7, 0x00);
|
||
|
cp_write(sd, 0xab, 0x00);
|
||
|
cp_write(sd, 0xac, 0x00);
|
||
|
|
||
|
switch (state->mode) {
|
||
|
case ADV7842_MODE_COMP:
|
||
|
case ADV7842_MODE_RGB:
|
||
|
err = find_and_set_predefined_video_timings(sd,
|
||
|
0x01, adv7842_prim_mode_comp, timings);
|
||
|
if (err)
|
||
|
err = find_and_set_predefined_video_timings(sd,
|
||
|
0x02, adv7842_prim_mode_gr, timings);
|
||
|
break;
|
||
|
case ADV7842_MODE_HDMI:
|
||
|
err = find_and_set_predefined_video_timings(sd,
|
||
|
0x05, adv7842_prim_mode_hdmi_comp, timings);
|
||
|
if (err)
|
||
|
err = find_and_set_predefined_video_timings(sd,
|
||
|
0x06, adv7842_prim_mode_hdmi_gr, timings);
|
||
|
break;
|
||
|
default:
|
||
|
v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
|
||
|
__func__, state->mode);
|
||
|
err = -1;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static void configure_custom_video_timings(struct v4l2_subdev *sd,
|
||
|
const struct v4l2_bt_timings *bt)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
u32 width = htotal(bt);
|
||
|
u32 height = vtotal(bt);
|
||
|
u16 cp_start_sav = bt->hsync + bt->hbackporch - 4;
|
||
|
u16 cp_start_eav = width - bt->hfrontporch;
|
||
|
u16 cp_start_vbi = height - bt->vfrontporch + 1;
|
||
|
u16 cp_end_vbi = bt->vsync + bt->vbackporch + 1;
|
||
|
u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ?
|
||
|
((width * (ADV7842_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0;
|
||
|
const u8 pll[2] = {
|
||
|
0xc0 | ((width >> 8) & 0x1f),
|
||
|
width & 0xff
|
||
|
};
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s\n", __func__);
|
||
|
|
||
|
switch (state->mode) {
|
||
|
case ADV7842_MODE_COMP:
|
||
|
case ADV7842_MODE_RGB:
|
||
|
/* auto graphics */
|
||
|
io_write(sd, 0x00, 0x07); /* video std */
|
||
|
io_write(sd, 0x01, 0x02); /* prim mode */
|
||
|
/* enable embedded syncs for auto graphics mode */
|
||
|
cp_write_and_or(sd, 0x81, 0xef, 0x10);
|
||
|
|
||
|
/* Should only be set in auto-graphics mode [REF_02, p. 91-92] */
|
||
|
/* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */
|
||
|
/* IO-map reg. 0x16 and 0x17 should be written in sequence */
|
||
|
if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) {
|
||
|
v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n");
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* active video - horizontal timing */
|
||
|
cp_write(sd, 0x26, (cp_start_sav >> 8) & 0xf);
|
||
|
cp_write(sd, 0x27, (cp_start_sav & 0xff));
|
||
|
cp_write(sd, 0x28, (cp_start_eav >> 8) & 0xf);
|
||
|
cp_write(sd, 0x29, (cp_start_eav & 0xff));
|
||
|
|
||
|
/* active video - vertical timing */
|
||
|
cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff);
|
||
|
cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) |
|
||
|
((cp_end_vbi >> 8) & 0xf));
|
||
|
cp_write(sd, 0xa7, cp_end_vbi & 0xff);
|
||
|
break;
|
||
|
case ADV7842_MODE_HDMI:
|
||
|
/* set default prim_mode/vid_std for HDMI
|
||
|
according to [REF_03, c. 4.2] */
|
||
|
io_write(sd, 0x00, 0x02); /* video std */
|
||
|
io_write(sd, 0x01, 0x06); /* prim mode */
|
||
|
break;
|
||
|
default:
|
||
|
v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
|
||
|
__func__, state->mode);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7);
|
||
|
cp_write(sd, 0x90, ch1_fr_ll & 0xff);
|
||
|
cp_write(sd, 0xab, (height >> 4) & 0xff);
|
||
|
cp_write(sd, 0xac, (height & 0x0f) << 4);
|
||
|
}
|
||
|
|
||
|
static void adv7842_set_offset(struct v4l2_subdev *sd, bool auto_offset, u16 offset_a, u16 offset_b, u16 offset_c)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
u8 offset_buf[4];
|
||
|
|
||
|
if (auto_offset) {
|
||
|
offset_a = 0x3ff;
|
||
|
offset_b = 0x3ff;
|
||
|
offset_c = 0x3ff;
|
||
|
}
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s: %s offset: a = 0x%x, b = 0x%x, c = 0x%x\n",
|
||
|
__func__, auto_offset ? "Auto" : "Manual",
|
||
|
offset_a, offset_b, offset_c);
|
||
|
|
||
|
offset_buf[0]= (cp_read(sd, 0x77) & 0xc0) | ((offset_a & 0x3f0) >> 4);
|
||
|
offset_buf[1] = ((offset_a & 0x00f) << 4) | ((offset_b & 0x3c0) >> 6);
|
||
|
offset_buf[2] = ((offset_b & 0x03f) << 2) | ((offset_c & 0x300) >> 8);
|
||
|
offset_buf[3] = offset_c & 0x0ff;
|
||
|
|
||
|
/* Registers must be written in this order with no i2c access in between */
|
||
|
if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x77, 4, offset_buf))
|
||
|
v4l2_err(sd, "%s: i2c error writing to CP reg 0x77, 0x78, 0x79, 0x7a\n", __func__);
|
||
|
}
|
||
|
|
||
|
static void adv7842_set_gain(struct v4l2_subdev *sd, bool auto_gain, u16 gain_a, u16 gain_b, u16 gain_c)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
u8 gain_buf[4];
|
||
|
u8 gain_man = 1;
|
||
|
u8 agc_mode_man = 1;
|
||
|
|
||
|
if (auto_gain) {
|
||
|
gain_man = 0;
|
||
|
agc_mode_man = 0;
|
||
|
gain_a = 0x100;
|
||
|
gain_b = 0x100;
|
||
|
gain_c = 0x100;
|
||
|
}
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s: %s gain: a = 0x%x, b = 0x%x, c = 0x%x\n",
|
||
|
__func__, auto_gain ? "Auto" : "Manual",
|
||
|
gain_a, gain_b, gain_c);
|
||
|
|
||
|
gain_buf[0] = ((gain_man << 7) | (agc_mode_man << 6) | ((gain_a & 0x3f0) >> 4));
|
||
|
gain_buf[1] = (((gain_a & 0x00f) << 4) | ((gain_b & 0x3c0) >> 6));
|
||
|
gain_buf[2] = (((gain_b & 0x03f) << 2) | ((gain_c & 0x300) >> 8));
|
||
|
gain_buf[3] = ((gain_c & 0x0ff));
|
||
|
|
||
|
/* Registers must be written in this order with no i2c access in between */
|
||
|
if (adv_smbus_write_i2c_block_data(state->i2c_cp, 0x73, 4, gain_buf))
|
||
|
v4l2_err(sd, "%s: i2c error writing to CP reg 0x73, 0x74, 0x75, 0x76\n", __func__);
|
||
|
}
|
||
|
|
||
|
static void set_rgb_quantization_range(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
bool rgb_output = io_read(sd, 0x02) & 0x02;
|
||
|
bool hdmi_signal = hdmi_read(sd, 0x05) & 0x80;
|
||
|
u8 y = HDMI_COLORSPACE_RGB;
|
||
|
|
||
|
if (hdmi_signal && (io_read(sd, 0x60) & 1))
|
||
|
y = infoframe_read(sd, 0x01) >> 5;
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s: RGB quantization range: %d, RGB out: %d, HDMI: %d\n",
|
||
|
__func__, state->rgb_quantization_range,
|
||
|
rgb_output, hdmi_signal);
|
||
|
|
||
|
adv7842_set_gain(sd, true, 0x0, 0x0, 0x0);
|
||
|
adv7842_set_offset(sd, true, 0x0, 0x0, 0x0);
|
||
|
io_write_clr_set(sd, 0x02, 0x04, rgb_output ? 0 : 4);
|
||
|
|
||
|
switch (state->rgb_quantization_range) {
|
||
|
case V4L2_DV_RGB_RANGE_AUTO:
|
||
|
if (state->mode == ADV7842_MODE_RGB) {
|
||
|
/* Receiving analog RGB signal
|
||
|
* Set RGB full range (0-255) */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x10);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (state->mode == ADV7842_MODE_COMP) {
|
||
|
/* Receiving analog YPbPr signal
|
||
|
* Set automode */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0xf0);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (hdmi_signal) {
|
||
|
/* Receiving HDMI signal
|
||
|
* Set automode */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0xf0);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Receiving DVI-D signal
|
||
|
* ADV7842 selects RGB limited range regardless of
|
||
|
* input format (CE/IT) in automatic mode */
|
||
|
if (state->timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO) {
|
||
|
/* RGB limited range (16-235) */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x00);
|
||
|
} else {
|
||
|
/* RGB full range (0-255) */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x10);
|
||
|
|
||
|
if (is_digital_input(sd) && rgb_output) {
|
||
|
adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
|
||
|
} else {
|
||
|
adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
|
||
|
adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
|
||
|
}
|
||
|
}
|
||
|
break;
|
||
|
case V4L2_DV_RGB_RANGE_LIMITED:
|
||
|
if (state->mode == ADV7842_MODE_COMP) {
|
||
|
/* YCrCb limited range (16-235) */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x20);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (y != HDMI_COLORSPACE_RGB)
|
||
|
break;
|
||
|
|
||
|
/* RGB limited range (16-235) */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x00);
|
||
|
|
||
|
break;
|
||
|
case V4L2_DV_RGB_RANGE_FULL:
|
||
|
if (state->mode == ADV7842_MODE_COMP) {
|
||
|
/* YCrCb full range (0-255) */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x60);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
if (y != HDMI_COLORSPACE_RGB)
|
||
|
break;
|
||
|
|
||
|
/* RGB full range (0-255) */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x10);
|
||
|
|
||
|
if (is_analog_input(sd) || hdmi_signal)
|
||
|
break;
|
||
|
|
||
|
/* Adjust gain/offset for DVI-D signals only */
|
||
|
if (rgb_output) {
|
||
|
adv7842_set_offset(sd, false, 0x40, 0x40, 0x40);
|
||
|
} else {
|
||
|
adv7842_set_gain(sd, false, 0xe0, 0xe0, 0xe0);
|
||
|
adv7842_set_offset(sd, false, 0x70, 0x70, 0x70);
|
||
|
}
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int adv7842_s_ctrl(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
struct v4l2_subdev *sd = to_sd(ctrl);
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
/* TODO SDP ctrls
|
||
|
contrast/brightness/hue/free run is acting a bit strange,
|
||
|
not sure if sdp csc is correct.
