1375 lines
42 KiB
Plaintext
1375 lines
42 KiB
Plaintext
|
#
|
||
|
|
# Sensor device configuration
|
||
|
|
#
|
||
|
|
|
||
|
|
menu "I2C Hardware Bus support"
|
||
|
|
depends on HAS_IOMEM
|
||
|
|
|
||
|
|
comment "PC SMBus host controller drivers"
|
||
|
|
depends on PCI
|
||
|
|
|
||
|
|
config I2C_ALI1535
|
||
|
|
tristate "ALI 1535"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the SMB
|
||
|
|
Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB
|
||
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
||
|
|
Power Management Unit (PMU).
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-ali1535.
|
||
|
|
|
||
|
|
config I2C_ALI1563
|
||
|
|
tristate "ALI 1563"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the SMB
|
||
|
|
Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB
|
||
|
|
controller is part of the 7101 device, which is an ACPI-compliant
|
||
|
|
Power Management Unit (PMU).
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-ali1563.
|
||
|
|
|
||
|
|
config I2C_ALI15X3
|
||
|
|
tristate "ALI 15x3"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-ali15x3.
|
||
|
|
|
||
|
|
config I2C_AMD756
|
||
|
|
tristate "AMD 756/766/768/8111 and nVidia nForce"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the AMD
|
||
|
|
756/766/768 mainboard I2C interfaces. The driver also includes
|
||
|
|
support for the first (SMBus 1.0) I2C interface of the AMD 8111 and
|
||
|
|
the nVidia nForce I2C interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-amd756.
|
||
|
|
|
||
|
|
config I2C_AMD756_S4882
|
||
|
|
tristate "SMBus multiplexing on the Tyan S4882"
|
||
|
|
depends on I2C_AMD756 && X86
|
||
|
|
help
|
||
|
|
Enabling this option will add specific SMBus support for the Tyan
|
||
|
|
S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed
|
||
|
|
over 8 different channels, where the various memory module EEPROMs
|
||
|
|
and temperature sensors live. Saying yes here will give you access
|
||
|
|
to these in addition to the trunk.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-amd756-s4882.
|
||
|
|
|
||
|
|
config I2C_AMD8111
|
||
|
|
tristate "AMD 8111"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
second (SMBus 2.0) AMD 8111 mainboard I2C interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-amd8111.
|
||
|
|
|
||
|
|
config I2C_HIX5HD2
|
||
|
|
tristate "Hix5hd2 high-speed I2C driver"
|
||
|
|
depends on ARCH_HISI || ARCH_HIX5HD2 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Say Y here to include support for the high-speed I2C controller
|
||
|
|
used in HiSilicon hix5hd2 SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-hix5hd2.
|
||
|
|
|
||
|
|
config I2C_I801
|
||
|
|
tristate "Intel 82801 (ICH/PCH)"
|
||
|
|
depends on PCI
|
||
|
|
select CHECK_SIGNATURE if X86 && DMI
|
||
|
|
select I2C_SMBUS
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the Intel
|
||
|
|
801 family of mainboard I2C interfaces. Specifically, the following
|
||
|
|
versions of the chipset are supported:
|
||
|
|
82801AA
|
||
|
|
82801AB
|
||
|
|
82801BA
|
||
|
|
82801CA/CAM
|
||
|
|
82801DB
|
||
|
|
82801EB/ER (ICH5/ICH5R)
|
||
|
|
6300ESB
|
||
|
|
ICH6
|
||
|
|
ICH7
|
||
|
|
ESB2
|
||
|
|
ICH8
|
||
|
|
ICH9
|
||
|
|
EP80579 (Tolapai)
|
||
|
|
ICH10
|
||
|
|
5/3400 Series (PCH)
|
||
|
|
6 Series (PCH)
|
||
|
|
Patsburg (PCH)
|
||
|
|
DH89xxCC (PCH)
|
||
|
|
Panther Point (PCH)
|
||
|
|
Lynx Point (PCH)
|
||
|
|
Avoton (SOC)
|
||
|
|
Wellsburg (PCH)
|
||
|
|
Coleto Creek (PCH)
|
||
|
|
Wildcat Point (PCH)
|
||
|
|
BayTrail (SOC)
|
||
|
|
Braswell (SOC)
|
||
|
|
Sunrise Point (PCH)
|
||
|
|
Kaby Lake (PCH)
|
||
|
|
DNV (SOC)
|
||
|
|
Broxton (SOC)
|
||
|
|
Lewisburg (PCH)
|
||
|
|
Gemini Lake (SOC)
|
||
|
|
Cannon Lake (PCH)
|
||
|
|
Cedar Fork (PCH)
|
||
|
|
Ice Lake (PCH)
|
||
|
|
Comet Lake (PCH)
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-i801.
|
||
|
|
|
||
|
|
config I2C_ISCH
|
||
|
|
tristate "Intel SCH SMBus 1.0"
|
||
|
|
depends on PCI
|
||
|
|
select LPC_SCH
|
||
|
|
help
|
||
|
|
Say Y here if you want to use SMBus controller on the Intel SCH
|
||
|
|
based systems.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-isch.
|
||
|
|
|
||
|
|
config I2C_ISMT
|
||
|
|
tristate "Intel iSMT SMBus Controller"
|
||
|
|
depends on PCI && X86
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the Intel
|
||
|
|
iSMT SMBus host controller interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module will be
|
||
|
|
called i2c-ismt.
|
||
|
|
|
||
|
|
config I2C_PIIX4
|
||
|
|
tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the Intel
|
||
|
|
PIIX4 family of mainboard I2C interfaces. Specifically, the following
|
||
|
|
versions of the chipset are supported (note that Serverworks is part
|
||
|
|
of Broadcom):
|
||
|
|
Intel PIIX4
|
||
|
|
Intel 440MX
|
||
|
|
ATI IXP200
|
||
|
|
ATI IXP300
|
||
|
|
ATI IXP400
|
||
|
|
ATI SB600
|
||
|
|
ATI SB700/SP5100
|
||
|
|
ATI SB800
|
||
|
|
AMD Hudson-2
|
||
|
|
AMD ML
|
||
|
|
AMD CZ
|
||
|
|
Serverworks OSB4
|
||
|
|
Serverworks CSB5
|
||
|
|
Serverworks CSB6
|
||
|
|
Serverworks HT-1000
|
||
|
|
Serverworks HT-1100
|
||
|
|
SMSC Victory66
|
||
|
|
|
||
|
|
Some AMD chipsets contain two PIIX4-compatible SMBus
|
||
|
|
controllers. This driver will attempt to use both controllers
|
||
|
|
on the SB700/SP5100, if they have been initialized by the BIOS.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-piix4.
