menu "Firmware loader" config FW_LOADER tristate "Firmware loading facility" if EXPERT default y help This enables the firmware loading facility in the kernel. The kernel will first look for built-in firmware, if it has any. Next, it will look for the requested firmware in a series of filesystem paths: o firmware_class path module parameter or kernel boot param o /lib/firmware/updates/UTS_RELEASE o /lib/firmware/updates o /lib/firmware/UTS_RELEASE o /lib/firmware Enabling this feature only increases your kernel image by about 828 bytes, enable this option unless you are certain you don't need firmware. You typically want this built-in (=y) but you can also enable this as a module, in which case the firmware_class module will be built. You also want to be sure to enable this built-in if you are going to enable built-in firmware (CONFIG_EXTRA_FIRMWARE). if FW_LOADER config EXTRA_FIRMWARE string "Build named firmware blobs into the kernel binary" help Device drivers which require firmware can typically deal with having the kernel load firmware from the various supported /lib/firmware/ paths. This option enables you to build into the kernel firmware files. Built-in firmware searches are preceded over firmware lookups using your filesystem over the supported /lib/firmware paths documented on CONFIG_FW_LOADER. This may be useful for testing or if the firmware is required early on in boot and cannot rely on the firmware being placed in an initrd or initramfs. This option is a string and takes the (space-separated) names of the firmware files -- the same names that appear in MODULE_FIRMWARE() and request_firmware() in the source. These files should exist under the directory specified by the EXTRA_FIRMWARE_DIR option, which is /lib/firmware by default. For example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", copy the usb8388.bin file into /lib/firmware, and build the kernel. Then any request_firmware("usb8388.bin") will be satisfied internally inside the kernel without ever looking at your filesystem at runtime. WARNING: If you include additional firmware files into your binary kernel image that are not available under the terms of the GPL, then it may be a violation of the GPL to distribute the resulting image since it combines both GPL and non-GPL work. You should consult a lawyer of your own before distributing such an image. config EXTRA_FIRMWARE_DIR string "Firmware blobs root directory" depends on EXTRA_FIRMWARE != "" default "/lib/firmware" help This option controls the directory in which the kernel build system looks for the firmware files listed in the EXTRA_FIRMWARE option. config FW_LOADER_USER_HELPER bool "Enable the firmware sysfs fallback mechanism" help This option enables a sysfs loading facility to enable firmware loading to the kernel through userspace as a fallback mechanism if and only if the kernel's direct filesystem lookup for the firmware failed using the different /lib/firmware/ paths, or the path specified in the firmware_class path module parameter, or the firmware_class path kernel boot parameter if the firmware_class is built-in. For details on how to work with the sysfs fallback mechanism refer to Documentation/driver-api/firmware/fallback-mechanisms.rst. The direct filesystem lookup for firmware is always used first now. If the kernel's direct filesystem lookup for firmware fails to find the requested firmware a sysfs fallback loading facility is made available and userspace is informed about this through uevents. The uevent can be suppressed if the driver explicitly requested it, this is known as the driver using the custom fallback mechanism. If the custom fallback mechanism is used userspace must always acknowledge failure to find firmware as the timeout for the fallback mechanism is disabled, and failed requests will linger forever. This used to be the default firmware loading facility, and udev used to listen for uvents to load firmware for the kernel. The firmware loading facility functionality in udev has been removed, as such it can no longer be relied upon as a fallback mechanism. Linux no longer relies on or uses a fallback mechanism in userspace. If you need to rely on one refer to the permissively licensed firmwared: https://github.com/teg/firmwared Since this was the default firmware loading facility at one point, old userspace may exist which relies upon it, and as such this mechanism can never be removed from the kernel. You should only enable this functionality if you are certain you require a fallback mechanism and have a userspace mechanism ready to load firmware in case it is not found. One main reason for this may be if you have drivers which require firmware built-in and for whatever reason cannot place the required firmware in initramfs. Another reason kernels may have this feature enabled is to support a driver which explicitly relies on this fallback mechanism. Only two drivers need this today: o CONFIG_LEDS_LP55XX_COMMON o CONFIG_DELL_RBU Outside of supporting the above drivers, another reason for needing this may be that your firmware resides outside of the paths the kernel looks for and cannot possibly be specified using the firmware_class path module parameter or kernel firmware_class path boot parameter if firmware_class is built-in. A modern use case may be to temporarily mount a custom partition during provisioning which is only accessible to userspace, and then to use it to look for and fetch the required firmware. Such type of driver functionality may not even ever be desirable upstream by vendors, and as such is only required to be supported as an interface for provisioning. Since udev's firmware loading facility has been removed you can use firmwared or a fork of it to customize how you want to load firmware based on uevents issued. Enabling this option will increase your kernel image size by about 13436 bytes. If you are unsure about this, say N here, unless you are Linux distribution and need to support the above two drivers, or you are certain you need to support some really custom firmware loading facility in userspace. config FW_LOADER_USER_HELPER_FALLBACK bool "Force the firmware sysfs fallback mechanism when possible" depends on FW_LOADER_USER_HELPER help Enabling this option forces a sysfs userspace fallback mechanism to be used for all firmware requests which explicitly do not disable a a fallback mechanism. Firmware calls which do prohibit a fallback mechanism is request_firmware_direct(). This option is kept for backward compatibility purposes given this precise mechanism can also be enabled by setting the proc sysctl value to true: /proc/sys/kernel/firmware_config/force_sysfs_fallback If you are unsure about this, say N here. config FW_CACHE bool "Enable firmware caching during suspend" depends on PM_SLEEP default y if PM_SLEEP help Because firmware caching generates uevent messages that are sent over a netlink socket, it can prevent suspend on many platforms. It is also not always useful, so on such platforms we have the option. If unsure, say Y. endif # FW_LOADER endmenu