55 lines
1.4 KiB
Plaintext
55 lines
1.4 KiB
Plaintext
|
Microchip LAN78xx Gigabit Ethernet controller
|
||
|
|
|
||
|
|
The LAN78XX devices are usually configured by programming their OTP or with
|
||
|
|
an external EEPROM, but some platforms (e.g. Raspberry Pi 3 B+) have neither.
|
||
|
|
The Device Tree properties, if present, override the OTP and EEPROM.
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be one of "usb424,7800", "usb424,7801" or "usb424,7850".
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- local-mac-address: see ethernet.txt
|
||
|
|
- mac-address: see ethernet.txt
|
||
|
|
|
||
|
|
Optional properties of the embedded PHY:
|
||
|
|
- microchip,led-modes: a 0..4 element vector, with each element configuring
|
||
|
|
the operating mode of an LED. Omitted LEDs are turned off. Allowed values
|
||
|
|
are defined in "include/dt-bindings/net/microchip-lan78xx.h".
|
||
|
|
|
||
|
|
Example:
|
||
|
|
|
||
|
|
/* Based on the configuration for a Raspberry Pi 3 B+ */
|
||
|
|
&usb {
|
||
|
|
usb-port@1 {
|
||
|
|
compatible = "usb424,2514";
|
||
|
|
reg = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
usb-port@1 {
|
||
|
|
compatible = "usb424,2514";
|
||
|
|
reg = <1>;
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
|
||
|
|
ethernet: ethernet@1 {
|
||
|
|
compatible = "usb424,7800";
|
||
|
|
reg = <1>;
|
||
|
|
local-mac-address = [ 00 11 22 33 44 55 ];
|
||
|
|
|
||
|
|
mdio {
|
||
|
|
#address-cells = <0x1>;
|
||
|
|
#size-cells = <0x0>;
|
||
|
|
eth_phy: ethernet-phy@1 {
|
||
|
|
reg = <1>;
|
||
|
|
microchip,led-modes = <
|
||
|
|
LAN78XX_LINK_1000_ACTIVITY
|
||
|
|
LAN78XX_LINK_10_100_ACTIVITY
|
||
|
|
>;
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|
||
|
|
};
|