kernel_samsung_a34x-permissive/drivers/misc/mediatek/usb20/musbhsdma.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2018 MediaTek Inc.
 */

#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/export.h>
/* #include <asm/system.h> */
#include "musb_core.h"
#include "musbhsdma.h"
#ifdef CONFIG_OF
/* extern void __iomem	*USB_BASE; */
#endif

#ifdef CONFIG_MTK_MUSB_DRV_36BIT

#define USB_DMACNTL_ADDR36_EN (1 << 14)
#define USB_DMACNT_COUNT_MASK (0xffffff)
#define USB_DMACNT_HADDR_OFFSET (24)
#define USB_DMACNT_HADDR_MASK (0xf)
static u32 dma_extract_count(u32 count)
{
	return (count & USB_DMACNT_COUNT_MASK);
}

static dma_addr_t dma_append_high_addr(
		dma_addr_t addr,
		void __iomem *mbase,
		u8 bchannel)
{
	u64 hbit;

	hbit = musb_read_hsdma_count(mbase, bchannel);
	hbit = hbit >> USB_DMACNT_HADDR_OFFSET;
	addr = addr | (hbit << 32);
	return addr;
}
#endif

static int dma_controller_start(struct dma_controller *c)
{
	/* nothing to do */
	return 0;
}

static void dma_channel_release(struct dma_channel *channel);

static int dma_controller_stop(struct dma_controller *c)
{
	struct musb_dma_controller *controller = container_of(c,
			      struct musb_dma_controller, controller);
	struct musb *musb = controller->private_data;
	struct dma_channel *channel;
	u8 bit;

	if (controller->used_channels != 0) {
		dev_notice(musb->controller, "Stopping DMA controller while channel active\n");

		for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
			if (controller->used_channels & (1 << bit)) {
				channel = &controller->channel[bit].channel;
				dma_channel_release(channel);

				if (!controller->used_channels)
					break;
			}
		}
	}

	return 0;
}

static struct dma_channel *dma_channel_allocate(struct dma_controller *c,
					struct musb_hw_ep *hw_ep, u8 transmit)
{
	struct musb_dma_controller *controller = container_of(c,
			struct musb_dma_controller,	controller);
	struct musb *musb = controller->private_data;
	struct musb_dma_channel *musb_channel = NULL;
	struct dma_channel *channel = NULL;
	u8 bit;

#ifdef CONFIG_MTK_MUSB_QMU_SUPPORT
	/* reserve dma channel 0 for QMU */
	for (bit = 1; bit < MUSB_HSDMA_CHANNELS; bit++) {
#else
	for (bit = 0; bit < MUSB_HSDMA_CHANNELS; bit++) {
#endif
		if (!(controller->used_channels & (1 << bit))) {
			controller->used_channels |= (1 << bit);
			musb_channel = &(controller->channel[bit]);
			musb_channel->controller = controller;
			musb_channel->idx = bit;
			if (musb->is_host) {
				musb_channel->epnum = hw_ep->epnum;
			} else {
				if (transmit) {
				/* dma irq will use
				 * this member to get the hw ep.
				 */
					musb_channel->epnum =
						hw_ep->ep_in.current_epnum;
				} else
				/* after mapping,
				 * hw ep num eques to the current num
				 */
					musb_channel->epnum =
						hw_ep->ep_out.current_epnum;
			}
			musb_channel->transmit = transmit;
			channel = &(musb_channel->channel);
			channel->private_data = musb_channel;
			channel->status = MUSB_DMA_STATUS_FREE;
			channel->max_len = 0x100000;
			/* Tx => mode 1; Rx => mode 0 */
			channel->desired_mode = transmit;
			channel->actual_len = 0;
			break;
		}
	}

	return channel;
}

static void dma_channel_release(struct dma_channel *channel)
{
	struct musb_dma_channel *musb_channel = channel->private_data;
	u8 bchannel = musb_channel->idx;
	void __iomem *mbase = musb_channel->controller->base;

	musb_writew(mbase, MUSB_HSDMA_CHANNEL_OFFSET(bchannel,
	    MUSB_HSDMA_CONTROL), 0);

	channel->actual_len = 0;
	musb_channel->start_addr = 0;
	musb_channel->len = 0;

	musb_channel->controller->used_channels &= ~(1 << musb_channel->idx);

	channel->status = MUSB_DMA_STATUS_UNKNOWN;
}

static void configure_channel(struct dma_channel *channel,
			u16 packet_sz, u8 mode, dma_addr_t dma_addr, u32 len)
{
	struct musb_dma_channel *musb_channel = channel->private_data;
	struct musb_dma_controller *controller = musb_channel->controller;
	void __iomem *mbase = controller->base;
	u8 bchannel = musb_channel->idx;
	u16 csr = 0;

