47 lines
1.4 KiB
Plaintext
47 lines
1.4 KiB
Plaintext
|
* Aptina MT9V111 CMOS sensor
|
||
|
|
----------------------------
|
||
|
|
|
||
|
|
The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
|
||
|
|
based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
|
||
|
|
|
||
|
|
The sensor has an active pixel array of 640x480 pixels and can output a number
|
||
|
|
of image resolution and formats controllable through a simple two-wires
|
||
|
|
interface.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
--------------------
|
||
|
|
|
||
|
|
- compatible: shall be "aptina,mt9v111".
|
||
|
|
- clocks: reference to the system clock input provider.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
--------------------
|
||
|
|
|
||
|
|
- enable-gpios: output enable signal, pin name "OE#". Active low.
|
||
|
|
- standby-gpios: low power state control signal, pin name "STANDBY".
|
||
|
|
Active high.
|
||
|
|
- reset-gpios: chip reset signal, pin name "RESET#". Active low.
|
||
|
|
|
||
|
|
The device node must contain one 'port' child node with one 'endpoint' child
|
||
|
|
sub-node for its digital output video port, in accordance with the video
|
||
|
|
interface bindings defined in:
|
||
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt
|
||
|
|
|
||
|
|
Example:
|
||
|
|
--------
|
||
|
|
|
||
|
|
&i2c1 {
|
||
|
|
camera@48 {
|
||
|
|
compatible = "aptina,mt9v111";
|
||
|
|
reg = <0x48>;
|
||
|
|
|
||
|
|
clocks = <&camera_clk>;
|
||
|
|
|
||
|
|
port {
|
||
|
|
mt9v111_out: endpoint {
|
||
|
|
remote-endpoint = <&ceu_in>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|