|
||
|
|
|
||
|
|
config I2C_CHT_WC
|
||
|
|
tristate "Intel Cherry Trail Whiskey Cove PMIC smbus controller"
|
||
|
|
depends on INTEL_SOC_PMIC_CHTWC
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
SMBus controller found in the Intel Cherry Trail Whiskey Cove PMIC
|
||
|
|
found on some Intel Cherry Trail systems.
|
||
|
|
|
||
|
|
Note this controller is hooked up to a TI bq24292i charger-IC,
|
||
|
|
combined with a FUSB302 Type-C port-controller as such it is advised
|
||
|
|
to also select CONFIG_TYPEC_FUSB302=m.
|
||
|
|
|
||
|
|
config I2C_NFORCE2
|
||
|
|
tristate "Nvidia nForce2, nForce3 and nForce4"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the Nvidia
|
||
|
|
nForce2, nForce3 and nForce4 families of mainboard I2C interfaces.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-nforce2.
|
||
|
|
|
||
|
|
config I2C_NFORCE2_S4985
|
||
|
|
tristate "SMBus multiplexing on the Tyan S4985"
|
||
|
|
depends on I2C_NFORCE2 && X86
|
||
|
|
help
|
||
|
|
Enabling this option will add specific SMBus support for the Tyan
|
||
|
|
S4985 motherboard. On this 4-CPU board, the SMBus is multiplexed
|
||
|
|
over 4 different channels, where the various memory module EEPROMs
|
||
|
|
live. Saying yes here will give you access to these in addition
|
||
|
|
to the trunk.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-nforce2-s4985.
|
||
|
|
|
||
|
|
config I2C_SIS5595
|
||
|
|
tristate "SiS 5595"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
SiS5595 SMBus (a subset of I2C) interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-sis5595.
|
||
|
|
|
||
|
|
config I2C_SIS630
|
||
|
|
tristate "SiS 630/730/964"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
SiS630, SiS730 and SiS964 SMBus (a subset of I2C) interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-sis630.
|
||
|
|
|
||
|
|
config I2C_SIS96X
|
||
|
|
tristate "SiS 96x"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the SiS
|
||
|
|
96x SMBus (a subset of I2C) interfaces. Specifically, the following
|
||
|
|
chipsets are supported:
|
||
|
|
645/961
|
||
|
|
645DX/961
|
||
|
|
645DX/962
|
||
|
|
648/961
|
||
|
|
650/961
|
||
|
|
735
|
||
|
|
745
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-sis96x.
|
||
|
|
|
||
|
|
config I2C_VIA
|
||
|
|
tristate "VIA VT82C586B"
|
||
|
|
depends on PCI
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the VIA
|
||
|
|
82C586B I2C interface
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-via.
|
||
|
|
|
||
|
|
config I2C_VIAPRO
|
||
|
|
tristate "VIA VT82C596/82C686/82xx and CX700/VX8xx/VX900"
|
||
|
|
depends on PCI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the VIA
|
||
|
|
VT82C596 and later SMBus interface. Specifically, the following
|
||
|
|
chipsets are supported:
|
||
|
|
VT82C596A/B
|
||
|
|
VT82C686A/B
|
||
|
|
VT8231
|
||
|
|
VT8233/A
|
||
|
|
VT8235
|
||
|
|
VT8237R/A/S
|
||
|
|
VT8251
|
||
|
|
CX700
|
||
|
|
VX800/VX820
|
||
|
|
VX855/VX875
|
||
|
|
VX900
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-viapro.
|
||
|
|
|
||
|
|
if ACPI
|
||
|
|
|
||
|
|
comment "ACPI drivers"
|
||
|
|
|
||
|
|
config I2C_SCMI
|
||
|
|
tristate "SMBus Control Method Interface"
|
||
|
|
help
|
||
|
|
This driver supports the SMBus Control Method Interface. It needs the
|
||
|
|
BIOS to declare ACPI control methods as described in the SMBus Control
|
||
|
|
Method Interface specification.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here:
|
||
|
|
the module will be called i2c-scmi.
|
||
|
|
|
||
|
|
endif # ACPI
|
||
|
|
|
||
|
|
comment "Mac SMBus host controller drivers"
|
||
|
|
depends on PPC_CHRP || PPC_PMAC
|
||
|
|
|
||
|
|
config I2C_HYDRA
|
||
|
|
tristate "CHRP Apple Hydra Mac I/O I2C interface"
|
||
|
|
depends on PCI && PPC_CHRP
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
help
|
||
|
|
This supports the use of the I2C interface in the Apple Hydra Mac
|
||
|
|
I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you
|
||
|
|
have such a machine.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called i2c-hydra.
|
||
|
|
|
||
|
|
config I2C_POWERMAC
|
||
|
|
tristate "Powermac I2C interface"
|
||
|
|
depends on PPC_PMAC
|
||
|
|
default y
|
||
|
|
help
|
||
|
|
This exposes the various PowerMac i2c interfaces to the linux i2c
|
||
|
|
layer and to userland. It is used by various drivers on the PowerMac
|
||
|
|
platform, and should generally be enabled.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called i2c-powermac.
|
||
|
|
|
||
|
|
comment "I2C system bus drivers (mostly embedded / system-on-chip)"
|
||
|
|
|
||
|
|
config I2C_ALTERA
|
||
|
|
tristate "Altera Soft IP I2C"
|
||
|
|
depends on (ARCH_SOCFPGA || NIOS2) && OF
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Altera Soft IP I2C interfaces on SoCFPGA and Nios2 architectures.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-altera.
|
||
|
|
|
||
|
|
config I2C_ASPEED
|
||
|
|
tristate "Aspeed I2C Controller"
|
||
|
|
depends on ARCH_ASPEED || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Aspeed I2C controller.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-aspeed.
|
||
|
|
|
||
|
|
config I2C_AT91
|
||
|
|
tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
|
||
|
|
depends on ARCH_AT91
|
||
|
|
help
|
||
|
|
This supports the use of the I2C interface on Atmel AT91
|
||
|
|
processors.
|
||
|
|
|
||
|
|
A serious problem is that there is no documented way to issue
|
||
|
|
repeated START conditions for more than two messages, as needed
|
||
|
|
to support combined I2C messages. Use the i2c-gpio driver
|
||
|
|
unless your system can cope with this limitation.
|
||
|
|
|
||
|
|
Caution! at91rm9200, at91sam9261, at91sam9260, at91sam9263 devices
|
||
|
|
don't have clock stretching in transmission mode. For that reason,
|
||
|
|
you can encounter underrun issues causing premature stop sendings if
|
||
|
|
the latency to fill the transmission register is too long. If you
|
||
|
|
are facing this situation, use the i2c-gpio driver.
