/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2019 MediaTek Inc. */ #include "ilitek_v3.h" #define PROTOCL_VER_NUM 8 static struct ilitek_protocol_info protocol_info[PROTOCL_VER_NUM] = { /* length -> fw, protocol, tp, key, panel, core, func, window, cdc, mp_info */ [0] = {PROTOCOL_VER_500, 4, 4, 14, 30, 5, 5, 2, 8, 3, 8}, [1] = {PROTOCOL_VER_510, 4, 3, 14, 30, 5, 5, 3, 8, 3, 8}, [2] = {PROTOCOL_VER_520, 4, 4, 14, 30, 5, 5, 3, 8, 3, 8}, [3] = {PROTOCOL_VER_530, 9, 4, 14, 30, 5, 5, 3, 8, 3, 8}, [4] = {PROTOCOL_VER_540, 9, 4, 14, 30, 5, 5, 3, 8, 15, 8}, [5] = {PROTOCOL_VER_550, 9, 4, 14, 30, 5, 5, 3, 8, 15, 14}, [6] = {PROTOCOL_VER_560, 9, 4, 14, 30, 5, 5, 3, 8, 15, 14}, [7] = {PROTOCOL_VER_570, 9, 4, 14, 30, 5, 5, 3, 8, 15, 14}, }; #define FUNC_CTRL_NUM 17 static struct ilitek_ic_func_ctrl func_ctrl[FUNC_CTRL_NUM] = { /* cmd[3] = cmd, func, ctrl */ // rec_state 0:disable, 1: enable, 2: ignore record [0] = {"sense", {0x1, 0x1, 0x0}, 3, 0x0, 2, 0xFF}, [1] = {"sleep", {0x1, 0x2, 0x0}, 3, 0x0, 2, 0xFF}, [2] = {"glove", {0x1, 0x6, 0x0}, 3, 0x0, 0, 0xFF}, [3] = {"stylus", {0x1, 0x7, 0x0}, 3, 0x0, 0, 0xFF}, [4] = {"lpwg", {0x1, 0xA, 0x0}, 3, 0x0, 2, 0xFF}, [5] = {"proximity", {0x1, 0x10, 0x0}, 3, 0x0, 2, 0xFF}, [6] = {"plug", {0x1, 0x11, 0x0}, 3, 0x1, 0, 0xFF}, [7] = {"edge_palm", {0x1, 0x12, 0x0}, 3, 0x1, 0, 0xFF}, [8] = {"lock_point", {0x1, 0x13, 0x0}, 3, 0x0, 0, 0xFF}, [9] = {"active", {0x1, 0x14, 0x0}, 3, 0x0, 2, 0xFF}, [10] = {"idle", {0x1, 0x19, 0x0}, 3, 0x1, 0, 0xFF}, [11] = {"gesture_demo_en", {0x1, 0x16, 0x0}, 3, 0x0, 0, 0xFF}, [12] = {"tp_recore", {0x1, 0x18, 0x0}, 3, 0x0, 2, 0xFF}, [13] = {"knock_en", {0x1, 0xA, 0x8, 0x03, 0x0, 0x0}, 6, 0xFF, 0, 0xFF}, [14] = {"int_trigger", {0x1, 0x1B, 0x0}, 3, 0x0, 2, 0xFF}, [15] = {"ear_phone", {0x1, 0x17, 0x0}, 3, 0x0, 0, 0xFF}, [15] = {"knuckle", {0x1, 0xF, 0x0}, 3, 0x0, 0, 0xFF}, }; #define CHIP_SUP_NUM 5 static u32 ic_sup_list[CHIP_SUP_NUM] = { [0] = ILI9881_CHIP, [1] = ILI7807_CHIP, [2] = ILI9881N_AA, [3] = ILI9881O_AA, [4] = ILI9882_CHIP }; #ifdef ROI int ili_config_knuckle_roi_ctrl(cmd_types cmd) { int ret = 0; switch (cmd) { case CMD_DISABLE: ILI_DBG("knuckle roi disbale\n"); ret = ili_ic_func_ctrl("knuckle", cmd); break; case CMD_ENABLE: ILI_DBG("knuckle roi enable\n"); ret = ili_ic_func_ctrl("knuckle", cmd); break; case CMD_STATUS: ILI_DBG("knuckle roi read status\n"); ret = ili_ic_func_ctrl("knuckle", cmd); break; case CMD_ROI_DATA: ILI_DBG("knuckle roi read data\n"); ret = ili_ic_func_ctrl("knuckle", cmd); break; default: ILI_ERR("knuckle roi unknown cmd: %d\n", cmd); return -EINVAL; } return ret; } int ili_config_get_knuckle_roi_status(void) { int ret = 0; u8 roi_status = 0; ret = ili_config_knuckle_roi_ctrl(CMD_STATUS); if (ret) { ILI_ERR("config to read roi status failed\n"); return ret; } msleep(1); ret = ilits->wrapper(NULL, 0, &roi_status, sizeof(roi_status), OFF, OFF); if (ret) { ILI_ERR("read data failed\n"); return ret; } ILI_INFO("roi %s\n", roi_status ? "enable" : "disable"); return roi_status; } #endif static int ilitek_tddi_ic_check_support(u32 pid, u16 id) { int i = 0; for (i = 0; i < CHIP_SUP_NUM; i++) { if ((pid == ic_sup_list[i]) || (id == ic_sup_list[i])) break; } if (i >= CHIP_SUP_NUM) { ILI_INFO("ERROR, ILITEK CHIP(0x%x) Not found !!\n", pid); } ILI_INFO("ILITEK CHIP found.