kernel_samsung_a34x-permissive/drivers/gpu/drm/mediatek/mtk_panel_ext.h

387 lines
10 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2019 MediaTek Inc.
*/
#ifndef __MTK_PANEL_EXT_H__
#define __MTK_PANEL_EXT_H__
#include <drm/drm_panel.h>
#define RT_MAX_NUM 10
#define ESD_CHECK_NUM 3
#if defined(CONFIG_SMCDSD_PANEL)
#define MAX_TX_CMD_NUM 30
#else
#define MAX_TX_CMD_NUM 20
#endif
#define MAX_RX_CMD_NUM 20
#define READ_DDIC_SLOT_NUM (4 * MAX_RX_CMD_NUM)
#define MAX_DYN_CMD_NUM 20
struct mtk_dsi;
struct cmdq_pkt;
struct mtk_panel_para_table {
u8 count;
u8 para_list[510];
};
/*
* DSI data type:
* DSI_DCS_WRITE_SHORT_PACKET_NO_PARAM 0x05
* DSI_DCS_WRITE_SHORT_PACKET_1_PARAM 0x15
* DSI_DCS_WRITE_LONG_PACKET 0x39
* DSI_DCS_READ_NO_PARAM 0x06
* DSI_GERNERIC_WRITE_SHORT_NO_PARAM 0x03
* DSI_GERNERIC_WRITE_SHORT_1_PARAM 0x13
* DSI_GERNERIC_WRITE_SHORT_1_PARAM 0x23
* DSI_GERNERIC_WRITE_LONG_PACKET 0x29
* DSI_GERNERIC_READ_NO_PARAM 0x04
* DSI_GERNERIC_READ_1_PARAM 0x14
* DSI_GERNERIC_READ_2_PARAM 0x24
*/
/**
* struct mtk_ddic_dsi_msg - MTK write/read DDIC RG cmd buffer
* @channel: virtual channel id
* @flags: flags controlling this message transmission
* @type: payload data type array
* @tx_len: length of @tx_buf
* @tx_buf: data array to be written
* @tx_cmd_num: tx cmd number
* @rx_len: length of @rx_buf
* @rx_buf: data array to be read, or NULL
* @rx_cmd_num: rx cmd number
*/
struct mtk_ddic_dsi_msg {
u8 channel;
u16 flags;
u8 type[MAX_TX_CMD_NUM];
size_t tx_len[MAX_TX_CMD_NUM];
const void *tx_buf[MAX_TX_CMD_NUM];
size_t tx_cmd_num;
size_t rx_len[MAX_RX_CMD_NUM];
void *rx_buf[MAX_RX_CMD_NUM];
size_t rx_cmd_num;
};
struct DSI_RX_DATA_REG {
unsigned char byte0;
unsigned char byte1;
unsigned char byte2;
unsigned char byte3;
};
typedef void (*dcs_write_gce) (struct mtk_dsi *dsi, struct cmdq_pkt *handle,
const void *data, size_t len);
typedef void (*dcs_grp_write_gce) (struct mtk_dsi *dsi, struct cmdq_pkt *handle,
struct mtk_panel_para_table *para_table,
unsigned int para_size);
typedef int (*panel_tch_rst) (void);
enum MTK_PANEL_OUTPUT_MODE {
MTK_PANEL_SINGLE_PORT = 0x0,
MTK_PANEL_DSC_SINGLE_PORT,
MTK_PANEL_DUAL_PORT,
};
struct esd_check_item {
unsigned char cmd;
unsigned char count;
unsigned char para_list[RT_MAX_NUM];
unsigned char mask_list[RT_MAX_NUM];
};
enum MTK_PANEL_MODE_SWITCH_STAGE {
BEFORE_DSI_POWERDOWN,
AFTER_DSI_POWERON,
};
enum MIPITX_PHY_PORT {
MIPITX_PHY_PORT_0 = 0,
MIPITX_PHY_PORT_1,
MIPITX_PHY_PORT_NUM
};
enum MIPITX_PHY_LANE_SWAP {
MIPITX_PHY_LANE_0 = 0,
MIPITX_PHY_LANE_1,
MIPITX_PHY_LANE_2,
MIPITX_PHY_LANE_3,
MIPITX_PHY_LANE_CK,
MIPITX_PHY_LANE_RX,
MIPITX_PHY_LANE_NUM
};
enum FPS_CHANGE_INDEX {
DYNFPS_NOT_DEFINED = 0,
DYNFPS_DSI_VFP = 1,
DYNFPS_DSI_HFP = 2,
DYNFPS_DSI_MIPI_CLK = 4,
};
struct dsc_rc_range_parameters {
/**
* @range_min_qp: Min Quantization Parameters allowed for this range
*/
u8 range_min_qp;
/**
* @range_max_qp: Max Quantization Parameters allowed for this range
*/
u8 range_max_qp;
/**
* @range_bpg_offset:
* Bits/group offset to apply to target for this group
*/
u8 range_bpg_offset;
};
struct mtk_panel_dsc_params {
unsigned int enable;
unsigned int bdg_dsc_enable;
unsigned int ver; /* [7:4] major [3:0] minor */
unsigned int slice_mode;
unsigned int rgb_swap;
unsigned int dsc_cfg;
unsigned int rct_on;
unsigned int bit_per_channel;