|
||
|
|
|
||
|
|
config I2C_AU1550
|
||
|
|
tristate "Au1550/Au1200/Au1300 SMBus interface"
|
||
|
|
depends on MIPS_ALCHEMY
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Au1550/Au1200/Au1300 SMBus interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-au1550.
|
||
|
|
|
||
|
|
config I2C_AXXIA
|
||
|
|
tristate "Axxia I2C controller"
|
||
|
|
depends on ARCH_AXXIA || COMPILE_TEST
|
||
|
|
default ARCH_AXXIA
|
||
|
|
help
|
||
|
|
Say yes if you want to support the I2C bus on Axxia platforms.
|
||
|
|
|
||
|
|
Please note that this controller is limited to transfers of maximum
|
||
|
|
255 bytes in length. Any attempt to to a larger transfer will return
|
||
|
|
an error.
|
||
|
|
|
||
|
|
config I2C_BCM2835
|
||
|
|
tristate "Broadcom BCM2835 I2C controller"
|
||
|
|
depends on ARCH_BCM2835
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
BCM2835 I2C controller.
|
||
|
|
|
||
|
|
If you don't know what to do here, say N.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called i2c-bcm2835.
|
||
|
|
|
||
|
|
config I2C_BCM_IPROC
|
||
|
|
tristate "Broadcom iProc I2C controller"
|
||
|
|
depends on ARCH_BCM_IPROC || COMPILE_TEST
|
||
|
|
default ARCH_BCM_IPROC
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Broadcom iProc I2C controller.
|
||
|
|
|
||
|
|
If you don't know what to do here, say N.
|
||
|
|
|
||
|
|
config I2C_BCM_KONA
|
||
|
|
tristate "BCM Kona I2C adapter"
|
||
|
|
depends on ARCH_BCM_MOBILE
|
||
|
|
default y
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C interface on the Broadcom Kona family of processors.
|
||
|
|
|
||
|
|
If you do not need KONA I2C interface, say N.
|
||
|
|
|
||
|
|
config I2C_BRCMSTB
|
||
|
|
tristate "BRCM Settop/DSL I2C controller"
|
||
|
|
depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_63XX || \
|
||
|
|
COMPILE_TEST
|
||
|
|
default y
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C interface on the Broadcom Settop/DSL SoCs.
|
||
|
|
|
||
|
|
If you do not need I2C interface, say N.
|
||
|
|
|
||
|
|
config I2C_CADENCE
|
||
|
|
tristate "Cadence I2C Controller"
|
||
|
|
depends on ARCH_ZYNQ || ARM64 || XTENSA
|
||
|
|
help
|
||
|
|
Say yes here to select Cadence I2C Host Controller. This controller is
|
||
|
|
e.g. used by Xilinx Zynq.
|
||
|
|
|
||
|
|
config I2C_CBUS_GPIO
|
||
|
|
tristate "CBUS I2C driver"
|
||
|
|
depends on GPIOLIB || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Support for CBUS access using I2C API. Mostly relevant for Nokia
|
||
|
|
Internet Tablets (770, N800 and N810).
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-cbus-gpio.
|
||
|
|
|
||
|
|
config I2C_CPM
|
||
|
|
tristate "Freescale CPM1 or CPM2 (MPC8xx/826x)"
|
||
|
|
depends on CPM1 || CPM2
|
||
|
|
help
|
||
|
|
This supports the use of the I2C interface on Freescale
|
||
|
|
processors with CPM1 or CPM2.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-cpm.
|
||
|
|
|
||
|
|
config I2C_DAVINCI
|
||
|
|
tristate "DaVinci I2C driver"
|
||
|
|
depends on ARCH_DAVINCI || ARCH_KEYSTONE
|
||
|
|
help
|
||
|
|
Support for TI DaVinci I2C controller driver.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-davinci.
|
||
|
|
|
||
|
|
Please note that this driver might be needed to bring up other
|
||
|
|
devices such as DaVinci NIC.
|
||
|
|
For details please see http://www.ti.com/davinci
|
||
|
|
|
||
|
|
config I2C_DESIGNWARE_CORE
|
||
|
|
tristate
|
||
|
|
|
||
|
|
config I2C_DESIGNWARE_PLATFORM
|
||
|
|
tristate "Synopsys DesignWare Platform"
|
||
|
|
select I2C_DESIGNWARE_CORE
|
||
|
|
depends on (ACPI && COMMON_CLK) || !ACPI
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Synopsys DesignWare I2C adapter.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-designware-platform.
|
||
|
|
|
||
|
|
config I2C_DESIGNWARE_SLAVE
|
||
|
|
bool "Synopsys DesignWare Slave"
|
||
|
|
select I2C_SLAVE
|
||
|
|
depends on I2C_DESIGNWARE_PLATFORM
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Synopsys DesignWare I2C slave adapter.
|
||
|
|
|
||
|
|
This is not a standalone module, this module compiles together with
|
||
|
|
i2c-designware-core.
|
||
|
|
|
||
|
|
config I2C_DESIGNWARE_PCI
|
||
|
|
tristate "Synopsys DesignWare PCI"
|
||
|
|
depends on PCI
|
||
|
|
select I2C_DESIGNWARE_CORE
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Synopsys DesignWare I2C adapter. Only master mode is supported.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-designware-pci.
|
||
|
|
|
||
|
|
config I2C_DESIGNWARE_BAYTRAIL
|
||
|
|
bool "Intel Baytrail I2C semaphore support"
|
||
|
|
depends on ACPI
|
||
|
|
depends on (I2C_DESIGNWARE_PLATFORM=m && IOSF_MBI) || \
|
||
|
|
(I2C_DESIGNWARE_PLATFORM=y && IOSF_MBI=y)
|
||
|
|
help
|
||
|
|
This driver enables managed host access to the PMIC I2C bus on select
|
||
|
|
Intel BayTrail platforms using the X-Powers AXP288 PMIC. It allows
|
||
|
|
the host to request uninterrupted access to the PMIC's I2C bus from
|
||
|
|
the platform firmware controlling it. You should say Y if running on
|
||
|
|
a BayTrail system using the AXP288.
|
||
|
|
|
||
|
|
config I2C_DIGICOLOR
|
||
|
|
tristate "Conexant Digicolor I2C driver"
|
||
|
|
depends on ARCH_DIGICOLOR
|
||
|
|
help
|
||
|
|
Support for Conexant Digicolor SoCs (CX92755) I2C controller driver.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-digicolor.