|
||
|
*/
|
||
|
switch (ctrl->id) {
|
||
|
/* standard ctrls */
|
||
|
case V4L2_CID_BRIGHTNESS:
|
||
|
cp_write(sd, 0x3c, ctrl->val);
|
||
|
sdp_write(sd, 0x14, ctrl->val);
|
||
|
/* ignore lsb sdp 0x17[3:2] */
|
||
|
return 0;
|
||
|
case V4L2_CID_CONTRAST:
|
||
|
cp_write(sd, 0x3a, ctrl->val);
|
||
|
sdp_write(sd, 0x13, ctrl->val);
|
||
|
/* ignore lsb sdp 0x17[1:0] */
|
||
|
return 0;
|
||
|
case V4L2_CID_SATURATION:
|
||
|
cp_write(sd, 0x3b, ctrl->val);
|
||
|
sdp_write(sd, 0x15, ctrl->val);
|
||
|
/* ignore lsb sdp 0x17[5:4] */
|
||
|
return 0;
|
||
|
case V4L2_CID_HUE:
|
||
|
cp_write(sd, 0x3d, ctrl->val);
|
||
|
sdp_write(sd, 0x16, ctrl->val);
|
||
|
/* ignore lsb sdp 0x17[7:6] */
|
||
|
return 0;
|
||
|
/* custom ctrls */
|
||
|
case V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE:
|
||
|
afe_write(sd, 0xc8, ctrl->val);
|
||
|
return 0;
|
||
|
case V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL:
|
||
|
cp_write_and_or(sd, 0xbf, ~0x04, (ctrl->val << 2));
|
||
|
sdp_write_and_or(sd, 0xdd, ~0x04, (ctrl->val << 2));
|
||
|
return 0;
|
||
|
case V4L2_CID_ADV_RX_FREE_RUN_COLOR: {
|
||
|
u8 R = (ctrl->val & 0xff0000) >> 16;
|
||
|
u8 G = (ctrl->val & 0x00ff00) >> 8;
|
||
|
u8 B = (ctrl->val & 0x0000ff);
|
||
|
/* RGB -> YUV, numerical approximation */
|
||
|
int Y = 66 * R + 129 * G + 25 * B;
|
||
|
int U = -38 * R - 74 * G + 112 * B;
|
||
|
int V = 112 * R - 94 * G - 18 * B;
|
||
|
|
||
|
/* Scale down to 8 bits with rounding */
|
||
|
Y = (Y + 128) >> 8;
|
||
|
U = (U + 128) >> 8;
|
||
|
V = (V + 128) >> 8;
|
||
|
/* make U,V positive */
|
||
|
Y += 16;
|
||
|
U += 128;
|
||
|
V += 128;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "R %x, G %x, B %x\n", R, G, B);
|
||
|
v4l2_dbg(1, debug, sd, "Y %x, U %x, V %x\n", Y, U, V);
|
||
|
|
||
|
/* CP */
|
||
|
cp_write(sd, 0xc1, R);
|
||
|
cp_write(sd, 0xc0, G);
|
||
|
cp_write(sd, 0xc2, B);
|
||
|
/* SDP */
|
||
|
sdp_write(sd, 0xde, Y);
|
||
|
sdp_write(sd, 0xdf, (V & 0xf0) | ((U >> 4) & 0x0f));
|
||
|
return 0;
|
||
|
}
|
||
|
case V4L2_CID_DV_RX_RGB_RANGE:
|
||
|
state->rgb_quantization_range = ctrl->val;
|
||
|
set_rgb_quantization_range(sd);
|
||
|
return 0;
|
||
|
}
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int adv7842_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
|
||
|
{
|
||
|
struct v4l2_subdev *sd = to_sd(ctrl);
|
||
|
|
||
|
if (ctrl->id == V4L2_CID_DV_RX_IT_CONTENT_TYPE) {
|
||
|
ctrl->val = V4L2_DV_IT_CONTENT_TYPE_NO_ITC;
|
||
|
if ((io_read(sd, 0x60) & 1) && (infoframe_read(sd, 0x03) & 0x80))
|
||
|
ctrl->val = (infoframe_read(sd, 0x05) >> 4) & 3;
|
||
|
return 0;
|
||
|
}
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static inline bool no_power(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
return io_read(sd, 0x0c) & 0x24;
|
||
|
}
|
||
|
|
||
|
static inline bool no_cp_signal(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
return ((cp_read(sd, 0xb5) & 0xd0) != 0xd0) || !(cp_read(sd, 0xb1) & 0x80);
|
||
|
}
|
||
|
|
||
|
static inline bool is_hdmi(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
return hdmi_read(sd, 0x05) & 0x80;
|
||
|
}
|
||
|
|
||
|
static int adv7842_g_input_status(struct v4l2_subdev *sd, u32 *status)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
*status = 0;
|
||
|
|
||
|
if (io_read(sd, 0x0c) & 0x24)
|
||
|
*status |= V4L2_IN_ST_NO_POWER;
|
||
|
|
||
|
if (state->mode == ADV7842_MODE_SDP) {
|
||
|
/* status from SDP block */
|
||
|
if (!(sdp_read(sd, 0x5A) & 0x01))
|
||
|
*status |= V4L2_IN_ST_NO_SIGNAL;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s: SDP status = 0x%x\n",
|
||
|
__func__, *status);
|
||
|
return 0;
|
||
|
}
|
||
|
/* status from CP block */
|
||
|
if ((cp_read(sd, 0xb5) & 0xd0) != 0xd0 ||
|
||
|
!(cp_read(sd, 0xb1) & 0x80))
|
||
|
/* TODO channel 2 */
|
||
|
*status |= V4L2_IN_ST_NO_SIGNAL;
|
||
|
|
||
|
if (is_digital_input(sd) && ((io_read(sd, 0x74) & 0x03) != 0x03))
|
||
|
*status |= V4L2_IN_ST_NO_SIGNAL;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s: CP status = 0x%x\n",
|
||
|
__func__, *status);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
struct stdi_readback {
|
||
|
u16 bl, lcf, lcvs;
|
||
|
u8 hs_pol, vs_pol;
|
||
|
bool interlaced;
|
||
|
};
|
||
|
|
||
|
static int stdi2dv_timings(struct v4l2_subdev *sd,
|
||
|
struct stdi_readback *stdi,
|
||
|
struct v4l2_dv_timings *timings)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
u32 hfreq = (ADV7842_fsc * 8) / stdi->bl;
|
||
|
u32 pix_clk;
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; v4l2_dv_timings_presets[i].bt.width; i++) {
|
||
|
const struct v4l2_bt_timings *bt = &v4l2_dv_timings_presets[i].bt;
|
||
|
|
||
|
if (!v4l2_valid_dv_timings(&v4l2_dv_timings_presets[i],
|
||
|
adv7842_get_dv_timings_cap(sd),
|
||
|
adv7842_check_dv_timings, NULL))
|
||
|
continue;
|
||
|
if (vtotal(bt) != stdi->lcf + 1)
|
||
|
continue;
|
||
|
if (bt->vsync != stdi->lcvs)
|
||
|
continue;
|
||
|
|
||
|
pix_clk = hfreq * htotal(bt);
|
||
|
|
||
|
if ((pix_clk < bt->pixelclock + 1000000) &&
|
||
|
(pix_clk > bt->pixelclock - 1000000)) {
|
||
|
*timings = v4l2_dv_timings_presets[i];
|
||
|
return 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (v4l2_detect_cvt(stdi->lcf + 1, hfreq, stdi->lcvs, 0,
|
||
|
(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
|
||
|
(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
|
||
|
false, timings))
|
||
|
return 0;
|
||
|
if (v4l2_detect_gtf(stdi->lcf + 1, hfreq, stdi->lcvs,
|
||
|
(stdi->hs_pol == '+' ? V4L2_DV_HSYNC_POS_POL : 0) |
|
||
|
(stdi->vs_pol == '+' ? V4L2_DV_VSYNC_POS_POL : 0),
|
||
|
false, state->aspect_ratio, timings))
|
||
|
return 0;
|
||
|
|
||
|
v4l2_dbg(2, debug, sd,
|
||
|
"%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n",
|
||
|
__func__, stdi->lcvs, stdi->lcf, stdi->bl,
|
||
|
stdi->hs_pol, stdi->vs_pol);
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
static int read_stdi(struct v4l2_subdev *sd, struct stdi_readback *stdi)
|
||
|
{
|
||
|
u32 status;
|
||
|
|
||
|
adv7842_g_input_status(sd, &status);
|
||
|
if (status & V4L2_IN_ST_NO_SIGNAL) {
|
||
|
v4l2_dbg(2, debug, sd, "%s: no signal\n", __func__);
|
||
|
return -ENOLINK;
|
||
|
}
|
||
|
|
||
|
stdi->bl = ((cp_read(sd, 0xb1) & 0x3f) << 8) | cp_read(sd, 0xb2);
|
||
|
stdi->lcf = ((cp_read(sd, 0xb3) & 0x7) << 8) | cp_read(sd, 0xb4);
|
||
|
stdi->lcvs = cp_read(sd, 0xb3) >> 3;
|
||
|
|
||
|
if ((cp_read(sd, 0xb5) & 0x80) && ((cp_read(sd, 0xb5) & 0x03) == 0x01)) {
|
||
|
stdi->hs_pol = ((cp_read(sd, 0xb5) & 0x10) ?
|
||
|
((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x');
|
||
|
stdi->vs_pol = ((cp_read(sd, 0xb5) & 0x40) ?
|
||
|
((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x');
|
||
|
} else {
|
||
|
stdi->hs_pol = 'x';
|
||
|
stdi->vs_pol = 'x';
|
||
|
}
|
||
|
stdi->interlaced = (cp_read(sd, 0xb1) & 0x40) ? true : false;
|
||
|
|
||
|
if (stdi->lcf < 239 || stdi->bl < 8 || stdi->bl == 0x3fff) {
|
||
|
v4l2_dbg(2, debug, sd, "%s: invalid signal\n", __func__);
|
||
|
return -ENOLINK;
|
||
|
}
|
||
|
|
||
|
v4l2_dbg(2, debug, sd,
|
||
|
"%s: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, %chsync, %cvsync, %s\n",
|
||
|
__func__, stdi->lcf, stdi->bl, stdi->lcvs,
|
||
|
stdi->hs_pol, stdi->vs_pol,
|
||
|
stdi->interlaced ? "interlaced" : "progressive");
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_enum_dv_timings(struct v4l2_subdev *sd,
|
||
|
struct v4l2_enum_dv_timings *timings)
|
||
|
{
|
||
|
if (timings->pad != 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
return v4l2_enum_dv_timings_cap(timings,
|
||
|
adv7842_get_dv_timings_cap(sd), adv7842_check_dv_timings, NULL);
|
||
|
}
|
||
|
|
||
|
static int adv7842_dv_timings_cap(struct v4l2_subdev *sd,
|
||
|
struct v4l2_dv_timings_cap *cap)
|
||
|
{
|
||
|
if (cap->pad != 0)
|
||
|
return -EINVAL;
|
||
|
|
||
|
*cap = *adv7842_get_dv_timings_cap(sd);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* Fill the optional fields .standards and .flags in struct v4l2_dv_timings
|
||
|
if the format is listed in adv7842_timings[] */
|
||
|
static void adv7842_fill_optional_dv_timings_fields(struct v4l2_subdev *sd,
|
||
|
struct v4l2_dv_timings *timings)
|
||
|
{
|
||
|
v4l2_find_dv_timings_cap(timings, adv7842_get_dv_timings_cap(sd),
|
||
|
is_digital_input(sd) ? 250000 : 1000000,
|
||
|
adv7842_check_dv_timings, NULL);
|
||
|
}
|
||
|
|
||
|
static int adv7842_query_dv_timings(struct v4l2_subdev *sd,
|
||
|
struct v4l2_dv_timings *timings)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct v4l2_bt_timings *bt = &timings->bt;
|
||
|
struct stdi_readback stdi = { 0 };
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
|
||
|
|
||
|
memset(timings, 0, sizeof(struct v4l2_dv_timings));
|
||
|
|
||
|
/* SDP block */
|
||
|
if (state->mode == ADV7842_MODE_SDP)
|
||
|
return -ENODATA;
|
||
|
|
||
|
/* read STDI */
|
||
|
if (read_stdi(sd, &stdi)) {
|
||
|
state->restart_stdi_once = true;
|
||
|
v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__);
|
||
|
return -ENOLINK;
|
||
|
}
|
||
|
bt->interlaced = stdi.interlaced ?
|
||
|
V4L2_DV_INTERLACED : V4L2_DV_PROGRESSIVE;
|
||
|
bt->standards = V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT |
|
||
|
V4L2_DV_BT_STD_GTF | V4L2_DV_BT_STD_CVT;
|
||
|
|
||
|
if (is_digital_input(sd)) {
|
||
|
u32 freq;
|
||
|
|
||
|
timings->type = V4L2_DV_BT_656_1120;
|
||
|
|
||
|
bt->width = (hdmi_read(sd, 0x07) & 0x0f) * 256 + hdmi_read(sd, 0x08);
|
||
|
bt->height = (hdmi_read(sd, 0x09) & 0x0f) * 256 + hdmi_read(sd, 0x0a);
|
||
|
freq = ((hdmi_read(sd, 0x51) << 1) + (hdmi_read(sd, 0x52) >> 7)) * 1000000;
|
||
|
freq += ((hdmi_read(sd, 0x52) & 0x7f) * 7813);
|
||
|
if (is_hdmi(sd)) {
|
||
|
/* adjust for deep color mode */
|
||
|
freq = freq * 8 / (((hdmi_read(sd, 0x0b) & 0xc0) >> 6) * 2 + 8);
|
||
|
}
|
||
|
bt->pixelclock = freq;
|
||
|
bt->hfrontporch = (hdmi_read(sd, 0x20) & 0x03) * 256 +
|
||
|
hdmi_read(sd, 0x21);
|
||
|
bt->hsync = (hdmi_read(sd, 0x22) & 0x03) * 256 +
|
||
|
hdmi_read(sd, 0x23);
|
||
|
bt->hbackporch = (hdmi_read(sd, 0x24) & 0x03) * 256 +
|
||
|
hdmi_read(sd, 0x25);
|
||
|
bt->vfrontporch = ((hdmi_read(sd, 0x2a) & 0x1f) * 256 +
|
||
|
hdmi_read(sd, 0x2b)) / 2;
|
||
|
bt->vsync = ((hdmi_read(sd, 0x2e) & 0x1f) * 256 +
|
||
|
hdmi_read(sd, 0x2f)) / 2;
|
||
|
bt->vbackporch = ((hdmi_read(sd, 0x32) & 0x1f) * 256 +
|
||
|
hdmi_read(sd, 0x33)) / 2;
|
||
|
bt->polarities = ((hdmi_read(sd, 0x05) & 0x10) ? V4L2_DV_VSYNC_POS_POL : 0) |
|
||
|
((hdmi_read(sd, 0x05) & 0x20) ? V4L2_DV_HSYNC_POS_POL : 0);
|
||
|
if (bt->interlaced == V4L2_DV_INTERLACED) {
|
||
|
bt->height += (hdmi_read(sd, 0x0b) & 0x0f) * 256 +
|
||
|
hdmi_read(sd, 0x0c);
|
||
|
bt->il_vfrontporch = ((hdmi_read(sd, 0x2c) & 0x1f) * 256 +
|
||
|
hdmi_read(sd, 0x2d)) / 2;
|
||
|
bt->il_vsync = ((hdmi_read(sd, 0x30) & 0x1f) * 256 +
|
||
|
hdmi_read(sd, 0x31)) / 2;
|
||
|
bt->il_vbackporch = ((hdmi_read(sd, 0x34) & 0x1f) * 256 +
|
||
|
hdmi_read(sd, 0x35)) / 2;
|
||
|
} else {
|
||
|
bt->il_vfrontporch = 0;
|
||
|
bt->il_vsync = 0;
|
||
|
bt->il_vbackporch = 0;
|
||
|
}
|
||
|
adv7842_fill_optional_dv_timings_fields(sd, timings);
|
||
|
} else {
|
||
|
/* find format
|
||
|
* Since LCVS values are inaccurate [REF_03, p. 339-340],
|
||
|
* stdi2dv_timings() is called with lcvs +-1 if the first attempt fails.
|
||
|
*/
|
||
|
if (!stdi2dv_timings(sd, &stdi, timings))
|
||
|
goto found;
|
||
|
stdi.lcvs += 1;
|
||
|
v4l2_dbg(1, debug, sd, "%s: lcvs + 1 = %d\n", __func__, stdi.lcvs);
|
||
|
if (!stdi2dv_timings(sd, &stdi, timings))
|
||
|
goto found;
|
||
|
stdi.lcvs -= 2;
|
||
|
v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs);
|
||
|
if (stdi2dv_timings(sd, &stdi, timings)) {
|
||
|
/*
|
||
|
* The STDI block may measure wrong values, especially
|
||
|
* for lcvs and lcf. If the driver can not find any
|
||
|
* valid timing, the STDI block is restarted to measure
|
||
|
* the video timings again. The function will return an
|
||
|
* error, but the restart of STDI will generate a new
|
||
|
* STDI interrupt and the format detection process will
|
||
|
* restart.
