523 lines
12 KiB
C
523 lines
12 KiB
C
|
/* DVB USB compliant Linux driver for the Friio USB2.0 ISDB-T receiver.
|
||
|
|
*
|
||
|
|
* Copyright (C) 2009 Akihiro Tsukada <tskd2@yahoo.co.jp>
|
||
|
|
*
|
||
|
|
* This module is based off the the gl861 and vp702x modules.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify it
|
||
|
|
* under the terms of the GNU General Public License as published by the Free
|
||
|
|
* Software Foundation, version 2.
|
||
|
|
*
|
||
|
|
* see Documentation/media/dvb-drivers/dvb-usb.rst for more information
|
||
|
|
*/
|
||
|
|
#include "friio.h"
|
||
|
|
|
||
|
|
/* debug */
|
||
|
|
int dvb_usb_friio_debug;
|
||
|
|
module_param_named(debug, dvb_usb_friio_debug, int, 0644);
|
||
|
|
MODULE_PARM_DESC(debug,
|
||
|
|
"set debugging level (1=info,2=xfer,4=rc,8=fe (or-able))."
|
||
|
|
DVB_USB_DEBUG_STATUS);
|
||
|
|
|
||
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Indirect I2C access to the PLL via FE.
|
||
|
|
* whole I2C protocol data to the PLL is sent via the FE's I2C register.
|
||
|
|
* This is done by a control msg to the FE with the I2C data accompanied, and
|
||
|
|
* a specific USB request number is assigned for that purpose.
|
||
|
|
*
|
||
|
|
* this func sends wbuf[1..] to the I2C register wbuf[0] at addr (= at FE).
|
||
|
|
* TODO: refoctored, smarter i2c functions.
|
||
|
|
*/
|
||
|
|
static int gl861_i2c_ctrlmsg_data(struct dvb_usb_device *d, u8 addr,
|
||
|
|
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
|
||
|
|
{
|
||
|
|
u16 index = wbuf[0]; /* must be JDVBT90502_2ND_I2C_REG(=0xFE) */
|
||
|
|
u16 value = addr << (8 + 1);
|
||
|
|
int wo = (rbuf == NULL || rlen == 0); /* write only */
|
||
|
|
u8 req, type;
|
||
|
|
|
||
|
|
deb_xfer("write to PLL:0x%02x via FE reg:0x%02x, len:%d\n",
|
||
|
|
wbuf[1], wbuf[0], wlen - 1);
|
||
|
|
|
||
|
|
if (wo && wlen >= 2) {
|
||
|
|
req = GL861_REQ_I2C_DATA_CTRL_WRITE;
|
||
|
|
type = GL861_WRITE;
|
||
|
|
udelay(20);
|
||
|
|
return usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
|
||
|
|
req, type, value, index,
|
||
|
|
&wbuf[1], wlen - 1, 2000);
|
||
|
|
}
|
||
|
|
|
||
|
|
deb_xfer("not supported ctrl-msg, aborting.");
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* normal I2C access (without extra data arguments).
|
||
|
|
* write to the register wbuf[0] at I2C address addr with the value wbuf[1],
|
||
|
|
* or read from the register wbuf[0].
