kernel_samsung_a34x-permissive/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi

159 lines
2.8 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "ZyXEL NSA310";
ocp@f1000000 {
pinctrl: pin-controller@10000 {
pmx_usb_power: pmx-usb-power {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_pwr_off: pmx-pwr-off {
marvell,pins = "mpp48";
marvell,function = "gpio";
};
pmx_btn_reset: pmx-btn-reset {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_btn_copy: pmx-btn-copy {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_btn_power: pmx-btn-power {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_copy_green: pmx-led-copy-green {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_led_copy_red: pmx-led-copy-red {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio_poweroff {
compatible = "gpio-poweroff";
pinctrl-0 = <&pmx_pwr_off>;
pinctrl-names = "default";
gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
pinctrl-names = "default";
power {
label = "Power Button";
linux,code = <KEY_POWER>;
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
copy {
label = "Copy Button";
linux,code = <KEY_COPY>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
reset {
label = "Reset Button";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power>;
pinctrl-names = "default";
usb0_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
};
};
};
&nand {
status = "okay";
chip-delay = <35>;
partition@0 {
label = "uboot";
reg = <0x0000000 0x0100000>;
read-only;
};
partition@100000 {
label = "uboot_env";
reg = <0x0100000 0x0080000>;
};
partition@180000 {
label = "key_store";
reg = <0x0180000 0x0080000>;
};
partition@200000 {
label = "info";
reg = <0x0200000 0x0080000>;
};
partition@280000 {
label = "etc";
reg = <0x0280000 0x0a00000>;
};
partition@c80000 {
label = "kernel_1";
reg = <0x0c80000 0x0a00000>;
};
partition@1680000 {
label = "rootfs1";
reg = <0x1680000 0x2fc0000>;
};
partition@4640000 {
label = "kernel_2";
reg = <0x4640000 0x0a00000>;
};
partition@5040000 {
label = "rootfs2";
reg = <0x5040000 0x2fc0000>;
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};