|
||
|
*/
|
||
|
if (state->restart_stdi_once) {
|
||
|
v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__);
|
||
|
/* TODO restart STDI for Sync Channel 2 */
|
||
|
/* enter one-shot mode */
|
||
|
cp_write_and_or(sd, 0x86, 0xf9, 0x00);
|
||
|
/* trigger STDI restart */
|
||
|
cp_write_and_or(sd, 0x86, 0xf9, 0x04);
|
||
|
/* reset to continuous mode */
|
||
|
cp_write_and_or(sd, 0x86, 0xf9, 0x02);
|
||
|
state->restart_stdi_once = false;
|
||
|
return -ENOLINK;
|
||
|
}
|
||
|
v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__);
|
||
|
return -ERANGE;
|
||
|
}
|
||
|
state->restart_stdi_once = true;
|
||
|
}
|
||
|
found:
|
||
|
|
||
|
if (debug > 1)
|
||
|
v4l2_print_dv_timings(sd->name, "adv7842_query_dv_timings:",
|
||
|
timings, true);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_s_dv_timings(struct v4l2_subdev *sd,
|
||
|
struct v4l2_dv_timings *timings)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct v4l2_bt_timings *bt;
|
||
|
int err;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
|
||
|
|
||
|
if (state->mode == ADV7842_MODE_SDP)
|
||
|
return -ENODATA;
|
||
|
|
||
|
if (v4l2_match_dv_timings(&state->timings, timings, 0, false)) {
|
||
|
v4l2_dbg(1, debug, sd, "%s: no change\n", __func__);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
bt = &timings->bt;
|
||
|
|
||
|
if (!v4l2_valid_dv_timings(timings, adv7842_get_dv_timings_cap(sd),
|
||
|
adv7842_check_dv_timings, NULL))
|
||
|
return -ERANGE;
|
||
|
|
||
|
adv7842_fill_optional_dv_timings_fields(sd, timings);
|
||
|
|
||
|
state->timings = *timings;
|
||
|
|
||
|
cp_write(sd, 0x91, bt->interlaced ? 0x40 : 0x00);
|
||
|
|
||
|
/* Use prim_mode and vid_std when available */
|
||
|
err = configure_predefined_video_timings(sd, timings);
|
||
|
if (err) {
|
||
|
/* custom settings when the video format
|
||
|
does not have prim_mode/vid_std */
|
||
|
configure_custom_video_timings(sd, bt);
|
||
|
}
|
||
|
|
||
|
set_rgb_quantization_range(sd);
|
||
|
|
||
|
|
||
|
if (debug > 1)
|
||
|
v4l2_print_dv_timings(sd->name, "adv7842_s_dv_timings: ",
|
||
|
timings, true);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_g_dv_timings(struct v4l2_subdev *sd,
|
||
|
struct v4l2_dv_timings *timings)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
if (state->mode == ADV7842_MODE_SDP)
|
||
|
return -ENODATA;
|
||
|
*timings = state->timings;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void enable_input(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
set_rgb_quantization_range(sd);
|
||
|
switch (state->mode) {
|
||
|
case ADV7842_MODE_SDP:
|
||
|
case ADV7842_MODE_COMP:
|
||
|
case ADV7842_MODE_RGB:
|
||
|
io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */
|
||
|
break;
|
||
|
case ADV7842_MODE_HDMI:
|
||
|
hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */
|
||
|
io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */
|
||
|
hdmi_write_and_or(sd, 0x1a, 0xef, 0x00); /* Unmute audio */
|
||
|
break;
|
||
|
default:
|
||
|
v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
|
||
|
__func__, state->mode);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void disable_input(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
hdmi_write_and_or(sd, 0x1a, 0xef, 0x10); /* Mute audio [REF_01, c. 2.2.2] */
|
||
|
msleep(16); /* 512 samples with >= 32 kHz sample rate [REF_03, c. 8.29] */
|
||
|
io_write(sd, 0x15, 0xbe); /* Tristate all outputs from video core */
|
||
|
hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */
|
||
|
}
|
||
|
|
||
|
static void sdp_csc_coeff(struct v4l2_subdev *sd,
|
||
|
const struct adv7842_sdp_csc_coeff *c)
|
||
|
{
|
||
|
/* csc auto/manual */
|
||
|
sdp_io_write_and_or(sd, 0xe0, 0xbf, c->manual ? 0x00 : 0x40);
|
||
|
|
||
|
if (!c->manual)
|
||
|
return;
|
||
|
|
||
|
/* csc scaling */
|
||
|
sdp_io_write_and_or(sd, 0xe0, 0x7f, c->scaling == 2 ? 0x80 : 0x00);
|
||
|
|
||
|
/* A coeff */
|
||
|
sdp_io_write_and_or(sd, 0xe0, 0xe0, c->A1 >> 8);
|
||
|
sdp_io_write(sd, 0xe1, c->A1);
|
||
|
sdp_io_write_and_or(sd, 0xe2, 0xe0, c->A2 >> 8);
|
||
|
sdp_io_write(sd, 0xe3, c->A2);
|
||
|
sdp_io_write_and_or(sd, 0xe4, 0xe0, c->A3 >> 8);
|
||
|
sdp_io_write(sd, 0xe5, c->A3);
|
||
|
|
||
|
/* A scale */
|
||
|
sdp_io_write_and_or(sd, 0xe6, 0x80, c->A4 >> 8);
|
||
|
sdp_io_write(sd, 0xe7, c->A4);
|
||
|
|
||
|
/* B coeff */
|
||
|
sdp_io_write_and_or(sd, 0xe8, 0xe0, c->B1 >> 8);
|
||
|
sdp_io_write(sd, 0xe9, c->B1);
|
||
|
sdp_io_write_and_or(sd, 0xea, 0xe0, c->B2 >> 8);
|
||
|
sdp_io_write(sd, 0xeb, c->B2);
|
||
|
sdp_io_write_and_or(sd, 0xec, 0xe0, c->B3 >> 8);
|
||
|
sdp_io_write(sd, 0xed, c->B3);
|
||
|
|
||
|
/* B scale */
|
||
|
sdp_io_write_and_or(sd, 0xee, 0x80, c->B4 >> 8);
|
||
|
sdp_io_write(sd, 0xef, c->B4);
|
||
|
|
||
|
/* C coeff */
|
||
|
sdp_io_write_and_or(sd, 0xf0, 0xe0, c->C1 >> 8);
|
||
|
sdp_io_write(sd, 0xf1, c->C1);
|
||
|
sdp_io_write_and_or(sd, 0xf2, 0xe0, c->C2 >> 8);
|
||
|
sdp_io_write(sd, 0xf3, c->C2);
|
||
|
sdp_io_write_and_or(sd, 0xf4, 0xe0, c->C3 >> 8);
|
||
|
sdp_io_write(sd, 0xf5, c->C3);
|
||
|
|
||
|
/* C scale */
|
||
|
sdp_io_write_and_or(sd, 0xf6, 0x80, c->C4 >> 8);
|
||
|
sdp_io_write(sd, 0xf7, c->C4);
|
||
|
}
|
||
|
|
||
|
static void select_input(struct v4l2_subdev *sd,
|
||
|
enum adv7842_vid_std_select vid_std_select)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
switch (state->mode) {
|
||
|
case ADV7842_MODE_SDP:
|
||
|
io_write(sd, 0x00, vid_std_select); /* video std: CVBS or YC mode */
|
||
|
io_write(sd, 0x01, 0); /* prim mode */
|
||
|
/* enable embedded syncs for auto graphics mode */
|
||
|
cp_write_and_or(sd, 0x81, 0xef, 0x10);
|
||
|
|
||
|
afe_write(sd, 0x00, 0x00); /* power up ADC */
|
||
|
afe_write(sd, 0xc8, 0x00); /* phase control */
|
||
|
|
||
|
io_write(sd, 0xdd, 0x90); /* Manual 2x output clock */
|
||
|
/* script says register 0xde, which don't exist in manual */
|
||
|
|
||
|
/* Manual analog input muxing mode, CVBS (6.4)*/
|
||
|
afe_write_and_or(sd, 0x02, 0x7f, 0x80);
|
||
|
if (vid_std_select == ADV7842_SDP_VID_STD_CVBS_SD_4x1) {
|
||
|
afe_write(sd, 0x03, 0xa0); /* ADC0 to AIN10 (CVBS), ADC1 N/C*/
|
||
|
afe_write(sd, 0x04, 0x00); /* ADC2 N/C,ADC3 N/C*/
|
||
|
} else {
|
||
|
afe_write(sd, 0x03, 0xa0); /* ADC0 to AIN10 (CVBS), ADC1 N/C*/
|
||
|
afe_write(sd, 0x04, 0xc0); /* ADC2 to AIN12, ADC3 N/C*/
|
||
|
}
|
||
|
afe_write(sd, 0x0c, 0x1f); /* ADI recommend write */
|
||
|
afe_write(sd, 0x12, 0x63); /* ADI recommend write */
|
||
|
|
||
|
sdp_io_write(sd, 0xb2, 0x60); /* Disable AV codes */
|
||
|
sdp_io_write(sd, 0xc8, 0xe3); /* Disable Ancillary data */
|
||
|
|
||
|
/* SDP recommended settings */
|
||
|
sdp_write(sd, 0x00, 0x3F); /* Autodetect PAL NTSC (not SECAM) */
|
||
|
sdp_write(sd, 0x01, 0x00); /* Pedestal Off */
|
||
|
|
||
|
sdp_write(sd, 0x03, 0xE4); /* Manual VCR Gain Luma 0x40B */
|
||
|
sdp_write(sd, 0x04, 0x0B); /* Manual Luma setting */
|
||
|
sdp_write(sd, 0x05, 0xC3); /* Manual Chroma setting 0x3FE */
|
||
|
sdp_write(sd, 0x06, 0xFE); /* Manual Chroma setting */
|
||
|
sdp_write(sd, 0x12, 0x0D); /* Frame TBC,I_P, 3D comb enabled */
|
||
|
sdp_write(sd, 0xA7, 0x00); /* ADI Recommended Write */
|
||
|
sdp_io_write(sd, 0xB0, 0x00); /* Disable H and v blanking */
|
||
|
|
||
|
/* deinterlacer enabled and 3D comb */
|
||
|
sdp_write_and_or(sd, 0x12, 0xf6, 0x09);
|
||
|
|
||
|
break;
|
||
|
|
||
|
case ADV7842_MODE_COMP:
|
||
|
case ADV7842_MODE_RGB:
|
||
|
/* Automatic analog input muxing mode */
|
||
|
afe_write_and_or(sd, 0x02, 0x7f, 0x00);
|
||
|
/* set mode and select free run resolution */
|
||
|
io_write(sd, 0x00, vid_std_select); /* video std */
|
||
|
io_write(sd, 0x01, 0x02); /* prim mode */
|
||
|
cp_write_and_or(sd, 0x81, 0xef, 0x10); /* enable embedded syncs
|
||
|
for auto graphics mode */
|
||
|
|
||
|
afe_write(sd, 0x00, 0x00); /* power up ADC */
|
||
|
afe_write(sd, 0xc8, 0x00); /* phase control */
|
||
|
if (state->mode == ADV7842_MODE_COMP) {
|
||
|
/* force to YCrCb */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x60);
|
||
|
} else {
|
||
|
/* force to RGB */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0x10);
|
||
|
}
|
||
|
|
||
|
/* set ADI recommended settings for digitizer */
|
||
|
/* "ADV7842 Register Settings Recommendations
|
||
|
* (rev. 1.8, November 2010)" p. 9. */
|
||
|
afe_write(sd, 0x0c, 0x1f); /* ADC Range improvement */
|
||
|
afe_write(sd, 0x12, 0x63); /* ADC Range improvement */
|
||
|
|
||
|
/* set to default gain for RGB */
|
||
|
cp_write(sd, 0x73, 0x10);
|
||
|
cp_write(sd, 0x74, 0x04);
|
||
|
cp_write(sd, 0x75, 0x01);
|
||
|
cp_write(sd, 0x76, 0x00);
|
||
|
|
||
|
cp_write(sd, 0x3e, 0x04); /* CP core pre-gain control */
|
||
|
cp_write(sd, 0xc3, 0x39); /* CP coast control. Graphics mode */
|
||
|
cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */
|
||
|
break;
|
||
|
|
||
|
case ADV7842_MODE_HDMI:
|
||
|
/* Automatic analog input muxing mode */
|
||
|
afe_write_and_or(sd, 0x02, 0x7f, 0x00);
|
||
|
/* set mode and select free run resolution */
|
||
|
if (state->hdmi_port_a)
|
||
|
hdmi_write(sd, 0x00, 0x02); /* select port A */
|
||
|
else
|
||
|
hdmi_write(sd, 0x00, 0x03); /* select port B */
|
||
|
io_write(sd, 0x00, vid_std_select); /* video std */
|
||
|
io_write(sd, 0x01, 5); /* prim mode */
|
||
|
cp_write_and_or(sd, 0x81, 0xef, 0x00); /* disable embedded syncs
|
||
|
for auto graphics mode */
|
||
|
|
||
|
/* set ADI recommended settings for HDMI: */
|
||
|
/* "ADV7842 Register Settings Recommendations
|
||
|
* (rev. 1.8, November 2010)" p. 3. */
|
||
|
hdmi_write(sd, 0xc0, 0x00);
|
||
|
hdmi_write(sd, 0x0d, 0x34); /* ADI recommended write */
|
||
|
hdmi_write(sd, 0x3d, 0x10); /* ADI recommended write */
|
||
|
hdmi_write(sd, 0x44, 0x85); /* TMDS PLL optimization */
|
||
|
hdmi_write(sd, 0x46, 0x1f); /* ADI recommended write */
|
||
|
hdmi_write(sd, 0x57, 0xb6); /* TMDS PLL optimization */
|
||
|
hdmi_write(sd, 0x58, 0x03); /* TMDS PLL optimization */
|
||
|
hdmi_write(sd, 0x60, 0x88); /* TMDS PLL optimization */
|
||
|
hdmi_write(sd, 0x61, 0x88); /* TMDS PLL optimization */
|
||
|
hdmi_write(sd, 0x6c, 0x18); /* Disable ISRC clearing bit,
|
||
|
Improve robustness */
|
||
|
hdmi_write(sd, 0x75, 0x10); /* DDC drive strength */
|
||
|
hdmi_write(sd, 0x85, 0x1f); /* equaliser */
|
||
|
hdmi_write(sd, 0x87, 0x70); /* ADI recommended write */
|
||
|
hdmi_write(sd, 0x89, 0x04); /* equaliser */
|
||
|
hdmi_write(sd, 0x8a, 0x1e); /* equaliser */
|
||
|
hdmi_write(sd, 0x93, 0x04); /* equaliser */
|
||
|
hdmi_write(sd, 0x94, 0x1e); /* equaliser */
|
||
|
hdmi_write(sd, 0x99, 0xa1); /* ADI recommended write */
|
||
|
hdmi_write(sd, 0x9b, 0x09); /* ADI recommended write */
|
||
|
hdmi_write(sd, 0x9d, 0x02); /* equaliser */
|
||
|
|
||
|
afe_write(sd, 0x00, 0xff); /* power down ADC */
|
||
|
afe_write(sd, 0xc8, 0x40); /* phase control */
|
||
|
|
||
|
/* set to default gain for HDMI */
|
||
|
cp_write(sd, 0x73, 0x10);
|
||
|
cp_write(sd, 0x74, 0x04);
|
||
|
cp_write(sd, 0x75, 0x01);
|
||
|
cp_write(sd, 0x76, 0x00);
|
||
|
|
||
|
/* reset ADI recommended settings for digitizer */
|
||
|
/* "ADV7842 Register Settings Recommendations
|
||
|
* (rev. 2.5, June 2010)" p. 17. */
|
||
|
afe_write(sd, 0x12, 0xfb); /* ADC noise shaping filter controls */
|
||
|
afe_write(sd, 0x0c, 0x0d); /* CP core gain controls */
|
||
|
cp_write(sd, 0x3e, 0x00); /* CP core pre-gain control */
|
||
|
|
||
|
/* CP coast control */
|
||
|
cp_write(sd, 0xc3, 0x33); /* Component mode */
|
||
|
|
||
|
/* color space conversion, autodetect color space */
|
||
|
io_write_and_or(sd, 0x02, 0x0f, 0xf0);
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n",
|
||
|
__func__, state->mode);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int adv7842_s_routing(struct v4l2_subdev *sd,
|
||
|
u32 input, u32 output, u32 config)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
v4l2_dbg(2, debug, sd, "%s: input %d\n", __func__, input);
|
||
|
|
||
|
switch (input) {
|
||
|
case ADV7842_SELECT_HDMI_PORT_A:
|
||
|
state->mode = ADV7842_MODE_HDMI;
|
||
|
state->vid_std_select = ADV7842_HDMI_COMP_VID_STD_HD_1250P;
|
||
|
state->hdmi_port_a = true;
|
||
|
break;
|
||
|
case ADV7842_SELECT_HDMI_PORT_B:
|
||
|
state->mode = ADV7842_MODE_HDMI;
|
||
|
state->vid_std_select = ADV7842_HDMI_COMP_VID_STD_HD_1250P;
|
||
|
state->hdmi_port_a = false;
|
||
|
break;
|
||
|
case ADV7842_SELECT_VGA_COMP:
|
||
|
state->mode = ADV7842_MODE_COMP;
|
||
|
state->vid_std_select = ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE;
|
||
|
break;
|
||
|
case ADV7842_SELECT_VGA_RGB:
|
||
|
state->mode = ADV7842_MODE_RGB;
|
||
|
state->vid_std_select = ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE;
|
||
|
break;
|
||
|
case ADV7842_SELECT_SDP_CVBS:
|
||
|
state->mode = ADV7842_MODE_SDP;
|
||
|
state->vid_std_select = ADV7842_SDP_VID_STD_CVBS_SD_4x1;
|
||
|
break;
|
||
|
case ADV7842_SELECT_SDP_YC:
|
||
|
state->mode = ADV7842_MODE_SDP;
|
||
|
state->vid_std_select = ADV7842_SDP_VID_STD_YC_SD4_x1;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
disable_input(sd);
|
||
|
select_input(sd, state->vid_std_select);
|
||
|
enable_input(sd);
|
||
|
|
||
|
v4l2_subdev_notify_event(sd, &adv7842_ev_fmt);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_enum_mbus_code(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_mbus_code_enum *code)
|
||
|
{
|
||
|
if (code->index >= ARRAY_SIZE(adv7842_formats))
|
||
|
return -EINVAL;
|
||
|
code->code = adv7842_formats[code->index].code;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void adv7842_fill_format(struct adv7842_state *state,
|
||
|
struct v4l2_mbus_framefmt *format)
|
||
|
{
|
||
|
memset(format, 0, sizeof(*format));
|
||
|
|
||
|
format->width = state->timings.bt.width;
|
||
|
format->height = state->timings.bt.height;
|
||
|
format->field = V4L2_FIELD_NONE;
|
||
|
format->colorspace = V4L2_COLORSPACE_SRGB;
|
||
|
|
||
|
if (state->timings.bt.flags & V4L2_DV_FL_IS_CE_VIDEO)
|
||
|
format->colorspace = (state->timings.bt.height <= 576) ?