|
||
|
|
* register address can be 16bit (wbuf[2]<<8 | wbuf[0]) if wlen==3
|
||
|
|
*/
|
||
|
|
static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
|
||
|
|
u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
|
||
|
|
{
|
||
|
|
u16 index;
|
||
|
|
u16 value = addr << (8 + 1);
|
||
|
|
int wo = (rbuf == NULL || rlen == 0); /* write-only */
|
||
|
|
u8 req, type;
|
||
|
|
unsigned int pipe;
|
||
|
|
|
||
|
|
/* special case for the indirect I2C access to the PLL via FE, */
|
||
|
|
if (addr == friio_fe_config.demod_address &&
|
||
|
|
wbuf[0] == JDVBT90502_2ND_I2C_REG)
|
||
|
|
return gl861_i2c_ctrlmsg_data(d, addr, wbuf, wlen, rbuf, rlen);
|
||
|
|
|
||
|
|
if (wo) {
|
||
|
|
req = GL861_REQ_I2C_WRITE;
|
||
|
|
type = GL861_WRITE;
|
||
|
|
pipe = usb_sndctrlpipe(d->udev, 0);
|
||
|
|
} else { /* rw */
|
||
|
|
req = GL861_REQ_I2C_READ;
|
||
|
|
type = GL861_READ;
|
||
|
|
pipe = usb_rcvctrlpipe(d->udev, 0);
|
||
|
|
}
|
||
|
|
|
||
|
|
switch (wlen) {
|
||
|
|
case 1:
|
||
|
|
index = wbuf[0];
|
||
|
|
break;
|
||
|
|
case 2:
|
||
|
|
index = wbuf[0];
|
||
|
|
value = value + wbuf[1];
|
||
|
|
break;
|
||
|
|
case 3:
|
||
|
|
/* special case for 16bit register-address */
|
||
|
|
index = (wbuf[2] << 8) | wbuf[0];
|
||
|
|
value = value + wbuf[1];
|
||
|
|
break;
|
||
|
|
default:
|
||
|
|
deb_xfer("wlen = %x, aborting.", wlen);
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
msleep(1);
|
||
|
|
return usb_control_msg(d->udev, pipe, req, type,
|
||
|
|
value, index, rbuf, rlen, 2000);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* I2C */
|
||
|
|
static int gl861_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
|
||
|
|
int num)
|
||
|
|
{
|
||
|
|
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
||
|
|
int i;
|
||
|
|
|
||
|
|
|
||
|
|
if (num > 2)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
||
|
|
return -EAGAIN;
|
||
|
|
|
||
|
|
for (i = 0; i < num; i++) {
|
||
|
|
/* write/read request */
|
||
|
|
if (i + 1 < num && (msg[i + 1].flags & I2C_M_RD)) {
|
||
|
|
if (gl861_i2c_msg(d, msg[i].addr,
|
||
|
|
msg[i].buf, msg[i].len,
|
||
|
|
msg[i + 1].buf, msg[i + 1].len) < 0)
|
||
|
|
break;
|
||
|
|
i++;
|
||
|
|
} else
|
||
|
|
if (gl861_i2c_msg(d, msg[i].addr, msg[i].buf,
|
||
|
|
msg[i].len, NULL, 0) < 0)
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
mutex_unlock(&d->i2c_mutex);
|
||
|
|
return i;
|
||
|
|
}
|
||
|
|
|
||
|
|
static u32 gl861_i2c_func(struct i2c_adapter *adapter)
|
||
|
|
{
|
||
|
|
return I2C_FUNC_I2C;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int friio_ext_ctl(struct dvb_usb_adapter *adap,
|
||
|
|
u32 sat_color, int lnb_on)
|
||
|
|
{
|
||
|
|
int i;
|
||
|
|
int ret;
|
||
|
|
struct i2c_msg msg;
|
||
|
|
u8 *buf;
|
||
|
|
u32 mask;
|
||
|
|
u8 lnb = (lnb_on) ? FRIIO_CTL_LNB : 0;
|
||
|
|
|
||
|
|
buf = kmalloc(2, GFP_KERNEL);
|
||
|
|
if (!buf)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
msg.addr = 0x00;
|
||
|
|
msg.flags = 0;
|
||
|
|
msg.len = 2;
|
||
|
|
msg.buf = buf;
|
||
|
|
|
||
|
|
buf[0] = 0x00;
|
||
|
|
|
||
|
|
/* send 2bit header (&B10) */
|
||
|
|
buf[1] = lnb | FRIIO_CTL_LED | FRIIO_CTL_STROBE;
|
||
|
|
ret = gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
buf[1] |= FRIIO_CTL_CLK;
|
||
|
|
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
|
||
|
|
buf[1] = lnb | FRIIO_CTL_STROBE;
|
||
|
|
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
buf[1] |= FRIIO_CTL_CLK;
|
||
|
|
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
|
||
|
|
/* send 32bit(satur, R, G, B) data in serial */
|
||
|
|
mask = 1 << 31;
|
||
|
|
for (i = 0; i < 32; i++) {
|
||
|
|
buf[1] = lnb | FRIIO_CTL_STROBE;
|
||
|
|
if (sat_color & mask)
|
||
|
|
buf[1] |= FRIIO_CTL_LED;
|
||
|
|
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
buf[1] |= FRIIO_CTL_CLK;
|
||
|
|
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
mask >>= 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* set the strobe off */
|
||
|
|
buf[1] = lnb;
|
||
|
|
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
buf[1] |= FRIIO_CTL_CLK;
|
||
|
|
ret += gl861_i2c_xfer(&adap->dev->i2c_adap, &msg, 1);
|
||
|
|
|
||
|
|
kfree(buf);
|
||
|
|
return (ret == 70);
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff);
|
||
|
|
|
||
|
|
/* TODO: move these init cmds to the FE's init routine? */
|
||
|
|
static u8 streaming_init_cmds[][2] = {
|
||
|
|
{0x33, 0x08},
|
||
|
|
{0x37, 0x40},
|
||
|
|
{0x3A, 0x1F},
|
||
|
|
{0x3B, 0xFF},
|
||
|
|
{0x3C, 0x1F},
|
||
|
|
{0x3D, 0xFF},
|
||
|
|
{0x38, 0x00},
|
||
|
|
{0x35, 0x00},
|
||
|
|
{0x39, 0x00},
|
||
|
|
{0x36, 0x00},
|
||
|
|
};
|
||
|
|
static int cmdlen = sizeof(streaming_init_cmds) / 2;
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Command sequence in this init function is a replay
|
||
|
|
* of the captured USB commands from the Windows proprietary driver.