unsigned int dsc_line_buf_depth;
unsigned int bp_enable;
unsigned int bit_per_pixel;
unsigned int pic_height; /* need to check */
unsigned int pic_width; /* need to check */
unsigned int slice_height;
unsigned int slice_width;
unsigned int chunk_size;
unsigned int xmit_delay;
unsigned int dec_delay;
unsigned int scale_value;
unsigned int increment_interval;
unsigned int decrement_interval;
unsigned int line_bpg_offset;
unsigned int nfl_bpg_offset;
unsigned int slice_bpg_offset;
unsigned int initial_offset;
unsigned int final_offset;
unsigned int flatness_minqp;
unsigned int flatness_maxqp;
unsigned int rc_model_size;
unsigned int rc_edge_factor;
unsigned int rc_quant_incr_limit0;
unsigned int rc_quant_incr_limit1;
unsigned int rc_tgt_offset_hi;
unsigned int rc_tgt_offset_lo;
unsigned int rc_buf_thresh[14];
struct dsc_rc_range_parameters rc_range_parameters[15];
};
struct mtk_dsi_phy_timcon {
unsigned int hs_trail;
unsigned int hs_prpr;
unsigned int hs_zero;
unsigned int lpx;
unsigned int ta_get;
unsigned int ta_sure;
unsigned int ta_go;
unsigned int da_hs_exit;
unsigned int clk_trail;
unsigned int cont_det;
unsigned int da_hs_sync;
unsigned int clk_zero;
unsigned int clk_hs_prpr;
unsigned int clk_hs_exit;
unsigned int clk_hs_post;
};
struct dynamic_mipi_params {
unsigned int switch_en;
unsigned int pll_clk;
unsigned int data_rate;
unsigned int vsa;
unsigned int vbp;
unsigned int vfp;
unsigned int vfp_lp_dyn;
unsigned int hsa;
unsigned int hbp;
unsigned int hfp;
};
struct dfps_switch_cmd {
unsigned int src_fps;
unsigned int cmd_num;
unsigned char para_list[64];
};
struct dynamic_fps_params {
unsigned int switch_en;
unsigned int vact_timing_fps;
unsigned int data_rate;
struct dfps_switch_cmd dfps_cmd_table[MAX_DYN_CMD_NUM];
};
struct mtk_panel_params {
#if defined(CONFIG_SMCDSD_PANEL)
struct drm_panel *dpanel;
#endif
unsigned int pll_clk;
unsigned int data_rate;
struct mtk_dsi_phy_timcon phy_timcon;
unsigned int vfp_low_power;
struct dynamic_mipi_params dyn;
struct dynamic_fps_params dyn_fps;
unsigned int cust_esd_check;
unsigned int esd_check_enable;
struct esd_check_item lcm_esd_check_table[ESD_CHECK_NUM];
unsigned int ssc_disable;
unsigned int bdg_ssc_disable;
unsigned int ssc_range;
int lcm_color_mode;
unsigned int min_luminance;
unsigned int average_luminance;
unsigned int max_luminance;
unsigned int round_corner_en;
unsigned int corner_pattern_height;
unsigned int corner_pattern_height_bot;
unsigned int corner_pattern_tp_size;
unsigned int corner_pattern_tp_size_l;
unsigned int corner_pattern_tp_size_r;
void *corner_pattern_lt_addr;
void *corner_pattern_lt_addr_l;
void *corner_pattern_lt_addr_r;
unsigned int physical_width_um;
unsigned int physical_height_um;
unsigned int lane_swap_en;
unsigned int is_cphy;
enum MIPITX_PHY_LANE_SWAP
lane_swap[MIPITX_PHY_PORT_NUM][MIPITX_PHY_LANE_NUM];
struct mtk_panel_dsc_params dsc_params;
unsigned int output_mode;
unsigned int lcm_cmd_if;
unsigned int hbm_en_time;
unsigned int hbm_dis_time;
unsigned int lcm_index;
unsigned int wait_sof_before_dec_vfp;
unsigned int doze_delay;
//Settings for LFR Function:
unsigned int lfr_enable;
unsigned int lfr_minimum_fps;
};
struct mtk_panel_ext {
struct mtk_panel_funcs *funcs;
struct mtk_panel_params *params;
};
struct mtk_panel_ctx {
struct drm_panel *panel;
struct mtk_panel_ext *ext;
struct list_head list;
