1130 lines
29 KiB
C
1130 lines
29 KiB
C
|
/*
|
||
|
* SMI PCIe driver for DVBSky cards.
|
||
|
*
|
||
|
* Copyright (C) 2014 Max nibble <nibble.max@gmail.com>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License as published by
|
||
|
* the Free Software Foundation; either version 2 of the License, or
|
||
|
* (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*/
|
||
|
|
||
|
#include "smipcie.h"
|
||
|
#include "m88ds3103.h"
|
||
|
#include "ts2020.h"
|
||
|
#include "m88rs6000t.h"
|
||
|
#include "si2168.h"
|
||
|
#include "si2157.h"
|
||
|
|
||
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
||
|
|
||
|
static int smi_hw_init(struct smi_dev *dev)
|
||
|
{
|
||
|
u32 port_mux, port_ctrl, int_stat;
|
||
|
|
||
|
/* set port mux.*/
|
||
|
port_mux = smi_read(MUX_MODE_CTRL);
|
||
|
port_mux &= ~(rbPaMSMask);
|
||
|
port_mux |= rbPaMSDtvNoGpio;
|
||
|
port_mux &= ~(rbPbMSMask);
|
||
|
port_mux |= rbPbMSDtvNoGpio;
|
||
|
port_mux &= ~(0x0f0000);
|
||
|
port_mux |= 0x50000;
|
||
|
smi_write(MUX_MODE_CTRL, port_mux);
|
||
|
|
||
|
/* set DTV register.*/
|
||
|
/* Port A */
|
||
|
port_ctrl = smi_read(VIDEO_CTRL_STATUS_A);
|
||
|
port_ctrl &= ~0x01;
|
||
|
smi_write(VIDEO_CTRL_STATUS_A, port_ctrl);
|
||
|
port_ctrl = smi_read(MPEG2_CTRL_A);
|
||
|
port_ctrl &= ~0x40;
|
||
|
port_ctrl |= 0x80;
|
||
|
smi_write(MPEG2_CTRL_A, port_ctrl);
|
||
|
/* Port B */
|
||
|
port_ctrl = smi_read(VIDEO_CTRL_STATUS_B);
|
||
|
port_ctrl &= ~0x01;
|
||
|
smi_write(VIDEO_CTRL_STATUS_B, port_ctrl);
|
||
|
port_ctrl = smi_read(MPEG2_CTRL_B);
|
||
|
port_ctrl &= ~0x40;
|
||
|
port_ctrl |= 0x80;
|
||
|
smi_write(MPEG2_CTRL_B, port_ctrl);
|
||
|
|
||
|
/* disable and clear interrupt.*/
|
||
|
smi_write(MSI_INT_ENA_CLR, ALL_INT);
|
||
|
int_stat = smi_read(MSI_INT_STATUS);
|
||
|
smi_write(MSI_INT_STATUS_CLR, int_stat);
|
||
|
|
||
|
/* reset demod.*/
|
||
|
smi_clear(PERIPHERAL_CTRL, 0x0303);
|
||
|
msleep(50);
|
||
|
smi_set(PERIPHERAL_CTRL, 0x0101);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/* i2c bit bus.*/
|
||
|
static void smi_i2c_cfg(struct smi_dev *dev, u32 sw_ctl)
|
||
|
{
|
||
|
u32 dwCtrl;
|
||
|
|
||
|
dwCtrl = smi_read(sw_ctl);
|
||
|
dwCtrl &= ~0x18; /* disable output.*/
|
||
|
dwCtrl |= 0x21; /* reset and software mode.*/
|
||
|
dwCtrl &= ~0xff00;
|
||
|
dwCtrl |= 0x6400;
|
||
|
smi_write(sw_ctl, dwCtrl);
|
||
|
msleep(20);
|
||
|
dwCtrl = smi_read(sw_ctl);
|
||
|
dwCtrl &= ~0x20;
|
||
|
smi_write(sw_ctl, dwCtrl);
|
||
|
}
|
||
|
|
||
|
static void smi_i2c_setsda(struct smi_dev *dev, int state, u32 sw_ctl)
|
||
|
{
|
||
|
if (state) {
|
||
|
/* set as input.*/
|
||
|
smi_clear(sw_ctl, SW_I2C_MSK_DAT_EN);
|
||
|
} else {
|
||
|
smi_clear(sw_ctl, SW_I2C_MSK_DAT_OUT);
|
||
|
/* set as output.*/
|
||
|
smi_set(sw_ctl, SW_I2C_MSK_DAT_EN);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void smi_i2c_setscl(void *data, int state, u32 sw_ctl)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
if (state) {
|
||
|
/* set as input.*/
|
||
|
smi_clear(sw_ctl, SW_I2C_MSK_CLK_EN);
|
||
|
} else {
|
||
|
smi_clear(sw_ctl, SW_I2C_MSK_CLK_OUT);
|
||
|
/* set as output.*/
|
||
|
smi_set(sw_ctl, SW_I2C_MSK_CLK_EN);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int smi_i2c_getsda(void *data, u32 sw_ctl)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
/* set as input.*/
|
||
|
smi_clear(sw_ctl, SW_I2C_MSK_DAT_EN);
|
||
|
udelay(1);
|
||
|
return (smi_read(sw_ctl) & SW_I2C_MSK_DAT_IN) ? 1 : 0;
|
||
|
}
|
||
|
|
||
|
static int smi_i2c_getscl(void *data, u32 sw_ctl)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
/* set as input.*/
|
||
|
smi_clear(sw_ctl, SW_I2C_MSK_CLK_EN);
|
||
|
udelay(1);
|
||
|
return (smi_read(sw_ctl) & SW_I2C_MSK_CLK_IN) ? 1 : 0;
|
||
|
}
|
||
|
/* i2c 0.*/
|
||
|
static void smi_i2c0_setsda(void *data, int state)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
smi_i2c_setsda(dev, state, I2C_A_SW_CTL);
|
||
|
}
|
||
|
|
||
|
static void smi_i2c0_setscl(void *data, int state)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
smi_i2c_setscl(dev, state, I2C_A_SW_CTL);
|
||
|
}
|
||
|
|
||
|
static int smi_i2c0_getsda(void *data)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
return smi_i2c_getsda(dev, I2C_A_SW_CTL);
|
||
|
}
|
||
|
|
||
|
static int smi_i2c0_getscl(void *data)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
return smi_i2c_getscl(dev, I2C_A_SW_CTL);
|
||
|
}
|
||
|
/* i2c 1.*/
|
||
|
static void smi_i2c1_setsda(void *data, int state)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