	DBG(4, "%p, pkt_sz %d, addr 0x%x, len %d, mode %d\n",
	    channel, packet_sz, (unsigned int)dma_addr, len, mode);

	if (mode) {
		csr |= 1 << MUSB_HSDMA_MODE1_SHIFT;
		if (len < packet_sz) {
			DBG(0, "%s:%d Error Here\n", __func__, __LINE__);
			return;
		}
	}
	csr |= MUSB_HSDMA_BURSTMODE_INCR16 << MUSB_HSDMA_BURSTMODE_SHIFT;

	csr |= (musb_channel->epnum << MUSB_HSDMA_ENDPOINT_SHIFT)
	    | (1 << MUSB_HSDMA_ENABLE_SHIFT)
	    | (1 << MUSB_HSDMA_IRQENABLE_SHIFT)
	    | (musb_channel->transmit ? (1 << MUSB_HSDMA_TRANSMIT_SHIFT)
	       : 0);

#ifdef CONFIG_MTK_MUSB_DRV_36BIT
	{
		u32 val;

		/* enable 36-bit support */
		csr |= USB_DMACNTL_ADDR36_EN;

		/* low address */
		musb_write_hsdma_addr(mbase, bchannel, dma_addr & 0xFFFFFFFF);

		/* count */
		val = len & USB_DMACNT_COUNT_MASK;
		/* high address */
		val |= (((dma_addr >> 32) & USB_DMACNT_HADDR_MASK)
			<< USB_DMACNT_HADDR_OFFSET);
		musb_write_hsdma_count(mbase, bchannel, val);
	}
#else
	/* address/count */
	musb_write_hsdma_addr(mbase, bchannel, dma_addr);
	musb_write_hsdma_count(mbase, bchannel, len);
#endif

	/* control (this should start things) */
	musb_writew(mbase,
		MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL), csr);
	DBG(5, "MUSB:DMA channel %d control reg is %x\n",
		bchannel, musb_readw(mbase,
		MUSB_HSDMA_CHANNEL_OFFSET(bchannel,	MUSB_HSDMA_CONTROL)));
}

static int dma_channel_program(struct dma_channel *channel,
			u16 packet_sz, u8 mode, dma_addr_t dma_addr, u32 len)
{
	struct musb_dma_channel *musb_channel = channel->private_data;
	struct musb_dma_controller *controller = musb_channel->controller;
	struct musb *musb = controller->private_data;

	DBG(2, "ep%d-%s pkt_sz %d, dma_addr 0x%x length %d, mode %d\n",
	    musb_channel->epnum,
	    musb_channel->transmit ?
	    "Tx" : "Rx", packet_sz, (unsigned int)dma_addr, len, mode);

	if (channel->status == MUSB_DMA_STATUS_UNKNOWN ||
	       channel->status == MUSB_DMA_STATUS_BUSY) {
		DBG(0, "%s:%d Error Here\n", __func__, __LINE__);
		return -1;
	}
	/* Let targets check/tweak the arguments */
	if (musb->ops->adjust_channel_params) {
		int ret = musb->ops->adjust_channel_params(channel,
				   packet_sz, &mode, &dma_addr, &len);
		if (ret)
			return ret;
	}
#ifdef NEVER
	/*
	 * The DMA engine in RTL1.8 and above cannot handle
	 * DMA addresses that are not aligned to a 4 byte boundary.
	 * It ends up masking the last two bits of the address
	 * programmed in DMA_ADDR.
	 *
	 * Fail such DMA transfers, so that the backup PIO mode
	 * can carry out the transfer
	 */
	if ((musb->hwvers >= MUSB_HWVERS_1800) && (dma_addr % 4))
		return false;
#endif
	channel->actual_len = 0;
	musb_channel->start_addr = dma_addr;
	musb_channel->len = len;
	musb_channel->max_packet_sz = packet_sz;
	channel->status = MUSB_DMA_STATUS_BUSY;

	configure_channel(channel, packet_sz, mode, dma_addr, len);

	return true;
}

static int dma_channel_abort(struct dma_channel *channel)
{
	struct musb_dma_channel *musb_channel = channel->private_data;
	void __iomem *mbase = musb_channel->controller->base;

	u8 bchannel = musb_channel->idx;
	int offset;
	u16 csr;

	if (channel->status == MUSB_DMA_STATUS_BUSY) {
		if (musb_channel->transmit) {
			offset =
				MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR);

