41 lines
1.3 KiB
Plaintext
41 lines
1.3 KiB
Plaintext
|
Motorola CPCAP PMIC USB PHY binding
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
compatible: Shall be either "motorola,cpcap-usb-phy" or
|
||
|
|
"motorola,mapphone-cpcap-usb-phy"
|
||
|
|
#phy-cells: Shall be 0
|
||
|
|
interrupts: CPCAP PMIC interrupts used by the USB PHY
|
||
|
|
interrupt-names: Interrupt names
|
||
|
|
io-channels: IIO ADC channels used by the USB PHY
|
||
|
|
io-channel-names: IIO ADC channel names
|
||
|
|
vusb-supply: Regulator for the PHY
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
pinctrl: Optional alternate pin modes for the PHY
|
||
|
|
pinctrl-names: Names for optional pin modes
|
||
|
|
mode-gpios: Optional GPIOs for configuring alternate modes
|
||
|
|
|
||
|
|
Example:
|
||
|
|
cpcap_usb2_phy: phy {
|
||
|
|
compatible = "motorola,mapphone-cpcap-usb-phy";
|
||
|
|
pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
|
||
|
|
pinctrl-1 = <&usb_ulpi_pins>;
|
||
|
|
pinctrl-2 = <&usb_utmi_pins>;
|
||
|
|
pinctrl-3 = <&uart3_pins>;
|
||
|
|
pinctrl-names = "default", "ulpi", "utmi", "uart";
|
||
|
|
#phy-cells = <0>;
|
||
|
|
interrupts-extended = <
|
||
|
|
&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
|
||
|
|
&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
|
||
|
|
&cpcap 48 1
|
||
|
|
>;
|
||
|
|
interrupt-names =
|
||
|
|
"id_ground", "id_float", "se0conn", "vbusvld",
|
||
|
|
"sessvld", "sessend", "se1", "dm", "dp";
|
||
|
|
mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
|
||
|
|
&gpio1 0 GPIO_ACTIVE_HIGH>;
|
||
|
|
io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
|
||
|
|
io-channel-names = "vbus", "id";
|
||
|
|
vusb-supply = <&vusb>;
|
||
|
|
};
|