smi_i2c_setsda(dev, state, I2C_B_SW_CTL);
|
||
|
}
|
||
|
|
||
|
static void smi_i2c1_setscl(void *data, int state)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
smi_i2c_setscl(dev, state, I2C_B_SW_CTL);
|
||
|
}
|
||
|
|
||
|
static int smi_i2c1_getsda(void *data)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
return smi_i2c_getsda(dev, I2C_B_SW_CTL);
|
||
|
}
|
||
|
|
||
|
static int smi_i2c1_getscl(void *data)
|
||
|
{
|
||
|
struct smi_dev *dev = data;
|
||
|
|
||
|
return smi_i2c_getscl(dev, I2C_B_SW_CTL);
|
||
|
}
|
||
|
|
||
|
static int smi_i2c_init(struct smi_dev *dev)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
/* i2c bus 0 */
|
||
|
smi_i2c_cfg(dev, I2C_A_SW_CTL);
|
||
|
i2c_set_adapdata(&dev->i2c_bus[0], dev);
|
||
|
strcpy(dev->i2c_bus[0].name, "SMI-I2C0");
|
||
|
dev->i2c_bus[0].owner = THIS_MODULE;
|
||
|
dev->i2c_bus[0].dev.parent = &dev->pci_dev->dev;
|
||
|
dev->i2c_bus[0].algo_data = &dev->i2c_bit[0];
|
||
|
dev->i2c_bit[0].data = dev;
|
||
|
dev->i2c_bit[0].setsda = smi_i2c0_setsda;
|
||
|
dev->i2c_bit[0].setscl = smi_i2c0_setscl;
|
||
|
dev->i2c_bit[0].getsda = smi_i2c0_getsda;
|
||
|
dev->i2c_bit[0].getscl = smi_i2c0_getscl;
|
||
|
dev->i2c_bit[0].udelay = 12;
|
||
|
dev->i2c_bit[0].timeout = 10;
|
||
|
/* Raise SCL and SDA */
|
||
|
smi_i2c0_setsda(dev, 1);
|
||
|
smi_i2c0_setscl(dev, 1);
|
||
|
|
||
|
ret = i2c_bit_add_bus(&dev->i2c_bus[0]);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* i2c bus 1 */
|
||
|
smi_i2c_cfg(dev, I2C_B_SW_CTL);
|
||
|
i2c_set_adapdata(&dev->i2c_bus[1], dev);
|
||
|
strcpy(dev->i2c_bus[1].name, "SMI-I2C1");
|
||
|
dev->i2c_bus[1].owner = THIS_MODULE;
|
||
|
dev->i2c_bus[1].dev.parent = &dev->pci_dev->dev;
|
||
|
dev->i2c_bus[1].algo_data = &dev->i2c_bit[1];
|
||
|
dev->i2c_bit[1].data = dev;
|
||
|
dev->i2c_bit[1].setsda = smi_i2c1_setsda;
|
||
|
dev->i2c_bit[1].setscl = smi_i2c1_setscl;
|
||
|
dev->i2c_bit[1].getsda = smi_i2c1_getsda;
|
||
|
dev->i2c_bit[1].getscl = smi_i2c1_getscl;
|
||
|
dev->i2c_bit[1].udelay = 12;
|
||
|
dev->i2c_bit[1].timeout = 10;
|
||
|
/* Raise SCL and SDA */
|
||
|
smi_i2c1_setsda(dev, 1);
|
||
|
smi_i2c1_setscl(dev, 1);
|
||
|
|
||
|
ret = i2c_bit_add_bus(&dev->i2c_bus[1]);
|
||
|
if (ret < 0)
|
||
|
i2c_del_adapter(&dev->i2c_bus[0]);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void smi_i2c_exit(struct smi_dev *dev)
|
||
|
{
|
||
|
i2c_del_adapter(&dev->i2c_bus[0]);
|
||
|
i2c_del_adapter(&dev->i2c_bus[1]);
|
||
|
}
|
||
|
|
||
|
static int smi_read_eeprom(struct i2c_adapter *i2c, u16 reg, u8 *data, u16 size)
|
||
|
{
|
||
|
int ret;
|
||
|
u8 b0[2] = { (reg >> 8) & 0xff, reg & 0xff };
|
||
|
|
||
|
struct i2c_msg msg[] = {
|
||
|
{ .addr = 0x50, .flags = 0,
|
||
|
.buf = b0, .len = 2 },
|
||
|
{ .addr = 0x50, .flags = I2C_M_RD,
|
||
|
.buf = data, .len = size }
|
||
|
};
|
||
|
|
||
|
ret = i2c_transfer(i2c, msg, 2);
|
||
|
|
||
|
if (ret != 2) {
|
||
|
dev_err(&i2c->dev, "%s: reg=0x%x (error=%d)\n",
|
||
|
__func__, reg, ret);
|
||
|
return ret;
|
||
|
}
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
/* ts port interrupt operations */
|
||
|
static void smi_port_disableInterrupt(struct smi_port *port)
|
||
|
{
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
|
||
|
smi_write(MSI_INT_ENA_CLR,
|
||
|
(port->_dmaInterruptCH0 | port->_dmaInterruptCH1));
|
||
|
}
|
||
|
|
||
|
static void smi_port_enableInterrupt(struct smi_port *port)
|
||
|
{
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
|
||
|
smi_write(MSI_INT_ENA_SET,
|
||
|
(port->_dmaInterruptCH0 | port->_dmaInterruptCH1));
|
||
|
}
|
||
|
|
||
|
static void smi_port_clearInterrupt(struct smi_port *port)
|
||
|
{
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
|
||
|
smi_write(MSI_INT_STATUS_CLR,
|
||
|
(port->_dmaInterruptCH0 | port->_dmaInterruptCH1));
|
||
|
}
|
||
|
|
||
|
/* tasklet handler: DMA data to dmx.*/
|
||
|
static void smi_dma_xfer(unsigned long data)
|
||
|
{
|
||
|
struct smi_port *port = (struct smi_port *) data;
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
u32 intr_status, finishedData, dmaManagement;
|
||
|
u8 dmaChan0State, dmaChan1State;
|
||
|
|
||
|
intr_status = port->_int_status;
|
||
|
dmaManagement = smi_read(port->DMA_MANAGEMENT);
|
||
|
dmaChan0State = (u8)((dmaManagement & 0x00000030) >> 4);
|
||
|
dmaChan1State = (u8)((dmaManagement & 0x00300000) >> 20);
|
||
|
|
||
|
/* CH-0 DMA interrupt.*/
|
||
|
if ((intr_status & port->_dmaInterruptCH0) && (dmaChan0State == 0x01)) {
|
||
|
dev_dbg(&dev->pci_dev->dev,