|
||
|
V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Compute the op_ch_sel value required to obtain on the bus the component order
|
||
|
* corresponding to the selected format taking into account bus reordering
|
||
|
* applied by the board at the output of the device.
|
||
|
*
|
||
|
* The following table gives the op_ch_value from the format component order
|
||
|
* (expressed as op_ch_sel value in column) and the bus reordering (expressed as
|
||
|
* adv7842_bus_order value in row).
|
||
|
*
|
||
|
* | GBR(0) GRB(1) BGR(2) RGB(3) BRG(4) RBG(5)
|
||
|
* ----------+-------------------------------------------------
|
||
|
* RGB (NOP) | GBR GRB BGR RGB BRG RBG
|
||
|
* GRB (1-2) | BGR RGB GBR GRB RBG BRG
|
||
|
* RBG (2-3) | GRB GBR BRG RBG BGR RGB
|
||
|
* BGR (1-3) | RBG BRG RGB BGR GRB GBR
|
||
|
* BRG (ROR) | BRG RBG GRB GBR RGB BGR
|
||
|
* GBR (ROL) | RGB BGR RBG BRG GBR GRB
|
||
|
*/
|
||
|
static unsigned int adv7842_op_ch_sel(struct adv7842_state *state)
|
||
|
{
|
||
|
#define _SEL(a, b, c, d, e, f) { \
|
||
|
ADV7842_OP_CH_SEL_##a, ADV7842_OP_CH_SEL_##b, ADV7842_OP_CH_SEL_##c, \
|
||
|
ADV7842_OP_CH_SEL_##d, ADV7842_OP_CH_SEL_##e, ADV7842_OP_CH_SEL_##f }
|
||
|
#define _BUS(x) [ADV7842_BUS_ORDER_##x]
|
||
|
|
||
|
static const unsigned int op_ch_sel[6][6] = {
|
||
|
_BUS(RGB) /* NOP */ = _SEL(GBR, GRB, BGR, RGB, BRG, RBG),
|
||
|
_BUS(GRB) /* 1-2 */ = _SEL(BGR, RGB, GBR, GRB, RBG, BRG),
|
||
|
_BUS(RBG) /* 2-3 */ = _SEL(GRB, GBR, BRG, RBG, BGR, RGB),
|
||
|
_BUS(BGR) /* 1-3 */ = _SEL(RBG, BRG, RGB, BGR, GRB, GBR),
|
||
|
_BUS(BRG) /* ROR */ = _SEL(BRG, RBG, GRB, GBR, RGB, BGR),
|
||
|
_BUS(GBR) /* ROL */ = _SEL(RGB, BGR, RBG, BRG, GBR, GRB),
|
||
|
};
|
||
|
|
||
|
return op_ch_sel[state->pdata.bus_order][state->format->op_ch_sel >> 5];
|
||
|
}
|
||
|
|
||
|
static void adv7842_setup_format(struct adv7842_state *state)
|
||
|
{
|
||
|
struct v4l2_subdev *sd = &state->sd;
|
||
|
|
||
|
io_write_clr_set(sd, 0x02, 0x02,
|
||
|
state->format->rgb_out ? ADV7842_RGB_OUT : 0);
|
||
|
io_write(sd, 0x03, state->format->op_format_sel |
|
||
|
state->pdata.op_format_mode_sel);
|
||
|
io_write_clr_set(sd, 0x04, 0xe0, adv7842_op_ch_sel(state));
|
||
|
io_write_clr_set(sd, 0x05, 0x01,
|
||
|
state->format->swap_cb_cr ? ADV7842_OP_SWAP_CB_CR : 0);
|
||
|
set_rgb_quantization_range(sd);
|
||
|
}
|
||
|
|
||
|
static int adv7842_get_format(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_format *format)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
if (format->pad != ADV7842_PAD_SOURCE)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (state->mode == ADV7842_MODE_SDP) {
|
||
|
/* SPD block */
|
||
|
if (!(sdp_read(sd, 0x5a) & 0x01))
|
||
|
return -EINVAL;
|
||
|
format->format.code = MEDIA_BUS_FMT_YUYV8_2X8;
|
||
|
format->format.width = 720;
|
||
|
/* valid signal */
|
||
|
if (state->norm & V4L2_STD_525_60)
|
||
|
format->format.height = 480;
|
||
|
else
|
||
|
format->format.height = 576;
|
||
|
format->format.colorspace = V4L2_COLORSPACE_SMPTE170M;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
adv7842_fill_format(state, &format->format);
|
||
|
|
||
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
||
|
struct v4l2_mbus_framefmt *fmt;
|
||
|
|
||
|
fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
|
||
|
format->format.code = fmt->code;
|
||
|
} else {
|
||
|
format->format.code = state->format->code;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_set_format(struct v4l2_subdev *sd,
|
||
|
struct v4l2_subdev_pad_config *cfg,
|
||
|
struct v4l2_subdev_format *format)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
const struct adv7842_format_info *info;
|
||
|
|
||
|
if (format->pad != ADV7842_PAD_SOURCE)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (state->mode == ADV7842_MODE_SDP)
|
||
|
return adv7842_get_format(sd, cfg, format);
|
||
|
|
||
|
info = adv7842_format_info(state, format->format.code);
|
||
|
if (info == NULL)
|
||
|
info = adv7842_format_info(state, MEDIA_BUS_FMT_YUYV8_2X8);
|
||
|
|
||
|
adv7842_fill_format(state, &format->format);
|
||
|
format->format.code = info->code;
|
||
|
|
||
|
if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
|
||
|
struct v4l2_mbus_framefmt *fmt;
|
||
|
|
||
|
fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
|
||
|
fmt->code = format->format.code;
|
||
|
} else {
|
||
|
state->format = info;
|
||
|
adv7842_setup_format(state);
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void adv7842_irq_enable(struct v4l2_subdev *sd, bool enable)
|
||
|
{
|
||
|
if (enable) {
|
||
|
/* Enable SSPD, STDI and CP locked/unlocked interrupts */
|
||
|
io_write(sd, 0x46, 0x9c);
|
||
|
/* ESDP_50HZ_DET interrupt */
|
||
|
io_write(sd, 0x5a, 0x10);
|
||
|
/* Enable CABLE_DET_A/B_ST (+5v) interrupt */
|
||
|
io_write(sd, 0x73, 0x03);
|
||
|
/* Enable V_LOCKED and DE_REGEN_LCK interrupts */
|
||
|
io_write(sd, 0x78, 0x03);
|
||
|
/* Enable SDP Standard Detection Change and SDP Video Detected */
|
||
|
io_write(sd, 0xa0, 0x09);
|
||
|
/* Enable HDMI_MODE interrupt */
|
||
|
io_write(sd, 0x69, 0x08);
|
||
|
} else {
|
||
|
io_write(sd, 0x46, 0x0);
|
||
|
io_write(sd, 0x5a, 0x0);
|
||
|
io_write(sd, 0x73, 0x0);
|
||
|
io_write(sd, 0x78, 0x0);
|
||
|
io_write(sd, 0xa0, 0x0);
|
||
|
io_write(sd, 0x69, 0x0);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
#if IS_ENABLED(CONFIG_VIDEO_ADV7842_CEC)
|
||
|
static void adv7842_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
if ((cec_read(sd, 0x11) & 0x01) == 0) {
|
||
|
v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
if (tx_raw_status & 0x02) {
|
||
|
v4l2_dbg(1, debug, sd, "%s: tx raw: arbitration lost\n",
|
||
|
__func__);
|
||
|
cec_transmit_done(state->cec_adap, CEC_TX_STATUS_ARB_LOST,
|
||
|
1, 0, 0, 0);
|
||
|
return;
|
||
|
}
|
||
|
if (tx_raw_status & 0x04) {
|
||
|
u8 status;
|
||
|
u8 nack_cnt;
|
||
|
u8 low_drive_cnt;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__);
|
||
|
/*
|
||
|
* We set this status bit since this hardware performs
|
||
|
* retransmissions.
|
||
|
*/
|
||
|
status = CEC_TX_STATUS_MAX_RETRIES;
|
||
|
nack_cnt = cec_read(sd, 0x14) & 0xf;
|
||
|
if (nack_cnt)
|
||
|
status |= CEC_TX_STATUS_NACK;
|
||
|
low_drive_cnt = cec_read(sd, 0x14) >> 4;
|
||
|
if (low_drive_cnt)
|
||
|
status |= CEC_TX_STATUS_LOW_DRIVE;
|
||
|
cec_transmit_done(state->cec_adap, status,
|
||
|
0, nack_cnt, low_drive_cnt, 0);
|
||
|
return;
|
||
|
}
|
||
|
if (tx_raw_status & 0x01) {
|
||
|
v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__);
|
||
|
cec_transmit_done(state->cec_adap, CEC_TX_STATUS_OK, 0, 0, 0, 0);
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void adv7842_cec_isr(struct v4l2_subdev *sd, bool *handled)
|
||
|
{
|
||
|
u8 cec_irq;
|
||
|
|
||
|
/* cec controller */
|
||
|
cec_irq = io_read(sd, 0x93) & 0x0f;
|
||
|
if (!cec_irq)
|
||
|
return;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s: cec: irq 0x%x\n", __func__, cec_irq);
|
||
|
adv7842_cec_tx_raw_status(sd, cec_irq);
|
||
|
if (cec_irq & 0x08) {
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct cec_msg msg;
|
||
|
|
||
|
msg.len = cec_read(sd, 0x25) & 0x1f;
|
||
|
if (msg.len > 16)
|
||
|
msg.len = 16;
|
||
|
|
||
|
if (msg.len) {
|
||
|
u8 i;
|
||
|
|
||
|
for (i = 0; i < msg.len; i++)
|
||
|
msg.msg[i] = cec_read(sd, i + 0x15);
|
||
|
cec_write(sd, 0x26, 0x01); /* re-enable rx */
|
||
|
cec_received_msg(state->cec_adap, &msg);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
io_write(sd, 0x94, cec_irq);
|
||
|
|
||
|
if (handled)
|
||
|
*handled = true;
|
||
|
}
|
||
|
|
||
|
static int adv7842_cec_adap_enable(struct cec_adapter *adap, bool enable)
|
||
|
{
|
||
|
struct adv7842_state *state = cec_get_drvdata(adap);
|
||
|
struct v4l2_subdev *sd = &state->sd;
|
||
|
|
||
|
if (!state->cec_enabled_adap && enable) {
|
||
|
cec_write_clr_set(sd, 0x2a, 0x01, 0x01); /* power up cec */
|
||
|
cec_write(sd, 0x2c, 0x01); /* cec soft reset */
|
||
|
cec_write_clr_set(sd, 0x11, 0x01, 0); /* initially disable tx */
|
||
|
/* enabled irqs: */
|
||
|
/* tx: ready */
|
||
|
/* tx: arbitration lost */
|
||
|
/* tx: retry timeout */
|
||
|
/* rx: ready */
|
||
|
io_write_clr_set(sd, 0x96, 0x0f, 0x0f);
|
||
|
cec_write(sd, 0x26, 0x01); /* enable rx */
|
||
|
} else if (state->cec_enabled_adap && !enable) {
|
||
|
/* disable cec interrupts */
|
||
|
io_write_clr_set(sd, 0x96, 0x0f, 0x00);
|
||
|
/* disable address mask 1-3 */
|
||
|
cec_write_clr_set(sd, 0x27, 0x70, 0x00);
|
||
|
/* power down cec section */
|
||
|
cec_write_clr_set(sd, 0x2a, 0x01, 0x00);
|
||
|
state->cec_valid_addrs = 0;
|
||
|
}
|
||
|
state->cec_enabled_adap = enable;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_cec_adap_log_addr(struct cec_adapter *adap, u8 addr)
|
||
|
{
|
||
|
struct adv7842_state *state = cec_get_drvdata(adap);
|
||
|
struct v4l2_subdev *sd = &state->sd;
|
||
|
unsigned int i, free_idx = ADV7842_MAX_ADDRS;
|
||
|
|
||
|
if (!state->cec_enabled_adap)
|
||
|
return addr == CEC_LOG_ADDR_INVALID ? 0 : -EIO;
|
||
|
|
||
|
if (addr == CEC_LOG_ADDR_INVALID) {
|
||
|
cec_write_clr_set(sd, 0x27, 0x70, 0);
|
||
|
state->cec_valid_addrs = 0;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < ADV7842_MAX_ADDRS; i++) {
|
||
|
bool is_valid = state->cec_valid_addrs & (1 << i);
|
||
|
|
||
|
if (free_idx == ADV7842_MAX_ADDRS && !is_valid)
|
||
|
free_idx = i;
|
||
|
if (is_valid && state->cec_addr[i] == addr)
|
||
|
return 0;
|
||
|
}
|
||
|
if (i == ADV7842_MAX_ADDRS) {
|
||
|
i = free_idx;
|
||
|
if (i == ADV7842_MAX_ADDRS)
|
||
|
return -ENXIO;
|
||
|
}
|
||
|
state->cec_addr[i] = addr;
|
||
|
state->cec_valid_addrs |= 1 << i;
|
||
|
|
||
|
switch (i) {
|
||
|
case 0:
|
||
|
/* enable address mask 0 */
|
||
|
cec_write_clr_set(sd, 0x27, 0x10, 0x10);
|
||
|
/* set address for mask 0 */
|
||
|
cec_write_clr_set(sd, 0x28, 0x0f, addr);
|
||
|
break;
|
||
|
case 1:
|
||
|
/* enable address mask 1 */
|
||
|
cec_write_clr_set(sd, 0x27, 0x20, 0x20);
|
||
|
/* set address for mask 1 */
|
||
|
cec_write_clr_set(sd, 0x28, 0xf0, addr << 4);
|
||
|
break;
|
||
|
case 2:
|
||
|
/* enable address mask 2 */
|
||
|
cec_write_clr_set(sd, 0x27, 0x40, 0x40);
|
||
|
/* set address for mask 1 */
|
||
|
cec_write_clr_set(sd, 0x29, 0x0f, addr);
|
||
|
break;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_cec_adap_transmit(struct cec_adapter *adap, u8 attempts,
|
||
|
u32 signal_free_time, struct cec_msg *msg)
|
||
|
{
|
||
|
struct adv7842_state *state = cec_get_drvdata(adap);
|
||
|
struct v4l2_subdev *sd = &state->sd;
|
||
|
u8 len = msg->len;
|
||
|
unsigned int i;
|
||
|
|
||
|
/*
|
||
|
* The number of retries is the number of attempts - 1, but retry
|
||
|
* at least once. It's not clear if a value of 0 is allowed, so
|
||
|
* let's do at least one retry.