			/*
			 * The programming guide says that we must clear
			 * the DMAENAB bit before the DMAMODE bit...
			 */
			csr = musb_readw(mbase, offset);
			csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
			musb_writew(mbase, offset, csr);
			csr &= ~MUSB_TXCSR_DMAMODE;
			musb_writew(mbase, offset, csr);
		} else {
			offset = MUSB_EP_OFFSET
					(musb_channel->epnum, MUSB_RXCSR);

			csr = musb_readw(mbase, offset);
			csr &= ~(MUSB_RXCSR_AUTOCLEAR |
					MUSB_RXCSR_DMAENAB |
					MUSB_RXCSR_DMAMODE);
			musb_writew(mbase, offset, csr);
		}

		musb_writew(mbase,
			MUSB_HSDMA_CHANNEL_OFFSET(bchannel,
				MUSB_HSDMA_CONTROL), 0);
		musb_write_hsdma_addr(mbase, bchannel, 0);
		musb_write_hsdma_count(mbase, bchannel, 0);
		channel->status = MUSB_DMA_STATUS_FREE;
	}

	return 0;
}

static int dma_channel_pause(struct dma_channel *channel)
{
	/*
	 * Probably nothing to be done here. This is needed
	 * only for certain DMA controllers which require
	 * the DMA channel to be paused to get correct DMA
	 * transfer residue
	 */
	return 0;
}

static int dma_channel_resume(struct dma_channel *channel)
{
	/* Probably nothing to be done here */
	return 0;
}

static int dma_channel_tx_status(struct dma_channel *channel)
{
	struct musb_dma_channel *musb_channel = channel->private_data;
	void __iomem *mbase = musb_channel->controller->base;

	u8 bchannel = musb_channel->idx;
	u32 count, residue;
	dma_addr_t addr;

	/*
	 * Get the number of bytes left to be transferred over
	 * DMA
	 * The MUSB spec mentions "The DMA controller ADDR register
	 * will have been incremented as packets were unloaded from
	 * the fifo, the processor can determine the size of the
	 * transfer by comparing the current value of ADDR against
	 * the start address of the memory buffer
	 */
	/* residue = musb_read_hsdma_count(mbase, bchannel); */
	addr = musb_read_hsdma_addr(mbase, bchannel);
#ifdef CONFIG_MTK_MUSB_DRV_36BIT
	addr = dma_append_high_addr(addr, mbase, bchannel);
#endif
	count = addr - musb_channel->start_addr;
	residue = channel->prog_len - count;

	return residue;
}

static int dma_channel_check_residue(struct dma_channel *channel, u32 residue)
{
	int status;

	/* In cases where we know the transfer length and were expecting
	 * a DMA completion we could get into the DMA busy condition
	 * here if the next packet is short and the EP interrupt occurs
	 * before we receive dma_completion interrupt for current transfer
	 * Wait for dma_completion. MUSB will interrupt us again for this
	 * short packet when we clear the DMA bits
	 */
	if (!residue) {
		/* Wait for DMA completion */
		status = -EINPROGRESS;
	} else if (residue == channel->prog_len) {
		/* Nothing transferred over DMA? */
		/* WARN_ON(1); */
		status = -EINVAL;
	} else {
		/* residue looks OK */
		status = 0;
	}
	return status;
}


irqreturn_t dma_controller_irq(int irq, void *private_data)
{
	struct musb_dma_controller *controller = private_data;
	struct musb *musb = controller->private_data;
	struct musb_dma_channel *musb_channel;
	struct dma_channel *channel;

	void __iomem *mbase = controller->base;

	irqreturn_t retval = IRQ_NONE;

	unsigned long flags;

	u8 bchannel;
	u8 int_hsdma;

	u32 count;
	u16 csr;
	dma_addr_t addr;

	spin_lock_irqsave(&musb->lock, flags);

