kernel_samsung_a34x-permissive/arch/arc/include/asm/entry.h

302 lines
6.7 KiB
C
Raw Normal View History

/*
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARC_ENTRY_H
#define __ASM_ARC_ENTRY_H
#include <asm/unistd.h> /* For NR_syscalls defination */
#include <asm/arcregs.h>
#include <asm/ptrace.h>
#include <asm/processor.h> /* For VMALLOC_START */
#include <asm/mmu.h>
#ifdef CONFIG_ISA_ARCOMPACT
#include <asm/entry-compact.h> /* ISA specific bits */
#else
#include <asm/entry-arcv2.h>
#endif
/* Note on the LD/ST addr modes with addr reg wback
*
* LD.a same as LD.aw
*
* LD.a reg1, [reg2, x] => Pre Incr
* Eff Addr for load = [reg2 + x]
*
* LD.ab reg1, [reg2, x] => Post Incr
* Eff Addr for load = [reg2]
*/
.macro PUSH reg
st.a \reg, [sp, -4]
.endm
.macro PUSHAX aux
lr r9, [\aux]
PUSH r9
.endm
.macro POP reg
ld.ab \reg, [sp, 4]
.endm
.macro POPAX aux
POP r9
sr r9, [\aux]
.endm
/*--------------------------------------------------------------
* Helpers to save/restore Scratch Regs:
* used by Interrupt/Exception Prologue/Epilogue
*-------------------------------------------------------------*/
.macro SAVE_R0_TO_R12
PUSH r0
PUSH r1
PUSH r2
PUSH r3
PUSH r4
PUSH r5
PUSH r6
PUSH r7
PUSH r8
PUSH r9
PUSH r10
PUSH r11
PUSH r12
.endm
.macro RESTORE_R12_TO_R0
POP r12
POP r11
POP r10
POP r9
POP r8
POP r7
POP r6
POP r5
POP r4
POP r3
POP r2
POP r1
POP r0
.endm
/*--------------------------------------------------------------
* Helpers to save/restore callee-saved regs:
* used by several macros below
*-------------------------------------------------------------*/
.macro SAVE_R13_TO_R24
PUSH r13
PUSH r14
PUSH r15
PUSH r16
PUSH r17
PUSH r18
PUSH r19
PUSH r20
PUSH r21
PUSH r22
PUSH r23
PUSH r24
.endm
.macro RESTORE_R24_TO_R13
POP r24
POP r23
POP r22
POP r21
POP r20
POP r19
POP r18
POP r17
POP r16
POP r15
POP r14
POP r13
.endm
/*--------------------------------------------------------------
* Collect User Mode callee regs as struct callee_regs - needed by
* fork/do_signal/unaligned-access-emulation.
* (By default only scratch regs are saved on entry to kernel)
*
* Special handling for r25 if used for caching Task Pointer.
* It would have been saved in task->thread.user_r25 already, but to keep
* the interface same it is copied into regular r25 placeholder in
* struct callee_regs.
*-------------------------------------------------------------*/
.macro SAVE_CALLEE_SAVED_USER
mov r12, sp ; save SP as ref to pt_regs
SAVE_R13_TO_R24
#ifdef CONFIG_ARC_CURR_IN_REG
; Retrieve orig r25 and save it with rest of callee_regs
ld r12, [r12, PT_user_r25]
PUSH r12
#else
PUSH r25
#endif
.endm
/*--------------------------------------------------------------
* Save kernel Mode callee regs at the time of Contect Switch.
*
* Special handling for r25 if used for caching Task Pointer.