|
||
|
*/
|
||
|
cec_write_clr_set(sd, 0x12, 0x70, max(1, attempts - 1) << 4);
|
||
|
|
||
|
if (len > 16) {
|
||
|
v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/* write data */
|
||
|
for (i = 0; i < len; i++)
|
||
|
cec_write(sd, i, msg->msg[i]);
|
||
|
|
||
|
/* set length (data + header) */
|
||
|
cec_write(sd, 0x10, len);
|
||
|
/* start transmit, enable tx */
|
||
|
cec_write(sd, 0x11, 0x01);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct cec_adap_ops adv7842_cec_adap_ops = {
|
||
|
.adap_enable = adv7842_cec_adap_enable,
|
||
|
.adap_log_addr = adv7842_cec_adap_log_addr,
|
||
|
.adap_transmit = adv7842_cec_adap_transmit,
|
||
|
};
|
||
|
#endif
|
||
|
|
||
|
static int adv7842_isr(struct v4l2_subdev *sd, u32 status, bool *handled)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
u8 fmt_change_cp, fmt_change_digital, fmt_change_sdp;
|
||
|
u8 irq_status[6];
|
||
|
|
||
|
adv7842_irq_enable(sd, false);
|
||
|
|
||
|
/* read status */
|
||
|
irq_status[0] = io_read(sd, 0x43);
|
||
|
irq_status[1] = io_read(sd, 0x57);
|
||
|
irq_status[2] = io_read(sd, 0x70);
|
||
|
irq_status[3] = io_read(sd, 0x75);
|
||
|
irq_status[4] = io_read(sd, 0x9d);
|
||
|
irq_status[5] = io_read(sd, 0x66);
|
||
|
|
||
|
/* and clear */
|
||
|
if (irq_status[0])
|
||
|
io_write(sd, 0x44, irq_status[0]);
|
||
|
if (irq_status[1])
|
||
|
io_write(sd, 0x58, irq_status[1]);
|
||
|
if (irq_status[2])
|
||
|
io_write(sd, 0x71, irq_status[2]);
|
||
|
if (irq_status[3])
|
||
|
io_write(sd, 0x76, irq_status[3]);
|
||
|
if (irq_status[4])
|
||
|
io_write(sd, 0x9e, irq_status[4]);
|
||
|
if (irq_status[5])
|
||
|
io_write(sd, 0x67, irq_status[5]);
|
||
|
|
||
|
adv7842_irq_enable(sd, true);
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s: irq %x, %x, %x, %x, %x, %x\n", __func__,
|
||
|
irq_status[0], irq_status[1], irq_status[2],
|
||
|
irq_status[3], irq_status[4], irq_status[5]);
|
||
|
|
||
|
/* format change CP */
|
||
|
fmt_change_cp = irq_status[0] & 0x9c;
|
||
|
|
||
|
/* format change SDP */
|
||
|
if (state->mode == ADV7842_MODE_SDP)
|
||
|
fmt_change_sdp = (irq_status[1] & 0x30) | (irq_status[4] & 0x09);
|
||
|
else
|
||
|
fmt_change_sdp = 0;
|
||
|
|
||
|
/* digital format CP */
|
||
|
if (is_digital_input(sd))
|
||
|
fmt_change_digital = irq_status[3] & 0x03;
|
||
|
else
|
||
|
fmt_change_digital = 0;
|
||
|
|
||
|
/* format change */
|
||
|
if (fmt_change_cp || fmt_change_digital || fmt_change_sdp) {
|
||
|
v4l2_dbg(1, debug, sd,
|
||
|
"%s: fmt_change_cp = 0x%x, fmt_change_digital = 0x%x, fmt_change_sdp = 0x%x\n",
|
||
|
__func__, fmt_change_cp, fmt_change_digital,
|
||
|
fmt_change_sdp);
|
||
|
v4l2_subdev_notify_event(sd, &adv7842_ev_fmt);
|
||
|
if (handled)
|
||
|
*handled = true;
|
||
|
}
|
||
|
|
||
|
/* HDMI/DVI mode */
|
||
|
if (irq_status[5] & 0x08) {
|
||
|
v4l2_dbg(1, debug, sd, "%s: irq %s mode\n", __func__,
|
||
|
(io_read(sd, 0x65) & 0x08) ? "HDMI" : "DVI");
|
||
|
set_rgb_quantization_range(sd);
|
||
|
if (handled)
|
||
|
*handled = true;
|
||
|
}
|
||
|
|
||
|
#if IS_ENABLED(CONFIG_VIDEO_ADV7842_CEC)
|
||
|
/* cec */
|
||
|
adv7842_cec_isr(sd, handled);
|
||
|
#endif
|
||
|
|
||
|
/* tx 5v detect */
|
||
|
if (irq_status[2] & 0x3) {
|
||
|
v4l2_dbg(1, debug, sd, "%s: irq tx_5v\n", __func__);
|
||
|
adv7842_s_detect_tx_5v_ctrl(sd);
|
||
|
if (handled)
|
||
|
*handled = true;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
u8 *data = NULL;
|
||
|
|
||
|
memset(edid->reserved, 0, sizeof(edid->reserved));
|
||
|
|
||
|
switch (edid->pad) {
|
||
|
case ADV7842_EDID_PORT_A:
|
||
|
case ADV7842_EDID_PORT_B:
|
||
|
if (state->hdmi_edid.present & (0x04 << edid->pad))
|
||
|
data = state->hdmi_edid.edid;
|
||
|
break;
|
||
|
case ADV7842_EDID_PORT_VGA:
|
||
|
if (state->vga_edid.present)
|
||
|
data = state->vga_edid.edid;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
if (edid->start_block == 0 && edid->blocks == 0) {
|
||
|
edid->blocks = data ? 2 : 0;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
if (!data)
|
||
|
return -ENODATA;
|
||
|
|
||
|
if (edid->start_block >= 2)
|
||
|
return -EINVAL;
|
||
|
|
||
|
if (edid->start_block + edid->blocks > 2)
|
||
|
edid->blocks = 2 - edid->start_block;
|
||
|
|
||
|
memcpy(edid->edid, data + edid->start_block * 128, edid->blocks * 128);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *e)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
int err = 0;
|
||
|
|
||
|
memset(e->reserved, 0, sizeof(e->reserved));
|
||
|
|
||
|
if (e->pad > ADV7842_EDID_PORT_VGA)
|
||
|
return -EINVAL;
|
||
|
if (e->start_block != 0)
|
||
|
return -EINVAL;
|
||
|
if (e->blocks > 2) {
|
||
|
e->blocks = 2;
|
||
|
return -E2BIG;
|
||
|
}
|
||
|
|
||
|
/* todo, per edid */
|
||
|
state->aspect_ratio = v4l2_calc_aspect_ratio(e->edid[0x15],
|
||
|
e->edid[0x16]);
|
||
|
|
||
|
switch (e->pad) {
|
||
|
case ADV7842_EDID_PORT_VGA:
|
||
|
memset(&state->vga_edid.edid, 0, 256);
|
||
|
state->vga_edid.present = e->blocks ? 0x1 : 0x0;
|
||
|
memcpy(&state->vga_edid.edid, e->edid, 128 * e->blocks);
|
||
|
err = edid_write_vga_segment(sd);
|
||
|
break;
|
||
|
case ADV7842_EDID_PORT_A:
|
||
|
case ADV7842_EDID_PORT_B:
|
||
|
memset(&state->hdmi_edid.edid, 0, 256);
|
||
|
if (e->blocks) {
|
||
|
state->hdmi_edid.present |= 0x04 << e->pad;
|
||
|
} else {
|
||
|
state->hdmi_edid.present &= ~(0x04 << e->pad);
|
||
|
adv7842_s_detect_tx_5v_ctrl(sd);
|
||
|
}
|
||
|
memcpy(&state->hdmi_edid.edid, e->edid, 128 * e->blocks);
|
||
|
err = edid_write_hdmi_segment(sd, e->pad);
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
if (err < 0)
|
||
|
v4l2_err(sd, "error %d writing edid on port %d\n", err, e->pad);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
struct adv7842_cfg_read_infoframe {
|
||
|
const char *desc;
|
||
|
u8 present_mask;
|
||
|
u8 head_addr;
|
||
|
u8 payload_addr;
|
||
|
};
|
||
|
|
||
|
static void log_infoframe(struct v4l2_subdev *sd, struct adv7842_cfg_read_infoframe *cri)
|
||
|
{
|
||
|
int i;
|
||
|
u8 buffer[32];
|
||
|
union hdmi_infoframe frame;
|
||
|
u8 len;
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
struct device *dev = &client->dev;
|
||
|
|
||
|
if (!(io_read(sd, 0x60) & cri->present_mask)) {
|
||
|
v4l2_info(sd, "%s infoframe not received\n", cri->desc);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < 3; i++)
|
||
|
buffer[i] = infoframe_read(sd, cri->head_addr + i);
|
||
|
|
||
|
len = buffer[2] + 1;
|
||
|
|
||
|
if (len + 3 > sizeof(buffer)) {
|
||
|
v4l2_err(sd, "%s: invalid %s infoframe length %d\n", __func__, cri->desc, len);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < len; i++)
|
||
|
buffer[i + 3] = infoframe_read(sd, cri->payload_addr + i);
|
||
|
|
||
|
if (hdmi_infoframe_unpack(&frame, buffer) < 0) {
|
||
|
v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
hdmi_infoframe_log(KERN_INFO, dev, &frame);
|
||
|
}
|
||
|
|
||
|
static void adv7842_log_infoframes(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
int i;
|
||
|
struct adv7842_cfg_read_infoframe cri[] = {
|
||
|
{ "AVI", 0x01, 0xe0, 0x00 },
|
||
|
{ "Audio", 0x02, 0xe3, 0x1c },
|
||
|
{ "SDP", 0x04, 0xe6, 0x2a },
|
||
|
{ "Vendor", 0x10, 0xec, 0x54 }
|
||
|
};
|
||
|
|
||
|
if (!(hdmi_read(sd, 0x05) & 0x80)) {
|
||
|
v4l2_info(sd, "receive DVI-D signal, no infoframes\n");
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
for (i = 0; i < ARRAY_SIZE(cri); i++)
|
||
|
log_infoframe(sd, &cri[i]);
|
||
|
}
|
||
|
|
||
|
#if 0
|
||
|
/* Let's keep it here for now, as it could be useful for debug */
|
||
|
static const char * const prim_mode_txt[] = {
|
||
|
"SDP",
|
||
|
"Component",
|
||
|
"Graphics",
|
||
|
"Reserved",
|
||
|
"CVBS & HDMI AUDIO",
|
||
|
"HDMI-Comp",
|
||
|
"HDMI-GR",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
"Reserved",
|
||
|
};
|
||
|
#endif
|
||
|
|
||
|
static int adv7842_sdp_log_status(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
/* SDP (Standard definition processor) block */
|
||
|
u8 sdp_signal_detected = sdp_read(sd, 0x5A) & 0x01;
|
||
|
|
||
|
v4l2_info(sd, "Chip powered %s\n", no_power(sd) ? "off" : "on");
|
||
|
v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n",
|
||
|
io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f);
|
||
|
|
||
|
v4l2_info(sd, "SDP: free run: %s\n",
|
||
|
(sdp_read(sd, 0x56) & 0x01) ? "on" : "off");
|
||
|
v4l2_info(sd, "SDP: %s\n", sdp_signal_detected ?
|
||
|
"valid SD/PR signal detected" : "invalid/no signal");
|
||
|
if (sdp_signal_detected) {
|
||
|
static const char * const sdp_std_txt[] = {
|
||
|
"NTSC-M/J",
|
||
|
"1?",
|
||
|
"NTSC-443",
|
||
|
"60HzSECAM",
|
||
|
"PAL-M",
|
||
|
"5?",
|
||
|
"PAL-60",
|
||
|
"7?", "8?", "9?", "a?", "b?",
|
||
|
"PAL-CombN",
|
||
|
"d?",
|
||
|
"PAL-BGHID",
|
||
|
"SECAM"
|
||
|
};
|
||
|
v4l2_info(sd, "SDP: standard %s\n",
|
||
|
sdp_std_txt[sdp_read(sd, 0x52) & 0x0f]);
|
||
|
v4l2_info(sd, "SDP: %s\n",
|
||
|
(sdp_read(sd, 0x59) & 0x08) ? "50Hz" : "60Hz");
|
||
|
v4l2_info(sd, "SDP: %s\n",
|
||
|
(sdp_read(sd, 0x57) & 0x08) ? "Interlaced" : "Progressive");
|
||
|
v4l2_info(sd, "SDP: deinterlacer %s\n",
|
||
|
(sdp_read(sd, 0x12) & 0x08) ? "enabled" : "disabled");
|
||
|
v4l2_info(sd, "SDP: csc %s mode\n",
|
||
|
(sdp_io_read(sd, 0xe0) & 0x40) ? "auto" : "manual");
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_cp_log_status(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
/* CP block */
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct v4l2_dv_timings timings;
|
||
|
u8 reg_io_0x02 = io_read(sd, 0x02);
|
||
|
u8 reg_io_0x21 = io_read(sd, 0x21);
|
||
|
u8 reg_rep_0x77 = rep_read(sd, 0x77);
|
||
|
u8 reg_rep_0x7d = rep_read(sd, 0x7d);
|
||
|
bool audio_pll_locked = hdmi_read(sd, 0x04) & 0x01;
|
||
|
bool audio_sample_packet_detect = hdmi_read(sd, 0x18) & 0x01;
|
||
|
bool audio_mute = io_read(sd, 0x65) & 0x40;
|
||
|
|
||
|
static const char * const csc_coeff_sel_rb[16] = {
|
||
|
"bypassed", "YPbPr601 -> RGB", "reserved", "YPbPr709 -> RGB",
|
||
|
"reserved", "RGB -> YPbPr601", "reserved", "RGB -> YPbPr709",
|
||
|
"reserved", "YPbPr709 -> YPbPr601", "YPbPr601 -> YPbPr709",
|
||
|
"reserved", "reserved", "reserved", "reserved", "manual"
|
||
|
};
|
||
|
static const char * const input_color_space_txt[16] = {
|
||
|
"RGB limited range (16-235)", "RGB full range (0-255)",
|
||
|
"YCbCr Bt.601 (16-235)", "YCbCr Bt.709 (16-235)",
|
||
|
"xvYCC Bt.601", "xvYCC Bt.709",
|
||
|
"YCbCr Bt.601 (0-255)", "YCbCr Bt.709 (0-255)",
|
||
|
"invalid", "invalid", "invalid", "invalid", "invalid",
|
||
|
"invalid", "invalid", "automatic"
|
||
|
};
|
||
|
static const char * const rgb_quantization_range_txt[] = {
|
||
|
"Automatic",
|
||
|
"RGB limited range (16-235)",
|
||
|
"RGB full range (0-255)",
|
||
|
};
|
||
|
static const char * const deep_color_mode_txt[4] = {
|
||
|
"8-bits per channel",
|
||
|
"10-bits per channel",
|
||
|
"12-bits per channel",
|
||
|
"16-bits per channel (not supported)"
|
||
|
};
|
||
|
|
||
|
v4l2_info(sd, "-----Chip status-----\n");
|
||
|
v4l2_info(sd, "Chip power: %s\n", no_power(sd) ? "off" : "on");
|
||
|
v4l2_info(sd, "HDMI/DVI-D port selected: %s\n",
|
||
|
state->hdmi_port_a ? "A" : "B");
|
||
|
v4l2_info(sd, "EDID A %s, B %s\n",
|
||
|
((reg_rep_0x7d & 0x04) && (reg_rep_0x77 & 0x04)) ?