|
||
|
"Port[%d]-DMA CH0 engine complete successful !\n",
|
||
|
port->idx);
|
||
|
finishedData = smi_read(port->DMA_CHAN0_TRANS_STATE);
|
||
|
finishedData &= 0x003FFFFF;
|
||
|
/* value of DMA_PORT0_CHAN0_TRANS_STATE register [21:0]
|
||
|
* indicate dma total transfer length and
|
||
|
* zero of [21:0] indicate dma total transfer length
|
||
|
* equal to 0x400000 (4MB)*/
|
||
|
if (finishedData == 0)
|
||
|
finishedData = 0x00400000;
|
||
|
if (finishedData != SMI_TS_DMA_BUF_SIZE) {
|
||
|
dev_dbg(&dev->pci_dev->dev,
|
||
|
"DMA CH0 engine complete length mismatched, finish data=%d !\n",
|
||
|
finishedData);
|
||
|
}
|
||
|
dvb_dmx_swfilter_packets(&port->demux,
|
||
|
port->cpu_addr[0], (finishedData / 188));
|
||
|
/*dvb_dmx_swfilter(&port->demux,
|
||
|
port->cpu_addr[0], finishedData);*/
|
||
|
}
|
||
|
/* CH-1 DMA interrupt.*/
|
||
|
if ((intr_status & port->_dmaInterruptCH1) && (dmaChan1State == 0x01)) {
|
||
|
dev_dbg(&dev->pci_dev->dev,
|
||
|
"Port[%d]-DMA CH1 engine complete successful !\n",
|
||
|
port->idx);
|
||
|
finishedData = smi_read(port->DMA_CHAN1_TRANS_STATE);
|
||
|
finishedData &= 0x003FFFFF;
|
||
|
/* value of DMA_PORT0_CHAN0_TRANS_STATE register [21:0]
|
||
|
* indicate dma total transfer length and
|
||
|
* zero of [21:0] indicate dma total transfer length
|
||
|
* equal to 0x400000 (4MB)*/
|
||
|
if (finishedData == 0)
|
||
|
finishedData = 0x00400000;
|
||
|
if (finishedData != SMI_TS_DMA_BUF_SIZE) {
|
||
|
dev_dbg(&dev->pci_dev->dev,
|
||
|
"DMA CH1 engine complete length mismatched, finish data=%d !\n",
|
||
|
finishedData);
|
||
|
}
|
||
|
dvb_dmx_swfilter_packets(&port->demux,
|
||
|
port->cpu_addr[1], (finishedData / 188));
|
||
|
/*dvb_dmx_swfilter(&port->demux,
|
||
|
port->cpu_addr[1], finishedData);*/
|
||
|
}
|
||
|
/* restart DMA.*/
|
||
|
if (intr_status & port->_dmaInterruptCH0)
|
||
|
dmaManagement |= 0x00000002;
|
||
|
if (intr_status & port->_dmaInterruptCH1)
|
||
|
dmaManagement |= 0x00020000;
|
||
|
smi_write(port->DMA_MANAGEMENT, dmaManagement);
|
||
|
/* Re-enable interrupts */
|
||
|
smi_port_enableInterrupt(port);
|
||
|
}
|
||
|
|
||
|
static void smi_port_dma_free(struct smi_port *port)
|
||
|
{
|
||
|
if (port->cpu_addr[0]) {
|
||
|
pci_free_consistent(port->dev->pci_dev, SMI_TS_DMA_BUF_SIZE,
|
||
|
port->cpu_addr[0], port->dma_addr[0]);
|
||
|
port->cpu_addr[0] = NULL;
|
||
|
}
|
||
|
if (port->cpu_addr[1]) {
|
||
|
pci_free_consistent(port->dev->pci_dev, SMI_TS_DMA_BUF_SIZE,
|
||
|
port->cpu_addr[1], port->dma_addr[1]);
|
||
|
port->cpu_addr[1] = NULL;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int smi_port_init(struct smi_port *port, int dmaChanUsed)
|
||
|
{
|
||
|
dev_dbg(&port->dev->pci_dev->dev,
|
||
|
"%s, port %d, dmaused %d\n", __func__, port->idx, dmaChanUsed);
|
||
|
port->enable = 0;
|
||
|
if (port->idx == 0) {
|
||
|
/* Port A */
|
||
|
port->_dmaInterruptCH0 = dmaChanUsed & 0x01;
|
||
|
port->_dmaInterruptCH1 = dmaChanUsed & 0x02;
|
||
|
|
||
|
port->DMA_CHAN0_ADDR_LOW = DMA_PORTA_CHAN0_ADDR_LOW;
|
||
|
port->DMA_CHAN0_ADDR_HI = DMA_PORTA_CHAN0_ADDR_HI;
|
||
|
port->DMA_CHAN0_TRANS_STATE = DMA_PORTA_CHAN0_TRANS_STATE;
|
||
|
port->DMA_CHAN0_CONTROL = DMA_PORTA_CHAN0_CONTROL;
|
||
|
port->DMA_CHAN1_ADDR_LOW = DMA_PORTA_CHAN1_ADDR_LOW;
|
||
|
port->DMA_CHAN1_ADDR_HI = DMA_PORTA_CHAN1_ADDR_HI;
|
||
|
port->DMA_CHAN1_TRANS_STATE = DMA_PORTA_CHAN1_TRANS_STATE;
|
||
|
port->DMA_CHAN1_CONTROL = DMA_PORTA_CHAN1_CONTROL;
|
||
|
port->DMA_MANAGEMENT = DMA_PORTA_MANAGEMENT;
|
||
|
} else {
|
||
|
/* Port B */
|
||
|
port->_dmaInterruptCH0 = (dmaChanUsed << 2) & 0x04;
|
||
|
port->_dmaInterruptCH1 = (dmaChanUsed << 2) & 0x08;
|
||
|
|
||
|
port->DMA_CHAN0_ADDR_LOW = DMA_PORTB_CHAN0_ADDR_LOW;
|
||
|
port->DMA_CHAN0_ADDR_HI = DMA_PORTB_CHAN0_ADDR_HI;
|
||
|
port->DMA_CHAN0_TRANS_STATE = DMA_PORTB_CHAN0_TRANS_STATE;
|
||
|
port->DMA_CHAN0_CONTROL = DMA_PORTB_CHAN0_CONTROL;
|
||
|
port->DMA_CHAN1_ADDR_LOW = DMA_PORTB_CHAN1_ADDR_LOW;
|
||
|
port->DMA_CHAN1_ADDR_HI = DMA_PORTB_CHAN1_ADDR_HI;
|
||
|
port->DMA_CHAN1_TRANS_STATE = DMA_PORTB_CHAN1_TRANS_STATE;
|
||
|
port->DMA_CHAN1_CONTROL = DMA_PORTB_CHAN1_CONTROL;
|
||
|
port->DMA_MANAGEMENT = DMA_PORTB_MANAGEMENT;
|
||
|
}
|
||
|
|
||
|
if (port->_dmaInterruptCH0) {
|
||
|
port->cpu_addr[0] = pci_alloc_consistent(port->dev->pci_dev,
|
||
|
SMI_TS_DMA_BUF_SIZE,
|
||
|
&port->dma_addr[0]);
|
||
|
if (!port->cpu_addr[0]) {
|
||
|
dev_err(&port->dev->pci_dev->dev,
|
||
|
"Port[%d] DMA CH0 memory allocation failed!\n",
|
||
|
port->idx);