* Kernel simply skips saving it since it will be loaded with
* incoming task pointer anyways
*-------------------------------------------------------------*/
.macro SAVE_CALLEE_SAVED_KERNEL
SAVE_R13_TO_R24
#ifdef CONFIG_ARC_CURR_IN_REG
sub sp, sp, 4
#else
PUSH r25
#endif
.endm
/*--------------------------------------------------------------
* Opposite of SAVE_CALLEE_SAVED_KERNEL
*-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_KERNEL
#ifdef CONFIG_ARC_CURR_IN_REG
add sp, sp, 4 /* skip usual r25 placeholder */
#else
POP r25
#endif
RESTORE_R24_TO_R13
.endm
/*--------------------------------------------------------------
* Opposite of SAVE_CALLEE_SAVED_USER
*
* ptrace tracer or unaligned-access fixup might have changed a user mode
* callee reg which is saved back to usual r25 storage location
*-------------------------------------------------------------*/
.macro RESTORE_CALLEE_SAVED_USER
#ifdef CONFIG_ARC_CURR_IN_REG
POP r12
#else
POP r25
#endif
RESTORE_R24_TO_R13
; SP is back to start of pt_regs
#ifdef CONFIG_ARC_CURR_IN_REG
st r12, [sp, PT_user_r25]
#endif
.endm
/*--------------------------------------------------------------
* Super FAST Restore callee saved regs by simply re-adjusting SP
*-------------------------------------------------------------*/
.macro DISCARD_CALLEE_SAVED_USER
add sp, sp, SZ_CALLEE_REGS
.endm
/*-------------------------------------------------------------
* given a tsk struct, get to the base of it's kernel mode stack
* tsk->thread_info is really a PAGE, whose bottom hoists stack
* which grows upwards towards thread_info
*------------------------------------------------------------*/
.macro GET_TSK_STACK_BASE tsk, out
/* Get task->thread_info (this is essentially start of a PAGE) */
ld \out, [\tsk, TASK_THREAD_INFO]
/* Go to end of page where stack begins (grows upwards) */
add2 \out, \out, (THREAD_SIZE)/4
.endm
/*
* @reg [OUT] thread_info->flags of "current"
*/
.macro GET_CURR_THR_INFO_FLAGS reg
GET_CURR_THR_INFO_FROM_SP \reg
ld \reg, [\reg, THREAD_INFO_FLAGS]
.endm
#ifdef CONFIG_SMP
/*-------------------------------------------------
* Retrieve the current running task on this CPU
* 1. Determine curr CPU id.
* 2. Use it to index into _current_task[ ]
*/
.macro GET_CURR_TASK_ON_CPU reg
GET_CPU_ID \reg
ld.as \reg, [@_current_task, \reg]
.endm
/*-------------------------------------------------
* Save a new task as the "current" task on this CPU
* 1. Determine curr CPU id.
* 2. Use it to index into _current_task[ ]
*
* Coded differently than GET_CURR_TASK_ON_CPU (which uses LD.AS)
* because ST r0, [r1, offset] can ONLY have s9 @offset
* while LD can take s9 (4 byte insn) or LIMM (8 byte insn)
*/
.macro SET_CURR_TASK_ON_CPU tsk, tmp
GET_CPU_ID \tmp
add2 \tmp, @_current_task, \tmp
st \tsk, [\tmp]
#ifdef CONFIG_ARC_CURR_IN_REG
mov r25, \tsk
#endif
.endm
#else /* Uniprocessor implementation of macros */
.macro GET_CURR_TASK_ON_CPU reg
ld \reg, [@_current_task]
.endm
.macro SET_CURR_TASK_ON_CPU tsk, tmp
st \tsk, [@_current_task]
#ifdef CONFIG_ARC_CURR_IN_REG
mov r25, \tsk
#endif
.endm
#endif /* SMP / UNI */
/* ------------------------------------------------------------------
* Get the ptr to some field of Current Task at @off in task struct
* -Uses r25 for Current task ptr if that is enabled
*/
#ifdef CONFIG_ARC_CURR_IN_REG
.macro GET_CURR_TASK_FIELD_PTR off, reg
add \reg, r25, \off
.endm
#else
.macro GET_CURR_TASK_FIELD_PTR off, reg
GET_CURR_TASK_ON_CPU \reg
add \reg, \reg, \off
.endm
#endif /* CONFIG_ARC_CURR_IN_REG */
#endif /* __ASM_ARC_ENTRY_H */