kernel_samsung_a34x-permissive/arch/arm/boot/dts/imx27-apf27.dts

119 lines
2.3 KiB
Plaintext
Raw Normal View History

/*
* Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
* Copyright 2012 Armadeus Systems <support@armadeus.com>
*
* Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx27.dtsi"
/ {
model = "Armadeus Systems APF27 module";
compatible = "armadeus,imx27-apf27", "fsl,imx27";
memory@a0000000 {
device_type = "memory";
reg = <0xa0000000 0x04000000>;
};
};
&clk_osc26m {
clock-frequency = <0>;
};
&iomuxc {
imx27-apf27 {
pinctrl_fec1: fec1grp {
fsl,pins = <
MX27_PAD_SD3_CMD__FEC_TXD0 0x0
MX27_PAD_SD3_CLK__FEC_TXD1 0x0
MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
MX27_PAD_ATA_DATA7__FEC_MDC 0x0
MX27_PAD_ATA_DATA8__FEC_CRS 0x0
MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
MX27_PAD_ATA_DATA13__FEC_COL 0x0
MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX27_PAD_UART1_TXD__UART1_TXD 0x0
MX27_PAD_UART1_RXD__UART1_RXD 0x0
>;
};
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&nfc {
status = "okay";
nand-bus-width = <16>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
};
partition@100000 {
label = "env";
reg = <0x100000 0x80000>;
};
partition@180000 {
label = "env2";
reg = <0x180000 0x80000>;
};
partition@200000 {
label = "firmware";
reg = <0x200000 0x80000>;
};
partition@280000 {
label = "dtb";
reg = <0x280000 0x80000>;
};
partition@300000 {
label = "kernel";
reg = <0x300000 0x500000>;
};
partition@800000 {
label = "rootfs";
reg = <0x800000 0xf800000>;
};
};