/* SPDX-License-Identifier: GPL-2.0-only */ /* * linux/arch/arm/lib/backtrace-clang.S * * Copyright (C) 2019 Nathan Huckleberry * */ #include #include #include .text /* fp is 0 or stack frame */ #define frame r4 #define sv_fp r5 #define sv_pc r6 #define mask r7 #define sv_lr r8 ENTRY(c_backtrace) #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) ret lr ENDPROC(c_backtrace) #else /* * Clang does not store pc or sp in function prologues so we don't know exactly * where the function starts. * * We can treat the current frame's lr as the saved pc and the preceding * frame's lr as the current frame's lr, but we can't trace the most recent * call. Inserting a false stack frame allows us to reference the function * called last in the stacktrace. * * If the call instruction was a bl we can look at the callers branch * instruction to calculate the saved pc. We can recover the pc in most cases, * but in cases such as calling function pointers we cannot. In this case, * default to using the lr. This will be some address in the function, but will * not be the function start. * * Unfortunately due to the stack frame layout we can't dump r0 - r3, but these * are less frequently saved. * * Stack frame layout: * * saved lr * frame=> saved fp * optionally saved caller registers (r4 - r10) * optionally saved arguments (r0 - r3) * * * * Functions start with the following code sequence: * corrected pc => stmfd sp!, {..., fp, lr} * add fp, sp, #x * stmfd sp!, {r0 - r3} (optional) * * * * * * * The diagram below shows an example stack setup for dump_stack. * * The frame for c_backtrace has pointers to the code of dump_stack. This is * why the frame of c_backtrace is used to for the pc calculation of * dump_stack. This is why we must move back a frame to print dump_stack. * * The stored locals for dump_stack are in dump_stack's frame. This means that * to fully print dump_stack's frame we need both the frame for dump_stack (for * locals) and the frame that was called by dump_stack (for pc). * * To print locals we must know where the function start is. If we read the * function prologue opcodes we can determine which variables are stored in the * stack frame. * * To find the function start of dump_stack we can look at the stored LR of * show_stack. It points at the instruction directly after the bl dump_stack. * We can then read the offset from the bl opcode to determine where the branch * takes us. The address calculated must be the start of dump_stack. * * c_backtrace frame dump_stack: * {[LR] } ============| ... * {[FP] } =======| | bl c_backtrace * | |=> ... * {[R4-R10]} | * {[R0-R3] } | show_stack: * dump_stack frame | ... * {[LR] } =============| bl dump_stack * {[FP] } <=======| |=> ... * {[R4-R10]} * {[R0-R3] } */ stmfd sp!, {r4 - r9, fp, lr} @ Save an extra register @ to ensure 8 byte alignment movs frame, r0 @ if frame pointer is zero beq no_frame @ we have no stack frames tst r1, #0x10 @ 26 or 32-bit mode? moveq mask, #0xfc000003 movne mask, #0 @ mask for 32-bit /* * Switches the current frame to be the frame for dump_stack. */ add frame, sp, #24 @ switch to false frame for_each_frame: tst frame, mask @ Check for address exceptions bne no_frame /* * sv_fp is the stack frame with the locals for the current considered * function. * * sv_pc is the saved lr frame the frame above. This is a pointer to a code * address within the current considered function, but it is not the function * start. This value gets updated to be the function start later if it is * possible. */ 1001: ldr sv_pc, [frame, #4] @ get saved 'pc' 1002: ldr sv_fp, [frame, #0] @ get saved fp teq sv_fp, mask @ make sure next frame exists beq no_frame /* * sv_lr is the lr from the function that called the current function. This is * a pointer to a code address in the current function's caller. sv_lr-4 is * the instruction used to call the current function. * * This sv_lr can be used to calculate the function start if the function was * called using a bl instruction. If the function start can be recovered sv_pc * is overwritten with the function start. * * If the current function was called using a function pointer we cannot * recover the function start and instead continue with sv_pc as an arbitrary * value within the current function. If this is the case we cannot print * registers for the current function, but the stacktrace is still printed * properly. */ 1003: ldr sv_lr, [sv_fp, #4] @ get saved lr from next frame 1007: ldr r0, [sv_lr, #-4] @ get call instruction ldr r3, .Lopcode+4 and r2, r3, r0 @ is this a bl call teq r2, r3 bne finished_setup @ give up if it's not and r0, #0xffffff @ get call offset 24-bit int lsl r0, r0, #8 @ sign extend offset asr r0, r0, #8 ldr sv_pc, [sv_fp, #4] @ get lr address add sv_pc, sv_pc, #-4 @ get call instruction address add sv_pc, sv_pc, #8 @ take care of prefetch add sv_pc, sv_pc, r0, lsl #2@ find function start finished_setup: bic sv_pc, sv_pc, mask @ mask PC/LR for the mode /* * Print the function (sv_pc) and where it was called from (sv_lr). */ 1004: mov r0, sv_pc mov r1, sv_lr mov r2, frame bic r1, r1, mask @ mask PC/LR for the mode bl dump_backtrace_entry /* * Test if the function start is a stmfd instruction to determine which * registers were stored in the function prologue. * * If we could not recover the sv_pc because we were called through a function * pointer the comparison will fail and no registers will print. Unwinding will * continue as if there had been no registers stored in this frame. */ 1005: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, lr} ldr r3, .Lopcode @ instruction exists, teq r3, r1, lsr #11 ldr r0, [frame] @ locals are stored in @ the preceding frame subeq r0, r0, #4 bleq dump_backtrace_stm @ dump saved registers /* * If we are out of frames or if the next frame is invalid. */ teq sv_fp, #0 @ zero saved fp means beq no_frame @ no further frames cmp sv_fp, frame @ next frame must be mov frame, sv_fp @ above the current frame bhi for_each_frame 1006: adr r0, .Lbad mov r1, frame bl printk no_frame: ldmfd sp!, {r4 - r9, fp, pc} ENDPROC(c_backtrace) .pushsection __ex_table,"a" .align 3 .long 1001b, 1006b .long 1002b, 1006b .long 1003b, 1006b .long 1004b, 1006b .long 1005b, 1006b .long 1007b, 1006b .popsection .Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n" .align .Lopcode: .word 0xe92d4800 >> 11 @ stmfd sp!, {... fp, lr} .word 0x0b000000 @ bl if these bits are set #endif