50 lines
1.8 KiB
Plaintext
50 lines
1.8 KiB
Plaintext
|
* Renesas USB DMA Controller Device Tree bindings
|
||
|
|
|
||
|
|
Required Properties:
|
||
|
|
-compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
|
||
|
|
Examples with soctypes are:
|
||
|
|
- "renesas,r8a7743-usb-dmac" (RZ/G1M)
|
||
|
|
- "renesas,r8a7745-usb-dmac" (RZ/G1E)
|
||
|
|
- "renesas,r8a7790-usb-dmac" (R-Car H2)
|
||
|
|
- "renesas,r8a7791-usb-dmac" (R-Car M2-W)
|
||
|
|
- "renesas,r8a7793-usb-dmac" (R-Car M2-N)
|
||
|
|
- "renesas,r8a7794-usb-dmac" (R-Car E2)
|
||
|
|
- "renesas,r8a7795-usb-dmac" (R-Car H3)
|
||
|
|
- "renesas,r8a7796-usb-dmac" (R-Car M3-W)
|
||
|
|
- "renesas,r8a77965-usb-dmac" (R-Car M3-N)
|
||
|
|
- "renesas,r8a77990-usb-dmac" (R-Car E3)
|
||
|
|
- "renesas,r8a77995-usb-dmac" (R-Car D3)
|
||
|
|
- reg: base address and length of the registers block for the DMAC
|
||
|
|
- interrupts: interrupt specifiers for the DMAC, one for each entry in
|
||
|
|
interrupt-names.
|
||
|
|
- interrupt-names: one entry per channel, named "ch%u", where %u is the
|
||
|
|
channel number ranging from zero to the number of channels minus one.
|
||
|
|
- clocks: a list of phandle + clock-specifier pairs.
|
||
|
|
- #dma-cells: must be <1>, the cell specifies the channel number of the DMAC
|
||
|
|
port connected to the DMA client.
|
||
|
|
- dma-channels: number of DMA channels
|
||
|
|
|
||
|
|
Example: R8A7790 (R-Car H2) USB-DMACs
|
||
|
|
|
||
|
|
usb_dmac0: dma-controller@e65a0000 {
|
||
|
|
compatible = "renesas,r8a7790-usb-dmac", "renesas,usb-dmac";
|
||
|
|
reg = <0 0xe65a0000 0 0x100>;
|
||
|
|
interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH
|
||
|
|
0 109 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "ch0", "ch1";
|
||
|
|
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC0>;
|
||
|
|
#dma-cells = <1>;
|
||
|
|
dma-channels = <2>;
|
||
|
|
};
|
||
|
|
|
||
|
|
usb_dmac1: dma-controller@e65b0000 {
|
||
|
|
compatible = "renesas,usb-dmac";
|
||
|
|
reg = <0 0xe65b0000 0 0x100>;
|
||
|
|
interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH
|
||
|
|
0 110 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
interrupt-names = "ch0", "ch1";
|
||
|
|
clocks = <&mstp3_clks R8A7790_CLK_USBDMAC1>;
|
||
|
|
#dma-cells = <1>;
|
||
|
|
dma-channels = <2>;
|
||
|
|
};
|