|
||
|
|
|
||
|
|
config I2C_EFM32
|
||
|
|
tristate "EFM32 I2C controller"
|
||
|
|
depends on ARCH_EFM32 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver supports the i2c block found in Energy Micro's EFM32
|
||
|
|
SoCs.
|
||
|
|
|
||
|
|
config I2C_EG20T
|
||
|
|
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C"
|
||
|
|
depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
|
||
|
|
help
|
||
|
|
This driver is for PCH(Platform controller Hub) I2C of EG20T which
|
||
|
|
is an IOH(Input/Output Hub) for x86 embedded processor.
|
||
|
|
This driver can access PCH I2C bus device.
|
||
|
|
|
||
|
|
This driver also can be used for LAPIS Semiconductor IOH(Input/
|
||
|
|
Output Hub), ML7213, ML7223 and ML7831.
|
||
|
|
ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
|
||
|
|
for MP(Media Phone) use and ML7831 IOH is for general purpose use.
|
||
|
|
ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
|
||
|
|
ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
|
||
|
|
|
||
|
|
config I2C_EMEV2
|
||
|
|
tristate "EMMA Mobile series I2C adapter"
|
||
|
|
depends on HAVE_CLK
|
||
|
|
select I2C_SLAVE
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C interface on the Renesas Electronics EM/EV family of processors.
|
||
|
|
|
||
|
|
config I2C_EXYNOS5
|
||
|
|
tristate "Exynos5 high-speed I2C driver"
|
||
|
|
depends on ARCH_EXYNOS && OF
|
||
|
|
default y
|
||
|
|
help
|
||
|
|
High-speed I2C controller on Exynos5 based Samsung SoCs.
|
||
|
|
|
||
|
|
config I2C_GPIO
|
||
|
|
tristate "GPIO-based bitbanging I2C"
|
||
|
|
depends on GPIOLIB || COMPILE_TEST
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
help
|
||
|
|
This is a very simple bitbanging I2C driver utilizing the
|
||
|
|
arch-neutral GPIO API to control the SCL and SDA lines.
|
||
|
|
|
||
|
|
config I2C_GPIO_FAULT_INJECTOR
|
||
|
|
bool "GPIO-based fault injector"
|
||
|
|
depends on I2C_GPIO
|
||
|
|
help
|
||
|
|
This adds some functionality to the i2c-gpio driver which can inject
|
||
|
|
faults to an I2C bus, so another bus master can be stress-tested.
|
||
|
|
This is for debugging. If unsure, say 'no'.
|
||
|
|
|
||
|
|
config I2C_HIGHLANDER
|
||
|
|
tristate "Highlander FPGA SMBus interface"
|
||
|
|
depends on SH_HIGHLANDER
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for
|
||
|
|
the SMBus interface located in the FPGA on various Highlander
|
||
|
|
boards, particularly the R0P7780LC0011RL and R0P7785LC0011RL
|
||
|
|
FPGAs. This is wholly unrelated to the SoC I2C.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-highlander.
|
||
|
|
|
||
|
|
config I2C_IBM_IIC
|
||
|
|
tristate "IBM PPC 4xx on-chip I2C interface"
|
||
|
|
depends on 4xx
|
||
|
|
help
|
||
|
|
Say Y here if you want to use IIC peripheral found on
|
||
|
|
embedded IBM PPC 4xx based systems.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-ibm_iic.
|
||
|
|
|
||
|
|
config I2C_IMG
|
||
|
|
tristate "Imagination Technologies I2C SCB Controller"
|
||
|
|
depends on MIPS || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the IMG I2C SCB controller,
|
||
|
|
available on the TZ1090 and other IMG SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-img-scb.
|
||
|
|
|
||
|
|
config I2C_IMX
|
||
|
|
tristate "IMX I2C interface"
|
||
|
|
depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the IIC bus controller on
|
||
|
|
the Freescale i.MX/MXC, Layerscape or ColdFire processors.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-imx.
|
||
|
|
|
||
|
|
config I2C_IMX_LPI2C
|
||
|
|
tristate "IMX Low Power I2C interface"
|
||
|
|
depends on ARCH_MXC || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the Low Power IIC bus controller
|
||
|
|
on the Freescale i.MX processors.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-imx-lpi2c.
|
||
|
|
|
||
|
|
config I2C_IOP3XX
|
||
|
|
tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
|
||
|
|
depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the IIC bus controller on
|
||
|
|
the Intel IOPx3xx I/O Processors or IXP4xx Network Processors.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-iop3xx.
|
||
|
|
|
||
|
|
config I2C_JZ4780
|
||
|
|
tristate "JZ4780 I2C controller interface support"
|
||
|
|
depends on MACH_JZ4780 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Ingenic JZ4780 I2C controller.
|
||
|
|
|
||
|
|
If you don't know what to do here, say N.
|
||
|
|
|
||
|
|
config I2C_KEMPLD
|
||
|
|
tristate "Kontron COM I2C Controller"
|
||
|
|
depends on MFD_KEMPLD
|
||
|
|
help
|
||
|
|
This enables support for the I2C bus interface on some Kontron ETX
|
||
|
|
and COMexpress (ETXexpress) modules.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-kempld.
|
||
|
|
|
||
|
|
config I2C_LPC2K
|
||
|
|
tristate "I2C bus support for NXP LPC2K/LPC178x/18xx/43xx"
|
||
|
|
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
|
||
|
|
help
|
||
|
|
This driver supports the I2C interface found several NXP
|
||
|
|
devices including LPC2xxx, LPC178x/7x and LPC18xx/43xx.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-lpc2k.
|
||
|
|
|
||
|
|
config I2C_MESON
|
||
|
|
tristate "Amlogic Meson I2C controller"
|
||
|
|
depends on ARCH_MESON || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C interface on the Amlogic Meson family of SoCs.
|
||
|
|
|
||
|
|
config I2C_MPC
|
||
|
|
tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
|
||
|
|
depends on PPC
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
|
||
|
|
MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-mpc.
|
||
|
|
|
||
|
|
config I2C_MT65XX
|
||
|
|
tristate "MediaTek I2C adapter"
|
||
|
|
depends on ARCH_MEDIATEK || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This selects the MediaTek(R) Integrated Inter Circuit bus driver
|
||
|
|
for MT65xx and MT81xx.
|
||
|
|
If you want to use MediaTek(R) I2C interface, say Y or M here.
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config I2C_MTK
|
||
|
|
tristate "MediaTek I2C Driver"
|
||
|
|
default n
|
||
|
|
help
|
||
|
|
This selects the MediaTek(R) Integrated Inter Circuit bus driver.
|
||
|
|
MediaTek(R) I2C bus adapter is the base for some other I2C client,
|
||
|
|
eg: touch, sensors.
|
||
|
|
If you want to use MediaTek(R) I2C interface, say Y or M here.