|
||
|
goto err;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (port->_dmaInterruptCH1) {
|
||
|
port->cpu_addr[1] = pci_alloc_consistent(port->dev->pci_dev,
|
||
|
SMI_TS_DMA_BUF_SIZE,
|
||
|
&port->dma_addr[1]);
|
||
|
if (!port->cpu_addr[1]) {
|
||
|
dev_err(&port->dev->pci_dev->dev,
|
||
|
"Port[%d] DMA CH1 memory allocation failed!\n",
|
||
|
port->idx);
|
||
|
goto err;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
smi_port_disableInterrupt(port);
|
||
|
tasklet_init(&port->tasklet, smi_dma_xfer, (unsigned long)port);
|
||
|
tasklet_disable(&port->tasklet);
|
||
|
port->enable = 1;
|
||
|
return 0;
|
||
|
err:
|
||
|
smi_port_dma_free(port);
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
static void smi_port_exit(struct smi_port *port)
|
||
|
{
|
||
|
smi_port_disableInterrupt(port);
|
||
|
tasklet_kill(&port->tasklet);
|
||
|
smi_port_dma_free(port);
|
||
|
port->enable = 0;
|
||
|
}
|
||
|
|
||
|
static int smi_port_irq(struct smi_port *port, u32 int_status)
|
||
|
{
|
||
|
u32 port_req_irq = port->_dmaInterruptCH0 | port->_dmaInterruptCH1;
|
||
|
int handled = 0;
|
||
|
|
||
|
if (int_status & port_req_irq) {
|
||
|
smi_port_disableInterrupt(port);
|
||
|
port->_int_status = int_status;
|
||
|
smi_port_clearInterrupt(port);
|
||
|
tasklet_schedule(&port->tasklet);
|
||
|
handled = 1;
|
||
|
}
|
||
|
return handled;
|
||
|
}
|
||
|
|
||
|
static irqreturn_t smi_irq_handler(int irq, void *dev_id)
|
||
|
{
|
||
|
struct smi_dev *dev = dev_id;
|
||
|
struct smi_port *port0 = &dev->ts_port[0];
|
||
|
struct smi_port *port1 = &dev->ts_port[1];
|
||
|
struct smi_rc *ir = &dev->ir;
|
||
|
int handled = 0;
|
||
|
|
||
|
u32 intr_status = smi_read(MSI_INT_STATUS);
|
||
|
|
||
|
/* ts0 interrupt.*/
|
||
|
if (dev->info->ts_0)
|
||
|
handled += smi_port_irq(port0, intr_status);
|
||
|
|
||
|
/* ts1 interrupt.*/
|
||
|
if (dev->info->ts_1)
|
||
|
handled += smi_port_irq(port1, intr_status);
|
||
|
|
||
|
/* ir interrupt.*/
|
||
|
handled += smi_ir_irq(ir, intr_status);
|
||
|
|
||
|
return IRQ_RETVAL(handled);
|
||
|
}
|
||
|
|
||
|
static struct i2c_client *smi_add_i2c_client(struct i2c_adapter *adapter,
|
||
|
struct i2c_board_info *info)
|
||
|
{
|
||
|
struct i2c_client *client;
|
||
|
|
||
|
request_module(info->type);
|
||
|
client = i2c_new_device(adapter, info);
|
||
|
if (client == NULL || client->dev.driver == NULL)
|
||
|
goto err_add_i2c_client;
|
||
|
|
||
|
if (!try_module_get(client->dev.driver->owner)) {
|
||
|
i2c_unregister_device(client);
|
||
|
goto err_add_i2c_client;
|
||
|
}
|
||
|
return client;
|
||
|
|
||
|
err_add_i2c_client:
|
||
|
client = NULL;
|
||
|
return client;
|
||
|
}
|
||
|
|
||
|
static void smi_del_i2c_client(struct i2c_client *client)
|
||
|
{
|
||
|
module_put(client->dev.driver->owner);
|
||
|
i2c_unregister_device(client);
|
||
|
}
|
||
|
|
||
|
static const struct m88ds3103_config smi_dvbsky_m88ds3103_cfg = {
|
||
|
.i2c_addr = 0x68,
|
||
|
.clock = 27000000,
|
||
|
.i2c_wr_max = 33,
|
||
|
.clock_out = 0,
|
||
|
.ts_mode = M88DS3103_TS_PARALLEL,
|
||
|
.ts_clk = 16000,
|
||
|
.ts_clk_pol = 1,
|
||
|
.agc = 0x99,
|
||
|
.lnb_hv_pol = 0,
|
||
|
.lnb_en_pol = 1,
|
||
|
};
|
||
|
|
||
|
static int smi_dvbsky_m88ds3103_fe_attach(struct smi_port *port)
|
||
|
{
|
||
|
int ret = 0;
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
struct i2c_adapter *i2c;
|
||
|
/* tuner I2C module */
|
||
|
struct i2c_adapter *tuner_i2c_adapter;
|
||
|
struct i2c_client *tuner_client;
|
||
|
struct i2c_board_info tuner_info;
|
||
|
struct ts2020_config ts2020_config = {};
|
||
|
memset(&tuner_info, 0, sizeof(struct i2c_board_info));
|
||
|
i2c = (port->idx == 0) ? &dev->i2c_bus[0] : &dev->i2c_bus[1];
|
||
|
|
||
|
/* attach demod */
|
||
|
port->fe = dvb_attach(m88ds3103_attach,
|
||
|
&smi_dvbsky_m88ds3103_cfg, i2c, &tuner_i2c_adapter);
|
||
|
if (!port->fe) {
|
||
|
ret = -ENODEV;
|
||
|
return ret;
|
||
|
}
|
||
|
/* attach tuner */
|
||
|
ts2020_config.fe = port->fe;
|
||
|
strlcpy(tuner_info.type, "ts2020", I2C_NAME_SIZE);
|
||
|
tuner_info.addr = 0x60;
|
||
|
tuner_info.platform_data = &ts2020_config;
|
||
|
tuner_client = smi_add_i2c_client(tuner_i2c_adapter, &tuner_info);
|
||
|
if (!tuner_client) {
|
||
|
ret = -ENODEV;
|
||
|
goto err_tuner_i2c_device;
|
||
|
}
|
||
|
|
||
|
/* delegate signal strength measurement to tuner */
|
||
|
port->fe->ops.read_signal_strength =
|
||
|
port->fe->ops.tuner_ops.get_rf_strength;
|
||
|
|
||
|
port->i2c_client_tuner = tuner_client;
|
||
|
return ret;
|
||
|