	/* musb_read_clear_dma_interrupt */
	int_hsdma = musb_readb(musb->mregs, MUSB_HSDMA_INTR);
	/* make sure int_hsdma up to date before W1C */
	mb();
	musb_writeb(musb->mregs, MUSB_HSDMA_INTR, int_hsdma);
	/* musb_read_clear_dma_interrupt */

	if (!int_hsdma) {
		DBG(2, "spurious DMA irq\n");

		for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
			musb_channel = (struct musb_dma_channel *)
			    &(controller->channel[bchannel]);
			channel = &musb_channel->channel;
			if (channel->status == MUSB_DMA_STATUS_BUSY) {
				count = musb_read_hsdma_count(mbase, bchannel);
#ifdef CONFIG_MTK_MUSB_DRV_36BIT
				count = dma_extract_count(count);
#endif

				if (count == 0)
					int_hsdma |= (1 << bchannel);
			}
		}

		DBG(2, "int_hsdma = 0x%x\n", int_hsdma);

		if (!int_hsdma)
			goto done;
	}

	for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
		if (int_hsdma & (1 << bchannel)) {
			musb_channel = (struct musb_dma_channel *)
			    &(controller->channel[bchannel]);
			channel = &musb_channel->channel;
			DBG(1, "MUSB:DMA channel %d interrupt\n", bchannel);

			csr = musb_readw(mbase,
				MUSB_HSDMA_CHANNEL_OFFSET
					(bchannel, MUSB_HSDMA_CONTROL));

			if (csr & (1 << MUSB_HSDMA_BUSERROR_SHIFT)) {
				musb_channel->channel.status
					= MUSB_DMA_STATUS_BUS_ABORT;
			} else {
				u8 devctl;

				addr = musb_read_hsdma_addr(mbase, bchannel);
#ifdef CONFIG_MTK_MUSB_DRV_36BIT
				addr =
					dma_append_high_addr
						(addr, mbase, bchannel);
#endif
				channel->actual_len = addr
					- musb_channel->start_addr;
#ifdef NEVER
				channel->actual_len =
				musb_readl(mbase, USB_DMA_REALCOUNT(bchannel));
#endif

				DBG(2,
					"[MUSB] channel %d ch %p, 0x%p -> 0x%p (%zu / %d) %s\n",
					bchannel,
				    channel,
					(void *)(uintptr_t)
					musb_channel->start_addr,
				    (void *)(uintptr_t)
				    addr, channel->actual_len,
				    musb_channel->len,
				    (channel->actual_len
				     < musb_channel->len)
				     ? "=> reconfig 0" : "=> complete");

				devctl = musb_readb(mbase, MUSB_DEVCTL);

				channel->status = MUSB_DMA_STATUS_FREE;

				/* completed */
				if ((devctl & MUSB_DEVCTL_HM)
				    && (musb_channel->transmit)
				    && ((channel->desired_mode == 0)
					|| (channel->actual_len &
					    (musb_channel->max_packet_sz - 1)))
				    ) {
					u8 epnum = musb_channel->epnum;
					int offset = MUSB_EP_OFFSET(epnum,
								    MUSB_TXCSR);
					u16 txcsr;

					host_tx_refcnt_inc(epnum);

					/*
					 * The programming guide says that we
					 * must clear DMAENAB before DMAMODE.
					 */
					musb_ep_select(mbase, epnum);
					txcsr = musb_readw(mbase, offset);
					txcsr &=
					~(MUSB_TXCSR_DMAENAB
					| MUSB_TXCSR_AUTOSET);
					musb_writew(mbase, offset, txcsr);
					/* Send out the packet */
					txcsr &= ~MUSB_TXCSR_DMAMODE;
					txcsr |= MUSB_TXCSR_TXPKTRDY;
					musb_writew(mbase, offset, txcsr);

					if (musb_host_db_workaround2
							&& musb->is_host)
						wait_tx_done(epnum, 2000000000);
				} else
					musb_dma_completion(musb,
						musb_channel->epnum,
						musb_channel->transmit);
			}
		}
	}
	DBG(4, "MUSB: DMA interrupt completino on ep\n");

	retval = IRQ_HANDLED;
done:
	spin_unlock_irqrestore(&musb->lock, flags);
	return retval;
}

void dma_controller_destroy(struct dma_controller *c)
{
	struct musb_dma_controller *controller = container_of(c,
					struct musb_dma_controller, controller);

	if (!controller)
		return;

	if (controller->irq)
		free_irq(controller->irq, c);

	kfree(controller);
}

struct dma_controller *dma_controller_create
				(struct musb *musb, void __iomem *base)
{
	struct musb_dma_controller *controller;
	int irq = musb->dma_irq;