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config I2C_MV64XXX
|
||
|
|
tristate "Marvell mv64xxx I2C Controller"
|
||
|
|
depends on MV64X60 || PLAT_ORION || ARCH_SUNXI || ARCH_MVEBU
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
built-in I2C interface on the Marvell 64xxx line of host bridges.
|
||
|
|
This driver is also used for Allwinner SoCs I2C controllers.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-mv64xxx.
|
||
|
|
|
||
|
|
config I2C_MXS
|
||
|
|
tristate "Freescale i.MX28 I2C interface"
|
||
|
|
depends on SOC_IMX28
|
||
|
|
select STMP_DEVICE
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the I2C bus controller on
|
||
|
|
the Freescale i.MX28 processors.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-mxs.
|
||
|
|
|
||
|
|
config I2C_NOMADIK
|
||
|
|
tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
|
||
|
|
depends on ARM_AMBA
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C interface from ST-Ericsson's Nomadik and Ux500 architectures,
|
||
|
|
as well as the STA2X11 PCIe I/O HUB.
|
||
|
|
|
||
|
|
config I2C_OCORES
|
||
|
|
tristate "OpenCores I2C Controller"
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
OpenCores I2C controller. For details see
|
||
|
|
http://www.opencores.org/projects.cgi/web/i2c/overview
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-ocores.
|
||
|
|
|
||
|
|
config I2C_OMAP
|
||
|
|
tristate "OMAP I2C adapter"
|
||
|
|
depends on ARCH_OMAP || ARCH_K3
|
||
|
|
default y if MACH_OMAP_H3 || MACH_OMAP_OSK
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C interface on the Texas Instruments OMAP1/2 family of processors.
|
||
|
|
Like OMAP1510/1610/1710/5912 and OMAP242x.
|
||
|
|
For details see http://www.ti.com/omap.
|
||
|
|
|
||
|
|
config I2C_OWL
|
||
|
|
tristate "Actions Semiconductor Owl I2C Controller"
|
||
|
|
depends on ARCH_ACTIONS || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the I2C bus controller on
|
||
|
|
the Actions Semiconductor Owl SoC's.
|
||
|
|
|
||
|
|
config I2C_PASEMI
|
||
|
|
tristate "PA Semi SMBus interface"
|
||
|
|
depends on PPC_PASEMI && PCI
|
||
|
|
help
|
||
|
|
Supports the PA Semi PWRficient on-chip SMBus interfaces.
|
||
|
|
|
||
|
|
config I2C_PCA_PLATFORM
|
||
|
|
tristate "PCA9564/PCA9665 as platform device"
|
||
|
|
select I2C_ALGOPCA
|
||
|
|
default n
|
||
|
|
help
|
||
|
|
This driver supports a memory mapped Philips PCA9564/PCA9665
|
||
|
|
parallel bus to I2C bus controller.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-pca-platform.
|
||
|
|
|
||
|
|
config I2C_PMCMSP
|
||
|
|
tristate "PMC MSP I2C TWI Controller"
|
||
|
|
depends on PMC_MSP
|
||
|
|
help
|
||
|
|
This driver supports the PMC TWI controller on MSP devices.
|
||
|
|
|
||
|
|
This driver can also be built as module. If so, the module
|
||
|
|
will be called i2c-pmcmsp.
|
||
|
|
|
||
|
|
config I2C_PNX
|
||
|
|
tristate "I2C bus support for Philips PNX and NXP LPC targets"
|
||
|
|
depends on ARCH_LPC32XX
|
||
|
|
help
|
||
|
|
This driver supports the Philips IP3204 I2C IP block master and/or
|
||
|
|
slave controller
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-pnx.
|
||
|
|
|
||
|
|
config I2C_PUV3
|
||
|
|
tristate "PKUnity v3 I2C bus support"
|
||
|
|
depends on UNICORE32 && ARCH_PUV3
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
help
|
||
|
|
This driver supports the I2C IP inside the PKUnity-v3 SoC.
|
||
|
|
This I2C bus controller is under AMBA/AXI bus.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-puv3.
|
||
|
|
|
||
|
|
config I2C_PXA
|
||
|
|
tristate "Intel PXA2XX I2C adapter"
|
||
|
|
depends on ARCH_PXA || ARCH_MMP || ARCH_MVEBU || (X86_32 && PCI && OF)
|
||
|
|
help
|
||
|
|
If you have devices in the PXA I2C bus, say yes to this option.
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-pxa.
|
||
|
|
|
||
|
|
config I2C_PXA_PCI
|
||
|
|
def_bool I2C_PXA && X86_32 && PCI && OF
|
||
|
|
|
||
|
|
config I2C_PXA_SLAVE
|
||
|
|
bool "Intel PXA2XX I2C Slave comms support"
|
||
|
|
depends on I2C_PXA && !X86_32
|
||
|
|
help
|
||
|
|
Support I2C slave mode communications on the PXA I2C bus. This
|
||
|
|
is necessary for systems where the PXA may be a target on the
|
||
|
|
I2C bus.
|
||
|
|
|
||
|
|
config I2C_QCOM_GENI
|
||
|
|
tristate "Qualcomm Technologies Inc.'s GENI based I2C controller"
|
||
|
|
depends on ARCH_QCOM || COMPILE_TEST
|
||
|
|
depends on QCOM_GENI_SE
|
||
|
|
help
|
||
|
|
This driver supports GENI serial engine based I2C controller in
|
||
|
|
master mode on the Qualcomm Technologies Inc.'s SoCs. If you say
|
||
|
|
yes to this option, support will be included for the built-in I2C
|
||
|
|
interface on the Qualcomm Technologies Inc.'s SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-qcom-geni.
|
||
|
|
|
||
|
|
config I2C_QUP
|
||
|
|
tristate "Qualcomm QUP based I2C controller"
|
||
|
|
depends on ARCH_QCOM
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
built-in I2C interface on the Qualcomm SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-qup.
|
||
|
|
|
||
|
|
config I2C_RIIC
|
||
|
|
tristate "Renesas RIIC adapter"
|
||
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Renesas RIIC I2C interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-riic.
|
||
|
|
|
||
|
|
config I2C_RK3X
|
||
|
|
tristate "Rockchip RK3xxx I2C adapter"
|
||
|
|
depends on OF && COMMON_CLK
|
||
|
|
help
|
||
|
|
Say Y here to include support for the I2C adapter in Rockchip RK3xxx
|
||
|
|
SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module will
|
||
|
|
be called i2c-rk3x.
