===== General Properties ===== What: /sys/class/power_supply//manufacturer Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports the name of the device manufacturer. Access: Read Valid values: Represented as string What: /sys/class/power_supply//model_name Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports the name of the device model. Access: Read Valid values: Represented as string What: /sys/class/power_supply//serial_number Date: January 2008 Contact: linux-pm@vger.kernel.org Description: Reports the serial number of the device. Access: Read Valid values: Represented as string What: /sys/class/power_supply//type Date: May 2010 Contact: linux-pm@vger.kernel.org Description: Describes the main type of the supply. Access: Read Valid values: "Battery", "UPS", "Mains", "USB" ===== Battery Properties ===== What: /sys/class/power_supply//capacity Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Fine grain representation of battery capacity. Access: Read Valid values: 0 - 100 (percent) What: /sys/class/power_supply//capacity_alert_max Date: July 2012 Contact: linux-pm@vger.kernel.org Description: Maximum battery capacity trip-wire value where the supply will notify user-space of the event. This is normally used for the battery discharging scenario where user-space needs to know the battery has dropped to an upper level so it can take appropriate action (e.g. warning user that battery level is low). Access: Read, Write Valid values: 0 - 100 (percent) What: /sys/class/power_supply//capacity_alert_min Date: July 2012 Contact: linux-pm@vger.kernel.org Description: Minimum battery capacity trip-wire value where the supply will notify user-space of the event. This is normally used for the battery discharging scenario where user-space needs to know the battery has dropped to a lower level so it can take appropriate action (e.g. warning user that battery level is critically low). Access: Read, Write Valid values: 0 - 100 (percent) What: /sys/class/power_supply//capacity_level Date: June 2009 Contact: linux-pm@vger.kernel.org Description: Coarse representation of battery capacity. Access: Read Valid values: "Unknown", "Critical", "Low", "Normal", "High", "Full" What: /sys/class/power_supply//current_avg Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports an average IBAT current reading for the battery, over a fixed period. Normally devices will provide a fixed interval in which they average readings to smooth out the reported value. Access: Read Valid values: Represented in microamps What: /sys/class/power_supply//current_max Date: October 2010 Contact: linux-pm@vger.kernel.org Description: Reports the maximum IBAT current allowed into the battery. Access: Read Valid values: Represented in microamps What: /sys/class/power_supply//current_now Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports an instant, single IBAT current reading for the battery. This value is not averaged/smoothed. Access: Read Valid values: Represented in microamps What: /sys/class/power_supply//charge_type Date: July 2009 Contact: linux-pm@vger.kernel.org Description: Represents the type of charging currently being applied to the battery. Access: Read Valid values: "Unknown", "N/A", "Trickle", "Fast" What: /sys/class/power_supply//charge_term_current Date: July 2014 Contact: linux-pm@vger.kernel.org Description: Reports the charging current value which is used to determine when the battery is considered full and charging should end. Access: Read Valid values: Represented in microamps What: /sys/class/power_supply//health Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports the health of the battery or battery side of charger functionality. Access: Read Valid values: "Unknown", "Good", "Overheat", "Dead", "Over voltage", "Unspecified failure", "Cold", "Watchdog timer expire", "Safety timer expire", "Over current", "Warm", "Cool", "Hot" What: /sys/class/power_supply//precharge_current Date: June 2017 Contact: linux-pm@vger.kernel.org Description: Reports the charging current applied during pre-charging phase for a battery charge cycle. Access: Read Valid values: Represented in microamps What: /sys/class/power_supply//present Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports whether a battery is present or not in the system. Access: Read Valid values: 0: Absent 1: Present What: /sys/class/power_supply//status Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Represents the charging status of the battery. Normally this is read-only reporting although for some supplies this can be used to enable/disable charging to the battery. Access: Read, Write Valid values: "Unknown", "Charging", "Discharging", "Not charging", "Full" What: /sys/class/power_supply//technology Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Describes the battery technology supported by the supply. Access: Read Valid values: "Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd", "LiMn" What: /sys/class/power_supply//temp Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports the current TBAT battery temperature reading. Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_alert_max Date: July 2012 Contact: linux-pm@vger.kernel.org Description: Maximum TBAT temperature trip-wire value where the supply will notify user-space of the event. This is normally used for the battery charging scenario where user-space needs to know the battery temperature has crossed an upper threshold so it can take appropriate action (e.g. warning user that battery level is critically high, and charging has stopped). Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_alert_min Date: July 2012 Contact: linux-pm@vger.kernel.org Description: Minimum TBAT temperature trip-wire value where the supply will notify user-space of the event. This is normally used for the battery charging scenario where user-space needs to know the battery temperature has crossed a lower threshold so it can take appropriate action (e.g. warning user that battery level is high, and charging current has been reduced accordingly to remedy the situation). Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_max Date: July 2014 Contact: linux-pm@vger.kernel.org Description: Reports the maximum allowed TBAT battery temperature for charging. Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_min Date: July 2014 Contact: linux-pm@vger.kernel.org Description: Reports the minimum allowed TBAT battery temperature for charging. Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//voltage_avg, Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports an average VBAT voltage reading for the battery, over a fixed period. Normally devices will provide a fixed interval in which they average readings to smooth out the reported value. Access: Read Valid values: Represented in microvolts What: /sys/class/power_supply//voltage_max, Date: January 2008 Contact: linux-pm@vger.kernel.org Description: Reports the maximum safe VBAT voltage permitted for the battery, during charging. Access: Read Valid values: Represented in microvolts What: /sys/class/power_supply//voltage_min, Date: January 2008 Contact: linux-pm@vger.kernel.org Description: Reports the minimum safe VBAT voltage permitted for the battery, during discharging. Access: Read Valid values: Represented in microvolts What: /sys/class/power_supply//voltage_now, Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports an instant, single VBAT voltage reading for the battery. This value is not averaged/smoothed. Access: Read Valid values: Represented in microvolts ===== USB Properties ===== What: /sys/class/power_supply//current_avg Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports an average IBUS current reading over a fixed period. Normally devices will provide a fixed interval in which they average readings to smooth out the reported value. Access: Read Valid values: Represented in microamps What: /sys/class/power_supply//current_max Date: October 2010 Contact: linux-pm@vger.kernel.org Description: Reports the maximum IBUS current the supply can support. Access: Read Valid values: Represented in microamps What: /sys/class/power_supply//current_now Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports the IBUS current supplied now. This value is generally read-only reporting, unless the 'online' state of the supply is set to be programmable, in which case this value can be set within the reported min/max range. Access: Read, Write Valid values: Represented in microamps What: /sys/class/power_supply//input_current_limit Date: July 2014 Contact: linux-pm@vger.kernel.org Description: Details the incoming IBUS current limit currently set in the supply. Normally this is configured based on the type of connection made (e.g. A configured SDP should output a maximum of 500mA so the input current limit is set to the same value). Access: Read, Write Valid values: Represented in microamps What: /sys/class/power_supply//online, Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Indicates if VBUS is present for the supply. When the supply is online, and the supply allows it, then it's possible to switch between online states (e.g. Fixed -> Programmable for a PD_PPS USB supply so voltage and current can be controlled). Access: Read, Write Valid values: 0: Offline 1: Online Fixed - Fixed Voltage Supply 2: Online Programmable - Programmable Voltage Supply What: /sys/class/power_supply//temp Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports the current supply temperature reading. This would normally be the internal temperature of the device itself (e.g TJUNC temperature of an IC) Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_alert_max Date: July 2012 Contact: linux-pm@vger.kernel.org Description: Maximum supply temperature trip-wire value where the supply will notify user-space of the event. This is normally used for the charging scenario where user-space needs to know the supply temperature has crossed an upper threshold so it can take appropriate action (e.g. warning user that the supply temperature is critically high, and charging has stopped to remedy the situation). Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_alert_min Date: July 2012 Contact: linux-pm@vger.kernel.org Description: Minimum supply temperature trip-wire value where the supply will notify user-space of the event. This is normally used for the charging scenario where user-space needs to know the supply temperature has crossed a lower threshold so it can take appropriate action (e.g. warning user that the supply temperature is high, and charging current has been reduced accordingly to remedy the situation). Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_max Date: July 2014 Contact: linux-pm@vger.kernel.org Description: Reports the maximum allowed supply temperature for operation. Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//temp_min Date: July 2014 Contact: linux-pm@vger.kernel.org Description: Reports the mainimum allowed supply temperature for operation. Access: Read Valid values: Represented in 1/10 Degrees Celsius What: /sys/class/power_supply//usb_type Date: March 2018 Contact: linux-pm@vger.kernel.org Description: Reports what type of USB connection is currently active for the supply, for example it can show if USB-PD capable source is attached. Access: Read-Only Valid values: "Unknown", "SDP", "DCP", "CDP", "ACA", "C", "PD", "PD_DRP", "PD_PPS", "BrickID" What: /sys/class/power_supply//voltage_max Date: January 2008 Contact: linux-pm@vger.kernel.org Description: Reports the maximum VBUS voltage the supply can support. Access: Read Valid values: Represented in microvolts What: /sys/class/power_supply//voltage_min Date: January 2008 Contact: linux-pm@vger.kernel.org Description: Reports the minimum VBUS voltage the supply can support. Access: Read Valid values: Represented in microvolts What: /sys/class/power_supply//voltage_now Date: May 2007 Contact: linux-pm@vger.kernel.org Description: Reports the VBUS voltage supplied now. This value is generally read-only reporting, unless the 'online' state of the supply is set to be programmable, in which case this value can be set within the reported min/max range. Access: Read, Write Valid values: Represented in microvolts ===== Device Specific Properties ===== What: /sys/class/power/ds2760-battery.*/charge_now Date: May 2010 KernelVersion: 2.6.35 Contact: Daniel Mack Description: This file is writeable and can be used to set the current coloumb counter value inside the battery monitor chip. This is needed for unavoidable corrections of aging batteries. A userspace daemon can monitor the battery charging logic and once the counter drops out of considerable bounds, take appropriate action. What: /sys/class/power/ds2760-battery.*/charge_full Date: May 2010 KernelVersion: 2.6.35 Contact: Daniel Mack Description: This file is writeable and can be used to set the assumed battery 'full level'. As batteries age, this value has to be amended over time. What: /sys/class/power_supply/max14577-charger/device/fast_charge_timer Date: October 2014 KernelVersion: 3.18.0 Contact: Krzysztof Kozlowski Description: This entry shows and sets the maximum time the max14577 charger operates in fast-charge mode. When the timer expires the device will terminate fast-charge mode (charging current will drop to 0 A) and will trigger interrupt. Valid values: - 5, 6 or 7 (hours), - 0: disabled. What: /sys/class/power_supply/max77693-charger/device/fast_charge_timer Date: January 2015 KernelVersion: 3.19.0 Contact: Krzysztof Kozlowski Description: This entry shows and sets the maximum time the max77693 charger operates in fast-charge mode. When the timer expires the device will terminate fast-charge mode (charging current will drop to 0 A) and will trigger interrupt. Valid values: - 4 - 16 (hours), step by 2 (rounded down) - 0: disabled. What: /sys/class/power_supply/max77693-charger/device/top_off_threshold_current Date: January 2015 KernelVersion: 3.19.0 Contact: Krzysztof Kozlowski Description: This entry shows and sets the charging current threshold for entering top-off charging mode. When charging current in fast charge mode drops below this value, the charger will trigger interrupt and start top-off charging mode. Valid values: - 100000 - 200000 (microamps), step by 25000 (rounded down) - 200000 - 350000 (microamps), step by 50000 (rounded down) - 0: disabled. What: /sys/class/power_supply/max77693-charger/device/top_off_timer Date: January 2015 KernelVersion: 3.19.0 Contact: Krzysztof Kozlowski Description: This entry shows and sets the maximum time the max77693 charger operates in top-off charge mode. When the timer expires the device will terminate top-off charge mode (charging current will drop to 0 A) and will trigger interrupt. Valid values: - 0 - 70 (minutes), step by 10 (rounded down) What: /sys/class/power_supply/bq24257-charger/ovp_voltage Date: October 2015 KernelVersion: 4.4.0 Contact: Andreas Dannenberg Description: This entry configures the overvoltage protection feature of bq24257- type charger devices. This feature protects the device and other components against damage from overvoltage on the input supply. See device datasheet for details. Valid values: - 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000, 10500000 (all uV) What: /sys/class/power_supply/bq24257-charger/in_dpm_voltage Date: October 2015 KernelVersion: 4.4.0 Contact: Andreas Dannenberg Description: This entry configures the input dynamic power path management voltage of bq24257-type charger devices. Once the supply drops to the configured voltage, the input current limit is reduced down to prevent the further drop of the supply. When the IC enters this mode, the charge current is lower than the set value. See device datasheet for details. Valid values: - 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000, 4760000 (all uV) What: /sys/class/power_supply/bq24257-charger/high_impedance_enable Date: October 2015 KernelVersion: 4.4.0 Contact: Andreas Dannenberg Description: This entry allows enabling the high-impedance mode of bq24257-type charger devices. If enabled, it places the charger IC into low power standby mode with the switch mode controller disabled. When disabled, the charger operates normally. See device datasheet for details. Valid values: - 1: enabled - 0: disabled What: /sys/class/power_supply/bq24257-charger/sysoff_enable Date: October 2015 KernelVersion: 4.4.0 Contact: Andreas Dannenberg Description: This entry allows enabling the sysoff mode of bq24257-type charger devices. If enabled and the input is removed, the internal battery FET is turned off in order to reduce the leakage from the BAT pin to less than 1uA. Note that on some devices/systems this disconnects the battery from the system. See device datasheet for details. Valid values: - 1: enabled - 0: disabled