	if ((irq <= 0) && (irq != SHARE_IRQ)) {
		DBG(0, "[MUSB] No DMA interrupt line!\n");
		return NULL;
	}

	controller = kzalloc(sizeof(*controller), GFP_KERNEL);
	if (!controller)
		return NULL;

	controller->channel_count = MUSB_HSDMA_CHANNELS;
	controller->private_data = musb;
	controller->base = base;

	controller->controller.start = dma_controller_start;
	controller->controller.stop = dma_controller_stop;
	controller->controller.channel_alloc = dma_channel_allocate;
	controller->controller.channel_release = dma_channel_release;
	controller->controller.channel_program = dma_channel_program;
	controller->controller.channel_abort = dma_channel_abort;
	controller->controller.channel_pause = dma_channel_pause;
	controller->controller.channel_resume = dma_channel_resume;
	controller->controller.tx_status = dma_channel_tx_status;
	controller->controller.check_residue = dma_channel_check_residue;

	if (irq != SHARE_IRQ) {
		if (request_irq(irq, dma_controller_irq, 0,
			dev_name(musb->controller), &controller->controller)) {
			DBG(0, "request_irq %d failed!\n", irq);
			dma_controller_destroy(&controller->controller);

			return NULL;
		}
	}

	controller->irq = irq;

	return &controller->controller;
}

#define MUSB_HSDMA_REAL_COUNT 0x80

#define USB_HSDMA_CHANNEL_OFFSET(_bchannel, _offset)		\
		(MUSB_HSDMA_BASE + (_bchannel << 4) + _offset)

#define usb_read_hsdma_addr(mbase, bchannel)	\
	musb_readl(mbase,	\
		   USB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_ADDRESS))

#define usb_read_hsdma_ctrl(mbase, bchannel)	\
	musb_readb(mbase,	\
		   MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_CONTROL))

#define usb_read_hsdma_count(mbase, bchannel)	\
	musb_readl(mbase,	\
		   MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_COUNT))

#define usb_read_hsdma_real_count(mbase, bchannel)	\
	musb_readl(mbase,	\
		   MUSB_HSDMA_CHANNEL_OFFSET(bchannel, MUSB_HSDMA_REAL_COUNT))

u8 USB_DMA_status(u8 *pbDMAen, u8 *pbDMAdir)
{
	u8 bchannel;
	u8 bDMAen = 0;
	u8 bDMAdir = 0;

#ifdef CONFIG_OF
	for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
		bDMAen |=
		(usb_read_hsdma_ctrl(mtk_musb->mregs, bchannel) & 0x01)
			<< bchannel;
		bDMAdir |=
		((usb_read_hsdma_ctrl(mtk_musb->mregs, bchannel) & 0x02) >> 1)
		    << bchannel;
	}
#else
	void __iomem *base = USB_BASE;

	for (bchannel = 0; bchannel < MUSB_HSDMA_CHANNELS; bchannel++) {
		bDMAen |= (usb_read_hsdma_ctrl(base, bchannel) & 0x01)
		<< bchannel;
		bDMAdir |= ((usb_read_hsdma_ctrl(base, bchannel) & 0x02) >> 1)
		<< bchannel;
	}
#endif
	if (pbDMAen)
		*pbDMAen = bDMAen;
	if (pbDMAdir)
		*pbDMAdir = bDMAdir;
	if (bDMAen > 0)
		return 1;
	else
		return 0;
}
EXPORT_SYMBOL(USB_DMA_status);


u32 USB_DMA_address(u32 *len, u8 bchannel)
{
#ifdef CONFIG_OF
	/* void __iomem *base = USB_BASE; */
	if (len) {
		*len =
		    usb_read_hsdma_count(mtk_musb->mregs,
					 bchannel) + usb_read_hsdma_real_count
					 (mtk_musb->mregs, bchannel);
	}
	return (usb_read_hsdma_addr(mtk_musb->mregs, bchannel) -
		usb_read_hsdma_real_count(mtk_musb->mregs, bchannel));
#else
	void __iomem *base = (void *)USB_BASE;

	if (len) {
		*len =
		    usb_read_hsdma_count(base, bchannel) +
				usb_read_hsdma_real_count(base,	bchannel);
	}
	return usb_read_hsdma_addr(base, bchannel) -
		usb_read_hsdma_real_count(base,	bchannel);
#endif
}
EXPORT_SYMBOL(USB_DMA_address);