|
||
|
"enabled" : "disabled",
|
||
|
((reg_rep_0x7d & 0x08) && (reg_rep_0x77 & 0x08)) ?
|
||
|
"enabled" : "disabled");
|
||
|
v4l2_info(sd, "HPD A %s, B %s\n",
|
||
|
reg_io_0x21 & 0x02 ? "enabled" : "disabled",
|
||
|
reg_io_0x21 & 0x01 ? "enabled" : "disabled");
|
||
|
v4l2_info(sd, "CEC: %s\n", state->cec_enabled_adap ?
|
||
|
"enabled" : "disabled");
|
||
|
if (state->cec_enabled_adap) {
|
||
|
int i;
|
||
|
|
||
|
for (i = 0; i < ADV7842_MAX_ADDRS; i++) {
|
||
|
bool is_valid = state->cec_valid_addrs & (1 << i);
|
||
|
|
||
|
if (is_valid)
|
||
|
v4l2_info(sd, "CEC Logical Address: 0x%x\n",
|
||
|
state->cec_addr[i]);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
v4l2_info(sd, "-----Signal status-----\n");
|
||
|
if (state->hdmi_port_a) {
|
||
|
v4l2_info(sd, "Cable detected (+5V power): %s\n",
|
||
|
io_read(sd, 0x6f) & 0x02 ? "true" : "false");
|
||
|
v4l2_info(sd, "TMDS signal detected: %s\n",
|
||
|
(io_read(sd, 0x6a) & 0x02) ? "true" : "false");
|
||
|
v4l2_info(sd, "TMDS signal locked: %s\n",
|
||
|
(io_read(sd, 0x6a) & 0x20) ? "true" : "false");
|
||
|
} else {
|
||
|
v4l2_info(sd, "Cable detected (+5V power):%s\n",
|
||
|
io_read(sd, 0x6f) & 0x01 ? "true" : "false");
|
||
|
v4l2_info(sd, "TMDS signal detected: %s\n",
|
||
|
(io_read(sd, 0x6a) & 0x01) ? "true" : "false");
|
||
|
v4l2_info(sd, "TMDS signal locked: %s\n",
|
||
|
(io_read(sd, 0x6a) & 0x10) ? "true" : "false");
|
||
|
}
|
||
|
v4l2_info(sd, "CP free run: %s\n",
|
||
|
(!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off"));
|
||
|
v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n",
|
||
|
io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f,
|
||
|
(io_read(sd, 0x01) & 0x70) >> 4);
|
||
|
|
||
|
v4l2_info(sd, "-----Video Timings-----\n");
|
||
|
if (no_cp_signal(sd)) {
|
||
|
v4l2_info(sd, "STDI: not locked\n");
|
||
|
} else {
|
||
|
u32 bl = ((cp_read(sd, 0xb1) & 0x3f) << 8) | cp_read(sd, 0xb2);
|
||
|
u32 lcf = ((cp_read(sd, 0xb3) & 0x7) << 8) | cp_read(sd, 0xb4);
|
||
|
u32 lcvs = cp_read(sd, 0xb3) >> 3;
|
||
|
u32 fcl = ((cp_read(sd, 0xb8) & 0x1f) << 8) | cp_read(sd, 0xb9);
|
||
|
char hs_pol = ((cp_read(sd, 0xb5) & 0x10) ?
|
||
|
((cp_read(sd, 0xb5) & 0x08) ? '+' : '-') : 'x');
|
||
|
char vs_pol = ((cp_read(sd, 0xb5) & 0x40) ?
|
||
|
((cp_read(sd, 0xb5) & 0x20) ? '+' : '-') : 'x');
|
||
|
v4l2_info(sd,
|
||
|
"STDI: lcf (frame height - 1) = %d, bl = %d, lcvs (vsync) = %d, fcl = %d, %s, %chsync, %cvsync\n",
|
||
|
lcf, bl, lcvs, fcl,
|
||
|
(cp_read(sd, 0xb1) & 0x40) ?
|
||
|
"interlaced" : "progressive",
|
||
|
hs_pol, vs_pol);
|
||
|
}
|
||
|
if (adv7842_query_dv_timings(sd, &timings))
|
||
|
v4l2_info(sd, "No video detected\n");
|
||
|
else
|
||
|
v4l2_print_dv_timings(sd->name, "Detected format: ",
|
||
|
&timings, true);
|
||
|
v4l2_print_dv_timings(sd->name, "Configured format: ",
|
||
|
&state->timings, true);
|
||
|
|
||
|
if (no_cp_signal(sd))
|
||
|
return 0;
|
||
|
|
||
|
v4l2_info(sd, "-----Color space-----\n");
|
||
|
v4l2_info(sd, "RGB quantization range ctrl: %s\n",
|
||
|
rgb_quantization_range_txt[state->rgb_quantization_range]);
|
||
|
v4l2_info(sd, "Input color space: %s\n",
|
||
|
input_color_space_txt[reg_io_0x02 >> 4]);
|
||
|
v4l2_info(sd, "Output color space: %s %s, alt-gamma %s\n",
|
||
|
(reg_io_0x02 & 0x02) ? "RGB" : "YCbCr",
|
||
|
(((reg_io_0x02 >> 2) & 0x01) ^ (reg_io_0x02 & 0x01)) ?
|
||
|
"(16-235)" : "(0-255)",
|
||
|
(reg_io_0x02 & 0x08) ? "enabled" : "disabled");
|
||
|
v4l2_info(sd, "Color space conversion: %s\n",
|
||
|
csc_coeff_sel_rb[cp_read(sd, 0xf4) >> 4]);
|
||
|
|
||
|
if (!is_digital_input(sd))
|
||
|
return 0;
|
||
|
|
||
|
v4l2_info(sd, "-----%s status-----\n", is_hdmi(sd) ? "HDMI" : "DVI-D");
|
||
|
v4l2_info(sd, "HDCP encrypted content: %s\n",
|
||
|
(hdmi_read(sd, 0x05) & 0x40) ? "true" : "false");
|
||
|
v4l2_info(sd, "HDCP keys read: %s%s\n",
|
||
|
(hdmi_read(sd, 0x04) & 0x20) ? "yes" : "no",
|
||
|
(hdmi_read(sd, 0x04) & 0x10) ? "ERROR" : "");
|
||
|
if (!is_hdmi(sd))
|
||
|
return 0;
|
||
|
|
||
|
v4l2_info(sd, "Audio: pll %s, samples %s, %s\n",
|
||
|
audio_pll_locked ? "locked" : "not locked",
|
||
|
audio_sample_packet_detect ? "detected" : "not detected",
|
||
|
audio_mute ? "muted" : "enabled");
|
||
|
if (audio_pll_locked && audio_sample_packet_detect) {
|
||
|
v4l2_info(sd, "Audio format: %s\n",
|
||
|
(hdmi_read(sd, 0x07) & 0x40) ? "multi-channel" : "stereo");
|
||
|
}
|
||
|
v4l2_info(sd, "Audio CTS: %u\n", (hdmi_read(sd, 0x5b) << 12) +
|
||
|
(hdmi_read(sd, 0x5c) << 8) +
|
||
|
(hdmi_read(sd, 0x5d) & 0xf0));
|
||
|
v4l2_info(sd, "Audio N: %u\n", ((hdmi_read(sd, 0x5d) & 0x0f) << 16) +
|
||
|
(hdmi_read(sd, 0x5e) << 8) +
|
||
|
hdmi_read(sd, 0x5f));
|
||
|
v4l2_info(sd, "AV Mute: %s\n",
|
||
|
(hdmi_read(sd, 0x04) & 0x40) ? "on" : "off");
|
||
|
v4l2_info(sd, "Deep color mode: %s\n",
|
||
|
deep_color_mode_txt[hdmi_read(sd, 0x0b) >> 6]);
|
||
|
|
||
|
adv7842_log_infoframes(sd);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_log_status(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
if (state->mode == ADV7842_MODE_SDP)
|
||
|
return adv7842_sdp_log_status(sd);
|
||
|
return adv7842_cp_log_status(sd);
|
||
|
}
|
||
|
|
||
|
static int adv7842_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
|
||
|
|
||
|
if (state->mode != ADV7842_MODE_SDP)
|
||
|
return -ENODATA;
|
||
|
|
||
|
if (!(sdp_read(sd, 0x5A) & 0x01)) {
|
||
|
*std = 0;
|
||
|
v4l2_dbg(1, debug, sd, "%s: no valid signal\n", __func__);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
switch (sdp_read(sd, 0x52) & 0x0f) {
|
||
|
case 0:
|
||
|
/* NTSC-M/J */
|
||
|
*std &= V4L2_STD_NTSC;
|
||
|
break;
|
||
|
case 2:
|
||
|
/* NTSC-443 */
|
||
|
*std &= V4L2_STD_NTSC_443;
|
||
|
break;
|
||
|
case 3:
|
||
|
/* 60HzSECAM */
|
||
|
*std &= V4L2_STD_SECAM;
|
||
|
break;
|
||
|
case 4:
|
||
|
/* PAL-M */
|
||
|
*std &= V4L2_STD_PAL_M;
|
||
|
break;
|
||
|
case 6:
|
||
|
/* PAL-60 */
|
||
|
*std &= V4L2_STD_PAL_60;
|
||
|
break;
|
||
|
case 0xc:
|
||
|
/* PAL-CombN */
|
||
|
*std &= V4L2_STD_PAL_Nc;
|
||
|
break;
|
||
|
case 0xe:
|
||
|
/* PAL-BGHID */
|
||
|
*std &= V4L2_STD_PAL;
|
||
|
break;
|
||
|
case 0xf:
|
||
|
/* SECAM */
|
||
|
*std &= V4L2_STD_SECAM;
|
||
|
break;
|
||
|
default:
|
||
|
*std &= V4L2_STD_ALL;
|
||
|
break;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void adv7842_s_sdp_io(struct v4l2_subdev *sd, struct adv7842_sdp_io_sync_adjustment *s)
|
||
|
{
|
||
|
if (s && s->adjust) {
|
||
|
sdp_io_write(sd, 0x94, (s->hs_beg >> 8) & 0xf);
|
||
|
sdp_io_write(sd, 0x95, s->hs_beg & 0xff);
|
||
|
sdp_io_write(sd, 0x96, (s->hs_width >> 8) & 0xf);
|
||
|
sdp_io_write(sd, 0x97, s->hs_width & 0xff);
|
||
|
sdp_io_write(sd, 0x98, (s->de_beg >> 8) & 0xf);
|
||
|
sdp_io_write(sd, 0x99, s->de_beg & 0xff);
|
||
|
sdp_io_write(sd, 0x9a, (s->de_end >> 8) & 0xf);
|
||
|
sdp_io_write(sd, 0x9b, s->de_end & 0xff);
|
||
|
sdp_io_write(sd, 0xa8, s->vs_beg_o);
|
||
|
sdp_io_write(sd, 0xa9, s->vs_beg_e);
|
||
|
sdp_io_write(sd, 0xaa, s->vs_end_o);
|
||
|
sdp_io_write(sd, 0xab, s->vs_end_e);
|
||
|
sdp_io_write(sd, 0xac, s->de_v_beg_o);
|
||
|
sdp_io_write(sd, 0xad, s->de_v_beg_e);
|
||
|
sdp_io_write(sd, 0xae, s->de_v_end_o);
|
||
|
sdp_io_write(sd, 0xaf, s->de_v_end_e);
|
||
|
} else {
|
||
|
/* set to default */
|
||
|
sdp_io_write(sd, 0x94, 0x00);
|
||
|
sdp_io_write(sd, 0x95, 0x00);
|
||
|
sdp_io_write(sd, 0x96, 0x00);
|
||
|
sdp_io_write(sd, 0x97, 0x20);
|
||
|
sdp_io_write(sd, 0x98, 0x00);
|
||
|
sdp_io_write(sd, 0x99, 0x00);
|
||
|
sdp_io_write(sd, 0x9a, 0x00);
|
||
|
sdp_io_write(sd, 0x9b, 0x00);
|
||
|
sdp_io_write(sd, 0xa8, 0x04);
|
||
|
sdp_io_write(sd, 0xa9, 0x04);
|
||
|
sdp_io_write(sd, 0xaa, 0x04);
|
||
|
sdp_io_write(sd, 0xab, 0x04);
|
||
|
sdp_io_write(sd, 0xac, 0x04);
|
||
|
sdp_io_write(sd, 0xad, 0x04);
|
||
|
sdp_io_write(sd, 0xae, 0x04);
|
||
|
sdp_io_write(sd, 0xaf, 0x04);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int adv7842_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct adv7842_platform_data *pdata = &state->pdata;
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
|
||
|
|
||
|
if (state->mode != ADV7842_MODE_SDP)
|
||
|
return -ENODATA;
|
||
|
|
||
|
if (norm & V4L2_STD_625_50)
|
||
|
adv7842_s_sdp_io(sd, &pdata->sdp_io_sync_625);
|
||
|
else if (norm & V4L2_STD_525_60)
|
||
|
adv7842_s_sdp_io(sd, &pdata->sdp_io_sync_525);
|
||
|
else
|
||
|
adv7842_s_sdp_io(sd, NULL);
|
||
|
|
||
|
if (norm & V4L2_STD_ALL) {
|
||
|
state->norm = norm;
|
||
|
return 0;
|
||
|
}
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
static int adv7842_g_std(struct v4l2_subdev *sd, v4l2_std_id *norm)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
v4l2_dbg(1, debug, sd, "%s:\n", __func__);
|
||
|
|
||
|
if (state->mode != ADV7842_MODE_SDP)
|
||
|
return -ENODATA;
|
||
|
|
||
|
*norm = state->norm;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static int adv7842_core_init(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct adv7842_platform_data *pdata = &state->pdata;
|
||
|
hdmi_write(sd, 0x48,
|
||
|
(pdata->disable_pwrdnb ? 0x80 : 0) |
|
||
|
(pdata->disable_cable_det_rst ? 0x40 : 0));
|
||
|
|
||
|
disable_input(sd);
|
||
|
|
||
|
/*
|
||
|
* Disable I2C access to internal EDID ram from HDMI DDC ports
|
||
|
* Disable auto edid enable when leaving powerdown mode
|
||
|
*/
|
||
|
rep_write_and_or(sd, 0x77, 0xd3, 0x20);
|
||
|
|
||
|
/* power */
|
||
|
io_write(sd, 0x0c, 0x42); /* Power up part and power down VDP */
|
||
|
io_write(sd, 0x15, 0x80); /* Power up pads */
|
||
|
|
||
|
/* video format */
|
||
|
io_write(sd, 0x02, 0xf0 | pdata->alt_gamma << 3);
|
||
|
io_write_and_or(sd, 0x05, 0xf0, pdata->blank_data << 3 |
|
||
|
pdata->insert_av_codes << 2 |
|
||
|
pdata->replicate_av_codes << 1);
|
||
|
adv7842_setup_format(state);
|
||
|
|
||
|
/* HDMI audio */
|
||
|
hdmi_write_and_or(sd, 0x1a, 0xf1, 0x08); /* Wait 1 s before unmute */
|
||
|
|
||
|
/* Drive strength */
|
||
|
io_write_and_or(sd, 0x14, 0xc0,
|
||
|
pdata->dr_str_data << 4 |
|
||
|
pdata->dr_str_clk << 2 |
|
||
|
pdata->dr_str_sync);
|
||
|
|
||
|
/* HDMI free run */
|
||
|
cp_write_and_or(sd, 0xba, 0xfc, pdata->hdmi_free_run_enable |
|
||
|
(pdata->hdmi_free_run_mode << 1));
|
||
|
|
||
|
/* SPD free run */
|
||
|
