kernel_samsung_a34x-permissive/sound/soc/samsung/smartq_wm8987.c

230 lines
5.5 KiB
C
Raw Normal View History

/* sound/soc/samsung/smartq_wm8987.c
*
* Copyright 2010 Maurus Cuelenaere <mcuelenaere@gmail.com>
*
* Based on smdk6410_wm8987.c
* Copyright 2007 Wolfson Microelectronics PLC. - linux@wolfsonmicro.com
* Graeme Gregory - graeme.gregory@wolfsonmicro.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include "i2s.h"
#include "../codecs/wm8750.h"
/*
* WM8987 is register compatible with WM8750, so using that as base driver.
*/
static struct snd_soc_card snd_soc_smartq;
static int smartq_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
unsigned int clk = 0;
int ret;
switch (params_rate(params)) {
case 8000:
case 16000:
case 32000:
case 48000:
case 96000:
clk = 12288000;
break;
case 11025:
case 22050:
case 44100:
case 88200:
clk = 11289600;
break;
}
/* Use PCLK for I2S signal generation */
ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_RCLKSRC_0,
0, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* Gate the RCLK output on PAD */
ret = snd_soc_dai_set_sysclk(cpu_dai, SAMSUNG_I2S_CDCLK,
0, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* set the codec system clock for DAC and ADC */
ret = snd_soc_dai_set_sysclk(codec_dai, WM8750_SYSCLK, clk,
SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
return 0;
}
/*
* SmartQ WM8987 HiFi DAI operations.
*/
static struct snd_soc_ops smartq_hifi_ops = {
.hw_params = smartq_hifi_hw_params,
};
static struct snd_soc_jack smartq_jack;
static struct snd_soc_jack_pin smartq_jack_pins[] = {
/* Disable speaker when headphone is plugged in */
{
.pin = "Internal Speaker",
.mask = SND_JACK_HEADPHONE,
},
};
static struct snd_soc_jack_gpio smartq_jack_gpios[] = {
{
.gpio = -1,
.name = "headphone detect",
.report = SND_JACK_HEADPHONE,
.debounce_time = 200,
},
};
static const struct snd_kcontrol_new wm8987_smartq_controls[] = {
SOC_DAPM_PIN_SWITCH("Internal Speaker"),
SOC_DAPM_PIN_SWITCH("Headphone Jack"),
SOC_DAPM_PIN_SWITCH("Internal Mic"),
};
static int smartq_speaker_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k,
int event)
{
struct gpio_desc *gpio = snd_soc_card_get_drvdata(&snd_soc_smartq);
gpiod_set_value(gpio, SND_SOC_DAPM_EVENT_OFF(event));
return 0;
}
static const struct snd_soc_dapm_widget wm8987_dapm_widgets[] = {
SND_SOC_DAPM_SPK("Internal Speaker", smartq_speaker_event),
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_MIC("Internal Mic", NULL),
};
static const struct snd_soc_dapm_route audio_map[] = {
{"Headphone Jack", NULL, "LOUT2"},
{"Headphone Jack", NULL, "ROUT2"},
{"Internal Speaker", NULL, "LOUT2"},
{"Internal Speaker", NULL, "ROUT2"},
{"Mic Bias", NULL, "Internal Mic"},
{"LINPUT2", NULL, "Mic Bias"},
};
static int smartq_wm8987_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_dapm_context *dapm = &rtd->card->dapm;
int err = 0;
/* set endpoints to not connected */
snd_soc_dapm_nc_pin(dapm, "LINPUT1");
snd_soc_dapm_nc_pin(dapm, "RINPUT1");
snd_soc_dapm_nc_pin(dapm, "OUT3");
snd_soc_dapm_nc_pin(dapm, "ROUT1");
/* Headphone jack detection */
err = snd_soc_card_jack_new(rtd->card, "Headphone Jack",
SND_JACK_HEADPHONE, &smartq_jack,
smartq_jack_pins,
ARRAY_SIZE(smartq_jack_pins));
if (err)
return err;
err = snd_soc_jack_add_gpios(&smartq_jack,
ARRAY_SIZE(smartq_jack_gpios),
smartq_jack_gpios);
return err;
}
static struct snd_soc_dai_link smartq_dai[] = {
{
.name = "wm8987",
.stream_name = "SmartQ Hi-Fi",
.cpu_dai_name = "samsung-i2s.0",
.codec_dai_name = "wm8750-hifi",
.platform_name = "samsung-i2s.0",
.codec_name = "wm8750.0-0x1a",
.init = smartq_wm8987_init,
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ops = &smartq_hifi_ops,
},
};
static struct snd_soc_card snd_soc_smartq = {
.name = "SmartQ",
.owner = THIS_MODULE,
.dai_link = smartq_dai,
.num_links = ARRAY_SIZE(smartq_dai),
.dapm_widgets = wm8987_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8987_dapm_widgets),
.dapm_routes = audio_map,
.num_dapm_routes = ARRAY_SIZE(audio_map),
.controls = wm8987_smartq_controls,
.num_controls = ARRAY_SIZE(wm8987_smartq_controls),
};
static int smartq_probe(struct platform_device *pdev)
{
struct gpio_desc *gpio;
int ret;
platform_set_drvdata(pdev, &snd_soc_smartq);
/* Initialise GPIOs used by amplifiers */
gpio = devm_gpiod_get(&pdev->dev, "amplifiers shutdown",
GPIOD_OUT_HIGH);
if (IS_ERR(gpio)) {
dev_err(&pdev->dev, "Failed to register GPK12\n");
ret = PTR_ERR(gpio);
goto out;
}
snd_soc_card_set_drvdata(&snd_soc_smartq, gpio);
ret = devm_snd_soc_register_card(&pdev->dev, &snd_soc_smartq);
if (ret)
dev_err(&pdev->dev, "Failed to register card\n");
out:
return ret;
}
static struct platform_driver smartq_driver = {
.driver = {
.name = "smartq-audio",
},
.probe = smartq_probe,
};
module_platform_driver(smartq_driver);
/* Module information */
MODULE_AUTHOR("Maurus Cuelenaere <mcuelenaere@gmail.com>");
MODULE_DESCRIPTION("ALSA SoC SmartQ WM8987");
MODULE_LICENSE("GPL");