44 lines
1.1 KiB
Plaintext
44 lines
1.1 KiB
Plaintext
|
TI LP87565 PMIC MFD driver
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: "ti,lp87565", "ti,lp87565-q1"
|
||
|
|
- reg: I2C slave address.
|
||
|
|
- gpio-controller: Marks the device node as a GPIO Controller.
|
||
|
|
- #gpio-cells: Should be two. The first cell is the pin number and
|
||
|
|
the second cell is used to specify flags.
|
||
|
|
See ../gpio/gpio.txt for more information.
|
||
|
|
- xxx-in-supply: Phandle to parent supply node of each regulator
|
||
|
|
populated under regulators node. xxx should match
|
||
|
|
the supply_name populated in driver.
|
||
|
|
Example:
|
||
|
|
|
||
|
|
lp87565_pmic: pmic@60 {
|
||
|
|
compatible = "ti,lp87565-q1";
|
||
|
|
reg = <0x60>;
|
||
|
|
gpio-controller;
|
||
|
|
#gpio-cells = <2>;
|
||
|
|
|
||
|
|
buck10-in-supply = <&vsys_3v3>;
|
||
|
|
buck23-in-supply = <&vsys_3v3>;
|
||
|
|
|
||
|
|
regulators: regulators {
|
||
|
|
buck10_reg: buck10 {
|
||
|
|
/* VDD_MPU */
|
||
|
|
regulator-name = "buck10";
|
||
|
|
regulator-min-microvolt = <850000>;
|
||
|
|
regulator-max-microvolt = <1250000>;
|
||
|
|
regulator-always-on;
|
||
|
|
regulator-boot-on;
|
||
|
|
};
|
||
|
|
|
||
|
|
buck23_reg: buck23 {
|
||
|
|
/* VDD_GPU */
|
||
|
|
regulator-name = "buck23";
|
||
|
|
regulator-min-microvolt = <850000>;
|
||
|
|
regulator-max-microvolt = <1250000>;
|
||
|
|
regulator-boot-on;
|
||
|
|
regulator-always-on;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|