|
||
|
|
*/
|
||
|
|
static int friio_initialize(struct dvb_usb_device *d)
|
||
|
|
{
|
||
|
|
int ret;
|
||
|
|
int i;
|
||
|
|
int retry = 0;
|
||
|
|
u8 *rbuf, *wbuf;
|
||
|
|
|
||
|
|
deb_info("%s called.\n", __func__);
|
||
|
|
|
||
|
|
wbuf = kmalloc(3, GFP_KERNEL);
|
||
|
|
if (!wbuf)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
rbuf = kmalloc(2, GFP_KERNEL);
|
||
|
|
if (!rbuf) {
|
||
|
|
kfree(wbuf);
|
||
|
|
return -ENOMEM;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* use gl861_i2c_msg instead of gl861_i2c_xfer(), */
|
||
|
|
/* because the i2c device is not set up yet. */
|
||
|
|
wbuf[0] = 0x11;
|
||
|
|
wbuf[1] = 0x02;
|
||
|
|
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
msleep(2);
|
||
|
|
|
||
|
|
wbuf[0] = 0x11;
|
||
|
|
wbuf[1] = 0x00;
|
||
|
|
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
msleep(1);
|
||
|
|
|
||
|
|
/* following msgs should be in the FE's init code? */
|
||
|
|
/* cmd sequence to identify the device type? (friio black/white) */
|
||
|
|
wbuf[0] = 0x03;
|
||
|
|
wbuf[1] = 0x80;
|
||
|
|
/* can't use gl861_i2c_cmd, as the register-addr is 16bit(0x0100) */
|
||
|
|
ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
|
||
|
|
GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
|
||
|
|
0x1200, 0x0100, wbuf, 2, 2000);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
msleep(2);
|
||
|
|
wbuf[0] = 0x00;
|
||
|
|
wbuf[2] = 0x01; /* reg.0x0100 */
|
||
|
|
wbuf[1] = 0x00;
|
||
|
|
ret = gl861_i2c_msg(d, 0x12 >> 1, wbuf, 3, rbuf, 2);
|
||
|
|
/* my Friio White returns 0xffff. */
|
||
|
|
if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
msleep(2);
|
||
|
|
wbuf[0] = 0x03;
|
||
|
|
wbuf[1] = 0x80;
|
||
|
|
ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
|
||
|
|
GL861_REQ_I2C_DATA_CTRL_WRITE, GL861_WRITE,
|
||
|
|
0x9000, 0x0100, wbuf, 2, 2000);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
msleep(2);
|
||
|
|
wbuf[0] = 0x00;
|
||
|
|
wbuf[2] = 0x01; /* reg.0x0100 */
|
||
|
|
wbuf[1] = 0x00;
|
||
|
|
ret = gl861_i2c_msg(d, 0x90 >> 1, wbuf, 3, rbuf, 2);
|
||
|
|
/* my Friio White returns 0xffff again. */
|
||
|
|
if (ret < 0 || rbuf[0] != 0xff || rbuf[1] != 0xff)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
msleep(1);
|
||
|
|
|
||
|
|
restart:
|
||
|
|
/* ============ start DEMOD init cmds ================== */
|
||
|
|
/* read PLL status to clear the POR bit */
|
||
|
|
wbuf[0] = JDVBT90502_2ND_I2C_REG;
|
||
|
|
wbuf[1] = (FRIIO_PLL_ADDR << 1) + 1; /* +1 for reading */
|
||
|
|
ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, NULL, 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
msleep(5);
|
||
|
|
/* note: DEMODULATOR has 16bit register-address. */
|
||
|
|
wbuf[0] = 0x00;
|
||
|
|
wbuf[2] = 0x01; /* reg addr: 0x0100 */
|
||
|
|
wbuf[1] = 0x00; /* val: not used */
|
||
|
|
ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 3, rbuf, 1);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
/*
|
||