|
||
|
err_tuner_i2c_device:
|
||
|
dvb_frontend_detach(port->fe);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static const struct m88ds3103_config smi_dvbsky_m88rs6000_cfg = {
|
||
|
.i2c_addr = 0x69,
|
||
|
.clock = 27000000,
|
||
|
.i2c_wr_max = 33,
|
||
|
.ts_mode = M88DS3103_TS_PARALLEL,
|
||
|
.ts_clk = 16000,
|
||
|
.ts_clk_pol = 1,
|
||
|
.agc = 0x99,
|
||
|
.lnb_hv_pol = 0,
|
||
|
.lnb_en_pol = 1,
|
||
|
};
|
||
|
|
||
|
static int smi_dvbsky_m88rs6000_fe_attach(struct smi_port *port)
|
||
|
{
|
||
|
int ret = 0;
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
struct i2c_adapter *i2c;
|
||
|
/* tuner I2C module */
|
||
|
struct i2c_adapter *tuner_i2c_adapter;
|
||
|
struct i2c_client *tuner_client;
|
||
|
struct i2c_board_info tuner_info;
|
||
|
struct m88rs6000t_config m88rs6000t_config;
|
||
|
|
||
|
memset(&tuner_info, 0, sizeof(struct i2c_board_info));
|
||
|
i2c = (port->idx == 0) ? &dev->i2c_bus[0] : &dev->i2c_bus[1];
|
||
|
|
||
|
/* attach demod */
|
||
|
port->fe = dvb_attach(m88ds3103_attach,
|
||
|
&smi_dvbsky_m88rs6000_cfg, i2c, &tuner_i2c_adapter);
|
||
|
if (!port->fe) {
|
||
|
ret = -ENODEV;
|
||
|
return ret;
|
||
|
}
|
||
|
/* attach tuner */
|
||
|
m88rs6000t_config.fe = port->fe;
|
||
|
strlcpy(tuner_info.type, "m88rs6000t", I2C_NAME_SIZE);
|
||
|
tuner_info.addr = 0x21;
|
||
|
tuner_info.platform_data = &m88rs6000t_config;
|
||
|
tuner_client = smi_add_i2c_client(tuner_i2c_adapter, &tuner_info);
|
||
|
if (!tuner_client) {
|
||
|
ret = -ENODEV;
|
||
|
goto err_tuner_i2c_device;
|
||
|
}
|
||
|
|
||
|
/* delegate signal strength measurement to tuner */
|
||
|
port->fe->ops.read_signal_strength =
|
||
|
port->fe->ops.tuner_ops.get_rf_strength;
|
||
|
|
||
|
port->i2c_client_tuner = tuner_client;
|
||
|
return ret;
|
||
|
|
||
|
err_tuner_i2c_device:
|
||
|
dvb_frontend_detach(port->fe);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int smi_dvbsky_sit2_fe_attach(struct smi_port *port)
|
||
|
{
|
||
|
int ret = 0;
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
struct i2c_adapter *i2c;
|
||
|
struct i2c_adapter *tuner_i2c_adapter;
|
||
|
struct i2c_client *client_tuner, *client_demod;
|
||
|
struct i2c_board_info client_info;
|
||
|
struct si2168_config si2168_config;
|
||
|
struct si2157_config si2157_config;
|
||
|
|
||
|
/* select i2c bus */
|
||
|
i2c = (port->idx == 0) ? &dev->i2c_bus[0] : &dev->i2c_bus[1];
|
||
|
|
||
|
/* attach demod */
|
||
|
memset(&si2168_config, 0, sizeof(si2168_config));
|
||
|
si2168_config.i2c_adapter = &tuner_i2c_adapter;
|
||
|
si2168_config.fe = &port->fe;
|
||
|
si2168_config.ts_mode = SI2168_TS_PARALLEL;
|
||
|
|
||
|
memset(&client_info, 0, sizeof(struct i2c_board_info));
|
||
|
strlcpy(client_info.type, "si2168", I2C_NAME_SIZE);
|
||
|
client_info.addr = 0x64;
|
||
|
client_info.platform_data = &si2168_config;
|
||
|
|
||
|
client_demod = smi_add_i2c_client(i2c, &client_info);
|
||
|
if (!client_demod) {
|
||
|
ret = -ENODEV;
|
||
|
return ret;
|
||
|
}
|
||
|
port->i2c_client_demod = client_demod;
|
||
|
|
||
|
/* attach tuner */
|
||
|
memset(&si2157_config, 0, sizeof(si2157_config));
|
||
|
si2157_config.fe = port->fe;
|
||
|
si2157_config.if_port = 1;
|
||
|
|
||
|
memset(&client_info, 0, sizeof(struct i2c_board_info));
|
||
|
strlcpy(client_info.type, "si2157", I2C_NAME_SIZE);
|
||
|
client_info.addr = 0x60;
|
||
|
client_info.platform_data = &si2157_config;
|
||
|
|
||
|
client_tuner = smi_add_i2c_client(tuner_i2c_adapter, &client_info);
|
||
|
if (!client_tuner) {
|
||
|
smi_del_i2c_client(port->i2c_client_demod);
|
||
|
port->i2c_client_demod = NULL;
|
||
|
ret = -ENODEV;
|
||
|
return ret;
|
||
|
}
|
||
|
port->i2c_client_tuner = client_tuner;
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int smi_fe_init(struct smi_port *port)
|
||
|
{
|
||
|
int ret = 0;
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
struct dvb_adapter *adap = &port->dvb_adapter;
|
||
|
u8 mac_ee[16];
|
||
|
|
||
|
dev_dbg(&port->dev->pci_dev->dev,
|
||
|
"%s: port %d, fe_type = %d\n",
|
||
|
__func__, port->idx, port->fe_type);
|
||
|
switch (port->fe_type) {
|
||
|
case DVBSKY_FE_M88DS3103:
|
||
|
ret = smi_dvbsky_m88ds3103_fe_attach(port);
|
||
|
break;
|
||
|
case DVBSKY_FE_M88RS6000:
|
||
|
ret = smi_dvbsky_m88rs6000_fe_attach(port);
|
||
|
break;
|
||
|
case DVBSKY_FE_SIT2:
|
||
|
ret = smi_dvbsky_sit2_fe_attach(port);
|
||
|
break;
|
||
|
}
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
/* register dvb frontend */
|
||
|
ret = dvb_register_frontend(adap, port->fe);