|
||
|
|
|
||
|
|
config HAVE_S3C2410_I2C
|
||
|
|
bool
|
||
|
|
help
|
||
|
|
This will include I2C support for Samsung SoCs. If you want to
|
||
|
|
include I2C support for any machine, kindly select this in the
|
||
|
|
respective Kconfig file.
|
||
|
|
|
||
|
|
config I2C_S3C2410
|
||
|
|
tristate "S3C2410 I2C Driver"
|
||
|
|
depends on HAVE_S3C2410_I2C
|
||
|
|
help
|
||
|
|
Say Y here to include support for I2C controller in the
|
||
|
|
Samsung SoCs.
|
||
|
|
|
||
|
|
config I2C_SH7760
|
||
|
|
tristate "Renesas SH7760 I2C Controller"
|
||
|
|
depends on CPU_SUBTYPE_SH7760
|
||
|
|
help
|
||
|
|
This driver supports the 2 I2C interfaces on the Renesas SH7760.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-sh7760.
|
||
|
|
|
||
|
|
config I2C_SH_MOBILE
|
||
|
|
tristate "SuperH Mobile I2C Controller"
|
||
|
|
depends on ARCH_SHMOBILE || ARCH_RENESAS || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
built-in I2C interface on the Renesas SH-Mobile processor.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-sh_mobile.
|
||
|
|
|
||
|
|
config I2C_SIMTEC
|
||
|
|
tristate "Simtec Generic I2C interface"
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for
|
||
|
|
the Simtec Generic I2C interface. This driver is for the
|
||
|
|
simple I2C bus used on newer Simtec products for general
|
||
|
|
I2C, such as DDC on the Simtec BBD2016A.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-simtec.
|
||
|
|
|
||
|
|
config I2C_SIRF
|
||
|
|
tristate "CSR SiRFprimaII I2C interface"
|
||
|
|
depends on ARCH_SIRF
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
CSR SiRFprimaII I2C interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-sirf.
|
||
|
|
|
||
|
|
config I2C_SPRD
|
||
|
|
bool "Spreadtrum I2C interface"
|
||
|
|
depends on I2C=y && ARCH_SPRD
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Spreadtrum I2C interface.
|
||
|
|
|
||
|
|
config I2C_ST
|
||
|
|
tristate "STMicroelectronics SSC I2C support"
|
||
|
|
depends on ARCH_STI
|
||
|
|
help
|
||
|
|
Enable this option to add support for STMicroelectronics SoCs
|
||
|
|
hardware SSC (Synchronous Serial Controller) as an I2C controller.
|
||
|
|
|
||
|
|
This driver can also be built as module. If so, the module
|
||
|
|
will be called i2c-st.
|
||
|
|
|
||
|
|
config I2C_STM32F4
|
||
|
|
tristate "STMicroelectronics STM32F4 I2C support"
|
||
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Enable this option to add support for STM32 I2C controller embedded
|
||
|
|
in STM32F4 SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as module. If so, the module
|
||
|
|
will be called i2c-stm32f4.
|
||
|
|
|
||
|
|
config I2C_STM32F7
|
||
|
|
tristate "STMicroelectronics STM32F7 I2C support"
|
||
|
|
depends on ARCH_STM32 || COMPILE_TEST
|
||
|
|
select I2C_SLAVE
|
||
|
|
help
|
||
|
|
Enable this option to add support for STM32 I2C controller embedded
|
||
|
|
in STM32F7 SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as module. If so, the module
|
||
|
|
will be called i2c-stm32f7.
|
||
|
|
|
||
|
|
config I2C_STU300
|
||
|
|
tristate "ST Microelectronics DDC I2C interface"
|
||
|
|
depends on MACH_U300
|
||
|
|
default y if MACH_U300
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C interface from ST Microelectronics simply called "DDC I2C"
|
||
|
|
supporting both I2C and DDC, used in e.g. the U300 series
|
||
|
|
mobile platforms.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-stu300.
|
||
|
|
|
||
|
|
config I2C_SUN6I_P2WI
|
||
|
|
tristate "Allwinner sun6i internal P2WI controller"
|
||
|
|
depends on RESET_CONTROLLER
|
||
|
|
depends on MACH_SUN6I || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
P2WI (Push/Pull 2 Wire Interface) controller embedded in some sunxi
|
||
|
|
SOCs.
|
||
|
|
The P2WI looks like an SMBus controller (which supports only byte
|
||
|
|
accesses), except that it only supports one slave device.
|
||
|
|
This interface is used to connect to specific PMIC devices (like the
|
||
|
|
AXP221).
|
||
|
|
|
||
|
|
config I2C_SYNQUACER
|
||
|
|
tristate "Socionext SynQuacer I2C controller"
|
||
|
|
depends on ARCH_SYNQUACER || COMPILE_TEST
|
||
|
|
help
|
||
|
|
Say Y here to include support for the I2C controller used in some
|
||
|
|
Fujitsu and Socionext SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-synquacer.
|
||
|
|
|
||
|
|
config I2C_TEGRA
|
||
|
|
tristate "NVIDIA Tegra internal I2C controller"
|
||
|
|
depends on ARCH_TEGRA
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
I2C controller embedded in NVIDIA Tegra SOCs
|
||
|
|
|
||
|
|
config I2C_TEGRA_BPMP
|
||
|
|
tristate "NVIDIA Tegra BPMP I2C controller"
|
||
|
|
depends on TEGRA_BPMP
|
||
|
|
default y
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the I2C
|
||
|
|
controller embedded in NVIDIA Tegra SoCs accessed via the BPMP.
|
||
|
|
|
||
|
|
This I2C driver is a 'virtual' I2C driver. The real driver is part
|
||
|
|
of the BPMP firmware, and this driver merely communicates with that
|
||
|
|
real driver.
|
||
|
|
|
||
|
|
config I2C_UNIPHIER
|
||
|
|
tristate "UniPhier FIFO-less I2C controller"
|
||
|
|
depends on ARCH_UNIPHIER || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for
|
||
|
|
the UniPhier FIFO-less I2C interface embedded in PH1-LD4, PH1-sLD8,
|
||
|
|
or older UniPhier SoCs.
|
||
|
|
|
||
|
|
config I2C_UNIPHIER_F
|
||
|
|
tristate "UniPhier FIFO-builtin I2C controller"
|
||
|
|
depends on ARCH_UNIPHIER || COMPILE_TEST
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for
|
||
|
|
the UniPhier FIFO-builtin I2C interface embedded in PH1-Pro4,
|
||
|
|
PH1-Pro5, or newer UniPhier SoCs.