|
|
msleep(1);
|
||
|
|
wbuf[0] = 0x80;
|
||
|
|
wbuf[1] = 0x00;
|
||
|
|
ret = gl861_i2c_msg(d, FRIIO_DEMOD_ADDR, wbuf, 2, rbuf, 1);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
*/
|
||
|
|
if (rbuf[0] & 0x80) { /* still in PowerOnReset state? */
|
||
|
|
if (++retry > 3) {
|
||
|
|
deb_info("failed to get the correct FE demod status:0x%02x\n",
|
||
|
|
rbuf[0]);
|
||
|
|
goto error;
|
||
|
|
}
|
||
|
|
msleep(100);
|
||
|
|
goto restart;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* TODO: check return value in rbuf */
|
||
|
|
/* =========== end DEMOD init cmds ===================== */
|
||
|
|
msleep(1);
|
||
|
|
|
||
|
|
wbuf[0] = 0x30;
|
||
|
|
wbuf[1] = 0x04;
|
||
|
|
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
msleep(2);
|
||
|
|
/* following 2 cmds unnecessary? */
|
||
|
|
wbuf[0] = 0x00;
|
||
|
|
wbuf[1] = 0x01;
|
||
|
|
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
wbuf[0] = 0x06;
|
||
|
|
wbuf[1] = 0x0F;
|
||
|
|
ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
/* some streaming ctl cmds (maybe) */
|
||
|
|
msleep(10);
|
||
|
|
for (i = 0; i < cmdlen; i++) {
|
||
|
|
ret = gl861_i2c_msg(d, 0x00, streaming_init_cmds[i], 2,
|
||
|
|
NULL, 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
msleep(1);
|
||
|
|
}
|
||
|
|
msleep(20);
|
||
|
|
|
||
|
|
/* change the LED color etc. */
|
||
|
|
ret = friio_streaming_ctrl(&d->adapter[0], 0);
|
||
|
|
if (ret < 0)
|
||
|
|
goto error;
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
|
||
|
|
error:
|
||
|
|
kfree(wbuf);
|
||
|
|
kfree(rbuf);
|
||
|
|
deb_info("%s:ret == %d\n", __func__, ret);
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Callbacks for DVB USB */
|
||
|
|
|
||
|
|
static int friio_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
||
|
|
{
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
deb_info("%s called.(%d)\n", __func__, onoff);
|
||
|
|
|
||
|
|
/* set the LED color and saturation (and LNB on) */
|
||
|
|
if (onoff)
|
||
|
|
ret = friio_ext_ctl(adap, 0x6400ff64, 1);
|
||
|
|
else
|
||
|
|
ret = friio_ext_ctl(adap, 0x96ff00ff, 1);
|
||
|
|
|
||
|
|
if (ret != 1) {
|
||
|
|
deb_info("%s failed to send cmdx. ret==%d\n", __func__, ret);
|
||
|
|
return -EREMOTEIO;
|
||
|
|
}
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int friio_frontend_attach(struct dvb_usb_adapter *adap)
|
||
|
|
{
|
||
|
|
if (friio_initialize(adap->dev) < 0)
|
||
|
|
return -EIO;
|
||
|
|
|
||
|
|
adap->fe_adap[0].fe = jdvbt90502_attach(adap->dev);
|
||
|
|
if (adap->fe_adap[0].fe == NULL)
|
||
|
|
return -EIO;
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* DVB USB Driver stuff */
|
||
|
|
static struct dvb_usb_device_properties friio_properties;
|
||
|
|
|
||
|
|
static int friio_probe(struct usb_interface *intf,
|
||
|
|
const struct usb_device_id *id)
|
||
|
|
{
|
||
|
|
struct dvb_usb_device *d;
|
||
|
|
struct usb_host_interface *alt;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