sdp_write_and_or(sd, 0xdd, 0xf0, pdata->sdp_free_run_force |
|
||
|
(pdata->sdp_free_run_cbar_en << 1) |
|
||
|
(pdata->sdp_free_run_man_col_en << 2) |
|
||
|
(pdata->sdp_free_run_auto << 3));
|
||
|
|
||
|
/* TODO from platform data */
|
||
|
cp_write(sd, 0x69, 0x14); /* Enable CP CSC */
|
||
|
io_write(sd, 0x06, 0xa6); /* positive VS and HS and DE */
|
||
|
cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */
|
||
|
afe_write(sd, 0xb5, 0x01); /* Setting MCLK to 256Fs */
|
||
|
|
||
|
afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */
|
||
|
io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4);
|
||
|
|
||
|
sdp_csc_coeff(sd, &pdata->sdp_csc_coeff);
|
||
|
|
||
|
/* todo, improve settings for sdram */
|
||
|
if (pdata->sd_ram_size >= 128) {
|
||
|
sdp_write(sd, 0x12, 0x0d); /* Frame TBC,3D comb enabled */
|
||
|
if (pdata->sd_ram_ddr) {
|
||
|
/* SDP setup for the AD eval board */
|
||
|
sdp_io_write(sd, 0x6f, 0x00); /* DDR mode */
|
||
|
sdp_io_write(sd, 0x75, 0x0a); /* 128 MB memory size */
|
||
|
sdp_io_write(sd, 0x7a, 0xa5); /* Timing Adjustment */
|
||
|
sdp_io_write(sd, 0x7b, 0x8f); /* Timing Adjustment */
|
||
|
sdp_io_write(sd, 0x60, 0x01); /* SDRAM reset */
|
||
|
} else {
|
||
|
sdp_io_write(sd, 0x75, 0x0a); /* 64 MB memory size ?*/
|
||
|
sdp_io_write(sd, 0x74, 0x00); /* must be zero for sdr sdram */
|
||
|
sdp_io_write(sd, 0x79, 0x33); /* CAS latency to 3,
|
||
|
depends on memory */
|
||
|
sdp_io_write(sd, 0x6f, 0x01); /* SDR mode */
|
||
|
sdp_io_write(sd, 0x7a, 0xa5); /* Timing Adjustment */
|
||
|
sdp_io_write(sd, 0x7b, 0x8f); /* Timing Adjustment */
|
||
|
sdp_io_write(sd, 0x60, 0x01); /* SDRAM reset */
|
||
|
}
|
||
|
} else {
|
||
|
/*
|
||
|
* Manual UG-214, rev 0 is bit confusing on this bit
|
||
|
* but a '1' disables any signal if the Ram is active.
|
||
|
*/
|
||
|
sdp_io_write(sd, 0x29, 0x10); /* Tristate memory interface */
|
||
|
}
|
||
|
|
||
|
select_input(sd, pdata->vid_std_select);
|
||
|
|
||
|
enable_input(sd);
|
||
|
|
||
|
if (pdata->hpa_auto) {
|
||
|
/* HPA auto, HPA 0.5s after Edid set and Cable detect */
|
||
|
hdmi_write(sd, 0x69, 0x5c);
|
||
|
} else {
|
||
|
/* HPA manual */
|
||
|
hdmi_write(sd, 0x69, 0xa3);
|
||
|
/* HPA disable on port A and B */
|
||
|
io_write_and_or(sd, 0x20, 0xcf, 0x00);
|
||
|
}
|
||
|
|
||
|
/* LLC */
|
||
|
io_write(sd, 0x19, 0x80 | pdata->llc_dll_phase);
|
||
|
io_write(sd, 0x33, 0x40);
|
||
|
|
||
|
/* interrupts */
|
||
|
io_write(sd, 0x40, 0xf2); /* Configure INT1 */
|
||
|
|
||
|
adv7842_irq_enable(sd, true);
|
||
|
|
||
|
return v4l2_ctrl_handler_setup(sd->ctrl_handler);
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static int adv7842_ddr_ram_test(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
/*
|
||
|
* From ADV784x external Memory test.pdf
|
||
|
*
|
||
|
* Reset must just been performed before running test.
|
||
|
* Recommended to reset after test.
|
||
|
*/
|
||
|
int i;
|
||
|
int pass = 0;
|
||
|
int fail = 0;
|
||
|
int complete = 0;
|
||
|
|
||
|
io_write(sd, 0x00, 0x01); /* Program SDP 4x1 */
|
||
|
io_write(sd, 0x01, 0x00); /* Program SDP mode */
|
||
|
afe_write(sd, 0x80, 0x92); /* SDP Recommeneded Write */
|
||
|
afe_write(sd, 0x9B, 0x01); /* SDP Recommeneded Write ADV7844ES1 */
|
||
|
afe_write(sd, 0x9C, 0x60); /* SDP Recommeneded Write ADV7844ES1 */
|
||
|
afe_write(sd, 0x9E, 0x02); /* SDP Recommeneded Write ADV7844ES1 */
|
||
|
afe_write(sd, 0xA0, 0x0B); /* SDP Recommeneded Write ADV7844ES1 */
|
||
|
afe_write(sd, 0xC3, 0x02); /* Memory BIST Initialisation */
|
||
|
io_write(sd, 0x0C, 0x40); /* Power up ADV7844 */
|
||
|
io_write(sd, 0x15, 0xBA); /* Enable outputs */
|
||
|
sdp_write(sd, 0x12, 0x00); /* Disable 3D comb, Frame TBC & 3DNR */
|
||
|
io_write(sd, 0xFF, 0x04); /* Reset memory controller */
|
||
|
|
||
|
usleep_range(5000, 6000);
|
||
|
|
||
|
sdp_write(sd, 0x12, 0x00); /* Disable 3D Comb, Frame TBC & 3DNR */
|
||
|
sdp_io_write(sd, 0x2A, 0x01); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x7c, 0x19); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x80, 0x87); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x81, 0x4a); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x82, 0x2c); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x83, 0x0e); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x84, 0x94); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x85, 0x62); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x7d, 0x00); /* Memory BIST Initialisation */
|
||
|
sdp_io_write(sd, 0x7e, 0x1a); /* Memory BIST Initialisation */
|
||
|
|
||
|
usleep_range(5000, 6000);
|
||
|
|
||
|
sdp_io_write(sd, 0xd9, 0xd5); /* Enable BIST Test */
|
||
|
sdp_write(sd, 0x12, 0x05); /* Enable FRAME TBC & 3D COMB */
|
||
|
|
||
|
msleep(20);
|
||
|
|
||
|
for (i = 0; i < 10; i++) {
|
||
|
u8 result = sdp_io_read(sd, 0xdb);
|
||
|
if (result & 0x10) {
|
||
|
complete++;
|
||
|
if (result & 0x20)
|
||
|
fail++;
|
||
|
else
|
||
|
pass++;
|
||
|
}
|
||
|
msleep(20);
|
||
|
}
|
||
|
|
||
|
v4l2_dbg(1, debug, sd,
|
||
|
"Ram Test: completed %d of %d: pass %d, fail %d\n",
|
||
|
complete, i, pass, fail);
|
||
|
|
||
|
if (!complete || fail)
|
||
|
return -EIO;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void adv7842_rewrite_i2c_addresses(struct v4l2_subdev *sd,
|
||
|
struct adv7842_platform_data *pdata)
|
||
|
{
|
||
|
io_write(sd, 0xf1, pdata->i2c_sdp << 1);
|
||
|
io_write(sd, 0xf2, pdata->i2c_sdp_io << 1);
|
||
|
io_write(sd, 0xf3, pdata->i2c_avlink << 1);
|
||
|
io_write(sd, 0xf4, pdata->i2c_cec << 1);
|
||
|
io_write(sd, 0xf5, pdata->i2c_infoframe << 1);
|
||
|
|
||
|
io_write(sd, 0xf8, pdata->i2c_afe << 1);
|
||
|
io_write(sd, 0xf9, pdata->i2c_repeater << 1);
|
||
|
io_write(sd, 0xfa, pdata->i2c_edid << 1);
|
||
|
io_write(sd, 0xfb, pdata->i2c_hdmi << 1);
|
||
|
|
||
|
io_write(sd, 0xfd, pdata->i2c_cp << 1);
|
||
|
io_write(sd, 0xfe, pdata->i2c_vdp << 1);
|
||
|
}
|
||
|
|
||
|
static int adv7842_command_ram_test(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct adv7842_platform_data *pdata = client->dev.platform_data;
|
||
|
struct v4l2_dv_timings timings;
|
||
|
int ret = 0;
|
||
|
|
||
|
if (!pdata)
|
||
|
return -ENODEV;
|
||
|
|
||
|
if (!pdata->sd_ram_size || !pdata->sd_ram_ddr) {
|
||
|
v4l2_info(sd, "no sdram or no ddr sdram\n");
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
main_reset(sd);
|
||
|
|
||
|
adv7842_rewrite_i2c_addresses(sd, pdata);
|
||
|
|
||
|
/* run ram test */
|
||
|
ret = adv7842_ddr_ram_test(sd);
|
||
|
|
||
|
main_reset(sd);
|
||
|
|
||
|
adv7842_rewrite_i2c_addresses(sd, pdata);
|
||
|
|
||
|
/* and re-init chip and state */
|
||
|
adv7842_core_init(sd);
|
||
|
|
||
|
disable_input(sd);
|
||
|
|
||
|
select_input(sd, state->vid_std_select);
|
||
|
|
||
|
enable_input(sd);
|
||
|
|
||
|
edid_write_vga_segment(sd);
|
||
|
edid_write_hdmi_segment(sd, ADV7842_EDID_PORT_A);
|
||
|
edid_write_hdmi_segment(sd, ADV7842_EDID_PORT_B);
|
||
|
|
||
|
timings = state->timings;
|
||
|
|
||
|
memset(&state->timings, 0, sizeof(struct v4l2_dv_timings));
|
||
|
|
||
|
adv7842_s_dv_timings(sd, &timings);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static long adv7842_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
|
||
|
{
|
||
|
switch (cmd) {
|
||
|
case ADV7842_CMD_RAM_TEST:
|
||
|
return adv7842_command_ram_test(sd);
|
||
|
}
|
||
|
return -ENOTTY;
|
||
|
}
|
||
|
|
||
|
static int adv7842_subscribe_event(struct v4l2_subdev *sd,
|
||
|
struct v4l2_fh *fh,
|
||
|
struct v4l2_event_subscription *sub)
|
||
|
{
|
||
|
switch (sub->type) {
|
||
|
case V4L2_EVENT_SOURCE_CHANGE:
|
||
|
return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);
|
||
|
case V4L2_EVENT_CTRL:
|
||
|
return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int adv7842_registered(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
int err;
|
||
|
|
||
|
err = cec_register_adapter(state->cec_adap, &client->dev);
|
||
|
if (err)
|
||
|
cec_delete_adapter(state->cec_adap);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
static void adv7842_unregistered(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
cec_unregister_adapter(state->cec_adap);
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static const struct v4l2_ctrl_ops adv7842_ctrl_ops = {
|
||
|
.s_ctrl = adv7842_s_ctrl,
|
||
|
.g_volatile_ctrl = adv7842_g_volatile_ctrl,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_core_ops adv7842_core_ops = {
|
||
|
.log_status = adv7842_log_status,
|
||
|
.ioctl = adv7842_ioctl,
|
||
|
.interrupt_service_routine = adv7842_isr,
|
||
|
.subscribe_event = adv7842_subscribe_event,
|
||
|
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
|
||
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
||
|
.g_register = adv7842_g_register,
|
||
|
.s_register = adv7842_s_register,
|
||
|
#endif
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_video_ops adv7842_video_ops = {
|
||
|
.g_std = adv7842_g_std,
|
||
|
.s_std = adv7842_s_std,
|
||
|
.s_routing = adv7842_s_routing,
|
||
|
.querystd = adv7842_querystd,
|
||
|
.g_input_status = adv7842_g_input_status,
|
||
|
.s_dv_timings = adv7842_s_dv_timings,
|
||
|
.g_dv_timings = adv7842_g_dv_timings,
|
||
|
.query_dv_timings = adv7842_query_dv_timings,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_pad_ops adv7842_pad_ops = {
|
||
|
.enum_mbus_code = adv7842_enum_mbus_code,
|
||
|
.get_fmt = adv7842_get_format,
|
||
|
.set_fmt = adv7842_set_format,
|
||
|
.get_edid = adv7842_get_edid,
|
||
|
.set_edid = adv7842_set_edid,
|
||
|
.enum_dv_timings = adv7842_enum_dv_timings,
|
||
|
.dv_timings_cap = adv7842_dv_timings_cap,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_ops adv7842_ops = {
|
||
|
.core = &adv7842_core_ops,
|
||
|
.video = &adv7842_video_ops,
|
||
|
.pad = &adv7842_pad_ops,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_subdev_internal_ops adv7842_int_ops = {
|
||
|
.registered = adv7842_registered,
|
||
|
.unregistered = adv7842_unregistered,
|
||
|
};
|
||
|
|
||
|
/* -------------------------- custom ctrls ---------------------------------- */
|
||
|
|
||
|
static const struct v4l2_ctrl_config adv7842_ctrl_analog_sampling_phase = {
|
||
|
.ops = &adv7842_ctrl_ops,
|
||
|
.id = V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE,
|
||
|