\n"); ilits->chip->pid = pid; ilits->chip->reset_key = 0x00019878; ilits->chip->wtd_key = 0x9881; if (((pid & 0xFFFFFF00) == ILI9881N_AA) || ((pid & 0xFFFFFF00) == ILI9881O_AA)) { ilits->chip->dma_reset = ENABLE; } else { ilits->chip->dma_reset = DISABLE; } ilits->chip->no_bk_shift = RAWDATA_NO_BK_SHIFT; ilits->chip->max_count = 0x1FFFF; return 0; } int ili_ice_mode_bit_mask_write(u32 addr, u32 mask, u32 value) { int ret = 0; u32 data = 0; if (ili_ice_mode_read(addr, &data, sizeof(u32)) < 0) { ILI_ERR("Read data error\n"); return -1; } data &= (~mask); data |= (value & mask); ILI_DBG("mask value data = %x\n", data); ret = ili_ice_mode_write(addr, data, sizeof(u32)); if (ret < 0) ILI_ERR("Failed to re-write data in ICE mode, ret = %d\n", ret); return ret; } int ili_ice_mode_write(u32 addr, u32 data, int len) { int ret = 0, i; u8 txbuf[64] = {0}; if (!atomic_read(&ilits->ice_stat)) { ILI_ERR("ice mode not enabled\n"); return -1; } txbuf[0] = 0x25; txbuf[1] = (char)((addr & 0x000000FF) >> 0); txbuf[2] = (char)((addr & 0x0000FF00) >> 8); txbuf[3] = (char)((addr & 0x00FF0000) >> 16); for (i = 0; i < len; i++) txbuf[i + 4] = (char)(data >> (8 * i)); ret = ilits->wrapper(txbuf, len + 4, NULL, 0, OFF, OFF); if (ret < 0) ILI_ERR("Failed to write data in ice mode, ret = %d\n", ret); return ret; } int ili_ice_mode_read(u32 addr, u32 *data, int len) { int ret = 0; u8 *rxbuf = NULL; u8 txbuf[4] = {0}; if (!atomic_read(&ilits->ice_stat)) { ILI_ERR("ice mode not enabled\n"); return -1; } txbuf[0] = 0x25; txbuf[1] = (char)((addr & 0x000000FF) >> 0); txbuf[2] = (char)((addr & 0x0000FF00) >> 8); txbuf[3] = (char)((addr & 0x00FF0000) >> 16); ret = ilits->wrapper(txbuf, sizeof(txbuf), NULL, 0, OFF, OFF); if (ret < 0) goto out; rxbuf = kcalloc(len, sizeof(u8), GFP_KERNEL); if (ERR_ALLOC_MEM(rxbuf)) { ILI_ERR("Failed to allocate rxbuf, %ld\n", PTR_ERR(rxbuf)); ret = -ENOMEM; goto out; } ret = ilits->wrapper(NULL, 0, rxbuf, len, OFF, OFF); if (ret < 0) goto out; if (len == sizeof(u8)) *data = rxbuf[0]; else *data = (rxbuf[0] | rxbuf[1] << 8 | rxbuf[2] << 16 | rxbuf[3] << 24); out: if (ret < 0) ILI_ERR("Failed to read data in ice mode, ret = %d\n", ret); ipio_kfree((void **)&rxbuf); return ret; } int ili_ice_mode_ctrl(bool enable, bool mcu) { int ret = 0; u8 cmd_open[4] = {0x25, 0x62, 0x10, 0x18}; u8 cmd_close[4] = {0x1B, 0x62, 0x10, 0x18}; ILI_INFO("%s ICE mode, mcu on = %d\n", (enable ? "Enable" : "Disable"), mcu); if (enable) { if (atomic_read(&ilits->ice_stat)) { ILI_INFO("ice mode already enabled\n"); return 0; } if (mcu) cmd_open[0] = 0x1F; atomic_set(&ilits->ice_stat, ENABLE); if (ilits->wrapper(cmd_open, sizeof(cmd_open), NULL, 0, OFF, OFF) < 0) { ILI_ERR("write ice mode cmd error\n"); atomic_set(&ilits->ice_stat, DISABLE); } ilits->pll_clk_wakeup = false; #if (TDDI_INTERFACE == BUS_I2C) if (ili_ice_mode_write(FLASH_BASED_ADDR, 0x1, 1) < 0) ILI_ERR("Write cs high failed\n"); /* CS high */ #endif } else { if (!atomic_read(&ilits->ice_stat)) { ILI_INFO("ice mode already disabled\n"); return 0; } ret = ilits->wrapper(cmd_close, sizeof(cmd_close), NULL, 0, OFF, OFF); if (ret < 0) { ILI_ERR("Exit to ICE Mode failed !!