|
||
|
if (ret < 0) {
|
||
|
if (port->i2c_client_tuner)
|
||
|
smi_del_i2c_client(port->i2c_client_tuner);
|
||
|
if (port->i2c_client_demod)
|
||
|
smi_del_i2c_client(port->i2c_client_demod);
|
||
|
dvb_frontend_detach(port->fe);
|
||
|
return ret;
|
||
|
}
|
||
|
/* init MAC.*/
|
||
|
ret = smi_read_eeprom(&dev->i2c_bus[0], 0xc0, mac_ee, 16);
|
||
|
dev_info(&port->dev->pci_dev->dev,
|
||
|
"%s port %d MAC: %pM\n", dev->info->name,
|
||
|
port->idx, mac_ee + (port->idx)*8);
|
||
|
memcpy(adap->proposed_mac, mac_ee + (port->idx)*8, 6);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void smi_fe_exit(struct smi_port *port)
|
||
|
{
|
||
|
dvb_unregister_frontend(port->fe);
|
||
|
/* remove I2C demod and tuner */
|
||
|
if (port->i2c_client_tuner)
|
||
|
smi_del_i2c_client(port->i2c_client_tuner);
|
||
|
if (port->i2c_client_demod)
|
||
|
smi_del_i2c_client(port->i2c_client_demod);
|
||
|
dvb_frontend_detach(port->fe);
|
||
|
}
|
||
|
|
||
|
static int my_dvb_dmx_ts_card_init(struct dvb_demux *dvbdemux, char *id,
|
||
|
int (*start_feed)(struct dvb_demux_feed *),
|
||
|
int (*stop_feed)(struct dvb_demux_feed *),
|
||
|
void *priv)
|
||
|
{
|
||
|
dvbdemux->priv = priv;
|
||
|
|
||
|
dvbdemux->filternum = 256;
|
||
|
dvbdemux->feednum = 256;
|
||
|
dvbdemux->start_feed = start_feed;
|
||
|
dvbdemux->stop_feed = stop_feed;
|
||
|
dvbdemux->write_to_decoder = NULL;
|
||
|
dvbdemux->dmx.capabilities = (DMX_TS_FILTERING |
|
||
|
DMX_SECTION_FILTERING |
|
||
|
DMX_MEMORY_BASED_FILTERING);
|
||
|
return dvb_dmx_init(dvbdemux);
|
||
|
}
|
||
|
|
||
|
static int my_dvb_dmxdev_ts_card_init(struct dmxdev *dmxdev,
|
||
|
struct dvb_demux *dvbdemux,
|
||
|
struct dmx_frontend *hw_frontend,
|
||
|
struct dmx_frontend *mem_frontend,
|
||
|
struct dvb_adapter *dvb_adapter)
|
||
|
{
|
||
|
int ret;
|
||
|
|
||
|
dmxdev->filternum = 256;
|
||
|
dmxdev->demux = &dvbdemux->dmx;
|
||
|
dmxdev->capabilities = 0;
|
||
|
ret = dvb_dmxdev_init(dmxdev, dvb_adapter);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
|
||
|
hw_frontend->source = DMX_FRONTEND_0;
|
||
|
dvbdemux->dmx.add_frontend(&dvbdemux->dmx, hw_frontend);
|
||
|
mem_frontend->source = DMX_MEMORY_FE;
|
||
|
dvbdemux->dmx.add_frontend(&dvbdemux->dmx, mem_frontend);
|
||
|
return dvbdemux->dmx.connect_frontend(&dvbdemux->dmx, hw_frontend);
|
||
|
}
|
||
|
|
||
|
static u32 smi_config_DMA(struct smi_port *port)
|
||
|
{
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
u32 totalLength = 0, dmaMemPtrLow, dmaMemPtrHi, dmaCtlReg;
|
||
|
u8 chanLatencyTimer = 0, dmaChanEnable = 1, dmaTransStart = 1;
|
||
|
u32 dmaManagement = 0, tlpTransUnit = DMA_TRANS_UNIT_188;
|
||
|
u8 tlpTc = 0, tlpTd = 1, tlpEp = 0, tlpAttr = 0;
|
||
|
u64 mem;
|
||
|
|
||
|
dmaManagement = smi_read(port->DMA_MANAGEMENT);
|
||
|
/* Setup Channel-0 */
|
||
|
if (port->_dmaInterruptCH0) {
|
||
|
totalLength = SMI_TS_DMA_BUF_SIZE;
|
||
|
mem = port->dma_addr[0];
|
||
|
dmaMemPtrLow = mem & 0xffffffff;
|
||
|
dmaMemPtrHi = mem >> 32;
|
||
|
dmaCtlReg = (totalLength) | (tlpTransUnit << 22) | (tlpTc << 25)
|
||
|
| (tlpTd << 28) | (tlpEp << 29) | (tlpAttr << 30);
|
||
|
dmaManagement |= dmaChanEnable | (dmaTransStart << 1)
|
||
|
| (chanLatencyTimer << 8);
|
||
|
/* write DMA register, start DMA engine */
|
||
|
smi_write(port->DMA_CHAN0_ADDR_LOW, dmaMemPtrLow);
|
||
|
smi_write(port->DMA_CHAN0_ADDR_HI, dmaMemPtrHi);
|
||
|
smi_write(port->DMA_CHAN0_CONTROL, dmaCtlReg);
|
||
|
}
|
||
|
/* Setup Channel-1 */
|
||
|
if (port->_dmaInterruptCH1) {
|
||
|
totalLength = SMI_TS_DMA_BUF_SIZE;
|
||
|
mem = port->dma_addr[1];
|
||
|
dmaMemPtrLow = mem & 0xffffffff;
|
||
|
dmaMemPtrHi = mem >> 32;
|
||
|
dmaCtlReg = (totalLength) | (tlpTransUnit << 22) | (tlpTc << 25)
|
||
|
| (tlpTd << 28) | (tlpEp << 29) | (tlpAttr << 30);
|
||
|
dmaManagement |= (dmaChanEnable << 16) | (dmaTransStart << 17)
|
||
|
| (chanLatencyTimer << 24);
|
||
|
/* write DMA register, start DMA engine */
|
||
|
smi_write(port->DMA_CHAN1_ADDR_LOW, dmaMemPtrLow);
|
||
|
smi_write(port->DMA_CHAN1_ADDR_HI, dmaMemPtrHi);
|
||
|
smi_write(port->DMA_CHAN1_CONTROL, dmaCtlReg);
|
||
|
}
|
||
|
return dmaManagement;
|
||
|
}
|
||
|
|
||
|
static int smi_start_feed(struct dvb_demux_feed *dvbdmxfeed)
|
||
|
{
|
||
|
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
|
||
|
struct smi_port *port = dvbdmx->priv;
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
u32 dmaManagement;
|
||
|
|
||
|
if (port->users++ == 0) {
|
||
|
dmaManagement = smi_config_DMA(port);
|
||