if (intf->num_altsetting < GL861_ALTSETTING_COUNT)
|
||
|
|
return -ENODEV;
|
||
|
|
|
||
|
|
alt = usb_altnum_to_altsetting(intf, FRIIO_BULK_ALTSETTING);
|
||
|
|
if (alt == NULL) {
|
||
|
|
deb_rc("not alt found!\n");
|
||
|
|
return -ENODEV;
|
||
|
|
}
|
||
|
|
ret = usb_set_interface(interface_to_usbdev(intf),
|
||
|
|
alt->desc.bInterfaceNumber,
|
||
|
|
alt->desc.bAlternateSetting);
|
||
|
|
if (ret != 0) {
|
||
|
|
deb_rc("failed to set alt-setting!\n");
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
ret = dvb_usb_device_init(intf, &friio_properties,
|
||
|
|
THIS_MODULE, &d, adapter_nr);
|
||
|
|
if (ret == 0)
|
||
|
|
friio_streaming_ctrl(&d->adapter[0], 1);
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
struct jdvbt90502_config friio_fe_config = {
|
||
|
|
.demod_address = FRIIO_DEMOD_ADDR,
|
||
|
|
.pll_address = FRIIO_PLL_ADDR,
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct i2c_algorithm gl861_i2c_algo = {
|
||
|
|
.master_xfer = gl861_i2c_xfer,
|
||
|
|
.functionality = gl861_i2c_func,
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct usb_device_id friio_table[] = {
|
||
|
|
{ USB_DEVICE(USB_VID_774, USB_PID_FRIIO_WHITE) },
|
||
|
|
{ } /* Terminating entry */
|
||
|
|
};
|
||
|
|
MODULE_DEVICE_TABLE(usb, friio_table);
|
||
|
|
|
||
|
|
|
||
|
|
static struct dvb_usb_device_properties friio_properties = {
|
||
|
|
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
||
|
|
.usb_ctrl = DEVICE_SPECIFIC,
|
||
|
|
|
||
|
|
.size_of_priv = 0,
|
||
|
|
|
||
|
|
.num_adapters = 1,
|
||
|
|
.adapter = {
|
||
|
|
/* caps:0 => no pid filter, 188B TS packet */
|
||
|
|
/* GL861 has a HW pid filter, but no info available. */
|
||
|
|
{
|
||
|
|
.num_frontends = 1,
|
||
|
|
.fe = {{
|
||
|
|
.caps = 0,
|
||
|
|
|
||
|
|
.frontend_attach = friio_frontend_attach,
|
||
|
|
.streaming_ctrl = friio_streaming_ctrl,
|
||
|
|
|
||
|
|
.stream = {
|
||
|
|
.type = USB_BULK,
|
||
|
|
/* count <= MAX_NO_URBS_FOR_DATA_STREAM(10) */
|
||
|
|
.count = 8,
|
||
|
|
.endpoint = 0x01,
|
||
|
|
.u = {
|
||
|
|
/* GL861 has 6KB buf inside */
|
||
|
|
.bulk = {
|
||
|
|
.buffersize = 16384,
|
||
|
|
}
|
||
|
|
}
|
||
|
|
},
|
||
|
|
}},
|
||
|
|
}
|
||
|
|
},
|
||
|
|
.i2c_algo = &gl861_i2c_algo,
|
||
|
|
|
||
|
|
.num_device_descs = 1,
|
||
|
|
.devices = {
|
||
|
|
{
|
||
|
|
.name = "774 Friio ISDB-T USB2.0",
|
||
|
|
.cold_ids = { NULL },
|
||
|
|
.warm_ids = { &friio_table[0], NULL },
|
||
|
|
},
|
||
|
|
}
|
||
|
|
};
|
||
|
|
|
||
|
|
static struct usb_driver friio_driver = {
|
||
|
|
.name = "dvb_usb_friio",
|
||
|
|
.probe = friio_probe,
|
||
|
|
.disconnect = dvb_usb_device_exit,
|
||
|
|
.id_table = friio_table,
|
||
|
|
};
|
||
|
|
|
||
|
|
module_usb_driver(friio_driver);
|
||
|
|
|
||
|
|
MODULE_AUTHOR("Akihiro Tsukada <tskd2@yahoo.co.jp>");
|
||
|
|
MODULE_DESCRIPTION("Driver for Friio ISDB-T USB2.0 Receiver");
|
||
|
|
MODULE_VERSION("0.2");
|
||
|
|
MODULE_LICENSE("GPL");
|