\n"); atomic_set(&ilits->ice_stat, ENABLE); } else { atomic_set(&ilits->ice_stat, DISABLE); ilits->pll_clk_wakeup = true; } } return ret; } void ili_ic_edge_palm_para_init(void) { #if ENABLE_EDGE_PALM_PARA int i; ilits->edge_palm_para[0] = P5_X_EDGE_PLAM_CTRL_1; ilits->edge_palm_para[1] = P5_X_EDGE_PALM_TUNING_PARA; ilits->edge_palm_para[2] = (ZONE_A_W & 0xFF00) >> 8; ilits->edge_palm_para[3] = ZONE_A_W & 0xFF; ilits->edge_palm_para[4] = (ZONE_B_W & 0xFF00) >> 8; ilits->edge_palm_para[5] = ZONE_B_W & 0xFF; ilits->edge_palm_para[6] = (ZONE_A_ROTATION_W & 0xFF00) >> 8; ilits->edge_palm_para[7] = ZONE_A_ROTATION_W & 0xFF; ilits->edge_palm_para[8] = (ZONE_B_ROTATION_W & 0xFF00) >> 8; ilits->edge_palm_para[9] = ZONE_B_ROTATION_W & 0xFF; ilits->edge_palm_para[10] = (ZONE_C_WIDTH & 0xFF00) >> 8; ilits->edge_palm_para[11] = ZONE_C_WIDTH & 0xFF; ilits->edge_palm_para[12] = (ZONE_C_HEIGHT & 0xFF00) >> 8; ilits->edge_palm_para[13] = ZONE_C_HEIGHT & 0xFF; ilits->edge_palm_para[14] = (ZONE_C_HEIGHT_LITTLE & 0xFF00) >> 8; ilits->edge_palm_para[15] = ZONE_C_HEIGHT_LITTLE & 0xFF; ilits->edge_palm_para[16] = (ZONE_A_W & 0xFF00) >> 8; ilits->edge_palm_para[17] = ZONE_A_W & 0xFF; ilits->edge_palm_para[18] = (ZONE_B_W & 0xFF00) >> 8; ilits->edge_palm_para[19] = ZONE_B_W & 0xFF; ilits->edge_palm_para[20] = (ZONE_A_ROTATION_W & 0xFF00) >> 8; ilits->edge_palm_para[21] = ZONE_A_ROTATION_W & 0xFF; ilits->edge_palm_para[22] = (ZONE_B_ROTATION_W & 0xFF00) >> 8; ilits->edge_palm_para[23] = ZONE_B_ROTATION_W & 0xFF; ilits->edge_palm_para[24] = (ZONE_C_WIDTH & 0xFF00) >> 8; ilits->edge_palm_para[25] = ZONE_C_WIDTH & 0xFF; ilits->edge_palm_para[26] = (ZONE_C_HEIGHT & 0xFF00) >> 8; ilits->edge_palm_para[27] = ZONE_C_HEIGHT & 0xFF; ilits->edge_palm_para[28] = (ZONE_C_HEIGHT_LITTLE & 0xFF00) >> 8; ilits->edge_palm_para[29] = ZONE_C_HEIGHT_LITTLE & 0xFF; ilits->edge_palm_para[30] = ili_calc_packet_checksum(ilits->edge_palm_para, P5_X_EDGE_PALM_PARA_LENGTH - 1); for (i = 0; i < P5_X_EDGE_PALM_PARA_LENGTH; i++) { ILI_DBG("edge_palm_para[%d] = 0x%2x\n", i, ilits->edge_palm_para[i]); } #endif } void ili_ic_send_edge_palm_para(void) { #if ENABLE_EDGE_PALM_PARA int ret = 0; ILI_INFO("send edge palm para\n"); ret = ilits->wrapper(ilits->edge_palm_para, P5_X_EDGE_PALM_PARA_LENGTH, NULL, 0, OFF, OFF); if (ret < 0) ILI_ERR("Write edge palm para function failed\n"); #endif } int ili_ic_func_ctrl(const char *name, int ctrl) { int i = 0, ret; for (i = 0; i < FUNC_CTRL_NUM; i++) { if (ipio_strcmp(name, func_ctrl[i].name) == 0) { if (strlen(name) != strlen(func_ctrl[i].name)) continue; break; } } if (i >= FUNC_CTRL_NUM) { ILI_ERR("Not found function ctrl, %s\n", name); ret = -1; goto out; } if (ilits->protocol->ver == PROTOCOL_VER_500) { ILI_ERR("Non support function ctrl with protocol v5.0\n"); ret = -1; goto out; } if (ilits->protocol->ver >= PROTOCOL_VER_560) { if (ipio_strcmp(func_ctrl[i].name, "gesture") == 0 || ipio_strcmp(func_ctrl[i].name, "phone_cover_window") == 0) { ILI_INFO("Non support %s function ctrl\n", func_ctrl[i].name); ret = -1; goto out; } } func_ctrl[i].cmd[2] = ctrl; ILI_INFO("func = %s, len = %d, cmd = 0x%x, 0%x, 0x%x\n", func_ctrl[i].name, func_ctrl[i].len, func_ctrl[i].cmd[0], func_ctrl[i].cmd[1], func_ctrl[i].cmd[2]); ret = ilits->wrapper(func_ctrl[i].cmd, func_ctrl[i].len, NULL, 0, OFF, OFF); if (ret < 0) ILI_ERR("Write TP function failed\n"); if (func_ctrl[i].rec_state < 2) { if (ctrl == func_ctrl[i].def_cmd) func_ctrl[i].rec_state = DISABLE; else func_ctrl[i].rec_state = ENABLE; func_ctrl[i].rec_cmd = ctrl; } ILI_DBG("record %s func cmd %d, rec_state %d\n", func_ctrl[i].name, func_ctrl[i].rec_cmd, func_ctrl[i].rec_state); out: return ret; } void ili_ic_func_ctrl_reset(void) { int i = 0; ili_ic_send_edge_palm_para(); for (i = 0; i < FUNC_CTRL_NUM; i++) { if (func_ctrl[i].rec_state == ENABLE) { ILI_DBG("reset func ctrl %s, record status = %d, cmd = %d\n", func_ctrl[i].name, func_ctrl[i].rec_state, func_ctrl[i].rec_cmd); if (ili_ic_func_ctrl(func_ctrl[i].name, func_ctrl[i].rec_cmd) < 0) ILI_ERR("reset ic func ctrl %s failed\n", func_ctrl[i].name); } } } int ili_ic_code_reset(bool mcu) { int ret; bool ice = atomic_read(&ilits->ice_stat); if (!ice) if (ili_ice_mode_ctrl(ENABLE, mcu) < 0) ILI_ERR("Enable ice mode failed before code reset\n"); ret = ili_ice_mode_write(0x40040, 0xAE, 1); if (ret < 0) ILI_ERR("ic code reset failed\n"); if (!ice) if (ili_ice_mode_ctrl(DISABLE, mcu) < 0) ILI_ERR("Enable ice mode failed after code reset\n"); return ret; } int ili_ic_whole_reset(bool mcu) { int ret = 0; bool ice = atomic_read(&ilits->ice_stat); if (!ice) if (ili_ice_mode_ctrl(ENABLE, mcu) < 0) ILI_ERR("Enable ice mode failed before chip reset\n"); ILI_INFO("ic whole reset key = 0x%x, edge_delay = %d\n", ilits->chip->reset_key, ilits->rst_edge_delay); ret = ili_ice_mode_write(ilits->chip->reset_addr, ilits->chip->reset_key, sizeof(u32)); if (ret < 0) { ILI_ERR("ic whole reset failed\n"); goto out; } /* Need accurate power sequence, do not change it to msleep */ mdelay(ilits->rst_edge_delay); out: if (!ice) if (ili_ice_mode_ctrl(DISABLE, OFF) < 0) ILI_ERR("Enable ice mode failed after chip reset\n"); return ret; } static void ilitek_tddi_ic_wr_pack(int packet) { int retry = 100; u32 reg_data = 0; while (retry--) { if (ili_ice_mode_read(0x73010, ®_data, sizeof(u8)) < 0) ILI_ERR("Read 0x73010 error\n"); if ((reg_data & 0x02) == 0) { ILI_INFO("check ok 0x73010 read 0x%X retry = %d\n", reg_data, retry); break; } mdelay(10); } if (retry <= 0) ILI_INFO("check 0x73010 error read 0x%X\n", reg_data); if (ili_ice_mode_write(0x73000, packet, 4) < 0) ILI_ERR("Write %x at 0x73000\n", packet); } static u32 ilitek_tddi_ic_rd_pack(int packet) { int retry = 100; u32 reg_data = 0; ilitek_tddi_ic_wr_pack(packet); while (retry--) { if (ili_ice_mode_read(0x4800A, ®_data, sizeof(u8)) < 0) ILI_ERR("Read 0x4800A error\n"); if ((reg_data & 0x02) == 0x02) { ILI_INFO("check ok 0x4800A read 0x%X retry = %d\n", reg_data, retry); break; } mdelay(10); } if (retry <= 0) ILI_INFO("check 0x4800A error read 0x%X\n", reg_data); if (ili_ice_mode_write(0x4800A, 0x02, 1) < 0) ILI_ERR("Write 0x2 at 0x4800A\n"); if (ili_ice_mode_read(0x73016, ®_data, sizeof(u8)) < 0) ILI_ERR("Read 0x73016 error\n"); return reg_data; } void ili_ic_set_ddi_reg_onepage(u8 page, u8 reg, u8 data, bool mcu) { u32 setpage = 0x1FFFFF00 | page; u32 setreg = 0x1F000100 | (reg << 16) | data; bool ice = atomic_read(&ilits->ice_stat); ILI_INFO("setpage = 0x%X setreg = 0x%X\n", setpage, setreg); if (!ice) if (ili_ice_mode_ctrl(ENABLE, mcu) < 0) ILI_ERR("Enable ice mode failed before writing ddi reg\n"); /*TDI_WR_KEY*/ ilitek_tddi_ic_wr_pack(0x1FFF9527); /*Switch to Page*/ ilitek_tddi_ic_wr_pack(setpage); /* Page*/ ilitek_tddi_ic_wr_pack(setreg); /*TDI_WR_KEY OFF*/ ilitek_tddi_ic_wr_pack(0x1FFF9500); if (!ice) if (ili_ice_mode_ctrl(DISABLE, mcu) < 0) ILI_ERR("Disable ice mode failed after writing ddi reg\n"); } void ili_ic_get_ddi_reg_onepage(u8 page, u8 reg, u8 *data, bool mcu) { u32 setpage = 0x1FFFFF00 | page; u32 setreg = 0x2F000100 | (reg << 16); bool ice = atomic_read(&ilits->ice_stat); ILI_INFO("setpage = 0x%X setreg = 0x%X\n", setpage, setreg); if (!ice) if (ili_ice_mode_ctrl(ENABLE, mcu) < 0) ILI_ERR("Enable ice mode failed before reading ddi reg\n"); /*TDI_WR_KEY*/ ilitek_tddi_ic_wr_pack(0x1FFF9527); /*Set Read Page reg*/ ilitek_tddi_ic_wr_pack(setpage); /*TDI_RD_KEY*/ ilitek_tddi_ic_wr_pack(0x1FFF9487); /*( *( __IO uint8 *) (0x4800A) ) =0x2*/ if (ili_ice_mode_write(0x4800A, 0x02, 1) < 0) ILI_ERR("Write 0x2 at 0x4800A\n"); *data = ilitek_tddi_ic_rd_pack(setreg); ILI_INFO("check page = 0x%X, reg = 0x%X, read 0x%X\n", page, reg, *data); /*TDI_RD_KEY OFF*/ ilitek_tddi_ic_wr_pack(0x1FFF9400); /*TDI_WR_KEY OFF*/ ilitek_tddi_ic_wr_pack(0x1FFF9500); if (!ice) if (ili_ice_mode_ctrl(DISABLE, mcu) < 0) ILI_ERR("Disable ice mode failed after reading ddi reg\n"); } void ili_ic_get_pc_counter(int stat) { bool ice = atomic_read(&ilits->ice_stat); u32 pc = 0, pc_addr = ilits->chip->pc_counter_addr; u32 latch = 0, latch_addr = ilits->chip->pc_latch_addr; int ret = 0; ILI_DBG("stat = %d\n", stat); if (!ice) { if (stat == DO_SPI_RECOVER || stat == DO_I2C_RECOVER) ret = ili_ice_mode_ctrl(ENABLE, OFF); else ret = ili_ice_mode_ctrl(ENABLE, ON); if (ret < 0) ILI_ERR("Enable ice mode failed while reading pc counter\n"); } if (ili_ice_mode_read(ilits->chip->pc_counter_addr, &pc, sizeof(u32)) < 0) ILI_ERR("Read pc conter error\n"); if (ili_ice_mode_read(ilits->chip->pc_latch_addr, &latch, sizeof(u32)) < 0) ILI_ERR("Read pc latch error\n"); ilits->fw_pc = pc; ilits->fw_latch = latch; ILI_ERR("Read counter (addr: 0x%x) = 0x%x, latch (addr: 0x%x) = 0x%x\n", pc_addr, ilits->fw_pc, latch_addr, ilits->fw_latch); /* Avoid screen abnormal. */ if (stat == DO_SPI_RECOVER) { atomic_set(&ilits->ice_stat, DISABLE); return; } if (!ice) { if (ili_ice_mode_ctrl(DISABLE, ON) < 0) ILI_ERR("Disable ice mode failed while reading pc counter\n"); } } int ili_ic_int_trigger_ctrl(bool pulse) { /* It's supported by fw, and the level will be kept at high until data was already prepared. */ if (ili_ic_func_ctrl("int_trigger", pulse) < 0) { ILI_ERR("Write CMD error, set back to <%s> trigger\n", ilits->int_pulse ? "Level" : "Pulse"); return -1; } ilits->int_pulse = pulse; ILI_INFO("INT Trigger = %s\n", ilits->int_pulse ? "Level" : "Pulse"); return 0; } int ili_ic_check_int_level(bool level) { int timer = 3000; int gpio = IRQ_GPIO_NUM; //ilits->tp_int /* * If callers have a trouble to use the gpio that is passed by vendors, * please utlises a physical gpio number instead or call a help from them. */ while (--timer > 0) { if (level) { if (gpio_get_value(gpio)) { ILI_DBG("INT high detected.\n"); return 0; } } else { if (!gpio_get_value(gpio)) { ILI_DBG("INT low detected.\n");; return 0; } } mdelay(1); } ILI_ERR("Error! INT level no detected.\n"); return -1; } int ili_ic_check_int_pulse(bool pulse) { if (!wait_event_interruptible_timeout(ilits->inq, !atomic_read(&ilits->cmd_int_check), msecs_to_jiffies(ilits->wait_int_timeout))) { ILI_ERR("Error! INT pulse no detected. Timeout = %d ms\n", ilits->wait_int_timeout); atomic_set(&ilits->cmd_int_check, DISABLE); return -1; } ILI_DBG("INT pulse detected.