.name = "Analog Sampling Phase",
|
||
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
||
|
.min = 0,
|
||
|
.max = 0x1f,
|
||
|
.step = 1,
|
||
|
.def = 0,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_ctrl_config adv7842_ctrl_free_run_color_manual = {
|
||
|
.ops = &adv7842_ctrl_ops,
|
||
|
.id = V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL,
|
||
|
.name = "Free Running Color, Manual",
|
||
|
.type = V4L2_CTRL_TYPE_BOOLEAN,
|
||
|
.max = 1,
|
||
|
.step = 1,
|
||
|
.def = 1,
|
||
|
};
|
||
|
|
||
|
static const struct v4l2_ctrl_config adv7842_ctrl_free_run_color = {
|
||
|
.ops = &adv7842_ctrl_ops,
|
||
|
.id = V4L2_CID_ADV_RX_FREE_RUN_COLOR,
|
||
|
.name = "Free Running Color",
|
||
|
.type = V4L2_CTRL_TYPE_INTEGER,
|
||
|
.max = 0xffffff,
|
||
|
.step = 0x1,
|
||
|
};
|
||
|
|
||
|
|
||
|
static void adv7842_unregister_clients(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
if (state->i2c_avlink)
|
||
|
i2c_unregister_device(state->i2c_avlink);
|
||
|
if (state->i2c_cec)
|
||
|
i2c_unregister_device(state->i2c_cec);
|
||
|
if (state->i2c_infoframe)
|
||
|
i2c_unregister_device(state->i2c_infoframe);
|
||
|
if (state->i2c_sdp_io)
|
||
|
i2c_unregister_device(state->i2c_sdp_io);
|
||
|
if (state->i2c_sdp)
|
||
|
i2c_unregister_device(state->i2c_sdp);
|
||
|
if (state->i2c_afe)
|
||
|
i2c_unregister_device(state->i2c_afe);
|
||
|
if (state->i2c_repeater)
|
||
|
i2c_unregister_device(state->i2c_repeater);
|
||
|
if (state->i2c_edid)
|
||
|
i2c_unregister_device(state->i2c_edid);
|
||
|
if (state->i2c_hdmi)
|
||
|
i2c_unregister_device(state->i2c_hdmi);
|
||
|
if (state->i2c_cp)
|
||
|
i2c_unregister_device(state->i2c_cp);
|
||
|
if (state->i2c_vdp)
|
||
|
i2c_unregister_device(state->i2c_vdp);
|
||
|
|
||
|
state->i2c_avlink = NULL;
|
||
|
state->i2c_cec = NULL;
|
||
|
state->i2c_infoframe = NULL;
|
||
|
state->i2c_sdp_io = NULL;
|
||
|
state->i2c_sdp = NULL;
|
||
|
state->i2c_afe = NULL;
|
||
|
state->i2c_repeater = NULL;
|
||
|
state->i2c_edid = NULL;
|
||
|
state->i2c_hdmi = NULL;
|
||
|
state->i2c_cp = NULL;
|
||
|
state->i2c_vdp = NULL;
|
||
|
}
|
||
|
|
||
|
static struct i2c_client *adv7842_dummy_client(struct v4l2_subdev *sd, const char *desc,
|
||
|
u8 addr, u8 io_reg)
|
||
|
{
|
||
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||
|
struct i2c_client *cp;
|
||
|
|
||
|
io_write(sd, io_reg, addr << 1);
|
||
|
|
||
|
if (addr == 0) {
|
||
|
v4l2_err(sd, "no %s i2c addr configured\n", desc);
|
||
|
return NULL;
|
||
|
}
|
||
|
|
||
|
cp = i2c_new_dummy(client->adapter, io_read(sd, io_reg) >> 1);
|
||
|
if (!cp)
|
||
|
v4l2_err(sd, "register %s on i2c addr 0x%x failed\n", desc, addr);
|
||
|
|
||
|
return cp;
|
||
|
}
|
||
|
|
||
|
static int adv7842_register_clients(struct v4l2_subdev *sd)
|
||
|
{
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
struct adv7842_platform_data *pdata = &state->pdata;
|
||
|
|
||
|
state->i2c_avlink = adv7842_dummy_client(sd, "avlink", pdata->i2c_avlink, 0xf3);
|
||
|
state->i2c_cec = adv7842_dummy_client(sd, "cec", pdata->i2c_cec, 0xf4);
|
||
|
state->i2c_infoframe = adv7842_dummy_client(sd, "infoframe", pdata->i2c_infoframe, 0xf5);
|
||
|
state->i2c_sdp_io = adv7842_dummy_client(sd, "sdp_io", pdata->i2c_sdp_io, 0xf2);
|
||
|
state->i2c_sdp = adv7842_dummy_client(sd, "sdp", pdata->i2c_sdp, 0xf1);
|
||
|
state->i2c_afe = adv7842_dummy_client(sd, "afe", pdata->i2c_afe, 0xf8);
|
||
|
state->i2c_repeater = adv7842_dummy_client(sd, "repeater", pdata->i2c_repeater, 0xf9);
|
||
|
state->i2c_edid = adv7842_dummy_client(sd, "edid", pdata->i2c_edid, 0xfa);
|
||
|
state->i2c_hdmi = adv7842_dummy_client(sd, "hdmi", pdata->i2c_hdmi, 0xfb);
|
||
|
state->i2c_cp = adv7842_dummy_client(sd, "cp", pdata->i2c_cp, 0xfd);
|
||
|
state->i2c_vdp = adv7842_dummy_client(sd, "vdp", pdata->i2c_vdp, 0xfe);
|
||
|
|
||
|
if (!state->i2c_avlink ||
|
||
|
!state->i2c_cec ||
|
||
|
!state->i2c_infoframe ||
|
||
|
!state->i2c_sdp_io ||
|
||
|
!state->i2c_sdp ||
|
||
|
!state->i2c_afe ||
|
||
|
!state->i2c_repeater ||
|
||
|
!state->i2c_edid ||
|
||
|
!state->i2c_hdmi ||
|
||
|
!state->i2c_cp ||
|
||
|
!state->i2c_vdp)
|
||
|
return -1;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int adv7842_probe(struct i2c_client *client,
|
||
|
const struct i2c_device_id *id)
|
||
|
{
|
||
|
struct adv7842_state *state;
|
||
|
static const struct v4l2_dv_timings cea640x480 =
|
||
|
V4L2_DV_BT_CEA_640X480P59_94;
|
||
|
struct adv7842_platform_data *pdata = client->dev.platform_data;
|
||
|
struct v4l2_ctrl_handler *hdl;
|
||
|
struct v4l2_ctrl *ctrl;
|
||
|
struct v4l2_subdev *sd;
|
||
|
u16 rev;
|
||
|
int err;
|
||
|
|
||
|
/* Check if the adapter supports the needed features */
|
||
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
||
|
return -EIO;
|
||
|
|
||
|
v4l_dbg(1, debug, client, "detecting adv7842 client on address 0x%x\n",
|
||
|
client->addr << 1);
|
||
|
|
||
|
if (!pdata) {
|
||
|
v4l_err(client, "No platform data!\n");
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
|
||
|
if (!state)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
/* platform data */
|
||
|
state->pdata = *pdata;
|
||
|
state->timings = cea640x480;
|
||
|
state->format = adv7842_format_info(state, MEDIA_BUS_FMT_YUYV8_2X8);
|
||
|
|
||
|
sd = &state->sd;
|
||
|
v4l2_i2c_subdev_init(sd, client, &adv7842_ops);
|
||
|
sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
|
||
|
sd->internal_ops = &adv7842_int_ops;
|
||
|
state->mode = pdata->mode;
|
||
|
|
||
|
state->hdmi_port_a = pdata->input == ADV7842_SELECT_HDMI_PORT_A;
|
||
|
state->restart_stdi_once = true;
|
||
|
|
||
|
/* i2c access to adv7842? */
|
||
|
rev = adv_smbus_read_byte_data_check(client, 0xea, false) << 8 |
|
||
|
adv_smbus_read_byte_data_check(client, 0xeb, false);
|
||
|
if (rev != 0x2012) {
|
||
|
v4l2_info(sd, "got rev=0x%04x on first read attempt\n", rev);
|
||
|
rev = adv_smbus_read_byte_data_check(client, 0xea, false) << 8 |
|
||
|
adv_smbus_read_byte_data_check(client, 0xeb, false);
|
||
|
}
|
||
|
if (rev != 0x2012) {
|
||
|
v4l2_info(sd, "not an adv7842 on address 0x%x (rev=0x%04x)\n",
|
||
|
client->addr << 1, rev);
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
|
||
|
if (pdata->chip_reset)
|
||
|
main_reset(sd);
|
||
|
|
||
|
/* control handlers */
|
||
|
hdl = &state->hdl;
|
||
|
v4l2_ctrl_handler_init(hdl, 6);
|
||
|
|
||
|
/* add in ascending ID order */
|
||
|
v4l2_ctrl_new_std(hdl, &adv7842_ctrl_ops,
|
||
|
V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
|
||
|
v4l2_ctrl_new_std(hdl, &adv7842_ctrl_ops,
|
||
|
V4L2_CID_CONTRAST, 0, 255, 1, 128);
|
||
|
v4l2_ctrl_new_std(hdl, &adv7842_ctrl_ops,
|
||
|
V4L2_CID_SATURATION, 0, 255, 1, 128);
|
||
|
v4l2_ctrl_new_std(hdl, &adv7842_ctrl_ops,
|
||
|
V4L2_CID_HUE, 0, 128, 1, 0);
|
||
|
ctrl = v4l2_ctrl_new_std_menu(hdl, &adv7842_ctrl_ops,
|
||
|
V4L2_CID_DV_RX_IT_CONTENT_TYPE, V4L2_DV_IT_CONTENT_TYPE_NO_ITC,
|
||
|
0, V4L2_DV_IT_CONTENT_TYPE_NO_ITC);
|
||
|
if (ctrl)
|
||
|
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
|
||
|
|
||
|
/* custom controls */
|
||
|
state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL,
|
||
|
V4L2_CID_DV_RX_POWER_PRESENT, 0, 3, 0, 0);
|
||
|
state->analog_sampling_phase_ctrl = v4l2_ctrl_new_custom(hdl,
|
||
|
&adv7842_ctrl_analog_sampling_phase, NULL);
|
||
|
state->free_run_color_ctrl_manual = v4l2_ctrl_new_custom(hdl,
|
||
|
&adv7842_ctrl_free_run_color_manual, NULL);
|
||
|
state->free_run_color_ctrl = v4l2_ctrl_new_custom(hdl,
|
||
|
&adv7842_ctrl_free_run_color, NULL);
|
||
|
state->rgb_quantization_range_ctrl =
|
||
|
v4l2_ctrl_new_std_menu(hdl, &adv7842_ctrl_ops,
|
||
|
V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL,
|
||
|
0, V4L2_DV_RGB_RANGE_AUTO);
|
||
|
sd->ctrl_handler = hdl;
|
||
|
if (hdl->error) {
|
||
|
err = hdl->error;
|
||
|
goto err_hdl;
|
||
|
}
|
||
|
if (adv7842_s_detect_tx_5v_ctrl(sd)) {
|
||
|
err = -ENODEV;
|
||
|
goto err_hdl;
|
||
|
}
|
||
|
|
||
|
if (adv7842_register_clients(sd) < 0) {
|
||
|
err = -ENOMEM;
|
||
|
v4l2_err(sd, "failed to create all i2c clients\n");
|
||
|
goto err_i2c;
|
||
|
}
|
||
|
|
||
|
|
||
|
INIT_DELAYED_WORK(&state->delayed_work_enable_hotplug,
|
||
|
adv7842_delayed_work_enable_hotplug);
|
||
|
|
||
|
sd->entity.function = MEDIA_ENT_F_DV_DECODER;
|
||
|
state->pad.flags = MEDIA_PAD_FL_SOURCE;
|
||
|
err = media_entity_pads_init(&sd->entity, 1, &state->pad);
|
||
|
if (err)
|
||
|
goto err_work_queues;
|
||
|
|
||
|
err = adv7842_core_init(sd);
|
||
|
if (err)
|
||
|
goto err_entity;
|
||
|
|
||
|
#if IS_ENABLED(CONFIG_VIDEO_ADV7842_CEC)
|
||
|
state->cec_adap = cec_allocate_adapter(&adv7842_cec_adap_ops,
|
||
|
state, dev_name(&client->dev),
|
||
|
CEC_CAP_DEFAULTS, ADV7842_MAX_ADDRS);
|
||
|
err = PTR_ERR_OR_ZERO(state->cec_adap);
|
||
|
if (err)
|
||
|
goto err_entity;
|
||
|
#endif
|
||
|
|
||
|
v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
|
||
|
client->addr << 1, client->adapter->name);
|
||
|
return 0;
|
||
|
|
||
|
err_entity:
|
||
|
media_entity_cleanup(&sd->entity);
|
||
|
err_work_queues:
|
||
|
cancel_delayed_work(&state->delayed_work_enable_hotplug);
|
||
|
err_i2c:
|
||
|
adv7842_unregister_clients(sd);
|
||
|
err_hdl:
|
||
|
v4l2_ctrl_handler_free(hdl);
|
||
|
return err;
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static int adv7842_remove(struct i2c_client *client)
|
||
|
{
|
||
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
||
|
struct adv7842_state *state = to_state(sd);
|
||
|
|
||
|
adv7842_irq_enable(sd, false);
|
||
|
cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
|
||
|
v4l2_device_unregister_subdev(sd);
|
||
|
media_entity_cleanup(&sd->entity);
|
||
|
adv7842_unregister_clients(sd);
|
||
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static const struct i2c_device_id adv7842_id[] = {
|
||
|
{ "adv7842", 0 },
|
||
|
{ }
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(i2c, adv7842_id);
|
||
|
|
||
|
/* ----------------------------------------------------------------------- */
|
||
|
|
||
|
static struct i2c_driver adv7842_driver = {
|
||
|
.driver = {
|
||
|
.name = "adv7842",
|
||
|
},
|
||
|
.probe = adv7842_probe,
|
||
|
.remove = adv7842_remove,
|
||
|
.id_table = adv7842_id,
|
||
|
};
|
||
|
|
||
|
module_i2c_driver(adv7842_driver);
|