|
||
|
|
|
||
|
|
config I2C_VERSATILE
|
||
|
|
tristate "ARM Versatile/Realview I2C bus support"
|
||
|
|
depends on ARCH_MPS2 || ARCH_VERSATILE || ARCH_REALVIEW || ARCH_VEXPRESS || COMPILE_TEST
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
help
|
||
|
|
Say yes if you want to support the I2C serial bus on ARMs Versatile
|
||
|
|
range of platforms.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-versatile.
|
||
|
|
|
||
|
|
config I2C_WMT
|
||
|
|
tristate "Wondermedia WM8xxx SoC I2C bus support"
|
||
|
|
depends on ARCH_VT8500
|
||
|
|
help
|
||
|
|
Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
|
||
|
|
SoCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module will be
|
||
|
|
called i2c-wmt.
|
||
|
|
|
||
|
|
config I2C_OCTEON
|
||
|
|
tristate "Cavium OCTEON I2C bus support"
|
||
|
|
depends on CAVIUM_OCTEON_SOC
|
||
|
|
help
|
||
|
|
Say yes if you want to support the I2C serial bus on Cavium
|
||
|
|
OCTEON SOC.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-octeon.
|
||
|
|
|
||
|
|
config I2C_THUNDERX
|
||
|
|
tristate "Cavium ThunderX I2C bus support"
|
||
|
|
depends on 64BIT && PCI && (ARM64 || COMPILE_TEST)
|
||
|
|
select I2C_SMBUS
|
||
|
|
help
|
||
|
|
Say yes if you want to support the I2C serial bus on Cavium
|
||
|
|
ThunderX SOC.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-thunderx.
|
||
|
|
|
||
|
|
config I2C_XILINX
|
||
|
|
tristate "Xilinx I2C Controller"
|
||
|
|
depends on HAS_IOMEM
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
Xilinx I2C controller.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called xilinx_i2c.
|
||
|
|
|
||
|
|
config I2C_XLR
|
||
|
|
tristate "Netlogic XLR and Sigma Designs I2C support"
|
||
|
|
depends on CPU_XLR || ARCH_TANGO
|
||
|
|
help
|
||
|
|
This driver enables support for the on-chip I2C interface of
|
||
|
|
the Netlogic XLR/XLS MIPS processors and Sigma Designs SOCs.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-xlr.
|
||
|
|
|
||
|
|
config I2C_XLP9XX
|
||
|
|
tristate "XLP9XX I2C support"
|
||
|
|
depends on CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST
|
||
|
|
help
|
||
|
|
This driver enables support for the on-chip I2C interface of
|
||
|
|
the Broadcom XLP9xx/XLP5xx MIPS and Vulcan ARM64 processors.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module will
|
||
|
|
be called i2c-xlp9xx.
|
||
|
|
|
||
|
|
config I2C_RCAR
|
||
|
|
tristate "Renesas R-Car I2C Controller"
|
||
|
|
depends on ARCH_RENESAS || COMPILE_TEST
|
||
|
|
select I2C_SLAVE
|
||
|
|
select RESET_CONTROLLER if ARCH_RCAR_GEN3
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
R-Car I2C controller.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-rcar.
|
||
|
|
|
||
|
|
comment "External I2C/SMBus adapter drivers"
|
||
|
|
|
||
|
|
config I2C_DIOLAN_U2C
|
||
|
|
tristate "Diolan U2C-12 USB adapter"
|
||
|
|
depends on USB
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for Diolan
|
||
|
|
U2C-12, a USB to I2C interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-diolan-u2c.
|
||
|
|
|
||
|
|
config I2C_DLN2
|
||
|
|
tristate "Diolan DLN-2 USB I2C adapter"
|
||
|
|
depends on MFD_DLN2
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for Diolan
|
||
|
|
DLN2, a USB to I2C interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-dln2.
|
||
|
|
|
||
|
|
config I2C_PARPORT
|
||
|
|
tristate "Parallel port adapter"
|
||
|
|
depends on PARPORT
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
select I2C_SMBUS
|
||
|
|
help
|
||
|
|
This supports parallel port I2C adapters such as the ones made by
|
||
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
||
|
|
Basically any adapter using the parallel port as an I2C bus with
|
||
|
|
no extra chipset is supported by this driver, or could be.
|
||
|
|
|
||
|
|
This driver is a replacement for (and was inspired by) an older
|
||
|
|
driver named i2c-philips-par. The new driver supports more devices,
|
||
|
|
and makes it easier to add support for new devices.
|
||
|
|
|
||
|
|
An adapter type parameter is now mandatory. Please read the file
|
||
|
|
Documentation/i2c/busses/i2c-parport for details.
|
||
|
|
|
||
|
|
Another driver exists, named i2c-parport-light, which doesn't depend
|
||
|
|
on the parport driver. This is meant for embedded systems. Don't say
|
||
|
|
Y here if you intend to say Y or M there.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called i2c-parport.
|
||
|
|
|
||
|
|
config I2C_PARPORT_LIGHT
|
||
|
|
tristate "Parallel port adapter (light)"
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
select I2C_SMBUS
|
||
|
|
help
|
||
|
|
This supports parallel port I2C adapters such as the ones made by
|
||
|
|
Philips or Velleman, Analog Devices evaluation boards, and more.
|
||
|
|
Basically any adapter using the parallel port as an I2C bus with
|
||
|
|
no extra chipset is supported by this driver, or could be.
|
||
|
|
|
||
|
|
This driver is a light version of i2c-parport. It doesn't depend
|
||
|
|
on the parport driver, and uses direct I/O access instead. This
|
||
|
|
might be preferred on embedded systems where wasting memory for
|
||
|
|
the clean but heavy parport handling is not an option. The
|
||
|
|
drawback is a reduced portability and the impossibility to
|
||
|
|
daisy-chain other parallel port devices.
|
||
|
|
|
||
|
|
Don't say Y here if you said Y or M to i2c-parport. Saying M to
|
||
|
|
both is possible but both modules should not be loaded at the same
|
||
|
|
time.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called i2c-parport-light.
|
||
|
|
|
||
|
|
config I2C_ROBOTFUZZ_OSIF
|
||
|
|
tristate "RobotFuzz Open Source InterFace USB adapter"
|
||
|
|
depends on USB
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
RobotFuzz Open Source InterFace USB to I2C interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-osif.
|
||
|
|
|
||
|
|
config I2C_TAOS_EVM
|
||
|
|
tristate "TAOS evaluation module"
|
||
|
|
depends on TTY
|
||
|
|
select SERIO
|
||
|
|
select SERIO_SERPORT
|
||
|
|
default n
|
||
|
|
help
|
||
|
|
This supports TAOS evaluation modules on serial port. In order to
|
||
|
|
use this driver, you will need the inputattach tool, which is part
|
||
|
|
of the input-utils package.