\n"); return 0; } int ili_ic_check_busy(int count, int delay, bool irq) { u8 cmd[2] = {0}; u8 busy = 0, rby = 0; cmd[0] = P5_X_READ_DATA_CTRL; cmd[1] = P5_X_CDC_BUSY_STATE; if (ilits->actual_tp_mode == P5_X_FW_AP_MODE) rby = 0x41; else if (ilits->actual_tp_mode == P5_X_FW_TEST_MODE) rby = 0x51; else { ILI_ERR("Unknown TP mode (0x%x)\n", ilits->actual_tp_mode); return -EINVAL; } ILI_INFO("read byte = %x, delay = %d\n", rby, delay); do { if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) ILI_ERR("Write check busy cmd failed\n"); if (ilits->wrapper(&cmd[1], sizeof(u8), &busy, sizeof(u8), irq, OFF) < 0) ILI_ERR("Read check busy failed\n"); ILI_DBG("busy = 0x%x\n", busy); if (busy == rby) { ILI_INFO("Check busy free\n"); return 0; } mdelay(delay); } while (--count > 0); ILI_ERR("Check busy (0x%x) timeout !\n", busy); ili_ic_get_pc_counter(0); return -1; } int ili_ic_get_project_id(u8 *pdata, int size) { int i; u32 tmp; bool ice = atomic_read(&ilits->ice_stat); if (!pdata) { ILI_ERR("pdata is null\n"); return -ENOMEM; } ILI_INFO("Read size = %d\n", size); if (!ice) if (ili_ice_mode_ctrl(ENABLE, OFF) < 0) ILI_ERR("Enable ice mode failed while reading project id\n"); if (ili_ice_mode_write(0x041000, 0x0, 1) < 0) ILI_ERR("Pull cs low failed\n"); if (ili_ice_mode_write(0x041004, 0x66aa55, 3) < 0) ILI_ERR("Write key failed\n"); if (ili_ice_mode_write(0x041008, 0x03, 1) < 0) ILI_ERR("Write 0x03 at 0x041008\n"); if (ili_ice_mode_write(0x041008, (RSV_BK_ST_ADDR & 0xFF0000) >> 16, 1) < 0) ILI_ERR("Write address failed\n"); if (ili_ice_mode_write(0x041008, (RSV_BK_ST_ADDR & 0x00FF00) >> 8, 1) < 0) ILI_ERR("Write address failed\n"); if (ili_ice_mode_write(0x041008, (RSV_BK_ST_ADDR & 0x0000FF), 1) < 0) ILI_ERR("Write address failed\n"); for (i = 0; i < size; i++) { if (ili_ice_mode_write(0x041008, 0xFF, 1) < 0) ILI_ERR("Write dummy failed\n"); if (ili_ice_mode_read(0x41010, &tmp, sizeof(u8)) < 0) ILI_ERR("Read project id error\n"); pdata[i] = tmp; ILI_INFO("project_id[%d] = 0x%x\n", i, pdata[i]); } ili_flash_clear_dma(); if (ili_ice_mode_write(0x041000, 0x1, 1) < 0) ILI_ERR("Pull cs high\n"); if (!ice) if (ili_ice_mode_ctrl(DISABLE, OFF) < 0) ILI_ERR("Disable ice mode failed while reading project id\n"); return 0; } int ili_ic_get_core_ver(void) { int i = 0, ret = 0; u8 cmd[2] = {0}, buf[10] = {0}; ilits->protocol->core_ver_len = P5_X_CORE_VER_FOUR_LENGTH; if (ilits->info_from_hex) { buf[1] = ilits->fw_info[68]; buf[2] = ilits->fw_info[69]; buf[3] = ilits->fw_info[70]; buf[4] = ilits->fw_info[71]; goto out; } do { if (i == 0) { cmd[0] = P5_X_READ_DATA_CTRL; cmd[1] = P5_X_GET_CORE_VERSION_NEW; } else { cmd[0] = P5_X_READ_DATA_CTRL; cmd[1] = P5_X_GET_CORE_VERSION; ilits->protocol->core_ver_len = P5_X_CORE_VER_THREE_LENGTH; } if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) ILI_ERR("Write core ver cmd failed\n"); if (ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->core_ver_len, ON, OFF) < 0) ILI_ERR("Write core ver (0x%x) failed\n", cmd[1]); ILI_DBG("header = 0x%x\n", buf[0]); if (buf[0] == P5_X_GET_CORE_VERSION || buf[0] == P5_X_GET_CORE_VERSION_NEW) break; } while (++i < 2); if (buf[0] == P5_X_GET_CORE_VERSION) buf[4] = 0; if (i >= 2) { ILI_ERR("Invalid header (0x%x)\n", buf[0]); ret = -EINVAL; } out: ILI_INFO("Core version = %d.%d.%d.