|
smi_port_clearInterrupt(port);
|
||
|
smi_port_enableInterrupt(port);
|
||
|
smi_write(port->DMA_MANAGEMENT, dmaManagement);
|
||
|
tasklet_enable(&port->tasklet);
|
||
|
}
|
||
|
return port->users;
|
||
|
}
|
||
|
|
||
|
static int smi_stop_feed(struct dvb_demux_feed *dvbdmxfeed)
|
||
|
{
|
||
|
struct dvb_demux *dvbdmx = dvbdmxfeed->demux;
|
||
|
struct smi_port *port = dvbdmx->priv;
|
||
|
struct smi_dev *dev = port->dev;
|
||
|
|
||
|
if (--port->users)
|
||
|
return port->users;
|
||
|
|
||
|
tasklet_disable(&port->tasklet);
|
||
|
smi_port_disableInterrupt(port);
|
||
|
smi_clear(port->DMA_MANAGEMENT, 0x30003);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int smi_dvb_init(struct smi_port *port)
|
||
|
{
|
||
|
int ret;
|
||
|
struct dvb_adapter *adap = &port->dvb_adapter;
|
||
|
struct dvb_demux *dvbdemux = &port->demux;
|
||
|
|
||
|
dev_dbg(&port->dev->pci_dev->dev,
|
||
|
"%s, port %d\n", __func__, port->idx);
|
||
|
|
||
|
ret = dvb_register_adapter(adap, "SMI_DVB", THIS_MODULE,
|
||
|
&port->dev->pci_dev->dev,
|
||
|
adapter_nr);
|
||
|
if (ret < 0) {
|
||
|
dev_err(&port->dev->pci_dev->dev, "Fail to register DVB adapter.\n");
|
||
|
return ret;
|
||
|
}
|
||
|
ret = my_dvb_dmx_ts_card_init(dvbdemux, "SW demux",
|
||
|
smi_start_feed,
|
||
|
smi_stop_feed, port);
|
||
|
if (ret < 0)
|
||
|
goto err_del_dvb_register_adapter;
|
||
|
|
||
|
ret = my_dvb_dmxdev_ts_card_init(&port->dmxdev, &port->demux,
|
||
|
&port->hw_frontend,
|
||
|
&port->mem_frontend, adap);
|
||
|
if (ret < 0)
|
||
|
goto err_del_dvb_dmx;
|
||
|
|
||
|
ret = dvb_net_init(adap, &port->dvbnet, port->dmxdev.demux);
|
||
|
if (ret < 0)
|
||
|
goto err_del_dvb_dmxdev;
|
||
|
return 0;
|
||
|
err_del_dvb_dmxdev:
|
||
|
dvbdemux->dmx.close(&dvbdemux->dmx);
|
||
|
dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->hw_frontend);
|
||
|
dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->mem_frontend);
|
||
|
dvb_dmxdev_release(&port->dmxdev);
|
||
|
err_del_dvb_dmx:
|
||
|
dvb_dmx_release(&port->demux);
|
||
|
err_del_dvb_register_adapter:
|
||
|
dvb_unregister_adapter(&port->dvb_adapter);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void smi_dvb_exit(struct smi_port *port)
|
||
|
{
|
||
|
struct dvb_demux *dvbdemux = &port->demux;
|
||
|
|
||
|
dvb_net_release(&port->dvbnet);
|
||
|
|
||
|
dvbdemux->dmx.close(&dvbdemux->dmx);
|
||
|
dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->hw_frontend);
|
||
|
dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &port->mem_frontend);
|
||
|
dvb_dmxdev_release(&port->dmxdev);
|
||
|
dvb_dmx_release(&port->demux);
|
||
|
|
||
|
dvb_unregister_adapter(&port->dvb_adapter);
|
||
|
}
|
||
|
|
||
|
static int smi_port_attach(struct smi_dev *dev,
|
||
|
struct smi_port *port, int index)
|
||
|
{
|
||
|
int ret, dmachs;
|
||
|
|
||
|
port->dev = dev;
|
||
|
port->idx = index;
|
||
|
port->fe_type = (index == 0) ? dev->info->fe_0 : dev->info->fe_1;
|
||
|
dmachs = (index == 0) ? dev->info->ts_0 : dev->info->ts_1;
|
||
|
/* port init.*/
|
||
|
ret = smi_port_init(port, dmachs);
|
||
|
if (ret < 0)
|
||
|
return ret;
|
||
|
/* dvb init.*/
|
||
|
ret = smi_dvb_init(port);
|
||
|
if (ret < 0)
|
||
|
goto err_del_port_init;
|
||
|
/* fe init.*/
|
||
|
ret = smi_fe_init(port);
|
||
|
if (ret < 0)
|
||
|
goto err_del_dvb_init;
|
||
|
return 0;
|
||
|
err_del_dvb_init:
|
||
|
smi_dvb_exit(port);
|
||
|
err_del_port_init:
|
||
|
smi_port_exit(port);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void smi_port_detach(struct smi_port *port)
|
||
|
{
|
||
|
smi_fe_exit(port);
|
||
|
smi_dvb_exit(port);
|
||
|
smi_port_exit(port);
|
||
|
}
|
||
|
|
||
|
static int smi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
||
|
{
|
||
|
struct smi_dev *dev;
|
||
|
int ret = -ENOMEM;
|
||
|
|
||
|
if (pci_enable_device(pdev) < 0)
|
||
|
return -ENODEV;
|
||
|
|
||
|
dev = kzalloc(sizeof(struct smi_dev), GFP_KERNEL);
|
||
|
if (!dev) {
|
||
|
ret = -ENOMEM;
|
||
|
goto err_pci_disable_device;
|
||
|
}
|
||
|
|
||
|
dev->pci_dev = pdev;
|
||
|
pci_set_drvdata(pdev, dev);
|
||
|
dev->info = (struct smi_cfg_info *) id->driver_data;
|
||
|
dev_info(&dev->pci_dev->dev,
|
||
|
"card detected: %s\n", dev->info->name);
|
||
|
|
||
|
dev->nr = dev->info->type;
|
||
|
dev->lmmio = ioremap(pci_resource_start(dev->pci_dev, 0),
|
||
|
pci_resource_len(dev->pci_dev, 0));
|
||
|
if (!dev->lmmio) {
|
||
|
ret = -ENOMEM;
|
||
|
goto err_kfree;
|
||
|
}
|
||
|
|
||
|
/* should we set to 32bit DMA? */
|
||
|
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
