69 lines
2.8 KiB
Plaintext
69 lines
2.8 KiB
Plaintext
|
Renesas R-Car CAN controller Device Tree Bindings
|
||
|
|
-------------------------------------------------
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: "renesas,can-r8a7743" if CAN controller is a part of R8A7743 SoC.
|
||
|
|
"renesas,can-r8a7745" if CAN controller is a part of R8A7745 SoC.
|
||
|
|
"renesas,can-r8a7778" if CAN controller is a part of R8A7778 SoC.
|
||
|
|
"renesas,can-r8a7779" if CAN controller is a part of R8A7779 SoC.
|
||
|
|
"renesas,can-r8a7790" if CAN controller is a part of R8A7790 SoC.
|
||
|
|
"renesas,can-r8a7791" if CAN controller is a part of R8A7791 SoC.
|
||
|
|
"renesas,can-r8a7792" if CAN controller is a part of R8A7792 SoC.
|
||
|
|
"renesas,can-r8a7793" if CAN controller is a part of R8A7793 SoC.
|
||
|
|
"renesas,can-r8a7794" if CAN controller is a part of R8A7794 SoC.
|
||
|
|
"renesas,can-r8a7795" if CAN controller is a part of R8A7795 SoC.
|
||
|
|
"renesas,can-r8a7796" if CAN controller is a part of R8A7796 SoC.
|
||
|
|
"renesas,rcar-gen1-can" for a generic R-Car Gen1 compatible device.
|
||
|
|
"renesas,rcar-gen2-can" for a generic R-Car Gen2 or RZ/G1
|
||
|
|
compatible device.
|
||
|
|
"renesas,rcar-gen3-can" for a generic R-Car Gen3 compatible device.
|
||
|
|
When compatible with the generic version, nodes must list the
|
||
|
|
SoC-specific version corresponding to the platform first
|
||
|
|
followed by the generic version.
|
||
|
|
|
||
|
|
- reg: physical base address and size of the R-Car CAN register map.
|
||
|
|
- interrupts: interrupt specifier for the sole interrupt.
|
||
|
|
- clocks: phandles and clock specifiers for 3 CAN clock inputs.
|
||
|
|
- clock-names: 3 clock input name strings: "clkp1", "clkp2", "can_clk".
|
||
|
|
- pinctrl-0: pin control group to be used for this controller.
|
||
|
|
- pinctrl-names: must be "default".
|
||
|
|
|
||
|
|
Required properties for "renesas,can-r8a7795" and "renesas,can-r8a7796"
|
||
|
|
compatible:
|
||
|
|
In R8A7795 and R8A7796 SoCs, "clkp2" can be CANFD clock. This is a div6 clock
|
||
|
|
and can be used by both CAN and CAN FD controller at the same time. It needs to
|
||
|
|
be scaled to maximum frequency if any of these controllers use it. This is done
|
||
|
|
using the below properties:
|
||
|
|
|
||
|
|
- assigned-clocks: phandle of clkp2(CANFD) clock.
|
||
|
|
- assigned-clock-rates: maximum frequency of this clock.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- renesas,can-clock-select: R-Car CAN Clock Source Select. Valid values are:
|
||
|
|
<0x0> (default) : Peripheral clock (clkp1)
|
||
|
|
<0x1> : Peripheral clock (clkp2)
|
||
|
|
<0x3> : Externally input clock
|
||
|
|
|
||
|
|
Example
|
||
|
|
-------
|
||
|
|
|
||
|
|
SoC common .dtsi file:
|
||
|
|
|
||
|
|
can0: can@e6e80000 {
|
||
|
|
compatible = "renesas,can-r8a7791", "renesas,rcar-gen2-can";
|
||
|
|
reg = <0 0xe6e80000 0 0x1000>;
|
||
|
|
interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
|
||
|
|
clocks = <&mstp9_clks R8A7791_CLK_RCAN0>,
|
||
|
|
<&cpg_clocks R8A7791_CLK_RCAN>, <&can_clk>;
|
||
|
|
clock-names = "clkp1", "clkp2", "can_clk";
|
||
|
|
status = "disabled";
|
||
|
|
};
|
||
|
|
|
||
|
|
Board specific .dts file:
|
||
|
|
|
||
|
|
&can0 {
|
||
|
|
pinctrl-0 = <&can0_pins>;
|
||
|
|
pinctrl-names = "default";
|
||
|
|
status = "okay";
|
||
|
|
};
|