%d\n", buf[1], buf[2], buf[3], buf[4]); ilits->chip->core_ver = buf[1] << 24 | buf[2] << 16 | buf[3] << 8 | buf[4]; return ret; } void ili_fw_uart_ctrl(u8 ctrl) { u8 cmd[4] = {0}; if (ctrl > 1) { ILI_INFO("Unknown cmd, ignore\n"); return; } ILI_INFO("%s UART mode\n", ctrl ? "Enable" : "Disable"); cmd[0] = P5_X_I2C_UART; cmd[1] = 0x3; cmd[2] = 0; cmd[3] = ctrl; if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) { ILI_INFO("Write fw uart cmd failed\n"); return; } } int ili_ic_get_fw_ver(void) { int ret = 0; u8 cmd[2] = {0}; u8 buf[10] = {0}; if (ilits->info_from_hex) { buf[1] = ilits->fw_info[48]; buf[2] = ilits->fw_info[49]; buf[3] = ilits->fw_info[50]; buf[4] = ilits->fw_info[51]; buf[5] = ilits->fw_mp_ver[0]; buf[6] = ilits->fw_mp_ver[1]; buf[7] = ilits->fw_mp_ver[2]; buf[8] = ilits->fw_mp_ver[3]; goto out; } cmd[0] = P5_X_READ_DATA_CTRL; cmd[1] = P5_X_GET_FW_VERSION; if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) { ILI_ERR("Write pre cmd failed\n"); ret = -EINVAL; goto out; } if (ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->fw_ver_len, ON, OFF) < 0) { ILI_ERR("Write fw version cmd failed\n"); ret = -EINVAL; goto out; } if (buf[0] != P5_X_GET_FW_VERSION) { ILI_ERR("Invalid firmware ver\n"); ret = -1; } out: ILI_INFO("Firmware version = %d.%d.%d.%d\n", buf[1], buf[2], buf[3], buf[4]); ILI_INFO("Firmware MP version = %d.%d.%d.%d\n", buf[5], buf[6], buf[7], buf[8]); ilits->chip->fw_ver = buf[1] << 24 | buf[2] << 16 | buf[3] << 8 | buf[4]; ilits->chip->fw_mp_ver = buf[5] << 24 | buf[6] << 16 | buf[7] << 8 | buf[8]; return ret; } int ili_ic_get_panel_info(void) { int ret = 0; u8 cmd = P5_X_GET_PANEL_INFORMATION; u8 buf[10] = {0}; u8 len = ilits->protocol->panel_info_len; if (ilits->info_from_hex && (ilits->chip->core_ver >= CORE_VER_1410)) { buf[1] = ilits->fw_info[16]; buf[2] = ilits->fw_info[17]; buf[3] = ilits->fw_info[18]; buf[4] = ilits->fw_info[19]; ilits->panel_wid = buf[2] << 8 | buf[1]; ilits->panel_hei = buf[4] << 8 | buf[3]; ilits->trans_xy = (ilits->chip->core_ver >= CORE_VER_1430 && (ilits->rib.nReportByPixel > 0)) ? ON : OFF; goto out; } len = (ilits->chip->core_ver >= CORE_VER_1430) ? 6 : len; ret = ilits->wrapper(&cmd, sizeof(cmd), buf, len, ON, OFF); if (ret < 0) ILI_ERR("Read panel info error\n"); if (buf[0] != cmd) { ILI_INFO("Invalid panel info, use default resolution\n"); ilits->panel_wid = TOUCH_SCREEN_X_MAX; ilits->panel_hei = TOUCH_SCREEN_Y_MAX; ilits->trans_xy = OFF; } else { ilits->panel_wid = buf[1] << 8 | buf[2]; ilits->panel_hei = buf[3] << 8 | buf[4]; ilits->trans_xy = (ilits->chip->core_ver >= CORE_VER_1430) ? buf[5] : OFF; } out: ILI_INFO("Panel info: width = %d, height = %d\n", ilits->panel_wid, ilits->panel_hei); ILI_INFO("Transfer touch coordinate = %s\n", ilits->trans_xy ? "ON" : "OFF"); return ret; } int ili_ic_get_tp_info(void) { int ret = 0; u8 cmd[2] = {0}; u8 buf[20] = {0}; if (ilits->info_from_hex && (ilits->chip->core_ver >= CORE_VER_1410)) { buf[1] = ilits->fw_info[5]; buf[2] = ilits->fw_info[7]; buf[3] = ilits->fw_info[8]; buf[4] = ilits->fw_info[9]; buf[5] = ilits->fw_info[10]; buf[6] = ilits->fw_info[11]; buf[7] = ilits->fw_info[12]; buf[8] = ilits->fw_info[14]; buf[11] = buf[7]; buf[12] = buf[8]; goto out; } cmd[0] = P5_X_READ_DATA_CTRL; cmd[1] = P5_X_GET_TP_INFORMATION; if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) { ILI_ERR("Write tp info pre cmd failed\n"); ret = -EINVAL; goto out; } ret = ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->tp_info_len, ON, OFF); if (ret < 0) { ILI_ERR("Read tp info error\n"); goto out; } if (buf[0] != P5_X_GET_TP_INFORMATION) { ILI_ERR("Invalid tp info\n"); ret = -1; goto out; } out: ilits->min_x = buf[1]; ilits->min_y = buf[2]; ilits->max_x = buf[4] << 8 | buf[3]; ilits->max_y = buf[6] << 8 | buf[5]; ilits->xch_num = buf[7]; ilits->ych_num = buf[8]; ilits->stx = buf[11]; ilits->srx = buf[12]; ILI_INFO("TP