|
||
|
if (ret < 0)
|
||
|
goto err_pci_iounmap;
|
||
|
|
||
|
pci_set_master(pdev);
|
||
|
|
||
|
ret = smi_hw_init(dev);
|
||
|
if (ret < 0)
|
||
|
goto err_pci_iounmap;
|
||
|
|
||
|
ret = smi_i2c_init(dev);
|
||
|
if (ret < 0)
|
||
|
goto err_pci_iounmap;
|
||
|
|
||
|
if (dev->info->ts_0) {
|
||
|
ret = smi_port_attach(dev, &dev->ts_port[0], 0);
|
||
|
if (ret < 0)
|
||
|
goto err_del_i2c_adaptor;
|
||
|
}
|
||
|
|
||
|
if (dev->info->ts_1) {
|
||
|
ret = smi_port_attach(dev, &dev->ts_port[1], 1);
|
||
|
if (ret < 0)
|
||
|
goto err_del_port0_attach;
|
||
|
}
|
||
|
|
||
|
ret = smi_ir_init(dev);
|
||
|
if (ret < 0)
|
||
|
goto err_del_port1_attach;
|
||
|
|
||
|
#ifdef CONFIG_PCI_MSI /* to do msi interrupt.???*/
|
||
|
if (pci_msi_enabled())
|
||
|
ret = pci_enable_msi(dev->pci_dev);
|
||
|
if (ret)
|
||
|
dev_info(&dev->pci_dev->dev, "MSI not available.\n");
|
||
|
#endif
|
||
|
|
||
|
ret = request_irq(dev->pci_dev->irq, smi_irq_handler,
|
||
|
IRQF_SHARED, "SMI_PCIE", dev);
|
||
|
if (ret < 0)
|
||
|
goto err_del_ir;
|
||
|
|
||
|
smi_ir_start(&dev->ir);
|
||
|
return 0;
|
||
|
|
||
|
err_del_ir:
|
||
|
smi_ir_exit(dev);
|
||
|
err_del_port1_attach:
|
||
|
if (dev->info->ts_1)
|
||
|
smi_port_detach(&dev->ts_port[1]);
|
||
|
err_del_port0_attach:
|
||
|
if (dev->info->ts_0)
|
||
|
smi_port_detach(&dev->ts_port[0]);
|
||
|
err_del_i2c_adaptor:
|
||
|
smi_i2c_exit(dev);
|
||
|
err_pci_iounmap:
|
||
|
iounmap(dev->lmmio);
|
||
|
err_kfree:
|
||
|
pci_set_drvdata(pdev, NULL);
|
||
|
kfree(dev);
|
||
|
err_pci_disable_device:
|
||
|
pci_disable_device(pdev);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static void smi_remove(struct pci_dev *pdev)
|
||
|
{
|
||
|
struct smi_dev *dev = pci_get_drvdata(pdev);
|
||
|
|
||
|
smi_write(MSI_INT_ENA_CLR, ALL_INT);
|
||
|
free_irq(dev->pci_dev->irq, dev);
|
||
|
#ifdef CONFIG_PCI_MSI
|
||
|
pci_disable_msi(dev->pci_dev);
|
||
|
#endif
|
||
|
if (dev->info->ts_1)
|
||
|
smi_port_detach(&dev->ts_port[1]);
|
||
|
if (dev->info->ts_0)
|
||
|
smi_port_detach(&dev->ts_port[0]);
|
||
|
|
||
|
smi_ir_exit(dev);
|
||
|
smi_i2c_exit(dev);
|
||
|
iounmap(dev->lmmio);
|
||
|
pci_set_drvdata(pdev, NULL);
|
||
|
pci_disable_device(pdev);
|
||
|
kfree(dev);
|
||
|
}
|
||
|
|
||
|
/* DVBSky cards */
|
||
|
static const struct smi_cfg_info dvbsky_s950_cfg = {
|
||
|
.type = SMI_DVBSKY_S950,
|
||
|
.name = "DVBSky S950 V3",
|
||
|
.ts_0 = SMI_TS_NULL,
|
||
|
.ts_1 = SMI_TS_DMA_BOTH,
|
||
|
.fe_0 = DVBSKY_FE_NULL,
|
||
|
.fe_1 = DVBSKY_FE_M88DS3103,
|
||
|
.rc_map = RC_MAP_DVBSKY,
|
||
|
};
|
||
|
|
||
|
static const struct smi_cfg_info dvbsky_s952_cfg = {
|
||
|
.type = SMI_DVBSKY_S952,
|
||
|
.name = "DVBSky S952 V3",
|
||
|
.ts_0 = SMI_TS_DMA_BOTH,
|
||
|
.ts_1 = SMI_TS_DMA_BOTH,
|
||
|
.fe_0 = DVBSKY_FE_M88RS6000,
|
||
|
.fe_1 = DVBSKY_FE_M88RS6000,
|
||
|
.rc_map = RC_MAP_DVBSKY,
|
||
|
};
|
||
|
|
||
|
static const struct smi_cfg_info dvbsky_t9580_cfg = {
|
||
|
.type = SMI_DVBSKY_T9580,
|
||
|
.name = "DVBSky T9580 V3",
|
||
|
.ts_0 = SMI_TS_DMA_BOTH,
|
||
|
.ts_1 = SMI_TS_DMA_BOTH,
|
||
|
.fe_0 = DVBSKY_FE_SIT2,
|
||
|
.fe_1 = DVBSKY_FE_M88DS3103,
|
||
|
.rc_map = RC_MAP_DVBSKY,
|
||
|
};
|
||
|
|
||
|
static const struct smi_cfg_info technotrend_s2_4200_cfg = {
|
||
|
.type = SMI_TECHNOTREND_S2_4200,
|
||
|
.name = "TechnoTrend TT-budget S2-4200 Twin",
|
||
|
.ts_0 = SMI_TS_DMA_BOTH,
|
||
|
.ts_1 = SMI_TS_DMA_BOTH,
|
||
|
.fe_0 = DVBSKY_FE_M88RS6000,
|
||
|
.fe_1 = DVBSKY_FE_M88RS6000,
|
||
|
.rc_map = RC_MAP_TT_1500,
|
||
|
};
|
||
|
|
||
|
/* PCI IDs */
|
||
|
#define SMI_ID(_subvend, _subdev, _driverdata) { \
|
||
|
.vendor = SMI_VID, .device = SMI_PID, \
|
||
|
.subvendor = _subvend, .subdevice = _subdev, \
|
||
|
.driver_data = (unsigned long)&_driverdata }
|
||
|
|
||
|
static const struct pci_device_id smi_id_table[] = {
|
||
|
SMI_ID(0x4254, 0x0550, dvbsky_s950_cfg),
|
||
|
SMI_ID(0x4254, 0x0552, dvbsky_s952_cfg),
|
||
|
SMI_ID(0x4254, 0x5580, dvbsky_t9580_cfg),
|
||
|
SMI_ID(0x13c2, 0x3016, technotrend_s2_4200_cfg),
|
||
|
{0}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(pci, smi_id_table);
|
||
|
|
||
|
static struct pci_driver smipcie_driver = {
|
||
|
.name = "SMI PCIe driver",
|
||
|
.id_table = smi_id_table,
|
||
|
.probe = smi_probe,
|
||
|
.remove = smi_remove,
|
||
|
};
|
||
|
|
||
|
module_pci_driver(smipcie_driver);
|
||
|
|
||
|
MODULE_AUTHOR("Max nibble <nibble.max@gmail.com>");
|
||
|
MODULE_DESCRIPTION("SMI PCIe driver");
|
||
|
MODULE_LICENSE("GPL");
|