|
||
|
|
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called i2c-taos-evm.
|
||
|
|
|
||
|
|
config I2C_TINY_USB
|
||
|
|
tristate "Tiny-USB adapter"
|
||
|
|
depends on USB
|
||
|
|
help
|
||
|
|
If you say yes to this option, support will be included for the
|
||
|
|
i2c-tiny-usb, a simple do-it-yourself USB to I2C interface. See
|
||
|
|
http://www.harbaum.org/till/i2c_tiny_usb for hardware details.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-tiny-usb.
|
||
|
|
|
||
|
|
config I2C_VIPERBOARD
|
||
|
|
tristate "Viperboard I2C master support"
|
||
|
|
depends on MFD_VIPERBOARD && USB
|
||
|
|
help
|
||
|
|
Say yes here to access the I2C part of the Nano River
|
||
|
|
Technologies Viperboard as I2C master.
|
||
|
|
See viperboard API specification and Nano
|
||
|
|
River Tech's viperboard.h for detailed meaning
|
||
|
|
of the module parameters.
|
||
|
|
|
||
|
|
comment "Other I2C/SMBus bus drivers"
|
||
|
|
|
||
|
|
config I2C_ACORN
|
||
|
|
tristate "Acorn IOC/IOMD I2C bus support"
|
||
|
|
depends on ARCH_ACORN
|
||
|
|
default y
|
||
|
|
select I2C_ALGOBIT
|
||
|
|
help
|
||
|
|
Say yes if you want to support the I2C bus on Acorn platforms.
|
||
|
|
|
||
|
|
If you don't know, say Y.
|
||
|
|
|
||
|
|
config I2C_ELEKTOR
|
||
|
|
tristate "Elektor ISA card"
|
||
|
|
depends on ISA && HAS_IOPORT_MAP && BROKEN_ON_SMP
|
||
|
|
select I2C_ALGOPCF
|
||
|
|
help
|
||
|
|
This supports the PCF8584 ISA bus I2C adapter. Say Y if you own
|
||
|
|
such an adapter.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called i2c-elektor.
|
||
|
|
|
||
|
|
config I2C_MLXCPLD
|
||
|
|
tristate "Mellanox I2C driver"
|
||
|
|
depends on X86_64
|
||
|
|
help
|
||
|
|
This exposes the Mellanox platform I2C busses to the linux I2C layer
|
||
|
|
for X86 based systems.
|
||
|
|
Controller is implemented as CPLD logic.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module will be
|
||
|
|
called as i2c-mlxcpld.
|
||
|
|
|
||
|
|
config I2C_PCA_ISA
|
||
|
|
tristate "PCA9564/PCA9665 on an ISA bus"
|
||
|
|
depends on ISA
|
||
|
|
select I2C_ALGOPCA
|
||
|
|
default n
|
||
|
|
help
|
||
|
|
This driver supports ISA boards using the Philips PCA9564/PCA9665
|
||
|
|
parallel bus to I2C bus controller.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called i2c-pca-isa.
|
||
|
|
|
||
|
|
This device is almost undetectable and using this driver on a
|
||
|
|
system which doesn't have this device will result in long
|
||
|
|
delays when I2C/SMBus chip drivers are loaded (e.g. at boot
|
||
|
|
time). If unsure, say N.
|
||
|
|
|
||
|
|
config I2C_SIBYTE
|
||
|
|
tristate "SiByte SMBus interface"
|
||
|
|
depends on SIBYTE_SB1xxx_SOC
|
||
|
|
help
|
||
|
|
Supports the SiByte SOC on-chip I2C interfaces (2 channels).
|
||
|
|
|
||
|
|
config I2C_CROS_EC_TUNNEL
|
||
|
|
tristate "ChromeOS EC tunnel I2C bus"
|
||
|
|
depends on MFD_CROS_EC
|
||
|
|
help
|
||
|
|
If you say yes here you get an I2C bus that will tunnel i2c commands
|
||
|
|
through to the other side of the ChromeOS EC to the i2c bus
|
||
|
|
connected there. This will work whatever the interface used to
|
||
|
|
talk to the EC (SPI, I2C or LPC).
|
||
|
|
|
||
|
|
config I2C_XGENE_SLIMPRO
|
||
|
|
tristate "APM X-Gene SoC I2C SLIMpro devices support"
|
||
|
|
depends on ARCH_XGENE && MAILBOX
|
||
|
|
help
|
||
|
|
Enable I2C bus access using the APM X-Gene SoC SLIMpro
|
||
|
|
co-processor. The I2C device access the I2C bus via the X-Gene
|
||
|
|
to SLIMpro (On chip coprocessor) mailbox mechanism.
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config SCx200_ACB
|
||
|
|
tristate "Geode ACCESS.bus support"
|
||
|
|
depends on X86_32 && PCI
|
||
|
|
help
|
||
|
|
Enable the use of the ACCESS.bus controllers on the Geode SCx200 and
|
||
|
|
SC1100 processors and the CS5535 and CS5536 Geode companion devices.
|
||
|
|
|
||
|
|
If you don't know what to do here, say N.
|
||
|
|
|
||
|
|
This support is also available as a module. If so, the module
|
||
|
|
will be called scx200_acb.
|
||
|
|
|
||
|
|
config I2C_OPAL
|
||
|
|
tristate "IBM OPAL I2C driver"
|
||
|
|
depends on PPC_POWERNV
|
||
|
|
default y
|
||
|
|
help
|
||
|
|
This exposes the PowerNV platform i2c busses to the linux i2c layer,
|
||
|
|
the driver is based on the OPAL interfaces.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module will be
|
||
|
|
called as i2c-opal.
|
||
|
|
|
||
|
|
config I2C_ZX2967
|
||
|
|
tristate "ZTE ZX2967 I2C support"
|
||
|
|
depends on ARCH_ZX
|
||
|
|
default y
|
||
|
|
help
|
||
|
|
Selecting this option will add ZX2967 I2C driver.
|
||
|
|
This driver can also be built as a module. If so, the module will be
|
||
|
|
called i2c-zx2967.
|
||
|
|
|
||
|
|
config I2C_FSI
|
||
|
|
tristate "FSI I2C driver"
|
||
|
|
depends on FSI
|
||
|
|
help
|
||
|
|
Driver for FSI bus attached I2C masters. These are I2C masters that
|
||
|
|
are connected to the system over an FSI bus, instead of the more
|
||
|
|
common PCI or MMIO interface.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module will be
|
||
|
|
called as i2c-fsi.
|
||
|
|
|
||
|
|
endmenu
|