Info: min_x = %d, min_y = %d, max_x = %d, max_y = %d\n", ilits->min_x, ilits->min_y, ilits->max_x, ilits->max_y); ILI_INFO("TP Info: xch = %d, ych = %d, stx = %d, srx = %d\n", ilits->xch_num, ilits->ych_num, ilits->stx, ilits->srx); return ret; } static void ilitek_tddi_ic_check_protocol_ver(u32 pver) { int i = 0; if (ilits->protocol->ver == pver) { ILI_DBG("same procotol version, do nothing\n"); return; } for (i = 0; i < PROTOCL_VER_NUM - 1; i++) { if (protocol_info[i].ver == pver) { ilits->protocol = &protocol_info[i]; ILI_INFO("update protocol version = %x\n", ilits->protocol->ver); return; } } ILI_ERR("Not found a correct protocol version in list, use newest version\n"); ilits->protocol = &protocol_info[PROTOCL_VER_NUM - 1]; } int ili_ic_get_protocl_ver(void) { int ret = 0; u8 cmd[2] = {0}; u8 buf[10] = {0}; u32 ver; if (ilits->info_from_hex) { buf[1] = ilits->fw_info[72]; buf[2] = ilits->fw_info[73]; buf[3] = ilits->fw_info[74]; goto out; } cmd[0] = P5_X_READ_DATA_CTRL; cmd[1] = P5_X_GET_PROTOCOL_VERSION; if (ilits->wrapper(cmd, sizeof(cmd), NULL, 0, OFF, OFF) < 0) { ILI_ERR("Write protocol ver pre cmd failed\n"); ret = -EINVAL; goto out; } if (ilits->wrapper(&cmd[1], sizeof(u8), buf, ilits->protocol->pro_ver_len, ON, OFF) < 0) { ILI_ERR("Read protocol version error\n"); ret = -EINVAL; goto out; } if (buf[0] != P5_X_GET_PROTOCOL_VERSION) { ILI_ERR("Invalid protocol ver\n"); ret = -1; goto out; } out: ver = buf[1] << 16 | buf[2] << 8 | buf[3]; ilitek_tddi_ic_check_protocol_ver(ver); ILI_INFO("Protocol version = %d.%d.%d\n", ilits->protocol->ver >> 16, (ilits->protocol->ver >> 8) & 0xFF, ilits->protocol->ver & 0xFF); return ret; } int ili_ic_get_info(void) { int ret = 0; if (!atomic_read(&ilits->ice_stat)) { ILI_ERR("ice mode doesn't enable\n"); return -1; } if (ili_ice_mode_read(ilits->chip->pid_addr, &ilits->chip->pid, sizeof(u32)) < 0) ILI_ERR("Read chip pid error\n"); if (ili_ice_mode_read(ilits->chip->otp_addr, &ilits->chip->otp_id, sizeof(u32)) < 0) ILI_ERR("Read otp id error\n"); if (ili_ice_mode_read(ilits->chip->ana_addr, &ilits->chip->ana_id, sizeof(u32)) < 0) ILI_ERR("Read ana id error\n"); ilits->chip->pid = ilits->chip->pid; ilits->chip->id = ilits->chip->pid >> 16; ilits->chip->type = (ilits->chip->pid & 0x0000FF00) >> 8; ilits->chip->ver = ilits->chip->pid & 0xFF; ilits->chip->otp_id &= 0xFF; ilits->chip->ana_id &= 0xFF; ILI_INFO("CHIP: PID = %x\n", (ilits->chip->pid >> 8)); ret = ilitek_tddi_ic_check_support(ilits->chip->pid, ilits->chip->id); return ret; } int ili_ic_dummy_check(void) { int ret = 0; u32 wdata = 0xA55A5AA5; u32 rdata = 0; if (!atomic_read(&ilits->ice_stat)) { ILI_ERR("ice mode doesn't enable\n"); return -1; } if (ili_ice_mode_write(WDT9_DUMMY2, wdata, sizeof(u32)) < 0) ILI_ERR("Write dummy error\n"); if (ili_ice_mode_read(WDT9_DUMMY2, &rdata, sizeof(u32)) < 0) ILI_ERR("Read dummy error\n"); if (rdata != wdata) { ILI_ERR("Dummy check incorrect, rdata = %x wdata = %x \n", rdata, wdata); return -1; } ILI_INFO("Ilitek IC check successe\n"); return ret; } static struct ilitek_ic_info chip; void ili_ic_init(void) { chip.pid_addr = TDDI_PID_ADDR; chip.pc_counter_addr = TDDI_PC_COUNTER_ADDR; chip.pc_latch_addr = TDDI_PC_LATCH_ADDR; chip.otp_addr = TDDI_OTP_ID_ADDR; chip.ana_addr = TDDI_ANA_ID_ADDR; chip.reset_addr = TDDI_CHIP_RESET_ADDR; ilits->protocol = &protocol_info[PROTOCL_VER_NUM - 1]; ilits->chip = &chip; }