};
struct mtk_panel_funcs {
#if defined(CONFIG_SMCDSD_PANEL)
int (*late_register)(struct drm_panel *panel);
int (*set_power)(struct drm_panel *panel, int power);
int (*crtc_state_notify)(struct drm_panel *panel, int active, int prepare);
int (*framedone_notify)(struct drm_panel *panel);
#endif
int (*set_backlight_cmdq)(void *dsi_drv, dcs_write_gce cb,
void *handle, unsigned int level);
int (*set_dispon_cmdq)(struct drm_panel *panel);
int (*set_aod_light_mode)(void *dsi_drv, dcs_write_gce cb,
void *handle, unsigned int mode);
int (*set_backlight_grp_cmdq)(void *dsi_drv, dcs_grp_write_gce cb,
void *handle, unsigned int level);
int (*reset)(struct drm_panel *panel, int on);
int (*ata_check)(struct drm_panel *panel);
int (*ext_param_set)(struct drm_panel *panel, unsigned int mode);
int (*ext_param_get)(struct mtk_panel_params *ext_para,
unsigned int mode);
int (*mode_switch)(struct drm_panel *panel, unsigned int cur_mode,
unsigned int dst_mode, enum MTK_PANEL_MODE_SWITCH_STAGE stage);
int (*get_virtual_heigh)(void);
int (*get_virtual_width)(void);
/**
* @doze_enable_start:
*
* Call the @doze_enable_start before starting AOD mode.
* The LCM off may add here to avoid panel show unexpected
* content when switching to specific panel low power mode.
*/
int (*doze_enable_start)(struct drm_panel *panel,
void *dsi_drv, dcs_write_gce cb, void *handle);
/**
* @doze_enable:
*
* Call the @doze_enable starts AOD mode.
*/
int (*doze_enable)(struct drm_panel *panel,
void *dsi_drv, dcs_write_gce cb, void *handle);
/**
* @doze_disable:
*
* Call the @doze_disable before ending AOD mode.
*/
int (*doze_disable)(struct drm_panel *panel,
void *dsi_drv, dcs_write_gce cb, void *handle);
/**
* @doze_post_disp_on:
*
* In some situation, the LCM off may set in @doze_enable & @disable.
* After LCM switch to the new mode stable, system call
* @doze_post_disp_on to turn on panel.
*/
int (*doze_post_disp_on)(struct drm_panel *panel,
void *dsi_drv, dcs_write_gce cb, void *handle);
/**
* @doze_area:
*
* Send the panel area in command here.
*/
int (*doze_area)(struct drm_panel *panel,
void *dsi_drv, dcs_write_gce cb, void *handle);
/**
* @doze_get_mode_flags:
*
* If CV switch is needed for doze mode, fill the mode_flags in this
* function for both CMD and VDO mode.
*/
unsigned long (*doze_get_mode_flags)(
struct drm_panel *panel, int aod_en);
int (*hbm_set_cmdq)(struct drm_panel *panel, void *dsi_drv,
dcs_write_gce cb, void *handle, bool en);
int (*hbm_set_lcm_cmdq)(struct drm_panel *panel, bool en);
void (*hbm_get_state)(struct drm_panel *panel, bool *state);
void (*hbm_get_wait_state)(struct drm_panel *panel, bool *wait);
bool (*hbm_set_wait_state)(struct drm_panel *panel, bool wait);
};
void mtk_panel_init(struct mtk_panel_ctx *ctx);
void mtk_panel_add(struct mtk_panel_ctx *ctx);
void mtk_panel_remove(struct mtk_panel_ctx *ctx);
int mtk_panel_attach(struct mtk_panel_ctx *ctx, struct drm_panel *panel);
int mtk_panel_detach(struct mtk_panel_ctx *ctx);
struct mtk_panel_ext *find_panel_ext(struct drm_panel *panel);
int mtk_panel_ext_create(struct device *dev,
struct mtk_panel_params *ext_params,
struct mtk_panel_funcs *ext_funcs,
struct drm_panel *panel);
int mtk_panel_tch_handle_reg(struct drm_panel *panel);
void **mtk_panel_tch_handle_init(void);
int mtk_panel_tch_rst(struct drm_panel *panel);
#endif